From d7ea10d9cbddd49bab282adef805203a36e43101 Mon Sep 17 00:00:00 2001 From: Pavel Pisa Date: Mon, 5 Feb 2007 16:10:20 -0800 Subject: [PATCH] [ARM] i.MX serial: fix IRQ allocation If RTS interrupt is caused by RTS senzing logic inside i.MX UART module the IRQ type cannot be set. It applies only for interrupts going through GPIO layer. The problem has been noticed by Konstantin Kletschke some time ago. No IRQF_TRIGGER set_type function for IRQ 26 (MPU) I would not change type to fixed 0, because it could be possible to use different GPIO MX1 pin for RTS in the theory. On the other hand it is only for documentation purposes now, because RTS read code would have to be adjusted in such case. Signed-off-by: Andrew Morton Signed-off-by: Russell King --- drivers/serial/imx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 03b495c2de1..04cc88cc528 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -403,7 +403,8 @@ static int imx_startup(struct uart_port *port) if (retval) goto error_out2; retval = request_irq(sport->rtsirq, imx_rtsint, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + (sport->rtsirq < IMX_IRQS) ? 0 : + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, DRIVER_NAME, sport); if (retval) goto error_out3; -- 2.41.0