From b3110cd8cf8d2cff9f39e3e6fe8fb88ed7642105 Mon Sep 17 00:00:00 2001 From: Matthias Beyer Date: Mon, 23 Jun 2014 21:25:15 +0200 Subject: [PATCH] Staging: bcm: Outsourced selecting of alternate setting This patch outsources a chunk of code which is for selecting an alternate setting for highspeed modem into a new function. Signed-off-by: Matthias Beyer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/bcm/InterfaceInit.c | 207 +++++++++++++++------------- 1 file changed, 112 insertions(+), 95 deletions(-) diff --git a/drivers/staging/bcm/InterfaceInit.c b/drivers/staging/bcm/InterfaceInit.c index bda33c8af80..9f9045d569f 100644 --- a/drivers/staging/bcm/InterfaceInit.c +++ b/drivers/staging/bcm/InterfaceInit.c @@ -374,6 +374,113 @@ static int device_run(struct bcm_interface_adapter *psIntfAdapter) return 0; } +static int select_alternate_setting_for_highspeed_modem( + struct bcm_interface_adapter *psIntfAdapter, + struct usb_endpoint_descriptor **endpoint, + const struct usb_host_interface *iface_desc, + int *usedIntOutForBulkTransfer) +{ + int retval = 0; + struct bcm_mini_adapter *psAd = psIntfAdapter->psAdapter; + + /* selecting alternate setting one as a default setting + * for High Speed modem. */ + if (psIntfAdapter->bHighSpeedDevice) + retval = usb_set_interface(psIntfAdapter->udev, + DEFAULT_SETTING_0, + ALTERNATE_SETTING_1); + BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, DRV_ENTRY, + DBG_LVL_ALL, + "BCM16 is applicable on this dongle\n"); + if (retval || !psIntfAdapter->bHighSpeedDevice) { + *usedIntOutForBulkTransfer = EP2; + *endpoint = &iface_desc->endpoint[EP2].desc; + BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, + DRV_ENTRY, DBG_LVL_ALL, + "Interface altsetting failed or modem is configured to Full Speed, hence will work on default setting 0\n"); + /* + * If Modem is high speed device EP2 should be + * INT OUT End point + * + * If Mode is FS then EP2 should be bulk end + * point + */ + if ((psIntfAdapter->bHighSpeedDevice && + !usb_endpoint_is_int_out(*endpoint)) || + (!psIntfAdapter->bHighSpeedDevice && + !usb_endpoint_is_bulk_out(*endpoint))) { + BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, + DRV_ENTRY, DBG_LVL_ALL, + "Configuring the EEPROM\n"); + /* change the EP2, EP4 to INT OUT end point */ + ConfigureEndPointTypesThroughEEPROM( + psAd); + + /* + * It resets the device and if any thing + * gets changed in USB descriptor it + * will show fail and re-enumerate the + * device + */ + retval = usb_reset_device( + psIntfAdapter->udev); + if (retval) { + BCM_DEBUG_PRINT(psAd, + DBG_TYPE_INITEXIT, + DRV_ENTRY, + DBG_LVL_ALL, + "reset failed. Re-enumerating the device.\n"); + return retval; + } + + } + if (!psIntfAdapter->bHighSpeedDevice && + usb_endpoint_is_bulk_out(*endpoint)) { + /* Once BULK is selected in FS mode. Revert it back to INT. Else USB_IF will fail. */ + UINT _uiData = ntohl(EP2_CFG_INT); + BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, + DRV_ENTRY, DBG_LVL_ALL, + "Reverting Bulk to INT as it is in Full Speed mode.\n"); + BeceemEEPROMBulkWrite(psAd, + (PUCHAR) & _uiData, + 0x136, 4, TRUE); + } + } else { + *usedIntOutForBulkTransfer = EP4; + *endpoint = &iface_desc->endpoint[EP4].desc; + BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, + DRV_ENTRY, DBG_LVL_ALL, + "Choosing AltSetting as a default setting.\n"); + if (!usb_endpoint_is_int_out(*endpoint)) { + BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, + DRV_ENTRY, DBG_LVL_ALL, + "Dongle does not have BCM16 Fix.