From 733596bea6ba7ea7949720b86794eda4e1b793d1 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 27 Jun 2008 10:59:59 -0700 Subject: [PATCH] igb: cleanup function header comments Function header comments do not match function name. Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/e1000_82575.c | 48 ++++++++++++------------- drivers/net/igb/e1000_mac.c | 66 +++++++++++++++++------------------ drivers/net/igb/e1000_nvm.c | 30 ++++++++-------- drivers/net/igb/e1000_phy.c | 62 ++++++++++++++++---------------- 4 files changed, 103 insertions(+), 103 deletions(-) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index 39d44dc072e..e6dd387fdb0 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -226,7 +226,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) } /** - * e1000_acquire_phy_82575 - Acquire rights to access PHY + * igb_acquire_phy_82575 - Acquire rights to access PHY * @hw: pointer to the HW structure * * Acquire access rights to the correct PHY. This is a @@ -242,7 +242,7 @@ static s32 igb_acquire_phy_82575(struct e1000_hw *hw) } /** - * e1000_release_phy_82575 - Release rights to access PHY + * igb_release_phy_82575 - Release rights to access PHY * @hw: pointer to the HW structure * * A wrapper to release access rights to the correct PHY. This is a @@ -257,7 +257,7 @@ static void igb_release_phy_82575(struct e1000_hw *hw) } /** - * e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii + * igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data @@ -310,7 +310,7 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, } /** - * e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii + * igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset @@ -365,7 +365,7 @@ static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, } /** - * e1000_get_phy_id_82575 - Retreive PHY addr and id + * igb_get_phy_id_82575 - Retrieve PHY addr and id * @hw: pointer to the HW structure * * Retreives the PHY address and ID for both PHY's which do and do not use @@ -426,7 +426,7 @@ out: } /** - * e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset + * igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset * @hw: pointer to the HW structure * * Resets the PHY using the serial gigabit media independent interface. @@ -457,7 +457,7 @@ out: } /** - * e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state + * igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state * @hw: pointer to the HW structure * @active: true to enable LPLU, false to disable * @@ -543,7 +543,7 @@ out: } /** - * e1000_acquire_nvm_82575 - Request for access to EEPROM + * igb_acquire_nvm_82575 - Request for access to EEPROM * @hw: pointer to the HW structure * * Acquire the necessary semaphores for exclussive access to the EEPROM. @@ -569,7 +569,7 @@ out: } /** - * e1000_release_nvm_82575 - Release exclusive access to EEPROM + * igb_release_nvm_82575 - Release exclusive access to EEPROM * @hw: pointer to the HW structure * * Stop any current commands to the EEPROM and clear the EEPROM request bit, @@ -582,7 +582,7 @@ static void igb_release_nvm_82575(struct e1000_hw *hw) } /** - * e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore + * igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore * @hw: pointer to the HW structure * @mask: specifies which semaphore to acquire * @@ -632,7 +632,7 @@ out: } /** - * e1000_release_swfw_sync_82575 - Release SW/FW semaphore + * igb_release_swfw_sync_82575 - Release SW/FW semaphore * @hw: pointer to the HW structure * @mask: specifies which semaphore to acquire * @@ -654,7 +654,7 @@ static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask) } /** - * e1000_get_cfg_done_82575 - Read config done bit + * igb_get_cfg_done_82575 - Read config done bit * @hw: pointer to the HW structure * * Read the management control register for the config done bit for @@ -690,7 +690,7 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *hw) } /** - * e1000_check_for_link_82575 - Check for link + * igb_check_for_link_82575 - Check for link * @hw: pointer to the HW structure * * If sgmii is enabled, then use the pcs register to determine link, otherwise @@ -713,7 +713,7 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) } /** - * e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex + * igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex @@ -768,7 +768,7 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, } /** - * e1000_rar_set_82575 - Set receive address register + * igb_rar_set_82575 - Set receive address register * @hw: pointer to the HW structure * @addr: pointer to the receive address * @index: receive address array register @@ -785,7 +785,7 @@ static void igb_rar_set_82575(struct e1000_hw *hw, u8 *addr, u32 index) } /** - * e1000_reset_hw_82575 - Reset hardware + * igb_reset_hw_82575 - Reset hardware * @hw: pointer to the HW structure * * This resets the hardware into a known state. This is a @@ -842,7 +842,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) } /** - * e1000_init_hw_82575 - Initialize hardware + * igb_init_hw_82575 - Initialize hardware * @hw: pointer to the HW structure * * This inits the hardware readying it for operation. @@ -886,7 +886,7 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) } /** - * e1000_setup_copper_link_82575 - Configure copper link settings + * igb_setup_copper_link_82575 - Configure copper link settings * @hw: pointer to the HW structure * * Configures the link for auto-neg or forced speed and duplex. Then we check @@ -974,7 +974,7 @@ out: } /** - * e1000_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes + * igb_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes * @hw: pointer to the HW structure * * Configures speed and duplex for fiber and serdes links. @@ -1038,7 +1038,7 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) } /** - * e1000_configure_pcs_link_82575 - Configure PCS link + * igb_configure_pcs_link_82575 - Configure PCS link * @hw: pointer to the HW structure * * Configure the physical coding sub-layer (PCS) link. The PCS link is @@ -1103,7 +1103,7 @@ out: } /** - * e1000_sgmii_active_82575 - Return sgmii state + * igb_sgmii_active_82575 - Return sgmii state * @hw: pointer to the HW structure * * 82575 silicon has a serialized gigabit media independent interface (sgmii) @@ -1129,7 +1129,7 @@ out: } /** - * e1000_reset_init_script_82575 - Inits HW defaults after reset + * igb_reset_init_script_82575 - Inits HW defaults after reset * @hw: pointer to the HW structure * * Inits recommended HW defaults after a reset when there is no EEPROM @@ -1165,7 +1165,7 @@ static s32 igb_reset_init_script_82575(struct e1000_hw *hw) } /** - * e1000_read_mac_addr_82575 - Read device MAC address + * igb_read_mac_addr_82575 - Read device MAC address * @hw: pointer to the HW structure **/ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw) @@ -1179,7 +1179,7 @@ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw) } /** - * e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters + * igb_clear_hw_cntrs_82575 - Clear device specific hardware counters * @hw: pointer to the HW structure * * Clears the hardware counters by reading the counter registers. diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 3e84a3f0c1d..0dadcfdfa17 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -39,7 +39,7 @@ static s32 igb_set_fc_watermarks(struct e1000_hw *hw); static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); /** - * e1000_remove_device - Free device specific structure + * igb_remove_device - Free device specific structure * @hw: pointer to the HW structure * * If a device specific structure was allocated, this function will @@ -73,7 +73,7 @@ static s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) } /** - * e1000_get_bus_info_pcie - Get PCIe bus information + * igb_get_bus_info_pcie - Get PCIe bus information * @hw: pointer to the HW structure * * Determines and stores the system bus information for a particular @@ -113,7 +113,7 @@ s32 igb_get_bus_info_pcie(struct e1000_hw *hw) } /** - * e1000_clear_vfta - Clear VLAN filter table + * igb_clear_vfta - Clear VLAN