From 53d9cc7395c8dbe8d7fd6f9acd6578b236d14a0f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 8 Feb 2006 22:06:45 +0000 Subject: [PATCH] [ARM] 3279/1: OMAP: 1/3 Fix low-level io init Patch from Tony Lindgren This patch adds the missing cache flushes to common low-level init that are needed to access the IO region. These flushes are normally done at the end of devicemaps_init(), but we need to detect the OMAP core type early. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap1/io.c | 42 ++++++++++++++++++++-------------- arch/arm/plat-omap/sram.c | 9 ++++++++ include/asm-arm/arch-omap/io.h | 6 ++++- 3 files changed, 39 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index a7a19f75b9e..82d556be79c 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -13,6 +13,7 @@ #include #include +#include #include #include #include @@ -83,15 +84,24 @@ static struct map_desc omap16xx_io_desc[] __initdata = { }; #endif -static int initialized = 0; - -static void __init _omap_map_io(void) +/* + * Maps common IO regions for omap1. This should only get called from + * board specific init. + */ +void __init omap1_map_common_io(void) { - initialized = 1; - - /* We have to initialize the IO space mapping before we can run - * cpu_is_omapxxx() macros. */ iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); + + /* Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but we must also do it here because of the CPU + * revision check below. + */ + local_flush_tlb_all(); + flush_cache_all(); + + /* We want to check CPU revision early for cpu_is_omapxxxx() macros. + * IO space mapping must be initialized before we can do that. + */ omap_check_revision(); #ifdef CONFIG_ARCH_OMAP730 @@ -111,7 +121,14 @@ static void __init _omap_map_io(void) #endif omap_sram_init(); +} +/* + * Common low-level hardware init for omap1. This should only get called from + * board specific init. + */ +void __init omap1_init_common_hw() +{ /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". */ @@ -121,16 +138,7 @@ static void __init _omap_map_io(void) /* Must init clocks early to assure that timer interrupt works */ omap1_clk_init(); -} -/* - * This should only get called from board specific init - */ -void __init omap_map_common_io(void) -{ - if (!initialized) { - _omap_map_io(); - omap1_mux_init(); - } + omap1_mux_init(); } diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 792f6637583..ee82763b02b 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -17,6 +17,7 @@ #include #include +#include #include #include @@ -95,6 +96,14 @@ void __init omap_map_sram(void) omap_sram_io_desc[0].pfn, omap_sram_io_desc[0].virtual, omap_sram_io_desc[0].length); + /* + * Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but since we're called from map_io(), we + * must do it here. + */ + local_flush_tlb_all(); + flush_cache_all(); + /* * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index f5bcc9a1aed..b726acfcab1 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -116,7 +116,11 @@ typedef struct { volatile u32 offset[4096]; } __regbase32; ->offset[((vaddr)&4095)>>2] #define __REG32(paddr) __REGV32(io_p2v(paddr)) -extern void omap_map_common_io(void); +extern void omap1_map_common_io(void); +extern void omap1_init_common_hw(void); + +extern void omap2_map_common_io(void); +extern void omap2_init_common_hw(void); #else -- 2.46.0