From 6cc9efed707c575a9e5880ea68f8b9d36b235f1f Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 25 Jan 2013 12:05:34 +0200 Subject: [PATCH] wlcore: move wl12xx_platform_data up and make it truly optional The platform data is used not only by wlcore-based drivers, but also by wl1251. Move it up in the directory hierarchy to reflect this. Additionally, make it truly optional. At the moment, disabling platform data while wl1251_sdio or wlcore_sdio are enabled doesn't work, but it will be necessary when device tree support is implemented. Signed-off-by: Luciano Coelho Reviewed-by: Felipe Balbi --- arch/arm/mach-omap2/board-omap3evm.c | 10 +++++----- drivers/net/wireless/ti/Kconfig | 9 +++++++++ drivers/net/wireless/ti/Makefile | 4 +++- ...12xx_platform_data.c => wilink_platform_data.c} | 0 drivers/net/wireless/ti/wlcore/Kconfig | 5 ----- drivers/net/wireless/ti/wlcore/Makefile | 3 --- include/linux/wl12xx.h | 14 +++++++++++--- 7 files changed, 28 insertions(+), 17 deletions(-) rename drivers/net/wireless/ti/{wlcore/wl12xx_platform_data.c => wilink_platform_data.c} (100%) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3985f35aee0..a4ca63ba7fa 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -309,7 +309,7 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_wp = 63, .deferred = true, }, -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA { .name = "wl1271", .mmc = 2, @@ -450,7 +450,7 @@ static struct regulator_init_data omap3evm_vio = { .consumer_supplies = omap3evm_vio_supply, }; -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA #define OMAP3EVM_WLAN_PMENA_GPIO (150) #define OMAP3EVM_WLAN_IRQ_GPIO (149) @@ -563,7 +563,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = { OMAP_PIN_OFF_NONE), OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), @@ -601,7 +601,7 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = { OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), @@ -637,7 +637,7 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = { static void __init omap3_evm_wl12xx_init(void) { -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA int ret; /* WL12xx WLAN Init */ diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig index be800119d0a..cbe1e7fef61 100644 --- a/drivers/net/wireless/ti/Kconfig +++ b/drivers/net/wireless/ti/Kconfig @@ -12,4 +12,13 @@ source "drivers/net/wireless/ti/wl18xx/Kconfig" # keep last for automatic dependencies source "drivers/net/wireless/ti/wlcore/Kconfig" + +config WILINK_PLATFORM_DATA + bool "TI WiLink platform data" + depends on WLCORE_SDIO || WL1251_SDIO + default y + ---help--- + Small platform data bit needed to pass data to the sdio modules. + + endif # WL_TI diff --git a/drivers/net/wireless/ti/Makefile b/drivers/net/wireless/ti/Makefile index 4d6823983c0..af14231aeed 100644 --- a/drivers/net/wireless/ti/Makefile +++ b/drivers/net/wireless/ti/Makefile @@ -1,5 +1,7 @@ obj-$(CONFIG_WLCORE) += wlcore/ obj-$(CONFIG_WL12XX) += wl12xx/ -obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wlcore/ obj-$(CONFIG_WL1251) += wl1251/ obj-$(CONFIG_WL18XX) += wl18xx/ + +# small builtin driver bit +obj-$(CONFIG_WILINK_PLATFORM_DATA) += wilink_platform_data.o diff --git a/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c b/drivers/net/wireless/ti/wilink_platform_data.c similarity index 100% rename from drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c rename to drivers/net/wireless/ti/wilink_platform_data.c diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig index d7b907e6717..2b832825c3d 100644 --- a/drivers/net/wireless/ti/wlcore/Kconfig +++ b/drivers/net/wireless/ti/wlcore/Kconfig @@ -33,8 +33,3 @@ config WLCORE_SDIO If you choose to build a module, it'll be called wlcore_sdio. Say N if unsure. - -config WL12XX_PLATFORM_DATA - bool - depends on WLCORE_SDIO != n || WL1251_SDIO != n - default y diff --git a/drivers/net/wireless/ti/wlcore/Makefile b/drivers/net/wireless/ti/wlcore/Makefile index d9fba9e3213..b21398f6c3e 100644 --- a/drivers/net/wireless/ti/wlcore/Makefile +++ b/drivers/net/wireless/ti/wlcore/Makefile @@ -9,7 +9,4 @@ obj-$(CONFIG_WLCORE) += wlcore.o obj-$(CONFIG_WLCORE_SPI) += wlcore_spi.o obj-$(CONFIG_WLCORE_SDIO) += wlcore_sdio.o -# small builtin driver bit -obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o - ccflags-y += -D__CHECK_ENDIAN__ diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index 360c9bce665..a54fe82e704 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -24,6 +24,8 @@ #ifndef _LINUX_WL12XX_H #define _LINUX_WL12XX_H +#include + /* Reference clock values */ enum { WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ @@ -60,10 +62,12 @@ struct wl12xx_platform_data { /* Platform does not support level trigger interrupts */ #define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0) -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA int wl12xx_set_platform_data(const struct wl12xx_platform_data *data); +struct wl12xx_platform_data *wl12xx_get_platform_data(void); + #else static inline @@ -72,8 +76,12 @@ int wl12xx_set_platform_data(const struct wl12xx_platform_data *data) return -ENOSYS; } -#endif +static inline +struct wl12xx_platform_data *wl12xx_get_platform_data(void) +{ + return ERR_PTR(-ENODATA); +} -struct wl12xx_platform_data *wl12xx_get_platform_data(void); +#endif #endif -- 2.41.0