From c45c6c68333c04de84c21a4b869f36a96f642779 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 15 Apr 2008 11:36:20 +0100 Subject: [PATCH] [MTD] [NAND] S3C2410 Allow unset ecc to be ignored for ecc correction If a block's ecc field is all 0xff, then ignore the ECC correction. This is for systems where some of the blocks, such as the initial cramfs are written without ECC and need to be loaded on start. Signed-off-by: Ben Dooks Signed-off-by: David Woodhouse --- drivers/mtd/nand/s3c2410.c | 8 ++++++++ include/asm-arm/plat-s3c/nand.h | 2 ++ 2 files changed, 10 insertions(+) diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 15397e0f396..35401f7b930 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -357,6 +357,14 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, if (diff0 == 0 && diff1 == 0 && diff2 == 0) return 0; /* ECC is ok */ + /* sometimes people do not think about using the ECC, so check + * to see if we have an 0xff,0xff,0xff read ECC and then ignore + * the error, on the assumption that this is an un-eccd page. + */ + if (read_ecc[0] == 0xff && read_ecc[1] == 0xff && read_ecc[2] == 0xff + && info->platform->ignore_unset_ecc) + return 0; + /* Can we correct this ECC (ie, one row and column change). * Note, this is similar to the 256 error code on smartmedia */ diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h index 8816f7f9cee..ab278d5f63d 100644 --- a/include/asm-arm/plat-s3c/nand.h +++ b/include/asm-arm/plat-s3c/nand.h @@ -36,6 +36,8 @@ struct s3c2410_platform_nand { int twrph0; /* active time for nWE/nOE */ int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ + unsigned int ignore_unset_ecc : 1; + int nr_sets; struct s3c2410_nand_set *sets; -- 2.41.0