From faf57162e462eafe87458e21bf641f9d138f8171 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Tue, 20 Oct 2009 11:10:59 +0900 Subject: [PATCH] wimax/i2400m: handle USB stalls When the device stalls, clear it and retry; if it keeps failing too often, reset the device. This specially happens when running on virtual machines; the real hardware doesn't seem to trip on stalls too much, except for a few reports in the mailing list (still to be confirmed this is the cause, although it seems likely. NOTE: it is not clear if the URB has to be resubmitted fully or start only at the offset of the first transaction sent. Can't find documentation to clarify one end or the other. Tests that just resubmit the whole URB seemed to work in my environment. Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/usb-fw.c | 22 ++++++++++++ drivers/net/wimax/i2400m/usb-rx.c | 21 ++++++++++++ drivers/net/wimax/i2400m/usb-tx.c | 22 ++++++++++++ drivers/net/wimax/i2400m/usb.c | 57 +++++++++++++++++++++++++++---- 4 files changed, 116 insertions(+), 6 deletions(-) diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c index 8ec8b6d56a1..d8f6ce29eff 100644 --- a/drivers/net/wimax/i2400m/usb-fw.c +++ b/drivers/net/wimax/i2400m/usb-fw.c @@ -113,6 +113,28 @@ retry: } result = len; break; + case -EPIPE: + /* + * Stall -- maybe the device is choking with our + * requests. Clear it and give it some time. If they + * happen to often, it might be another symptom, so we + * reset. + * + * No error handling for usb_clear_halt(0; if it + * works, the retry works; if it fails, this switch + * does the error handling for us. + */ + if (edc_inc(&i2400mu->urb_edc, + 10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "BM-CMD: too many stalls in " + "URB; resetting device\n"); + usb_queue_reset_device(i2400mu->usb_iface); + /* fallthrough */ + } else { + usb_clear_halt(i2400mu->usb_dev, pipe); + msleep(10); /* give the device some time */ + goto retry; + } case -EINVAL: /* while removing driver */ case -ENODEV: /* dev disconnect ... */ case -ENOENT: /* just ignore it */ diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c index 22d127bf79e..ba1b02362df 100644 --- a/drivers/net/wimax/i2400m/usb-rx.c +++ b/drivers/net/wimax/i2400m/usb-rx.c @@ -222,6 +222,26 @@ retry: goto retry; /* ZLP, just resubmit */ skb_put(rx_skb, read_size); break; + case -EPIPE: + /* + * Stall -- maybe the device is choking with our + * requests. Clear it and give it some time. If they + * happen to often, it might be another symptom, so we + * reset. + * + * No error handling for usb_clear_halt(0; if it + * works, the retry works; if it fails, this switch + * does the error handling for us. + */ + if (edc_inc(&i2400mu->urb_edc, + 10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "BM-CMD: too many stalls in " + "URB; resetting device\n"); + goto do_reset; + } + usb_clear_halt(i2400mu->usb_dev, usb_pipe); + msleep(10); /* give the device some time */ + goto retry; case -EINVAL: /* while removing driver */ case -ENODEV: /* dev disconnect ... */ case -ENOENT: /* just ignore it */ @@ -283,6 +303,7 @@ out: error_reset: dev_err(dev, "RX: maximum errors in URB exceeded; " "resetting device\n"); +do_reset: usb_queue_reset_device(i2400mu->usb_iface); rx_skb = ERR_PTR(result); goto out; diff --git a/drivers/net/wimax/i2400m/usb-tx.c b/drivers/net/wimax/i2400m/usb-tx.c index 6cdf0036a14..c65b9979f87 100644 --- a/drivers/net/wimax/i2400m/usb-tx.c +++ b/drivers/net/wimax/i2400m/usb-tx.c @@ -115,6 +115,28 @@ retry: result = -EIO; } break; + case -EPIPE: + /* + * Stall -- maybe the device is choking with our + * requests. Clear it and give it some time. If they + * happen to often, it might be another symptom, so we + * reset. + * + * No error handling for usb_clear_halt(0; if it + * works, the retry works; if it fails, this switch + * does the error handling for us. + */ + if (edc_inc(&i2400mu->urb_edc, + 10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "BM-CMD: too many stalls in " + "URB; resetting device\n"); + usb_queue_reset_device(i2400mu->usb_iface); + /* fallthrough */ + } else { + usb_clear_halt(i2400mu->usb_dev, usb_pipe); + msleep(10); /* give the device some time */ + goto retry; + } case -EINVAL: /* while removing driver */ case -ENODEV: /* dev disconnect ... */ case -ENOENT: /* just ignore it */ diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index 34df0906caa..47e84ef355c 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -172,14 +172,59 @@ int __i2400mu_send_barker(struct i2400mu *i2400mu, epd = usb_get_epd(i2400mu->usb_iface, endpoint); pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress); memcpy(buffer, barker, barker_size); +retry: ret = usb_bulk_msg(i2400mu->usb_dev, pipe, buffer, barker_size, &actual_len, 200); - if (ret < 0) { - if (ret != -EINVAL) - dev_err(dev, "E: barker error: %d\n", ret); - } else if (actual_len != barker_size) { - dev_err(dev, "E: only %d bytes transmitted\n", actual_len); - ret = -EIO; + switch (ret) { + case 0: + if (actual_len != barker_size) { /* Too short? drop it */ + dev_err(dev, "E: %s: short write (%d B vs %zu " + "expected)\n", + __func__, actual_len, barker_size); + ret = -EIO; + } + break; + case -EPIPE: + /* + * Stall -- maybe the device is choking with our + * requests. Clear it and give it some time. If they + * happen to often, it might be another symptom, so we + * reset. + * + * No error handling for usb_clear_halt(0; if it + * works, the retry works; if it fails, this switch + * does the error handling for us. + */ + if (edc_inc(&i2400mu->urb_edc, + 10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "E: %s: too many stalls in " + "URB; resetting device\n", __func__); + usb_queue_reset_device(i2400mu->usb_iface); + /* fallthrough */ + } else { + usb_clear_halt(i2400mu->usb_dev, pipe); + msleep(10); /* give the device some time */ + goto retry; + } + case -EINVAL: /* while removing driver */ + case -ENODEV: /* dev disconnect ... */ + case -ENOENT: /* just ignore it */ + case -ESHUTDOWN: /* and exit */ + case -ECONNRESET: + ret = -ESHUTDOWN; + break; + default: /* Some error? */ + if (edc_inc(&i2400mu->urb_edc, + EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "E: %s: maximum errors in URB " + "exceeded; resetting device\n", + __func__); + usb_queue_reset_device(i2400mu->usb_iface); + } else { + dev_warn(dev, "W: %s: cannot send URB: %d\n", + __func__, ret); + goto retry; + } } kfree(buffer); error_kzalloc: -- 2.41.0