\n"); + /* change the EP2, EP4 to INT OUT end point and use EP4 in altsetting */ + ConfigureEndPointTypesThroughEEPROM( + psAd); + + /* + * It resets the device and if any thing + * gets changed in USB descriptor it + * will show fail and re-enumerate the + * device + */ + retval = usb_reset_device( + psIntfAdapter->udev); + if (retval) { + BCM_DEBUG_PRINT(psAd, + DBG_TYPE_INITEXIT, + DRV_ENTRY, + DBG_LVL_ALL, + "reset failed. Re-enumerating the device.\n"); + return retval; + } + } + } + + return 0; +} + static int InterfaceAdapterInit(struct bcm_interface_adapter *psIntfAdapter) { struct usb_host_interface *iface_desc; @@ -425,101 +532,11 @@ static int InterfaceAdapterInit(struct bcm_interface_adapter *psIntfAdapter) psIntfAdapter->interface->num_altsetting); if (bBcm16 == TRUE) { - /* selecting alternate setting one as a default setting - * for High Speed modem. */ - if (psIntfAdapter->bHighSpeedDevice) - retval = usb_set_interface(psIntfAdapter->udev, - DEFAULT_SETTING_0, - ALTERNATE_SETTING_1); - BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, DRV_ENTRY, - DBG_LVL_ALL, - "BCM16 is applicable on this dongle\n"); - if (retval || !psIntfAdapter->bHighSpeedDevice) { - usedIntOutForBulkTransfer = EP2; - endpoint = &iface_desc->endpoint[EP2].desc; - BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, - DRV_ENTRY, DBG_LVL_ALL, - "Interface altsetting failed or modem is configured to Full Speed, hence will work on default setting 0\n"); - /* - * If Modem is high speed device EP2 should be - * INT OUT End point - * - * If Mode is FS then EP2 should be bulk end - * point - */ - if ((psIntfAdapter->bHighSpeedDevice && - !usb_endpoint_is_int_out(endpoint)) || - (!psIntfAdapter->bHighSpeedDevice && - !usb_endpoint_is_bulk_out(endpoint))) { - BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, - DRV_ENTRY, DBG_LVL_ALL, - "Configuring the EEPROM\n"); - /* change the EP2, EP4 to INT OUT end point */ - ConfigureEndPointTypesThroughEEPROM( - psAd); - - /* - * It resets the device and if any thing - * gets changed in USB descriptor it - * will show fail and re-enumerate the - * device - */ - retval = usb_reset_device( - psIntfAdapter->udev); - if (retval) { - BCM_DEBUG_PRINT(psAd, - DBG_TYPE_INITEXIT, - DRV_ENTRY, - DBG_LVL_ALL, - "reset failed. Re-enumerating the device.\n"); - return retval; - } - - } - if (!psIntfAdapter->bHighSpeedDevice && - usb_endpoint_is_bulk_out(endpoint)) { - /* Once BULK is selected in FS mode. Revert it back to INT. Else USB_IF will fail. */ - UINT _uiData = ntohl(EP2_CFG_INT); - BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, - DRV_ENTRY, DBG_LVL_ALL, - "Reverting Bulk to INT as it is in Full Speed mode.\n"); - BeceemEEPROMBulkWrite(psAd, - (PUCHAR) & _uiData, - 0x136, 4, TRUE); - } - } else { - usedIntOutForBulkTransfer = EP4; - endpoint = &iface_desc->endpoint[EP4].desc; - BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, - DRV_ENTRY, DBG_LVL_ALL, - "Choosing AltSetting as a default setting.\n"); - if (!usb_endpoint_is_int_out(endpoint)) { - BCM_DEBUG_PRINT(psAd, DBG_TYPE_INITEXIT, - DRV_ENTRY, DBG_LVL_ALL, - "Dongle does not have BCM16 Fix.\n"); - /* change the EP2, EP4 to INT OUT end point and use EP4 in altsetting */ - ConfigureEndPointTypesThroughEEPROM( - psAd); - - /* - * It resets the device and if any thing - * gets changed in USB descriptor it - * will show fail and re-enumerate the - * device - */ - retval = usb_reset_device( - psIntfAdapter->udev); - if (retval) { - BCM_DEBUG_PRINT(psAd, - DBG_TYPE_INITEXIT, - DRV_ENTRY, - DBG_LVL_ALL, - "reset failed. Re-enumerating the device.\n"); - return retval; - } - - } - } + retval = select_alternate_setting_for_highspeed_modem( + psIntfAdapter, &endpoint, iface_desc, + &usedIntOutForBulkTransfer); + if (retval) + return retval; } } -- 2.46.0