From 9ca33ccd539e67f6042d813146bf1b65605fa5c4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 6 Dec 2013 06:48:49 -0300 Subject: [PATCH] [media] si4713: coding style whitespace cleanups Fix most whitespace-related checkpatch errors/warnings. Signed-off-by: Hans Verkuil Acked-by: Eduardo Valentin Acked-by: Dinesh Ram Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/si4713/si4713.c | 96 +++++++++++++++-------------- 1 file changed, 49 insertions(+), 47 deletions(-) diff --git a/drivers/media/radio/si4713/si4713.c b/drivers/media/radio/si4713/si4713.c index 6f28a2b91ed..4c3498f0503 100644 --- a/drivers/media/radio/si4713/si4713.c +++ b/drivers/media/radio/si4713/si4713.c @@ -50,12 +50,12 @@ MODULE_VERSION("0.0.1"); #define DEFAULT_RDS_PS_REPEAT_COUNT 0x0003 #define DEFAULT_LIMITER_RTIME 0x1392 #define DEFAULT_LIMITER_DEV 0x102CA -#define DEFAULT_PILOT_FREQUENCY 0x4A38 +#define DEFAULT_PILOT_FREQUENCY 0x4A38 #define DEFAULT_PILOT_DEVIATION 0x1A5E #define DEFAULT_ACOMP_ATIME 0x0000 #define DEFAULT_ACOMP_RTIME 0xF4240L #define DEFAULT_ACOMP_GAIN 0x0F -#define DEFAULT_ACOMP_THRESHOLD (-0x28) +#define DEFAULT_ACOMP_THRESHOLD (-0x28) #define DEFAULT_MUTE 0x01 #define DEFAULT_POWER_LEVEL 88 #define DEFAULT_FREQUENCY 8800 @@ -269,9 +269,9 @@ static int si4713_read_property(struct si4713_device *sdev, u16 prop, u32 *pv) int err; u8 val[SI4713_GET_PROP_NRESP]; /* - * .First byte = 0 - * .Second byte = property's MSB - * .Third byte = property's LSB + * .First byte = 0 + * .Second byte = property's MSB + * .Third byte = property's LSB */ const u8 args[SI4713_GET_PROP_NARGS] = { 0x00, @@ -306,11 +306,11 @@ static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val) int rval; u8 resp[SI4713_SET_PROP_NRESP]; /* - * .First byte = 0 - * .Second byte = property's MSB - * .Third byte = property's LSB - * .Fourth byte = value's MSB - * .Fifth byte = value's LSB + * .First byte = 0 + * .Second byte = property's MSB + * .Third byte = property's LSB + * .Fourth byte = value's MSB + * .Fifth byte = value's LSB */ const u8 args[SI4713_SET_PROP_NARGS] = { 0x00, @@ -352,8 +352,8 @@ static int si4713_powerup(struct si4713_device *sdev) int err; u8 resp[SI4713_PWUP_NRESP]; /* - * .First byte = Enabled interrupts and boot function - * .Second byte = Input operation mode + * .First byte = Enabled interrupts and boot function + * .Second byte = Input operation mode */ u8 args[SI4713_PWUP_NARGS] = { SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX, @@ -515,8 +515,8 @@ static int si4713_wait_stc(struct si4713_device *sdev, const int usecs) /* * si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning - * frequency between 76 and 108 MHz in 10 kHz units and - * steps of 50 kHz. + * frequency between 76 and 108 MHz in 10 kHz units and + * steps of 50 kHz. * @sdev: si4713_device structure for the device we are communicating * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz) */ @@ -525,9 +525,9 @@ static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency) int err; u8 val[SI4713_TXFREQ_NRESP]; /* - * .First byte = 0 - * .Second byte = frequency's MSB - * .Third byte = frequency's LSB + * .First byte = 0 + * .Second byte = frequency's MSB + * .Third byte = frequency's LSB */ const u8 args[SI4713_TXFREQ_NARGS] = { 0x00, @@ -555,11 +555,11 @@ static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency) /* * si4713_tx_tune_power - Sets the RF voltage level between 88 and 120 dBuV in - * 1 dB units. A value of 0x00 indicates off. The command - * also sets the antenna tuning capacitance. A value of 0 - * indicates autotuning, and a value of 1 - 191 indicates - * a manual override, which results in a tuning - * capacitance of 0.25 pF x @antcap. + * 1 dB units. A value of 0x00 indicates off. The command + * also sets the antenna tuning capacitance. A value of 0 + * indicates autotuning, and a value of 1 - 191 indicates + * a manual override, which results in a tuning + * capacitance of 0.25 pF x @antcap. * @sdev: si4713_device structure for the device we are communicating * @power: tuning power (88 - 120 dBuV, unit/step 1 dB) * @antcap: value of antenna tuning capacitor (0 - 191) @@ -570,10 +570,10 @@ static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power, int