From 51f0f7b3edac87a1b020dc6a58aaf3624a4da40b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 21 Jul 2011 02:24:18 -0300 Subject: [PATCH] [media] mt2063: Merge the two state structures into one Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/mt2063.c | 1021 ++++++++++++-------------- 1 file changed, 454 insertions(+), 567 deletions(-) diff --git a/drivers/media/common/tuners/mt2063.c b/drivers/media/common/tuners/mt2063.c index 30c72c0423b..66633fa99e8 100644 --- a/drivers/media/common/tuners/mt2063.c +++ b/drivers/media/common/tuners/mt2063.c @@ -372,20 +372,6 @@ enum MT2063_Register_Offsets { MT2063_REG_END_REGS }; -struct MT2063_Info_t { - void *handle; - void *hUserData; - u32 address; - u32 tuner_id; - struct MT2063_AvoidSpursData_t AS_Data; - u32 f_IF1_actual; - u32 rcvr_mode; - u32 ctfilt_sw; - u32 CTFiltMax[31]; - u32 num_regs; - u8 reg[MT2063_REG_END_REGS]; -}; - enum MTTune_atv_standard { MTTUNEA_UNKNOWN = 0, MTTUNEA_PAL_B, @@ -408,7 +394,6 @@ struct mt2063_state { struct dvb_tuner_ops ops; struct dvb_frontend *frontend; struct tuner_state status; - struct MT2063_Info_t *MT2063_ht; bool MT2063_init; enum MTTune_atv_standard tv_type; @@ -416,37 +401,44 @@ struct mt2063_state { u32 srate; u32 bandwidth; u32 reference; + + u32 tuner_id; + struct MT2063_AvoidSpursData_t AS_Data; + u32 f_IF1_actual; + u32 rcvr_mode; + u32 ctfilt_sw; + u32 CTFiltMax[31]; + u32 num_regs; + u8 reg[MT2063_REG_END_REGS]; }; /* Prototypes */ static void MT2063_AddExclZone(struct MT2063_AvoidSpursData_t *pAS_Info, u32 f_min, u32 f_max); -static u32 MT2063_ReInit(struct MT2063_Info_t *pInfo); -static u32 MT2063_Close(struct MT2063_Info_t *pInfo); -static u32 MT2063_GetReg(struct MT2063_Info_t *pInfo, u8 reg, u8 * val); -static u32 MT2063_GetParam(struct MT2063_Info_t *pInfo, enum MT2063_Param param, u32 * pValue); -static u32 MT2063_SetReg(struct MT2063_Info_t *pInfo, u8 reg, u8 val); -static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, enum MT2063_Param param, +static u32 MT2063_ReInit(struct mt2063_state *pInfo); +static u32 MT2063_Close(struct mt2063_state *pInfo); +static u32 MT2063_GetReg(struct mt2063_state *pInfo, u8 reg, u8 * val); +static u32 MT2063_GetParam(struct mt2063_state *pInfo, enum MT2063_Param param, u32 * pValue); +static u32 MT2063_SetReg(struct mt2063_state *pInfo, u8 reg, u8 val); +static u32 MT2063_SetParam(struct mt2063_state *pInfo, enum MT2063_Param param, enum MT2063_DNC_Output_Enable nValue); /*****************/ /* From drivers/media/common/tuners/mt2063_cfg.h */ unsigned int mt2063_setTune(struct dvb_frontend *fe, u32 f_in, - u32 bw_in, - enum MTTune_atv_standard tv_type) + u32 bw_in, + enum MTTune_atv_standard tv_type) { - //return (int)MT_Tune_atv(h, f_in, bw_in, tv_type); - struct dvb_frontend_ops *frontend_ops = NULL; struct dvb_tuner_ops *tuner_ops = NULL; struct tuner_state t_state; - struct mt2063_state *mt2063State = fe->tuner_priv; + struct mt2063_state *state = fe->tuner_priv; int err = 