From 941d71c7361815c02e2b2831bbb9f06a504a3d24 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 4 Nov 2011 00:48:57 -0500 Subject: [PATCH] powerpc/85xx: Rework P2020RDB device tree Utilize new split between board & SoC, and new SoC device trees split into pre & post utilizing 'template' includes for SoC IP blocks. Other changes include: * Moved to specifying interrupt-parent for mpic at root * Moved to 4-cell mpic interrupt cells to support MPIC timers * Reworked PCIe nodes to allow supportin IRQs for controller (errors) and moved PCI device IRQs down to virtual bridge level * Updated spi node to new espi binding specification * Renamed 'sdhci' node to 'sdhc' * Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' as the 'mpc8572' compatiable is to deal with a 'mpc8572' specific to an erratum * Fixed wrong reg offsets for mdio nodes associated with etsec2 & * etsec3 * Dropping "fsl,p2020-IP..." from compatibles for standard blocks Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p2020rdb.dts | 63 +--- arch/powerpc/boot/dts/p2020rdb_camp_core0.dts | 141 +------ arch/powerpc/boot/dts/p2020rdb_camp_core1.dts | 107 +----- arch/powerpc/boot/dts/p2020si.dtsi | 355 ------------------ 4 files changed, 22 insertions(+), 644 deletions(-) delete mode 100644 arch/powerpc/boot/dts/p2020si.dtsi diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts index 1d7a05f3021..fd4271296f8 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "fsl/p2020si-pre.dtsi" / { model = "fsl,P2020RDB"; @@ -29,7 +29,8 @@ device_type = "memory"; }; - localbus@ffe05000 { + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; /* NOR and NAND Flashes */ ranges = <0x0 0x0 0x0 0xef000000 0x01000000 @@ -140,7 +141,9 @@ }; - soc@ffe00000 { + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + i2c@3000 { rtc@68 { compatible = "dallas,ds1339"; @@ -148,17 +151,13 @@ }; }; - spi@7000 { - - fsl_m25p80@0 { + spi@7000 { + flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,espi-flash"; + compatible = "spansion,s25sl12801"; reg = <0>; - linux,modalias = "fsl_m25p80"; - modal = "s25sl128b"; spi-max-frequency = <50000000>; - mode = <0>; partition@0 { /* 512KB for u-boot Bootloader Image */ @@ -202,13 +201,11 @@ mdio@24520 { phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; + interrupts = <3 1 0 0>; reg = <0x0>; }; phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; + interrupts = <3 1 0 0>; reg = <0x1>; }; }; @@ -224,11 +221,7 @@ status = "disabled"; }; - ptp_clock@24E00 { - compatible = "fsl,etsec-ptp"; - reg = <0x24E00 0xB0>; - interrupts = <68 2 69 2 70 2>; - interrupt-parent = < &mpic >; + ptp_clock@24e00 { fsl,tclk-period = <5>; fsl,tmr-prsc = <200>; fsl,tmr-add = <0xCCCCCCCD>; @@ -252,29 +245,18 @@ phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; }; - }; pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; status = "disabled"; }; pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; + pcie@0 { ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -286,21 +268,10 @@ }; pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -311,3 +282,5 @@ }; }; }; + +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts index fc8ddddfccb..66aac864c4c 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts @@ -14,28 +14,16 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "p2020rdb.dts" / { model = "fsl,P2020RDB"; compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; - aliases { - ethernet1 = &enet1; - ethernet2 = &enet2; - serial0 = &serial0; - pci0 = &pci0; - }; - cpus { PowerPC,P2020@1 { - status = "disabled"; + status = "disabled"; }; - - }; - - memory { - device_type = "memory"; }; localbus@ffe05000 { @@ -43,115 +31,18 @@ }; soc@ffe00000 { - i2c@3000 { - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - }; - }; - serial1: serial@4600 { status = "disabled"; }; - spi@7000 { - - fsl_m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,espi-flash"; - reg = <0>; - linux,modalias = "fsl_m25p80"; - modal = "s25sl128b"; - spi-max-frequency = <50000000>; - mode = <0>; - - partition@0 { - /* 512KB for u-boot Bootloader Image */ - reg = <0x0 0x00080000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@80000 { - /* 512KB for DTB Image */ - reg = <0x00080000 0x00080000>; - label = "SPI (RO) DTB Image"; - read-only; - }; - - partition@100000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00100000 0x00400000>; - label = "SPI (RO) Linux Kernel Image"; - read-only; - }; - - partition@500000 { - /* 4MB for Compressed RFS Image */ - reg = <0x00500000 0x00400000>; - label = "SPI (RO) Compressed RFS Image"; - read-only; - }; - - partition@900000 { - /* 7MB for JFFS2 based RFS */ - reg = <0x00900000 0x00700000>; - label = "SPI (RW) JFFS2 RFS"; - }; - }; - }; - dma@c300 { status = "disabled"; }; - usb@22000 { - phy_type = "ulpi"; - }; - - mdio@24520 { - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x1>; - }; - }; - - mdio@25520 { - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - status = "disabled"; - }; - enet0: ethernet@24000 { status = "disabled"; }; - enet1: ethernet@25000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "sgmii"; - - }; - - enet2: ethernet@26000 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - - mpic: pic@40000 { protected-sources = < 42 76 77 78 79 /* serial1 , dma2 */ @@ -164,40 +55,12 @@ msi@41600 { status = "disabled"; }; - - }; pci0: pcie@ffe08000 { status = "disabled"; }; - pci1: pcie@ffe09000 { - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - pci2: pcie@ffe0a000 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts index 261c34ba45e..9bd8ef493dd 100644 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts @@ -15,28 +15,18 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "p2020rdb.dts" / { model = "fsl,P2020RDB"; compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; - aliases { - ethernet0 = &enet0; - serial0 = &serial1; - pci1 = &pci1; - }; - cpus { PowerPC,P2020@0 { - status = "disabled"; + status = "disabled"; }; }; - memory { - device_type = "memory"; - }; - localbus@ffe05000 { status = "disabled"; }; @@ -70,55 +60,10 @@ status = "disabled"; }; - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - gpio: gpio-controller@f000 { status = "disabled"; }; - L2: l2-cache-controller@20000 { - compatible = "fsl,p2020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2,512K - interrupt-parent = <&mpic>; - }; - dma@21300 { status = "disabled"; }; @@ -139,12 +84,6 @@ status = "disabled"; }; - enet0: ethernet@24000 { - fixed-link = <1 1 1000 0 0>; - phy-connection-type = "rgmii-id"; - - }; - enet1: ethernet@25000 { status = "disabled"; }; @@ -170,22 +109,6 @@ >; }; - msi@41600 { - compatible = "fsl,p2020-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - global-utilities@e0000 { //global utilities block status = "disabled"; }; @@ -199,30 +122,4 @@ pci1: pcie@ffe09000 { status = "disabled"; }; - - pci2: pcie@ffe0a000 { - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; }; diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi deleted file mode 100644 index 37f7194186c..00000000000 --- a/arch/powerpc/boot/dts/p2020si.dtsi +++ /dev/null @@ -1,355 +0,0 @@ -/* - * P2020 Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; -/ { - compatible = "fsl,P2020"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,P2020@0 { - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - - PowerPC,P2020@1 { - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&L2>; - }; - }; - - localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; - reg = <0 0xffe05000 0 0x1000>; - interrupts = <19 2 0 0>; - }; - - soc@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,p2020-immr", "simple-bus"; - ranges = <0x0 0x0 0xffe00000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <12>; - }; - - ecm@1000 { - compatible = "fsl,p2020-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2 0 0>; - }; - - memory-controller@2000 { - compatible = "fsl,p2020-memory-controller"; - reg = <0x2000 0x1000>; - interrupts = <18 2 0 0>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2 0 0>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2 0 0>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2 0 0>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2 0 0>; - }; - - spi@7000 { - cell-index = <0>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,espi"; - reg = <0x7000 0x1000>; - interrupts = <59 0x2 0 0>; - mode = "cpu"; - }; - - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0xc300 0x4>; - ranges = <0x0 0xc100 0x200>; - cell-index = <1>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <76 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <77 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <78 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <79 2 0 0>; - }; - }; - - gpio: gpio-controller@f000 { - #gpio-cells = <2>; - compatible = "fsl,mpc8572-gpio"; - reg = <0xf000 0x100>; - interrupts = <47 0x2 0 0>; - gpio-controller; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,p2020-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2,512K - interrupts = <16 2 0 0>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupts = <20 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupts = <21 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupts = <22 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupts = <23 2 0 0>; - }; - }; - - usb@22000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - interrupts = <28 0x2 0 0>; - }; - - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - }; - - mdio@25520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x26520 0x20>; - }; - - mdio@26520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; - - }; - - enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; - - }; - - sdhci@2e000 { - compatible = "fsl,p2020-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2 0 0>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - crypto@30000 { - compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", - "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2 0 0 58 2 0 0>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xbfe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,p2020-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,p2020-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@ffe08000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe08000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupts = <24 2 0 0>; - }; - - pci1: pcie@ffe09000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe09000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupts = <25 2 0 0>; - }; - - pci2: pcie@ffe0a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0 0xffe0a000 0 0x1000>; - bus-range = <0 255>; - clock-frequency = <33333333>; - interrupts = <26 2 0 0>; - }; -}; -- 2.46.0