From 9124544320bd36d5aa21769d17a5781ba729aebf Mon Sep 17 00:00:00 2001 From: Philippe Bourdin Date: Sun, 31 Oct 2010 09:57:58 -0300 Subject: [PATCH] [media] Terratec Cinergy Hybrid T USB XS I found that the problems people have reported with the USB-TV-stick "Terratec Cinergy Hybrid T USB XS" (USB-ID: 0ccd:0042) are coming from a wrong header file in the v4l-sources. Attached is a diff, which fixes the problem (tested successfully here). Obviously the USB-ID has been associated with a wrong chip: EM2880 instead of EM2882, which would be correct. Reported-by: Philippe Bourdin Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ed25c5579c3..5d79d0eb64a 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1496,7 +1496,7 @@ struct em28xx_board em28xx_boards[] = { } }, }, [EM2882_BOARD_TERRATEC_HYBRID_XS] = { - .name = "Terratec Hybrid XS (em2882)", + .name = "Terratec Cinnergy Hybrid T USB XS (em2882)", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, @@ -1820,7 +1820,7 @@ struct usb_device_id em28xx_id_table[] = { { USB_DEVICE(0x0ccd, 0x005e), .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, { USB_DEVICE(0x0ccd, 0x0042), - .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS }, + .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, { USB_DEVICE(0x0ccd, 0x0043), .driver_info = EM2870_BOARD_TERRATEC_XS }, { USB_DEVICE(0x0ccd, 0x0047), -- 2.41.0