From c8dce0088a645c21cfb7e554390a4603e0e2139f Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Tue, 12 Jun 2012 18:19:28 -0300 Subject: [PATCH] [media] em28xx: Improve support for the Terratec Cinergy HTC Stick HD The windows driver used different values for the GPIOs and analog decoder configuration. The values from the windows driver are now used. It also seems that the windows driver has LNA always disabled. Thus we are doing the same (using the same flags as on windows). I (only) tested with DVB-T and it worked quite well. [mchehab@redhat.com: Fix merge conflicts and tested with DVB-C] Signed-off-by: Martin Blumenstingl Tested-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 8 +-- drivers/media/video/em28xx/em28xx-dvb.c | 83 ++++++++++++++++++++++- 2 files changed, 84 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 20a7e24de6f..12bc54af431 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -974,12 +974,8 @@ struct em28xx_board em28xx_boards[] = { [EM2884_BOARD_CINERGY_HTC_STICK] = { .name = "Terratec Cinergy HTC Stick", .has_dvb = 1, -#if 0 - .tuner_type = TUNER_PHILIPS_TDA8290, - .tuner_addr = 0x41, - .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ - .tuner_gpio = terratec_h5_gpio, -#endif + .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, + .tuner_type = TUNER_ABSENT, .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 241a71a7692..f8ffe102d29 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -325,6 +325,18 @@ static struct drxk_config hauppauge_930c_drxk = { .chunk_size = 56, }; +struct drxk_config terratec_htc_stick_drxk = { + .adr = 0x29, + .single_master = 1, + .no_i2c_bridge = 1, + .microcode_name = "dvb-usb-terratec-htc-stick-drxk.fw", + .chunk_size = 54, + /* Required for the antenna_gpio to disable LNA. */ + .antenna_dvbt = true, + /* The windows driver uses the same. This will disable LNA. */ + .antenna_gpio = 0x6, +}; + static struct drxk_config maxmedia_ub425_tc_drxk = { .adr = 0x29, .single_master = 1, @@ -473,6 +485,57 @@ static void terratec_h5_init(struct em28xx *dev) em28xx_gpio_set(dev, terratec_h5_end); }; +static void terratec_htc_stick_init(struct em28xx *dev) +{ + int i; + + /* + * GPIO configuration: + * 0xff: unknown (does not affect DVB-T). + * 0xf6: DRX-K (demodulator). + * 0xe6: unknown (does not affect DVB-T). + * 0xb6: unknown (does not affect DVB-T). + */ + struct em28xx_reg_seq terratec_htc_stick_init[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM2874_R80_GPIO, 0xf6, 0xff, 100}, + {EM2874_R80_GPIO, 0xe6, 0xff, 50}, + {EM2874_R80_GPIO, 0xf6, 0xff, 100}, + { -1, -1, -1, -1}, + }; + struct em28xx_reg_seq terratec_htc_stick_end[] = { + {EM2874_R80_GPIO, 0xb6, 0xff, 100}, + {EM2874_R80_GPIO, 0xf6, 0xff, 50}, + { -1, -1, -1, -1}, + }; + + /* Init the analog decoder? */ + struct { + unsigned char r[4]; + int len; + } regs[] = { + {{ 0x06, 0x02, 0x00, 0x31 }, 4}, + {{ 0x01, 0x02 }, 2}, + {{ 0x01, 0x02, 0x00, 0xc6 }, 4}, + {{ 0x01, 0x00 }, 2}, + {{ 0x01, 0x00, 0xff, 0xaf }, 4}, + }; + + em28xx_gpio_set(dev, terratec_htc_stick_init); + + em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40); + msleep(10); + em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44); + msleep(10); + + dev->i2c_client.addr = 0x82 >> 1; + + for (i = 0; i < ARRAY_SIZE(regs); i++) + i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len); + + em28xx_gpio_set(dev, terratec_htc_stick_end); +}; + static void pctv_520e_init(struct em28xx *dev) { /* @@ -944,7 +1007,6 @@ static int em28xx_dvb_init(struct em28xx *dev) break; } case EM2884_BOARD_TERRATEC_H5: - case EM2884_BOARD_CINERGY_HTC_STICK: terratec_h5_init(dev); dvb->fe[0] = dvb_attach(drxk_attach, &terratec_h5_drxk, &dev->i2c_adap); @@ -1021,6 +1083,25 @@ static int em28xx_dvb_init(struct em28xx *dev) } } break; + case EM2884_BOARD_CINERGY_HTC_STICK: + terratec_htc_stick_init(dev); + + /* attach demodulator */ + dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk, + &dev->i2c_adap); + if (!dvb->fe[0]) { + result = -EINVAL; + goto out_free; + } + + /* Attach the demodulator. */ + if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60, + &dev->i2c_adap, + &em28xx_cxd2820r_tda18271_config)) { + result = -EINVAL; + goto out_free; + } + break; default: em28xx_errdev("/2: The frontend of your DVB/ATSC card" " isn't supported yet\n"); -- 2.41.0