err; u8 val[SI4713_TXPWR_NRESP]; /* - * .First byte = 0 - * .Second byte = 0 - * .Third byte = power - * .Fourth byte = antcap + * .First byte = 0 + * .Second byte = 0 + * .Third byte = power + * .Fourth byte = antcap */ u8 args[SI4713_TXPWR_NARGS] = { 0x00, @@ -602,12 +602,12 @@ static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power, /* * si4713_tx_tune_measure - Enters receive mode and measures the received noise - * level in units of dBuV on the selected frequency. - * The Frequency must be between 76 and 108 MHz in 10 kHz - * units and steps of 50 kHz. The command also sets the - * antenna tuning capacitance. A value of 0 means - * autotuning, and a value of 1 to 191 indicates manual - * override. + * level in units of dBuV on the selected frequency. + * The Frequency must be between 76 and 108 MHz in 10 kHz + * units and steps of 50 kHz. The command also sets the + * antenna tuning capacitance. A value of 0 means + * autotuning, and a value of 1 to 191 indicates manual + * override. * @sdev: si4713_device structure for the device we are communicating * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz) * @antcap: value of antenna tuning capacitor (0 - 191) @@ -618,10 +618,10 @@ static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency, int err; u8 val[SI4713_TXMEA_NRESP]; /* - * .First byte = 0 - * .Second byte = frequency's MSB - * .Third byte = frequency's LSB - * .Fourth byte = antcap + * .First byte = 0 + * .Second byte = frequency's MSB + * .Third byte = frequency's LSB + * .Fourth byte = antcap */ const u8 args[SI4713_TXMEA_NARGS] = { 0x00, @@ -651,11 +651,11 @@ static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency, /* * si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or - * tx_tune_power commands. This command return the current - * frequency, output voltage in dBuV, the antenna tunning - * capacitance value and the received noise level. The - * command also clears the stcint interrupt bit when the - * first bit of its arguments is high. + * tx_tune_power commands. This command return the current + * frequency, output voltage in dBuV, the antenna tunning + * capacitance value and the received noise level. The + * command also clears the stcint interrupt bit when the + * first bit of its arguments is high. * @sdev: si4713_device structure for the device we are communicating * @intack: 0x01 to clear the seek/tune complete interrupt status indicator. * @frequency: returned frequency @@ -670,7 +670,7 @@ static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack, int err; u8 val[SI4713_TXSTATUS_NRESP]; /* - * .First byte = intack bit + * .First byte = intack bit */ const u8 args[SI4713_TXSTATUS_NARGS] = { intack & SI4713_INTACK_MASK, @@ -1364,7 +1364,7 @@ static int si4713_probe(struct i2c_client *client, struct v4l2_ctrl_handler *hdl; int rval, i; - sdev = kzalloc(sizeof *sdev, GFP_KERNEL); + sdev = kzalloc(sizeof(*sdev), GFP_KERNEL); if (!sdev) { dev_err(&client->dev, "Failed to alloc video device.\n"); rval = -ENOMEM; @@ -1440,8 +1440,8 @@ static int si4713_probe(struct i2c_client *client, V4L2_CID_AUDIO_COMPRESSION_GAIN, 0, MAX_ACOMP_GAIN, 1, DEFAULT_ACOMP_GAIN); sdev->compression_threshold = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, - V4L2_CID_AUDIO_COMPRESSION_THRESHOLD, MIN_ACOMP_THRESHOLD, - MAX_ACOMP_THRESHOLD, 1, + V4L2_CID_AUDIO_COMPRESSION_THRESHOLD, + MIN_ACOMP_THRESHOLD, MAX_ACOMP_THRESHOLD, 1, DEFAULT_ACOMP_THRESHOLD); sdev->compression_attack_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME, 0, @@ -1463,9 +1463,11 @@ static int si4713_probe(struct i2c_client *client, V4L2_CID_TUNE_PREEMPHASIS, V4L2_PREEMPHASIS_75_uS, 0, V4L2_PREEMPHASIS_50_uS); sdev->tune_pwr_level = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, - V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER, 1, DEFAULT_POWER_LEVEL); + V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER, + 1, DEFAULT_POWER_LEVEL); sdev->tune_ant_cap = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, - V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP, 1, 0); + V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP, + 1, 0); if (hdl->error) { rval = hdl->error; -- 2.46.0