From 8d72b4a6cf3d1bac5e2d61acb6abaee254426779 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 17 Nov 2012 17:00:53 +0100 Subject: [PATCH] ARM: Kirkwood: Convert lsxl boards to pinctrl. Signed-off-by: Andrew Lunn Tested-by: Michael Walle Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-lsxl.dtsi | 66 ++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/board-lsxl.c | 19 -------- 2 files changed, 66 insertions(+), 19 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 32d302ed2ed..37d45c4f88f 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { chosen { @@ -6,6 +7,71 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus + &pmx_fan_low &pmx_fan_high + &pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_fan_lock &pmx_button_function + &pmx_power_switch &pmx_power_auto_switch + &pmx_led_function_blue >; + pinctrl-names = "default"; + + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp10"; + marvell,function = "gpo"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp18"; + marvell,function = "gpo"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp19"; + marvell,function = "gpo"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function_red { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + }; sata@80000 { status = "okay"; nr-ports = <1>; diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c index f780e2e0c5d..d60cdab46f4 100644 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -20,7 +20,6 @@ #include #include #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data lsxl_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), @@ -30,23 +29,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int lsxl_mpp_config[] __initdata = { - MPP10_GPO, /* HDD Power Enable */ - MPP11_GPIO, /* USB Vbus Enable */ - MPP18_GPO, /* FAN High Enable# */ - MPP19_GPO, /* FAN Low Enable# */ - MPP36_GPIO, /* Function Blue LED */ - MPP37_GPIO, /* Alarm LED */ - MPP38_GPIO, /* Info LED */ - MPP39_GPIO, /* Power LED */ - MPP40_GPIO, /* Fan Lock */ - MPP41_GPIO, /* Function Button */ - MPP42_GPIO, /* Power Switch */ - MPP43_GPIO, /* Power Auto Switch */ - MPP48_GPIO, /* Function Red LED */ - 0 -}; - /* * On the LS-XHL/LS-CHLv2, the shutdown process is following: * - Userland monitors key events until the power switch goes to off position @@ -65,7 +47,6 @@ void __init lsxl_init(void) /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(lsxl_mpp_config); kirkwood_ge00_init(&lsxl_ge00_data); kirkwood_ge01_init(&lsxl_ge01_data); -- 2.46.0