filter table * @hw: pointer to the HW structure * * Clears the register array which contains the VLAN filter table by @@ -130,7 +130,7 @@ void igb_clear_vfta(struct e1000_hw *hw) } /** - * e1000_write_vfta - Write value to VLAN filter table + * igb_write_vfta - Write value to VLAN filter table * @hw: pointer to the HW structure * @offset: register offset in VLAN filter table * @value: register value written to VLAN filter table @@ -145,7 +145,7 @@ void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) } /** - * e1000_init_rx_addrs - Initialize receive address's + * igb_init_rx_addrs - Initialize receive address's * @hw: pointer to the HW structure * @rar_count: receive address registers * @@ -173,7 +173,7 @@ void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) } /** - * e1000_check_alt_mac_addr - Check for alternate MAC addr + * igb_check_alt_mac_addr - Check for alternate MAC addr * @hw: pointer to the HW structure * * Checks the nvm for an alternate MAC address. An alternate MAC address @@ -233,7 +233,7 @@ out: } /** - * e1000_rar_set - Set receive address register + * igb_rar_set - Set receive address register * @hw: pointer to the HW structure * @addr: pointer to the receive address * @index: receive address array register @@ -263,7 +263,7 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) } /** - * e1000_mta_set - Set multicast filter table address + * igb_mta_set - Set multicast filter table address * @hw: pointer to the HW structure * @hash_value: determines the MTA register and bit to set * @@ -298,7 +298,7 @@ static void igb_mta_set(struct e1000_hw *hw, u32 hash_value) } /** - * e1000_update_mc_addr_list - Update Multicast addresses + * igb_update_mc_addr_list - Update Multicast addresses * @hw: pointer to the HW structure * @mc_addr_list: array of multicast addresses to program * @mc_addr_count: number of multicast addresses to program @@ -352,7 +352,7 @@ void igb_update_mc_addr_list(struct e1000_hw *hw, } /** - * e1000_hash_mc_addr - Generate a multicast hash value + * igb_hash_mc_addr - Generate a multicast hash value * @hw: pointer to the HW structure * @mc_addr: pointer to a multicast address * @@ -423,7 +423,7 @@ static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) } /** - * e1000_clear_hw_cntrs_base - Clear base hardware counters + * igb_clear_hw_cntrs_base - Clear base hardware counters * @hw: pointer to the HW structure * * Clears the base hardware counters by reading the counter registers. @@ -472,7 +472,7 @@ void igb_clear_hw_cntrs_base(struct e1000_hw *hw) } /** - * e1000_check_for_copper_link - Check for link (Copper) + * igb_check_for_copper_link - Check for link (Copper) * @hw: pointer to the HW structure * * Checks to see of the link status of the hardware has changed. If a @@ -547,7 +547,7 @@ out: } /** - * e1000_setup_link - Setup flow control and link settings + * igb_setup_link - Setup flow control and link settings * @hw: pointer to the HW structure * * Determines which flow control settings to use, then configures flow @@ -606,7 +606,7 @@ out: } /** - * e1000_config_collision_dist - Configure collision distance + * igb_config_collision_dist - Configure collision distance * @hw: pointer to the HW structure * * Configures the collision distance to the default value and is used @@ -627,7 +627,7 @@ void igb_config_collision_dist(struct e1000_hw *hw) } /** - * e1000_set_fc_watermarks - Set flow control high/low watermarks + * igb_set_fc_watermarks - Set flow control high/low watermarks * @hw: pointer to the HW structure * * Sets the flow control high/low threshold (watermark) registers. If @@ -665,7 +665,7 @@ static s32 igb_set_fc_watermarks(struct e1000_hw *hw) } /** - * e1000_set_default_fc - Set flow control default values + * igb_set_default_fc - Set flow control default values * @hw: pointer to the HW structure * * Read the EEPROM for the default values for flow control and store the @@ -706,7 +706,7 @@ out: } /** - * e1000_force_mac_fc - Force the MAC's flow control settings + * igb_force_mac_fc - Force the MAC's flow control settings * @hw: pointer to the HW structure * * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the @@ -770,7 +770,7 @@ out: } /** - * e1000_config_fc_after_link_up - Configures flow control after link + * igb_config_fc_after_link_up - Configures flow control after link * @hw: pointer to the HW structure * * Checks the status of auto-negotiation after link up to ensure that the @@ -991,7 +991,7 @@ out: } /** - * e1000_get_speed_and_duplex_copper - Retreive current speed/duplex + * igb_get_speed_and_duplex_copper - Retreive current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex @@ -1028,7 +1028,7 @@ s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, } /** - * e1000_get_hw_semaphore - Acquire hardware semaphore + * igb_get_hw_semaphore - Acquire hardware semaphore * @hw: pointer to the HW structure * * Acquire the HW semaphore to access the PHY or NVM @@ -1081,7 +1081,7 @@ out: } /** - * e1000_put_hw_semaphore - Release hardware semaphore + * igb_put_hw_semaphore - Release hardware semaphore * @hw: pointer to the HW structure * * Release hardware semaphore used to access the PHY or NVM @@ -1098,7 +1098,7 @@ void igb_put_hw_semaphore(struct e1000_hw *hw) } /** - * e1000_get_auto_rd_done - Check for auto read completion + * igb_get_auto_rd_done - Check for auto read completion * @hw: pointer to the HW structure * * Check EEPROM for Auto Read done bit. @@ -1127,7 +1127,7 @@ out: } /** - * e1000_valid_led_default - Verify a valid default LED config + * igb_valid_led_default - Verify a valid default LED config * @hw: pointer to the HW structure * @data: pointer to the NVM (EEPROM) * @@ -1152,7 +1152,7 @@ out: } /** - * e1000_id_led_init - + * igb_id_led_init - * @hw: pointer to the HW structure * **/ @@ -1217,7 +1217,7 @@ out: } /** - * e1000_cleanup_led - Set LED config to default operation + * igb_cleanup_led - Set LED config to default operation * @hw: pointer to the HW structure * * Remove the current LED configuration and set the LED configuration @@ -1230,7 +1230,7 @@ s32 igb_cleanup_led(struct e1000_hw *hw) } /** - * e1000_blink_led - Blink LED + * igb_blink_led - Blink LED * @hw: pointer to the HW structure * * Blink the led's which are set to be on. @@ -1263,7 +1263,7 @@ s32 igb_blink_led(struct e1000_hw *hw) } /** - * e1000_led_off - Turn LED off + * igb_led_off - Turn LED off * @hw: pointer to the HW structure * * Turn LED off. @@ -1290,7 +1290,7 @@ s32 igb_led_off(struct e1000_hw *hw) } /** - * e1000_disable_pcie_master - Disables PCI-express master access + * igb_disable_pcie_master - Disables PCI-express master access * @hw: pointer to the HW structure * * Returns 0 (0) if successful, else returns -10 @@ -1332,7 +1332,7 @@ out: } /** - * e1000_reset_adaptive - Reset Adaptive Interframe Spacing + * igb_reset_adaptive - Reset Adaptive Interframe Spacing * @hw: pointer to the HW structure * * Reset the Adaptive Interframe Spacing throttle to default values. @@ -1361,7 +1361,7 @@ out: } /** - * e1000_update_adaptive - Update Adaptive Interframe Spacing + * igb_update_adaptive - Update Adaptive Interframe Spacing * @hw: pointer to the HW structure * * Update the Adaptive Interframe Spacing Throttle value based on the @@ -1402,7 +1402,7 @@ out: } /** - * e1000_validate_mdi_setting - Verify MDI/MDIx settings + * igb_validate_mdi_setting - Verify MDI/MDIx settings * @hw: pointer to the HW structure * * Verify that when not using auto-negotitation that MDI/MDIx is correctly @@ -1424,7 +1424,7 @@ out: } /** - * e1000_write_8bit_ctrl_reg - Write a 8bit CTRL register + * igb_write_8bit_ctrl_reg - Write a 8bit CTRL register * @hw: pointer to the HW structure * @reg: 32bit register offset such as E1000_SCTL * @offset: register offset to write to @@ -1462,7 +1462,7 @@ out: } /** - * e1000_enable_mng_pass_thru - Enable processing of ARP's + * igb_enable_mng_pass_thru - Enable processing of ARP's * @hw: pointer to the HW structure * * Verifies the hardware needs to allow ARPs to be processed by the host. diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c index 2897106fee9..780ba798ce8 