From 5e467f6ebab151b2f0166e17348e5b85ae3c87fa Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Wed, 27 Apr 2011 18:07:54 +0800 Subject: [PATCH] usbcore: warm reset USB3 port in SS.Inactive state Some USB3.0 devices go to SS.Inactive state when hot plug to USB3 ports. Warm reset the port to transition it to U0 state. This patch fixes the issue that Kingston USB3.0 flash drive can not be recognized when hot plug to USB3 port. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/core/hub.c | 46 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 93035d862c6..79a58c3a2e2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2151,6 +2151,42 @@ static int hub_port_reset(struct usb_hub *hub, int port1, return status; } +/* Warm reset a USB3 protocol port */ +static int hub_port_warm_reset(struct usb_hub *hub, int port) +{ + int ret; + u16 portstatus, portchange; + + if (!hub_is_superspeed(hub->hdev)) { + dev_err(hub->intfdev, "only USB3 hub support warm reset\n"); + return -EINVAL; + } + + /* Warm reset the port */ + ret = set_port_feature(hub->hdev, + port, USB_PORT_FEAT_BH_PORT_RESET); + if (ret) { + dev_err(hub->intfdev, "cannot warm reset port %d\n", port); + return ret; + } + + msleep(20); + ret = hub_port_status(hub, port, &portstatus, &portchange); + + if (portchange & USB_PORT_STAT_C_RESET) + clear_port_feature(hub->hdev, port, USB_PORT_FEAT_C_RESET); + + if (portchange & USB_PORT_STAT_C_BH_RESET) + clear_port_feature(hub->hdev, port, + USB_PORT_FEAT_C_BH_PORT_RESET); + + if (portchange & USB_PORT_STAT_C_LINK_STATE) + clear_port_feature(hub->hdev, port, + USB_PORT_FEAT_C_PORT_LINK_STATE); + + return ret; +} + /* Check if a port is power on */ static int port_is_power_on(struct usb_hub *hub, unsigned portstatus) { @@ -3519,6 +3555,16 @@ static void hub_events(void) USB_PORT_FEAT_C_PORT_CONFIG_ERROR); } + /* Warm reset a USB3 protocol port if it's in + * SS.Inactive state. + */ + if (hub_is_superspeed(hub->hdev) && + (portstatus & USB_PORT_STAT_LINK_STATE) + == USB_SS_PORT_LS_SS_INACTIVE) { + dev_dbg(hub_dev, "warm reset port %d\n", i); + hub_port_warm_reset(hub, i); + } + if (connect_change) hub_port_connect_change(hub, i, portstatus, portchange); -- 2.41.0