From 952cdf333f9d1b0b71f1b9a3c5e421a2673ed7de Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Thu, 26 Mar 2009 16:39:24 +0000 Subject: [PATCH] cxgb3: differentiate portx and Tx channels Separate ports from H/W Tx channels. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/common.h | 4 +++- drivers/net/cxgb3/cxgb3_main.c | 4 ++-- drivers/net/cxgb3/t3_hw.c | 35 ++++++++++++++++++---------------- 3 files changed, 24 insertions(+), 19 deletions(-) mode change 100755 => 100644 drivers/net/cxgb3/cxgb3_main.c mode change 100755 => 100644 drivers/net/cxgb3/t3_hw.c diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h index 9ee021e750c..e508dc32f3e 100644 --- a/drivers/net/cxgb3/common.h +++ b/drivers/net/cxgb3/common.h @@ -191,7 +191,8 @@ struct mdio_ops { }; struct adapter_info { - unsigned char nports; /* # of ports */ + unsigned char nports0; /* # of ports on channel 0 */ + unsigned char nports1; /* # of ports on channel 1 */ unsigned char phy_base_addr; /* MDIO PHY base address */ unsigned int gpio_out; /* GPIO output settings */ unsigned char gpio_intr[MAX_NPORTS]; /* GPIO PHY IRQ pins */ @@ -422,6 +423,7 @@ struct adapter_params { unsigned short b_wnd[NCCTRL_WIN]; unsigned int nports; /* # of ethernet ports */ + unsigned int chan_map; /* bitmap of in-use Tx channels */ unsigned int stats_update_period; /* MAC stats accumulation period */ unsigned int linkpoll_period; /* link poll period in 0.1s */ unsigned int rev; /* chip revision */ diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c old mode 100755 new mode 100644 index e2b119312a0..2c2aaa74145 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -3086,7 +3086,7 @@ static int __devinit init_one(struct pci_dev *pdev, INIT_WORK(&adapter->fatal_error_handler_task, fatal_error_task); INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task); - for (i = 0; i < ai->nports; ++i) { + for (i = 0; i < ai->nports0 + ai->nports1; ++i) { struct net_device *netdev; netdev = alloc_etherdev_mq(sizeof(struct port_info), SGE_QSETS); @@ -3176,7 +3176,7 @@ static int __devinit init_one(struct pci_dev *pdev, out_free_dev: iounmap(adapter->regs); - for (i = ai->nports - 1; i >= 0; --i) + for (i = ai->nports0 + ai->nports1 - 1; i >= 0; --i) if (adapter->port[i]) free_netdev(adapter->port[i]); diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c old mode 100755 new mode 100644 index 7d8fbae58dc..31ed31a3428 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -493,20 +493,20 @@ int t3_phy_lasi_intr_handler(struct cphy *phy) } static const struct adapter_info t3_adap_info[] = { - {2, 0, + {1, 1, 0, F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, { S_GPIO3, S_GPIO5 }, 0, &mi1_mdio_ops, "Chelsio PE9000"}, - {2, 0, + {1, 1, 0, F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, { S_GPIO3, S_GPIO5 }, 0, &mi1_mdio_ops, "Chelsio T302"}, - {1, 0, + {1, 0, 0, F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, { 0 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI, &mi1_mdio_ext_ops, "Chelsio T310"}, - {2, 0, + {1, 1, 0, F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL | F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, @@ -514,7 +514,7 @@ static const struct adapter_info t3_adap_info[] = { &mi1_mdio_ext_ops, "Chelsio T320"}, {}, {}, - {1, 0, + {1, 0, 0, F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI, @@ -3227,20 +3227,22 @@ int t3_mps_set_active_ports(struct adapter *adap, unsigned int port_mask) } /* - * Perform the bits of HW initialization that are dependent on the number - * of available ports. + * Perform the bits of HW initialization that are dependent on the Tx + * channels being used. */ -static void init_hw_for_avail_ports(struct adapter *adap, int nports) +static void chan_init_hw(struct adapter *adap, unsigned int chan_map) { int i; - if (nports == 1) { + if (chan_map != 3) { /* one channel */ t3_set_reg_field(adap, A_ULPRX_CTL, F_ROUND_ROBIN, 0); t3_set_reg_field(adap, A_ULPTX_CONFIG, F_CFG_RR_ARB, 0); - t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_TPTXPORT0EN | - F_PORT0ACTIVE | F_ENFORCEPKT); - t3_write_reg(adap, A_PM1_TX_CFG, 0xffffffff); - } else { + t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_ENFORCEPKT | + (chan_map == 1 ? F_TPTXPORT0EN | F_PORT0ACTIVE : + F_TPTXPORT1EN | F_PORT1ACTIVE)); + t3_write_reg(adap, A_PM1_TX_CFG, + chan_map == 1 ? 0xffffffff : 0); + } else { /* two channels */ t3_set_reg_field(adap, A_ULPRX_CTL, 0, F_ROUND_ROBIN); t3_set_reg_field(adap, A_ULPTX_CONFIG, 0, F_CFG_RR_ARB); t3_write_reg(adap, A_ULPTX_DMA_WEIGHT, @@ -3548,7 +3550,7 @@ int t3_init_hw(struct adapter *adapter, u32 fw_params) t3_write_reg(adapter, A_PM1_RX_CFG, 0xffffffff); t3_write_reg(adapter, A_PM1_RX_MODE, 0); t3_write_reg(adapter, A_PM1_TX_MODE, 0); - init_hw_for_avail_ports(adapter, adapter->params.nports); + chan_init_hw(adapter, adapter->params.chan_map); t3_sge_init(adapter, &adapter->params.sge); t3_write_reg(adapter, A_T3DBG_GPIO_ACT_LOW, calc_gpio_intr(adapter)); @@ -3785,7 +3787,8 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, get_pci_mode(adapter, &adapter->params.pci); adapter->params.info = ai; - adapter->params.nports = ai->nports; + adapter->params.nports = ai->nports0 + ai->nports1; + adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1); adapter->params.rev = t3_read_reg(adapter, A_PL_REV); /* * We used to only run the "adapter check task" once a second if @@ -3816,7 +3819,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, mc7_prep(adapter, &adapter->pmtx, MC7_PMTX_BASE_ADDR, "PMTX"); mc7_prep(adapter, &adapter->cm, MC7_CM_BASE_ADDR, "CM"); - p->nchan = ai->nports; + p->nchan = adapter->params.chan_map == 3 ? 2 : 1; p->pmrx_size = t3_mc7_size(&adapter->pmrx); p->pmtx_size = t3_mc7_size(&adapter->pmtx); p->cm_size = t3_mc7_size(&adapter->cm); -- 2.41.0