100644 --- a/drivers/net/igb/e1000_nvm.c +++ b/drivers/net/igb/e1000_nvm.c @@ -32,7 +32,7 @@ #include "e1000_nvm.h" /** - * e1000_raise_eec_clk - Raise EEPROM clock + * igb_raise_eec_clk - Raise EEPROM clock * @hw: pointer to the HW structure * @eecd: pointer to the EEPROM * @@ -47,7 +47,7 @@ static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) } /** - * e1000_lower_eec_clk - Lower EEPROM clock + * igb_lower_eec_clk - Lower EEPROM clock * @hw: pointer to the HW structure * @eecd: pointer to the EEPROM * @@ -62,7 +62,7 @@ static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) } /** - * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM + * igb_shift_out_eec_bits - Shift data bits our to the EEPROM * @hw: pointer to the HW structure * @data: data to send to the EEPROM * @count: number of bits to shift out @@ -105,7 +105,7 @@ static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) } /** - * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM + * igb_shift_in_eec_bits - Shift data bits in from the EEPROM * @hw: pointer to the HW structure * @count: number of bits to shift in * @@ -143,7 +143,7 @@ static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count) } /** - * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion + * igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion * @hw: pointer to the HW structure * @ee_reg: EEPROM flag for polling * @@ -174,7 +174,7 @@ static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) } /** - * e1000_acquire_nvm - Generic request for access to EEPROM + * igb_acquire_nvm - Generic request for access to EEPROM * @hw: pointer to the HW structure * * Set the EEPROM access request bit and wait for EEPROM access grant bit. @@ -210,7 +210,7 @@ s32 igb_acquire_nvm(struct e1000_hw *hw) } /** - * e1000_standby_nvm - Return EEPROM to standby state + * igb_standby_nvm - Return EEPROM to standby state * @hw: pointer to the HW structure * * Return the EEPROM to a standby state. @@ -273,7 +273,7 @@ static void e1000_stop_nvm(struct e1000_hw *hw) } /** - * e1000_release_nvm - Release exclusive access to EEPROM + * igb_release_nvm - Release exclusive access to EEPROM * @hw: pointer to the HW structure * * Stop any current commands to the EEPROM and clear the EEPROM request bit. @@ -290,7 +290,7 @@ void igb_release_nvm(struct e1000_hw *hw) } /** - * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write + * igb_ready_nvm_eeprom - Prepares EEPROM for read/write * @hw: pointer to the HW structure * * Setups the EEPROM for reading and writing. @@ -348,7 +348,7 @@ out: } /** - * e1000_read_nvm_eerd - Reads EEPROM using EERD register + * igb_read_nvm_eerd - Reads EEPROM using EERD register * @hw: pointer to the HW structure * @offset: offset of word in the EEPROM to read * @words: number of words to read @@ -391,7 +391,7 @@ out: } /** - * e1000_write_nvm_spi - Write to EEPROM using SPI + * igb_write_nvm_spi - Write to EEPROM using SPI * @hw: pointer to the HW structure * @offset: offset within the EEPROM to be written to * @words: number of words to write @@ -475,7 +475,7 @@ out: } /** - * e1000_read_part_num - Read device part number + * igb_read_part_num - Read device part number * @hw: pointer to the HW structure * @part_num: pointer to device part number * @@ -506,7 +506,7 @@ out: } /** - * e1000_read_mac_addr - Read device MAC address + * igb_read_mac_addr - Read device MAC address * @hw: pointer to the HW structure * * Reads the device MAC address from the EEPROM and stores the value. @@ -541,7 +541,7 @@ out: } /** - * e1000_validate_nvm_checksum - Validate EEPROM checksum + * igb_validate_nvm_checksum - Validate EEPROM checksum * @hw: pointer to the HW structure * * Calculates the EEPROM checksum by reading/adding each word of the EEPROM @@ -573,7 +573,7 @@ out: } /** - * e1000_update_nvm_checksum - Update EEPROM checksum + * igb_update_nvm_checksum - Update EEPROM checksum * @hw: pointer to the HW structure * * Updates the EEPROM checksum by reading/adding each word of the EEPROM diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index 