From c6ecf39a10ceec3e97096e2a8d3eadcecd593422 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Fri, 3 Dec 2010 03:31:51 +0000 Subject: [PATCH] ixgbe: fix link behavior for SFP+ when driver is brought down We have had several requests to have ifconfig down command disable the SFP+ laser and thus make link go down. Likewise on ifconfig up the laser would be enabled and link would come up. This patch enables that behavior. Signed-off-by: Don Skidmore Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_82599.c | 12 +++++++++--- drivers/net/ixgbe/ixgbe_main.c | 26 ++++++++++++++++++-------- 2 files changed, 27 insertions(+), 11 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index e34643eef16..8fa76785b45 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -65,9 +65,9 @@ static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; - if (hw->phy.multispeed_fiber) { - /* Set up dual speed SFP+ support */ - mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; + + /* enable the laser control functions for SFP+ fiber */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) { mac->ops.disable_tx_laser = &ixgbe_disable_tx_laser_multispeed_fiber; mac->ops.enable_tx_laser = @@ -77,6 +77,12 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) mac->ops.disable_tx_laser = NULL; mac->ops.enable_tx_laser = NULL; mac->ops.flap_tx_laser = NULL; + } + + if (hw->phy.multispeed_fiber) { + /* Set up dual speed SFP+ support */ + mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; + } else { if ((mac->ops.get_media_type(hw) == ixgbe_media_type_backplane) && (hw->phy.smart_speed == ixgbe_smart_speed_auto || diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 494cb57b700..5861ece7020 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3793,8 +3793,11 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) else ixgbe_configure_msi_and_legacy(adapter); - /* enable the optics */ - if (hw->phy.multispeed_fiber && hw->mac.ops.enable_tx_laser) + /* enable the optics for both mult-speed fiber and 82599 SFP+ fiber */ + if (hw->mac.ops.enable_tx_laser && + ((hw->phy.multispeed_fiber) || + ((hw->phy.type == ixgbe_media_type_fiber) && + (hw->mac.type == ixgbe_mac_82599EB)))) hw->mac.ops.enable_tx_laser(hw); clear_bit(__IXGBE_DOWN, &adapter->state); @@ -4106,15 +4109,19 @@ void ixgbe_down(struct ixgbe_adapter *adapter) break; } - /* power down the optics */ - if (hw->phy.multispeed_fiber && hw->mac.ops.disable_tx_laser) - hw->mac.ops.disable_tx_laser(hw); - /* clear n-tuple filters that are cached */ ethtool_ntuple_flush(netdev); if (!pci_channel_offline(adapter->pdev)) ixgbe_reset(adapter); + + /* power down the optics for multispeed fiber and 82599 SFP+ fiber */ + if (hw->mac.ops.disable_tx_laser && + ((hw->phy.multispeed_fiber) || + ((hw->phy.type == ixgbe_media_type_fiber) && + (hw->mac.type == ixgbe_mac_82599EB)))) + hw->mac.ops.disable_tx_laser(hw); + ixgbe_clean_all_tx_rings(adapter); ixgbe_clean_all_rx_rings(adapter); @@ -7197,8 +7204,11 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, goto err_eeprom; } - /* power down the optics */ - if (hw->phy.multispeed_fiber && hw->mac.ops.disable_tx_laser) + /* power down the optics for multispeed fiber and 82599 SFP+ fiber */ + if (hw->mac.ops.disable_tx_laser && + ((hw->phy.multispeed_fiber) || + ((hw->phy.type == ixgbe_media_type_fiber) && + (hw->mac.type == ixgbe_mac_82599EB)))) hw->mac.ops.disable_tx_laser(hw); init_timer(&adapter->watchdog_timer); -- 2.41.0