From 9dcbf35afb7359466efdf7fb81ee32f3ae2d56a3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 12 May 2008 13:57:18 -0300 Subject: [PATCH] V4L/DVB (7887): cx18: fix Compro H900 analog support. Tuner, S-Video and Composite are all working for the Compro H900. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-cards.c | 12 ++++--- drivers/media/video/cx18/cx18-cards.h | 5 +-- drivers/media/video/cx18/cx18-gpio.c | 47 ++++++++++++++++++++------- 3 files changed, 46 insertions(+), 18 deletions(-) diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index bf6f7edca88..0f2bfb4ba84 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -135,14 +135,15 @@ static const struct cx18_card_pci_info cx18_pci_h900[] = { static const struct cx18_card cx18_card_h900 = { .type = CX18_CARD_COMPRO_H900, .name = "Compro VideoMate H900", - .comment = "Not yet supported!\n", - .v4l2_capabilities = 0, + .comment = "DVB & VBI are not yet supported\n", + .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, .video_inputs = { - { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 }, - { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 }, - { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 }, + { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX23418_SVIDEO_LUMA3 | CX23418_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE1 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, @@ -164,6 +165,7 @@ static const struct cx18_card cx18_card_h900 = { .tune_lane = 0, .initial_emrs = 0, }, + .xceive_pin = 15, .pci_list = cx18_pci_h900, .i2c = &cx18_i2c_std, }; diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h index bca249bdd33..bccb67f0db1 100644 --- a/drivers/media/video/cx18/cx18-cards.h +++ b/drivers/media/video/cx18/cx18-cards.h @@ -114,8 +114,8 @@ struct cx18_card_pci_info { /* The mask is the set of bits used by the operation */ struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */ - u16 direction; /* DIR setting. Leave to 0 if no init is needed */ - u16 initial_value; + u32 direction; /* DIR setting. Leave to 0 if no init is needed */ + u32 initial_value; }; struct cx18_card_tuner { @@ -153,6 +153,7 @@ struct cx18_card { struct cx18_card_audio_input radio_input; /* GPIO card-specific settings */ + u8 xceive_pin; /* XCeive tuner GPIO reset pin */ struct cx18_gpio_init gpio_init; struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS]; diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index 19253e6b867..bb8bc86086d 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -35,6 +35,9 @@ #define CX18_REG_GPIO_OUT2 0xc78104 #define CX18_REG_GPIO_DIR2 0xc7810c +static u32 gpio_dir; +static u32 gpio_val; + /* * HVR-1600 GPIO pins, courtesy of Hauppauge: * @@ -44,31 +47,53 @@ * gpio13: cs5345 reset pin */ +static void gpio_write(struct cx18 *cx) +{ + write_reg((gpio_dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); + write_reg(((gpio_dir & 0xffff) << 16) | (gpio_val & 0xffff), + CX18_REG_GPIO_OUT1); + write_reg(gpio_dir & 0xffff0000, CX18_REG_GPIO_DIR2); + write_reg((gpio_dir & 0xffff0000) | ((gpio_val & 0xffff0000) >> 16), + CX18_REG_GPIO_OUT2); +} + void cx18_gpio_init(struct cx18 *cx) { - if (cx->card->gpio_init.direction == 0) + gpio_dir = cx->card->gpio_init.direction; + gpio_val = cx->card->gpio_init.initial_value; + + if (gpio_dir == 0) return; - CX18_DEBUG_INFO("GPIO initial dir: %08x out: %08x\n", - read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_OUT1)); + gpio_dir |= 1 << cx->card->xceive_pin; + gpio_val |= 1 << cx->card->xceive_pin; - /* init output data then direction */ - write_reg(cx->card->gpio_init.direction << 16, CX18_REG_GPIO_DIR1); - write_reg(0, CX18_REG_GPIO_DIR2); - write_reg((cx->card->gpio_init.direction << 16) | - cx->card->gpio_init.initial_value, CX18_REG_GPIO_OUT1); - write_reg(0, CX18_REG_GPIO_OUT2); + CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", + read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2), + read_reg(CX18_REG_GPIO_OUT1), read_reg(CX18_REG_GPIO_OUT2)); + + gpio_write(cx); } /* Xceive tuner reset function */ int cx18_reset_tuner_gpio(void *dev, int cmd, int value) { struct i2c_algo_bit_data *algo = dev; - struct cx18 *cx = algo->data; -/* int curdir, curout;*/ + struct cx18_i2c_algo_callback_data *cb_data = algo->data; + struct cx18 *cx = cb_data->cx; if (cmd != XC2028_TUNER_RESET) return 0; CX18_DEBUG_INFO("Resetting tuner\n"); + + gpio_dir |= 1 << cx->card->xceive_pin; + gpio_val &= ~(1 << cx->card->xceive_pin); + + gpio_write(cx); + schedule_timeout_interruptible(msecs_to_jiffies(1)); + + gpio_val |= 1 << cx->card->xceive_pin; + gpio_write(cx); + schedule_timeout_interruptible(msecs_to_jiffies(1)); return 0; } -- 2.41.0