08a86b10722..220e4716da9 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -61,7 +61,7 @@ static const u16 e1000_igp_2_cable_length_table[] = sizeof(e1000_igp_2_cable_length_table[0])) /** - * e1000_check_reset_block - Check if PHY reset is blocked + * igb_check_reset_block - Check if PHY reset is blocked * @hw: pointer to the HW structure * * Read the PHY management control register and check whether a PHY reset @@ -79,7 +79,7 @@ s32 igb_check_reset_block(struct e1000_hw *hw) } /** - * e1000_get_phy_id - Retrieve the PHY ID and revision + * igb_get_phy_id - Retrieve the PHY ID and revision * @hw: pointer to the HW structure * * Reads the PHY registers and stores the PHY ID and possibly the PHY @@ -109,7 +109,7 @@ out: } /** - * e1000_phy_reset_dsp - Reset PHY DSP + * igb_phy_reset_dsp - Reset PHY DSP * @hw: pointer to the HW structure * * Reset the digital signal processor. @@ -129,7 +129,7 @@ out: } /** - * e1000_read_phy_reg_mdic - Read MDI control register + * igb_read_phy_reg_mdic - Read MDI control register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data @@ -188,7 +188,7 @@ out: } /** - * e1000_write_phy_reg_mdic - Write MDI control register + * igb_write_phy_reg_mdic - Write MDI control register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write to register at offset @@ -246,7 +246,7 @@ out: } /** - * e1000_read_phy_reg_igp - Read igp PHY register + * igb_read_phy_reg_igp - Read igp PHY register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data @@ -284,7 +284,7 @@ out: } /** - * e1000_write_phy_reg_igp - Write igp PHY register + * igb_write_phy_reg_igp - Write igp PHY register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset @@ -321,7 +321,7 @@ out: } /** - * e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link + * igb_copper_link_setup_m88 - Setup m88 PHY's for copper link * @hw: pointer to the HW structure * * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock @@ -432,7 +432,7 @@ out: } /** - * e1000_copper_link_setup_igp - Setup igp PHY's for copper link + * igb_copper_link_setup_igp - Setup igp PHY's for copper link * @hw: pointer to the HW structure * * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for @@ -570,7 +570,7 @@ out: } /** - * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link + * igb_copper_link_autoneg - Setup/Enable autoneg for copper link * @hw: pointer to the HW structure * * Performs initial bounds checking on autoneg advertisement parameter, then @@ -638,7 +638,7 @@ out: } /** - * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation + * igb_phy_setup_autoneg - Configure PHY for auto-negotiation * @hw: pointer to the HW structure * * Reads the MII auto-neg advertisement register and/or the 1000T control @@ -805,7 +805,7 @@ out: } /** - * e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY + * igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY * @hw: pointer to the HW structure * * Calls the PHY setup function to force speed and duplex. Clears the @@ -878,7 +878,7 @@ out: } /** - * e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY + * igb_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY * @hw: pointer to the HW structure * * Calls the PHY setup function to force speed and duplex. Clears the @@ -993,7 +993,7 @@ out: } /** - * e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex + * igb_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex * @hw: pointer to the HW structure * @phy_ctrl: pointer to current value of PHY_CONTROL * @@ -1054,7 +1054,7 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, } /** - * e1000_set_d3_lplu_state - Sets low power link up state for D3 + * igb_set_d3_lplu_state - Sets low power link up state for D3 * @hw: pointer to the HW structure * @active: boolean used to enable/disable lplu * @@ -1146,7 +1146,7 @@ out: } /** - * e1000_check_downshift - Checks whether a downshift in speed occured + * igb_check_downshift - Checks whether a downshift in speed occured * @hw: pointer to the HW structure * * Success returns 0, Failure