From 6cc2ff82492d89f763e69ea6b8681926aceda610 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 24 Aug 2012 09:10:53 +0000 Subject: [PATCH] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device Add support for an MDIO bus multiplexer controlled by a simple memory-mapped device, like an FPGA. The device must be memory-mapped and contain only 8-bit registers (which keeps things simple). Tested on a Freescale P5020DS board which uses the "PIXIS" FPGA attached to the localbus. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- .../bindings/net/mdio-mux-mmioreg.txt | 75 ++++++++ drivers/net/phy/Kconfig | 13 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/mdio-mux-mmioreg.c | 170 ++++++++++++++++++ 4 files changed, 259 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt create mode 100644 drivers/net/phy/mdio-mux-mmioreg.c diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt new file mode 100644 index 00000000000..8516929c725 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt @@ -0,0 +1,75 @@ +Properties for an MDIO bus multiplexer controlled by a memory-mapped device + +This is a special case of a MDIO bus multiplexer. A memory-mapped device, +like an FPGA, is used to control which child bus is connected. The mdio-mux +node must be a child of the memory-mapped device. The driver currently only +supports devices with eight-bit registers. + +Required properties in addition to the generic multiplexer properties: + +- compatible : string, must contain "mdio-mux-mmioreg" + +- reg : integer, contains the offset of the register that controls the bus + multiplexer. The size field in the 'reg' property is the size of + register, and must therefore be 1. + +- mux-mask : integer, contains an eight-bit mask that specifies which + bits in the register control the actual bus multiplexer. The + 'reg' property of each child mdio-mux node must be constrained by + this mask. + +Example: + +The FPGA node defines a memory-mapped FPGA with a register space of 0x30 bytes. +For the "EMI2" MDIO bus, register 9 (BRDCFG1) controls the mux on that bus. +A bitmask of 0x6 means that bits 1 and 2 (bit 0 is lsb) are the bits on +BRDCFG1 that control the actual mux. + + /* The FPGA node */ + fpga: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi2 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&xmdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <9 1>; // BRDCFG1 + mux-mask = <0x6>; // EMI2 + + emi2_slot1: mdio@0 { // Slot 1 XAUI (FM2) + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phy_xgmii_slot1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + + emi2_slot2: mdio@2 { // Slot 2 XAUI (FM1) + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + phy_xgmii_slot2: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + }; + }; + }; + + /* The parent MDIO bus. */ + xmdio0: mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <100 1 0 0>; + }; diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 3090dc65a6f..983bbf4d5ef 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -159,6 +159,19 @@ config MDIO_BUS_MUX_GPIO several child MDIO busses to a parent bus. Child bus selection is under the control of GPIO lines. +config MDIO_BUS_MUX_MMIOREG + tristate "Support for MMIO device-controlled MDIO bus multiplexers" + depends on OF_MDIO + select MDIO_BUS_MUX + help + This module provides a driver for MDIO bus multiplexers that + are controlled via a simple memory-mapped device, like an FPGA. + The multiplexer connects one of several child MDIO busses to a + parent bus. Child bus selection is under the control of one of + the FPGA's registers. + + Currently, only 8-bit registers are supported. + endif # PHYLIB config MICREL_KS8995MA diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 6d2dc6c94f2..426674debae 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o obj-$(CONFIG_AMD_PHY) += amd.o obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o +obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o diff --git a/drivers/net/phy/mdio-mux-mmioreg.c