0; t_state.frequency = f_in; t_state.bandwidth = bw_in; - mt2063State->tv_type = tv_type; + state->tv_type = tv_type; if (&fe->ops) frontend_ops = &fe->ops; if (&frontend_ops->tuner_ops) @@ -558,7 +550,7 @@ unsigned int tuner_MT2063_ClearPowerMaskBits(struct dvb_frontend *fe) //i2c operation static int mt2063_writeregs(struct mt2063_state *state, u8 reg1, - u8 * data, int len) + u8 *data, int len) { int ret; u8 buf[60]; /* = { reg1, data }; */ @@ -648,19 +640,17 @@ static int mt2063_read_regs(struct mt2063_state *state, u8 reg1, u8 * b, u8 len) ** N/A 03-25-2004 DAD Original ** *****************************************************************************/ -static u32 MT2063_WriteSub(void *hUserData, - u32 addr, - u8 subAddress, u8 * pData, u32 cnt) +static u32 MT2063_WriteSub(struct mt2063_state *state, + u8 subAddress, u8 *pData, u32 cnt) { u32 status = 0; /* Status to be returned */ - struct dvb_frontend *fe = hUserData; - struct mt2063_state *state = fe->tuner_priv; + struct dvb_frontend *fe = state->frontend; + /* ** ToDo: Add code here to implement a serial-bus write ** operation to the MTxxxx tuner. If successful, ** return MT_OK. */ -/* return status; */ fe->ops.i2c_gate_ctrl(fe, 1); //I2C bypass drxk3926 close i2c bridge @@ -711,20 +701,18 @@ static u32 MT2063_WriteSub(void *hUserData, ** N/A 03-25-2004 DAD Original ** *****************************************************************************/ -static u32 MT2063_ReadSub(void *hUserData, - u32 addr, - u8 subAddress, u8 * pData, u32 cnt) +static u32 MT2063_ReadSub(struct mt2063_state *state, + u8 subAddress, u8 *pData, u32 cnt) { + u32 status = 0; /* Status to be returned */ + struct dvb_frontend *fe = state->frontend; + u32 i = 0; + /* ** ToDo: Add code here to implement a serial-bus read ** operation to the MTxxxx tuner. If successful, ** return MT_OK. */ -/* return status; */ - u32 status = 0; /* Status to be returned */ - struct dvb_frontend *fe = hUserData; - struct mt2063_state *state = fe->tuner_priv; - u32 i = 0; fe->ops.i2c_gate_ctrl(fe, 1); //I2C bypass drxk3926 close i2c bridge for (i = 0; i < cnt; i++) { @@ -1911,63 +1899,32 @@ static u32 MT2063_fLO_FractionalTerm(u32 f_ref, u32 num, ** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. ** ******************************************************************************/ -static u32 MT2063_Open(u32 MT2063_Addr, struct MT2063_Info_t **hMT2063, void *hUserData) +static u32 MT2063_Open(struct dvb_frontend *fe) { - u32 status = 0; /* Status to be returned. */ - struct MT2063_Info_t *pInfo = NULL; - struct dvb_frontend *fe = (struct dvb_frontend *)hUserData; + u32 status; /* Status to be returned. */ struct mt2063_state *state = fe->tuner_priv; - /* Check the argument before using */ - if (hMT2063 == NULL) { - return -ENODEV; - } - /* Default tuner handle to NULL. If successful, it will be reassigned */ - if (state->MT2063_init == false) { - pInfo = kzalloc(sizeof(struct MT2063_Info_t), GFP_KERNEL); - if (pInfo == NULL) { - return -ENOMEM; - } - pInfo->handle = NULL; - pInfo->address = MAX_UDATA; - pInfo->rcvr_mode = MT2063_CABLE_QAM; - pInfo->hUserData = NULL; - } else { - pInfo = *hMT2063; - } + if (state->MT2063_init == false) + state->rcvr_mode = MT2063_CABLE_QAM; + status = MT2063_RegisterTuner(&state->AS_Data); if (status >= 0) { - status |= MT2063_RegisterTuner(&pInfo->AS_Data); - } - - if (status >= 0) { - pInfo->handle = (void *) pInfo; - - pInfo->hUserData = hUserData; - pInfo->address = MT2063_Addr; - pInfo->rcvr_mode = MT2063_CABLE_QAM; - status |= MT2063_ReInit((void *) pInfo); + state->rcvr_mode = MT2063_CABLE_QAM; + status = MT2063_ReInit(state); } if (status < 0) /* MT2063_Close handles the un-registration of the tuner */ - MT2063_Close((void *) pInfo); + MT2063_Close(state); else { state->MT2063_init = true; - *hMT2063 = pInfo->handle; - } return (status); } -static u32 MT2063_IsValidHandle(struct MT2063_Info_t *handle) -{ - return ((handle != NULL) && (handle->handle == handle)) ? 1 : 0; -} - /****************************************************************************** ** ** Name: MT2063_Close @@ -1989,19 +1946,11 @@ static u32 MT2063_IsValidHandle(struct MT2063_Info_t *handle) ** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. ** ******************************************************************************/ -static u32 MT2063_Close(struct MT2063_Info_t *pInfo) +static u32 MT2063_Close(struct mt2063_state *state) { - if (!MT2063_IsValidHandle(pInfo)) - return -ENODEV; - /* Unregister tuner with SpurAvoidance routines (if needed) */ - MT2063_UnRegisterTuner(&pInfo->AS_Data); + MT2063_UnRegisterTuner(&state->AS_Data); /* Now remove the tuner from our own list of tuners */ - pInfo->handle = NULL; - pInfo->address = MAX_UDATA; - pInfo->hUserData = NULL; - //kfree(pInfo); - //pInfo = NULL; return 0; } @@ -2031,7 +1980,7 @@ static u32 MT2063_Close(struct MT2063_Info_t *pInfo) ** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. ** ****************************************************************************/ -static u32 MT2063_GetLocked(struct MT2063_Info_t *pInfo) +static u32 MT2063_GetLocked(struct mt2063_state *pInfo) { const u32 nMaxWait = 100; /* wait a maximum of 100 msec */ const u32 nPollRate = 2; /* poll status bits every 2 ms */ @@ -2041,16 +1990,13 @@ static u32 MT2063_GetLocked(struct MT2063_Info_t *pInfo) u32 status = 0; /* Status to be returned */ u32 nDelays = 0; - if (MT2063_IsValidHandle(pInfo) == 0) - return -ENODEV; - /* LO2 Lock bit was in a different place for B0 version */ if (pInfo->tuner_id == MT2063_B0) LO2LK = 0x40; do { status |= - MT2063_ReadSub(pInfo->hUserData, pInfo->address, + MT2063_ReadSub(pInfo, MT2063_REG_LO_STATUS, &pInfo->reg[MT2063_REG_LO_STATUS], 1); @@ -2165,7 +2111,7 @@ static u32 MT2063_GetLocked(struct MT2063_Info_t *pInfo) ** 06-24-2008 PINZ Ver 1.18: Add Get/SetParam CTFILT_SW ** ****************************************************************************/ -static u32 