returns 1 @@ -1188,7 +1188,7 @@ out: } /** - * e1000_check_polarity_m88 - Checks the polarity. + * igb_check_polarity_m88 - Checks the polarity. * @hw: pointer to the HW structure * * Success returns 0, Failure returns -E1000_ERR_PHY (-2) @@ -1212,7 +1212,7 @@ static s32 igb_check_polarity_m88(struct e1000_hw *hw) } /** - * e1000_check_polarity_igp - Checks the polarity. + * igb_check_polarity_igp - Checks the polarity. * @hw: pointer to the HW structure * * Success returns 0, Failure returns -E1000_ERR_PHY (-2) @@ -1260,7 +1260,7 @@ out: } /** - * e1000_wait_autoneg - Wait for auto-neg compeletion + * igb_wait_autoneg - Wait for auto-neg compeletion * @hw: pointer to the HW structure * * Waits for auto-negotiation to complete or for the auto-negotiation time @@ -1292,7 +1292,7 @@ static s32 igb_wait_autoneg(struct e1000_hw *hw) } /** - * e1000_phy_has_link - Polls PHY for link + * igb_phy_has_link - Polls PHY for link * @hw: pointer to the HW structure * @iterations: number of times to poll for link * @usec_interval: delay between polling attempts @@ -1332,7 +1332,7 @@ s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations, } /** - * e1000_get_cable_length_m88 - Determine cable length for m88 PHY + * igb_get_cable_length_m88 - Determine cable length for m88 PHY * @hw: pointer to the HW structure * * Reads the PHY specific status register to retrieve the cable length @@ -1369,7 +1369,7 @@ out: } /** - * e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY + * igb_get_cable_length_igp_2 - Determine cable length for igp2 PHY * @hw: pointer to the HW structure * * The automatic gain control (agc) normalizes the amplitude of the @@ -1442,7 +1442,7 @@ out: } /** - * e1000_get_phy_info_m88 - Retrieve PHY information + * igb_get_phy_info_m88 - Retrieve PHY information * @hw: pointer to the HW structure * * Valid for only copper links. Read the PHY status register (sticky read) @@ -1523,7 +1523,7 @@ out: } /** - * e1000_get_phy_info_igp - Retrieve igp PHY information + * igb_get_phy_info_igp - Retrieve igp PHY information * @hw: pointer to the HW structure * * Read PHY status to determine if link is up. If link is up, then @@ -1590,7 +1590,7 @@ out: } /** - * e1000_phy_sw_reset - PHY software reset + * igb_phy_sw_reset - PHY software reset * @hw: pointer to the HW structure * * Does a software reset of the PHY by reading the PHY control register and @@ -1617,7 +1617,7 @@ out: } /** - * e1000_phy_hw_reset - PHY hardware reset + * igb_phy_hw_reset - PHY hardware reset * @hw: pointer to the HW structure * * Verify the reset block is not blocking us from resetting. Acquire @@ -1663,7 +1663,7 @@ out: /* Internal function pointers */ /** - * e1000_get_phy_cfg_done - Generic PHY configuration done + * igb_get_phy_cfg_done - Generic PHY configuration done * @hw: pointer to the HW structure * * Return success if silicon family did not implement a family specific @@ -1678,7 +1678,7 @@ static s32 igb_get_phy_cfg_done(struct e1000_hw *hw) } /** - * e1000_release_phy - Generic release PHY + * igb_release_phy - Generic release PHY * @hw: pointer to the HW structure * * Return if silicon family does not require a semaphore when accessing the @@ -1691,7 +1691,7 @@ static void igb_release_phy(struct e1000_hw *hw) } /** - * e1000_acquire_phy - Generic acquire PHY + * igb_acquire_phy - Generic acquire PHY * @hw: pointer to the HW structure * * Return success if silicon family does not require a semaphore when @@ -1706,7 +1706,7 @@ static s32 igb_acquire_phy(struct e1000_hw *hw) } /** - * e1000_phy_force_speed_duplex - Generic force PHY speed/duplex + * igb_phy_force_speed_duplex - Generic force PHY speed/duplex * @hw: pointer to the HW structure * * When the silicon family has not implemented a forced speed/duplex @@ -1721,7 +1721,7 @@ s32 igb_phy_force_speed_duplex(struct e1000_hw *hw) } /** - * e1000_phy_init_script_igp3 - Inits the IGP3 PHY + * igb_phy_init_script_igp3 - Inits the IGP3 PHY * @hw: pointer to the HW structure * * Initializes a Intel Gigabit PHY3 when an EEPROM is not present. -- 2.46.0