b/drivers/net/phy/mdio-mux-mmioreg.c new file mode 100644 index 00000000000..098239a98b1 --- /dev/null +++ b/drivers/net/phy/mdio-mux-mmioreg.c @@ -0,0 +1,170 @@ +/* + * Simple memory-mapped device MDIO MUX driver + * + * Author: Timur Tabi + * + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +struct mdio_mux_mmioreg_state { + void *mux_handle; + phys_addr_t phys; + uint8_t mask; +}; + +/* + * MDIO multiplexing switch function + * + * This function is called by the mdio-mux layer when it thinks the mdio bus + * multiplexer needs to switch. + * + * 'current_child' is the current value of the mux register (masked via + * s->mask). + * + * 'desired_child' is the value of the 'reg' property of the target child MDIO + * node. + * + * The first time this function is called, current_child == -1. + * + * If current_child == desired_child, then the mux is already set to the + * correct bus. + */ +static int mdio_mux_mmioreg_switch_fn(int current_child, int desired_child, + void *data) +{ + struct mdio_mux_mmioreg_state *s = data; + + if (current_child ^ desired_child) { + void *p = ioremap(s->phys, 1); + uint8_t x, y; + + if (!p) + return -ENOMEM; + + x = ioread8(p); + y = (x & ~s->mask) | desired_child; + if (x != y) { + iowrite8((x & ~s->mask) | desired_child, p); + pr_debug("%s: %02x -> %02x\n", __func__, x, y); + } + + iounmap(p); + } + + return 0; +} + +static int __devinit mdio_mux_mmioreg_probe(struct platform_device *pdev) +{ + struct device_node *np2, *np = pdev->dev.of_node; + struct mdio_mux_mmioreg_state *s; + struct resource res; + const __be32 *iprop; + int len, ret; + + dev_dbg(&pdev->dev, "probing node %s\n", np->full_name); + + s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); + if (!s) + return -ENOMEM; + + ret = of_address_to_resource(np, 0, &res); + if (ret) { + dev_err(&pdev->dev, "could not obtain memory map for node %s\n", + np->full_name); + return ret; + } + s->phys = res.start; + + if (resource_size(&res) != sizeof(uint8_t)) { + dev_err(&pdev->dev, "only 8-bit registers are supported\n"); + return -EINVAL; + } + + iprop = of_get_property(np, "mux-mask", &len); + if (!iprop || len != sizeof(uint32_t)) { + dev_err(&pdev->dev, "missing or invalid mux-mask property\n"); + return -ENODEV; + } + if (be32_to_cpup(iprop) > 255) { + dev_err(&pdev->dev, "only 8-bit registers are supported\n"); + return -EINVAL; + } + s->mask = be32_to_cpup(iprop); + + /* + * Verify that the 'reg' property of each child MDIO bus does not + * set any bits outside of the 'mask'. + */ + for_each_available_child_of_node(np, np2) { + iprop = of_get_property(np2, "reg", &len); + if (!iprop || len != sizeof(uint32_t)) { + dev_err(&pdev->dev, "mdio-mux child node %s is " + "missing a 'reg' property\n", np2->full_name); + return -ENODEV; + } + if (be32_to_cpup(iprop) & ~s->mask) { + dev_err(&pdev->dev, "mdio-mux child node %s has " + "a 'reg' value with unmasked bits\n", + np2->full_name); + return -ENODEV; + } + } + + ret = mdio_mux_init(&pdev->dev, mdio_mux_mmioreg_switch_fn, + &s->mux_handle, s); + if (ret) { + dev_err(&pdev->dev, "failed to register mdio-mux bus %s\n", + np->full_name); + return ret; + } + + pdev->dev.platform_data = s; + + return 0; +} + +static int __devexit mdio_mux_mmioreg_remove(struct platform_device *pdev) +{ + struct mdio_mux_mmioreg_state *s = dev_get_platdata(&pdev->dev); + + mdio_mux_uninit(s->mux_handle); + + return 0; +} + +static struct of_device_id mdio_mux_mmioreg_match[] = { + { + .compatible = "mdio-mux-mmioreg", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mdio_mux_mmioreg_match); + +static struct platform_driver mdio_mux_mmioreg_driver = { + .driver = { + .name = "mdio-mux-mmioreg", + .owner = THIS_MODULE, + .of_match_table = mdio_mux_mmioreg_match, + }, + .probe = mdio_mux_mmioreg_probe, + .remove = __devexit_p(mdio_mux_mmioreg_remove), +}; + +module_platform_driver(mdio_mux_mmioreg_driver); + +MODULE_AUTHOR("Timur Tabi "); +MODULE_DESCRIPTION("Memory-mapped device MDIO MUX driver"); +MODULE_LICENSE("GPL v2"); -- 2.41.0