From a9c130d522ddef8673728fa9738f4f3f8e61f9b9 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Thu, 10 May 2012 12:13:37 +0300 Subject: [PATCH] wl18xx: add board type module argument Different board types (ie. FPGA, HDK and DVP/EVB) require slightly different init configuration options. Since we cannot probe the type of board from the actual hardware, we need to pass it as an option during module load. This patch adds a module parameters that accepts the 3 different board types, with DVP/EVB as the default, and uses this value where needed. Signed-off-by: Luciano Coelho Signed-off-by: Arik Nemtsov --- drivers/net/wireless/ti/wl18xx/main.c | 26 +++++++++++++++++++++++-- drivers/net/wireless/ti/wl18xx/wl18xx.h | 2 ++ 2 files changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 17792e2a984..e5ebf4a14ba 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -42,6 +42,7 @@ #define WL18XX_RX_CHECKSUM_MASK 0x40 static char *ht_mode_param; +static char *board_type_param; static const u8 wl18xx_rate_to_idx_2ghz[] = { /* MCS rates are used only with 11n */ @@ -680,8 +681,7 @@ static void wl18xx_set_mac_and_phy(struct wl1271 *wl) params.secondary_clock_setting_time = phy->secondary_clock_setting_time; - /* TODO: hardcoded for now */ - params.board_type = BOARD_TYPE_DVP_EVB_18XX; + params.board_type = priv->board_type; wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]); wl1271_write(wl, WL18XX_PHY_INIT_MEM_ADDR, (u8 *)¶ms, @@ -964,6 +964,7 @@ int __devinit wl18xx_probe(struct platform_device *pdev) } wl = hw->priv; + priv = wl->priv; wl->ops = &wl18xx_ops; wl->ptable = wl18xx_ptable; wl->rtable = wl18xx_rtable; @@ -979,6 +980,24 @@ int __devinit wl18xx_probe(struct platform_device *pdev) memcpy(&wl->ht_cap, &wl18xx_mimo_ht_cap, sizeof(wl18xx_mimo_ht_cap)); + if (!board_type_param) { + board_type_param = kstrdup("dvp_evb", GFP_KERNEL); + priv->board_type = BOARD_TYPE_DVP_EVB_18XX; + } else { + if (!strcmp(board_type_param, "fpga")) + priv->board_type = BOARD_TYPE_FPGA_18XX; + else if (!strcmp(board_type_param, "hdk")) + priv->board_type = BOARD_TYPE_HDK_18XX; + else if (!strcmp(board_type_param, "dvp_evb")) + priv->board_type = BOARD_TYPE_DVP_EVB_18XX; + else { + wl1271_error("invalid board type '%s'", + board_type_param); + wlcore_free_hw(wl); + return -EINVAL; + } + } + wl18xx_conf_init(wl); return wlcore_probe(wl, pdev); @@ -1015,6 +1034,9 @@ module_exit(wl18xx_exit); module_param_named(ht_mode, ht_mode_param, charp, S_IRUSR); MODULE_PARM_DESC(ht_mode, "Force HT mode: wide or mimo"); +module_param_named(board_type, board_type_param, charp, S_IRUSR); +MODULE_PARM_DESC(board_type, "Board type: fpga, hdk or dvp_evb (default)"); + MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Luciano Coelho "); MODULE_FIRMWARE(WL18XX_FW_NAME); diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h index c9bf5c6559f..5bcc7f09f8c 100644 --- a/drivers/net/wireless/ti/wl18xx/wl18xx.h +++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h @@ -34,6 +34,8 @@ struct wl18xx_priv { /* Index of last released Tx desc in FW */ u8 last_fw_rls_idx; + + u8 board_type; }; #define WL18XX_FW_MAX_TX_STATUS_DESC 33 -- 2.41.0