MT2063_GetParam(struct MT2063_Info_t *pInfo, enum MT2063_Param param, u32 *pValue) +static u32 MT2063_GetParam(struct mt2063_state *pInfo, enum MT2063_Param param, u32 *pValue) { u32 status = 0; /* Status to be returned */ u32 Div; @@ -2174,366 +2120,355 @@ static u32 MT2063_GetParam(struct MT2063_Info_t *pInfo, enum MT2063_Param param, if (pValue == NULL) return -EINVAL; - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - return -ENODEV; + switch (param) { + /* Serial Bus address of this tuner */ + case MT2063_IC_ADDR: + *pValue = pInfo->config->tuner_address; + break; + + /* Max # of MT2063's allowed to be open */ + case MT2063_MAX_OPEN: + *pValue = nMT2063MaxTuners; + break; + + /* # of MT2063's open */ + case MT2063_NUM_OPEN: + *pValue = nMT2063OpenTuners; + break; + + /* crystal frequency */ + case MT2063_SRO_FREQ: + *pValue = pInfo->AS_Data.f_ref; + break; + + /* minimum tuning step size */ + case MT2063_STEPSIZE: + *pValue = pInfo->AS_Data.f_LO2_Step; + break; + + /* input center frequency */ + case MT2063_INPUT_FREQ: + *pValue = pInfo->AS_Data.f_in; + break; + + /* LO1 Frequency */ + case MT2063_LO1_FREQ: + { + /* read the actual tuner register values for LO1C_1 and LO1C_2 */ + status |= + MT2063_ReadSub(pInfo, + MT2063_REG_LO1C_1, + &pInfo-> + reg[MT2063_REG_LO1C_1], 2); + Div = pInfo->reg[MT2063_REG_LO1C_1]; + Num = pInfo->reg[MT2063_REG_LO1C_2] & 0x3F; + pInfo->AS_Data.f_LO1 = + (pInfo->AS_Data.f_ref * Div) + + MT2063_fLO_FractionalTerm(pInfo->AS_Data. + f_ref, Num, 64); + } + *pValue = pInfo->AS_Data.f_LO1; + break; + + /* LO1 minimum step size */ + case MT2063_LO1_STEPSIZE: + *pValue = pInfo->AS_Data.f_LO1_Step; + break; + + /* LO1 FracN keep-out region */ + case MT2063_LO1_FRACN_AVOID_PARAM: + *pValue = pInfo->AS_Data.f_LO1_FracN_Avoid; + break; + + /* Current 1st IF in use */ + case MT2063_IF1_ACTUAL: + *pValue = pInfo->f_IF1_actual; + break; + + /* Requested 1st IF */ + case MT2063_IF1_REQUEST: + *pValue = pInfo->AS_Data.f_if1_Request; + break; + + /* Center of 1st IF SAW filter */ + case MT2063_IF1_CENTER: + *pValue = pInfo->AS_Data.f_if1_Center; + break; + + /* Bandwidth of 1st IF SAW filter */ + case MT2063_IF1_BW: + *pValue = pInfo->AS_Data.f_if1_bw; + break; + + /* zero-IF bandwidth */ + case MT2063_ZIF_BW: + *pValue = pInfo->AS_Data.f_zif_bw; + break; + + /* LO2 Frequency */ + case MT2063_LO2_FREQ: + { + /* Read the actual tuner register values for LO2C_1, LO2C_2 and LO2C_3 */ + status |= + MT2063_ReadSub(pInfo, + MT2063_REG_LO2C_1, + &pInfo-> + reg[MT2063_REG_LO2C_1], 3); + Div = + (pInfo->reg[MT2063_REG_LO2C_1] & 0xFE) >> 1; + Num = + ((pInfo-> + reg[MT2063_REG_LO2C_1] & 0x01) << 12) | + (pInfo-> + reg[MT2063_REG_LO2C_2] << 4) | (pInfo-> + reg + [MT2063_REG_LO2C_3] + & 0x00F); + pInfo->AS_Data.f_LO2 = + (pInfo->AS_Data.f_ref * Div) + + MT2063_fLO_FractionalTerm(pInfo->AS_Data. + f_ref, Num, 8191); + } + *pValue = pInfo->AS_Data.f_LO2; + break; + + /* LO2 minimum step size */ + case MT2063_LO2_STEPSIZE: + *pValue = pInfo->AS_Data.f_LO2_Step; + break; + + /* LO2 FracN keep-out region */ + case MT2063_LO2_FRACN_AVOID: + *pValue = pInfo->AS_Data.f_LO2_FracN_Avoid; + break; + + /* output center frequency */ + case MT2063_OUTPUT_FREQ: + *pValue = pInfo->AS_Data.f_out; + break; + + /* output bandwidth */ + case MT2063_OUTPUT_BW: + *pValue = pInfo->AS_Data.f_out_bw - 750000; + break; + + /* min inter-tuner LO separation */ + case MT2063_LO_SEPARATION: + *pValue = pInfo->AS_Data.f_min_LO_Separation; + break; + + /* ID of avoid-spurs algorithm in use */ + case MT2063_AS_ALG: + *pValue = pInfo->AS_Data.nAS_Algorithm; + break; + + /* max # of intra-tuner harmonics */ + case MT2063_MAX_HARM1: + *pValue = pInfo->AS_Data.maxH1; + break; + + /* max # of inter-tuner harmonics */ + case MT2063_MAX_HARM2: + *pValue = pInfo->AS_Data.maxH2; + break; + + /* # of 1st IF exclusion zones */ + case MT2063_EXCL_ZONES: + *pValue = pInfo->AS_Data.nZones; + break; + + /* # of spurs found/avoided */ + case MT2063_NUM_SPURS: + *pValue = pInfo->AS_Data.nSpursFound; + break; + + /* >0 spurs avoided */ + case MT2063_SPUR_AVOIDED: + *pValue = pInfo->AS_Data.bSpurAvoided; + break; + + /* >0 spurs in output (mathematically) */ + case MT2063_SPUR_PRESENT: + *pValue = pInfo->AS_Data.bSpurPresent; + break; + + /* Predefined receiver setup combination */ + case MT2063_RCVR_MODE: + *pValue = pInfo->rcvr_mode; + break; + + case MT2063_PD1: + case MT2063_PD2: { + u8 mask = (param == MT2063_PD1 ? 0x01 : 0x03); /* PD1 vs PD2 */ + u8 orig = (pInfo->reg[MT2063_REG_BYP_CTRL]); + u8 reg = (orig & 0xF1) | mask; /* Only set 3 bits (not 5) */ + int i; + + *pValue = 0; + + /* Initiate ADC output to reg 0x0A */ + if (reg != orig) + status |= + MT2063_WriteSub(pInfo, + MT2063_REG_BYP_CTRL, + ®, 1); + + if (status < 0) + return (status); + + for (i = 0; i < 8; i++) { + status |= + MT2063_ReadSub(pInfo, + MT2063_REG_ADC_OUT, + &pInfo-> + reg + [MT2063_REG_ADC_OUT], + 1); + + if (status >= 0) + *pValue += + pInfo-> + reg[MT2063_REG_ADC_OUT]; + else { + if (i) + *pValue /= i; + return (status); + } + } + *pValue /= 8; /* divide by number of reads */ + *pValue >>= 2; /* only want 6 MSB's out of 8 */ + + /* Restore value of Register BYP_CTRL */ + if (reg != orig) + status |= + MT2063_WriteSub(pInfo, + MT2063_REG_BYP_CTRL, + &orig, 1); + } + break; + + /* Get LNA attenuator code */ + case MT2063_ACLNA: + { + u8 val; + status |= + MT2063_GetReg(pInfo, MT2063_REG_XO_STATUS, + &val); + *pValue = val & 0x1f; + } + break; + + /* Get RF attenuator code */ + case MT2063_ACRF: + { + u8 val; + status |= + MT2063_GetReg(pInfo, MT2063_REG_RF_STATUS, + &val); + *pValue = val & 0x1f; + } + break; - switch (param) { - /* Serial Bus address of this tuner */ - case MT2063_IC_ADDR: - *pValue = pInfo->address; - break; - - /* Max # of MT2063's allowed to be open */ - case MT2063_MAX_OPEN: - *pValue = nMT2063MaxTuners; - break; - - /* # of MT2063's open */ - case MT2063_NUM_OPEN: - *pValue = nMT2063OpenTuners; - break; - - /* crystal frequency */ - case MT2063_SRO_FREQ: - *pValue = pInfo->AS_Data.f_ref; - break; - - /* minimum tuning step size */ - case MT2063_STEPSIZE: - *pValue = pInfo->AS_Data.f_LO2_Step; - break; - - /* input center frequency */ - case MT2063_INPUT_FREQ: - *pValue = pInfo->AS_Data.f_in; - break; - - /* LO1 Frequency */ - case MT2063_LO1_FREQ: - { - /* read the actual tuner register values for LO1C_1 and LO1C_2 */ - status |= - MT2063_ReadSub(pInfo->hUserData, - pInfo->address, - MT2063_REG_LO1C_1, - &pInfo-> - reg[MT2063_REG_LO1C_1], 2); - Div = pInfo->reg[MT2063_REG_LO1C_1]; - Num = pInfo->reg[MT2063_REG_LO1C_2] & 0x3F; - pInfo->AS_Data.f_LO1 = - (pInfo->AS_Data.f_ref * Div) + - MT2063_fLO_FractionalTerm(pInfo->AS_Data. - f_ref, Num, 64); - } - *pValue = pInfo->AS_Data.f_LO1; - break; - - /* LO1 minimum step size */ - case MT2063_LO1_STEPSIZE: - *pValue = pInfo->AS_Data.f_LO1_Step; - break; - - /* LO1 FracN keep-out region */ - case MT2063_LO1_FRACN_AVOID_PARAM: - *pValue = pInfo->AS_Data.f_LO1_FracN_Avoid; - break; - - /* Current 1st IF in use */ - case MT2063_IF1_ACTUAL: - *pValue = pInfo->f_IF1_actual; - break; - - /* Requested 1st IF */ - case MT2063_IF1_REQUEST: - *pValue = pInfo->AS_Data.f_if1_Request; - break; - - /* Center of 1st IF SAW filter */ - case MT2063_IF1_CENTER: - *pValue = pInfo->AS_Data.f_if1_Center; - break; - - /* Bandwidth of 1st IF SAW filter */ - case MT2063_IF1_BW: - *pValue = pInfo->AS_Data.f_if1_bw; - break; - - /* zero-IF bandwidth */ - case MT2063_ZIF_BW: - *pValue = pInfo->AS_Data.f_zif_bw; - break; - - /* LO2 Frequency */ - case MT2063_LO2_FREQ: - { - /* Read the actual tuner register values for LO2C_1, LO2C_2 and LO2C_3 */ - status |= - MT2063_ReadSub(pInfo->hUserData, - pInfo->address, - MT2063_REG_LO2C_1, - &pInfo-> - reg[MT2063_REG_LO2C_1], 3); - Div = - (pInfo->reg[MT2063_REG_LO2C_1] & 0xFE) >> 1; - Num = - ((pInfo-> - reg[MT2063_REG_LO2C_1] & 0x01) << 12) | - (pInfo-> - reg[MT2063_REG_LO2C_2] << 4) | (pInfo-> - reg - [MT2063_REG_LO2C_3] - & 0x00F); - pInfo->AS_Data.f_LO2 = - (pInfo->AS_Data.f_ref * Div) + - MT2063_fLO_FractionalTerm(pInfo->AS_Data. - f_ref, Num, 8191); - } - *pValue = pInfo->AS_Data.f_LO2; - break; - - /* LO2 minimum step size */ - case MT2063_LO2_STEPSIZE: - *pValue = pInfo->AS_Data.f_LO2_Step; - break; - - /* LO2 FracN keep-out region */ - case MT2063_LO2_FRACN_AVOID: - *pValue = pInfo->AS_Data.f_LO2_FracN_Avoid; - break; - - /* output center frequency */ - case MT2063_OUTPUT_FREQ: - *pValue = pInfo->AS_Data.f_out; - break; - - /* output bandwidth */ - case MT2063_OUTPUT_BW: - *pValue = pInfo->AS_Data.f_out_bw - 750000; - break; - - /* min inter-tuner LO separation */ - case MT2063_LO_SEPARATION: - *pValue = pInfo->AS_Data.f_min_LO_Separation; - break; - - /* ID of avoid-spurs algorithm in use */ - case MT2063_AS_ALG: - *pValue = pInfo->AS_Data.nAS_Algorithm; - break; - - /* max # of intra-tuner harmonics */ - case MT2063_MAX_HARM1: - *pValue = pInfo->AS_Data.maxH1; - break; - - /* max # of inter-tuner harmonics */ - case MT2063_MAX_HARM2: - *pValue = pInfo->AS_Data.maxH2; - break; - - /* # of 1st IF exclusion zones */ - case MT2063_EXCL_ZONES: - *pValue = pInfo->AS_Data.nZones; - break; - - /* # of spurs found/avoided */ - case MT2063_NUM_SPURS: - *pValue = pInfo->AS_Data.nSpursFound; - break; - - /* >0 spurs avoided */ - case MT2063_SPUR_AVOIDED: - *pValue = pInfo->AS_Data.bSpurAvoided; - break; - - /* >0 spurs in output (mathematically) */ - case MT2063_SPUR_PRESENT: - *pValue = pInfo->AS_Data.bSpurPresent; - break; - - /* Predefined receiver setup combination */ - case MT2063_RCVR_MODE: - *pValue = pInfo->rcvr_mode; - break; - - case MT2063_PD1: - case MT2063_PD2: - { - u8 mask = (param == MT2063_PD1 ? 0x01 : 0x03); /* PD1 vs PD2 */ - u8 orig = (pInfo->reg[MT2063_REG_BYP_CTRL]); - u8 reg = (orig & 0xF1) | mask; /* Only set 3 bits (not 5) */ - int i; - - *pValue = 0; - - /* Initiate ADC output to reg 0x0A */ - if (reg != orig) - status |= - MT2063_WriteSub(pInfo->hUserData, - pInfo->address, - MT2063_REG_BYP_CTRL, - ®, 1); - - if (status < 0) - return (status); - - for (i = 0; i < 8; i++) { - status |= - MT2063_ReadSub(pInfo->hUserData, - pInfo->address, - MT2063_REG_ADC_OUT, - &pInfo-> - reg - [MT2063_REG_ADC_OUT], - 1); - - if (status >= 0) - *pValue += - pInfo-> - reg[MT2063_REG_ADC_OUT]; - else { - if (i) - *pValue /= i; - return (status); - } - } - *pValue /= 8; /* divide by number of reads */ - *pValue >>= 2; /* only want 6 MSB's out of 8 */ - - /* Restore value of Register BYP_CTRL */ - if (reg != orig) - status |= - MT2063_WriteSub(pInfo->hUserData, - pInfo->address, - MT2063_REG_BYP_CTRL, - &orig, 1); - } - break; - - /* Get LNA attenuator code */ - case MT2063_ACLNA: - { - u8 val; - status |= - MT2063_GetReg(pInfo, MT2063_REG_XO_STATUS, - &val); - *pValue = val & 0x1f; - } - break; - - /* Get RF attenuator code */ - case MT2063_ACRF: - { - u8 val; - status |= - MT2063_GetReg(pInfo, MT2063_REG_RF_STATUS, - &val); - *pValue = val & 0x1f; - } - break; - - /* Get FIF attenuator code */ - case MT2063_ACFIF: - { - u8 val; - status |= - MT2063_GetReg(pInfo, MT2063_REG_FIF_STATUS, - &val); - *pValue = val & 0x1f; - } - break; - - /* Get LNA attenuator limit */ - case MT2063_ACLNA_MAX: - { - u8 val; - status |= - MT2063_GetReg(pInfo, MT2063_REG_LNA_OV, - &val); - *pValue = val & 0x1f; - } - break; - - /* Get RF attenuator limit */ - case MT2063_ACRF_MAX: - { - u8 val; - status |= - MT2063_GetReg(pInfo, MT2063_REG_RF_OV, - &val); - *pValue = val & 0x1f; - } - break; - - /* Get FIF attenuator limit */ - case MT2063_ACFIF_MAX: - { - u8 val; - status |= - MT2063_GetReg(pInfo, MT2063_REG_FIF_OV, - &val); - *pValue = val & 0x1f; - } - break; - - /* Get current used DNC output */ - case MT2063_DNC_OUTPUT_ENABLE: - { - if ((pInfo->reg[MT2063_REG_DNC_GAIN] & 0x03) == 0x03) { /* if DNC1 is off */ - if ((pInfo->reg[MT2063_REG_VGA_GAIN] & 0x03) == 0x03) /* if DNC2 is off */ - *pValue = - (u32) MT2063_DNC_NONE; - else - *pValue = - (u32) MT2063_DNC_2; - } else { /* DNC1 is on */ - - if ((pInfo->reg[MT2063_REG_VGA_GAIN] & 0x03) == 0x03) /* if DNC2 is off */ - *pValue = - (u32) MT2063_DNC_1; - else - *pValue = - (u32) MT2063_DNC_BOTH; - } - } - break; - - /* Get VGA Gain Code */ - case MT2063_VGAGC: - *pValue = - ((pInfo->reg[MT2063_REG_VGA_GAIN] & 0x0C) >> 2); - break; - - /* Get VGA bias current */ - case MT2063_VGAOI: - *pValue = (pInfo->reg[MT2063_REG_RSVD_31] & 0x07); - break; - - /* Get TAGC setting */ - case MT2063_TAGC: - *pValue = (pInfo->reg[MT2063_REG_RSVD_1E] & 0x03); - break; - - /* Get AMP Gain Code */ - case MT2063_AMPGC: - *pValue = (pInfo->reg[MT2063_REG_TEMP_SEL] & 0x03); - break; - - /* Avoid DECT Frequencies */ - case MT2063_AVOID_DECT: - *pValue = pInfo->AS_Data.avoidDECT; - break; - - /* Cleartune filter selection: 0 - by IC (default), 1 - by software */ - case MT2063_CTFILT_SW: - *pValue = pInfo->ctfilt_sw; - break; - - case MT2063_EOP: - default: - status |= -ERANGE; - } + /* Get FIF attenuator code */ + case MT2063_ACFIF: + { + u8 val; + status |= + MT2063_GetReg(pInfo, MT2063_REG_FIF_STATUS, + &val); + *pValue = val & 0x1f; + } + break; + + /* Get LNA attenuator limit */ + case MT2063_ACLNA_MAX: + { + u8 val; + status |= + MT2063_GetReg(pInfo, MT2063_REG_LNA_OV, + &val); + *pValue = val & 0x1f; + } + break; + + /* Get RF attenuator limit */ + case MT2063_ACRF_MAX: + { + u8 val; + status |= + MT2063_GetReg(pInfo, MT2063_REG_RF_OV, + &val); + *pValue = val & 0x1f; + } + break; + + /* Get FIF attenuator limit */ + case MT2063_ACFIF_MAX: + { + u8 val; + status |= + MT2063_GetReg(pInfo, MT2063_REG_FIF_OV, + &val); + *pValue = val & 0x1f; + } + break; + + /* Get current used DNC output */ + case MT2063_DNC_OUTPUT_ENABLE: + { + if ((pInfo->reg[MT2063_REG_DNC_GAIN] & 0x03) == 0x03) { /* if DNC1 is off */ + if ((pInfo->reg[MT2063_REG_VGA_GAIN] & 0x03) == 0x03) /* if DNC2 is off */ + *pValue = + (u32) MT2063_DNC_NONE; + else + *pValue = + (u32) MT2063_DNC_2; + } else { /* DNC1 is on */ + + if ((pInfo->reg[MT2063_REG_VGA_GAIN] & 0x03) == 0x03) /* if DNC2 is off */ + *pValue = + (u32) MT2063_DNC_1; + else + *pValue = + (u32) MT2063_DNC_BOTH; + } + } + break; + + /* Get VGA Gain Code */ + case MT2063_VGAGC: + *pValue = ((pInfo->reg[MT2063_REG_VGA_GAIN] & 0x0C) >> 2); + break; + + /* Get VGA bias current */ + case MT2063_VGAOI: + *pValue = (pInfo->reg[MT2063_REG_RSVD_31] & 0x07); + break; + + /* Get TAGC setting */ + case MT2063_TAGC: + *pValue = (pInfo->reg[MT2063_REG_RSVD_1E] & 0x03); + break; + + /* Get AMP Gain Code */ + case MT2063_AMPGC: + *pValue = (pInfo->reg[MT2063_REG_TEMP_SEL] & 0x03); + break; + + /* Avoid DECT Frequencies */ + case MT2063_AVOID_DECT: + *pValue = pInfo->AS_Data.avoidDECT; + break; + + /* Cleartune filter selection: 0 - by IC (default), 1 - by software */ + case MT2063_CTFILT_SW: + *pValue = pInfo->ctfilt_sw; + break; + + case MT2063_EOP: + default: + status |= -ERANGE; + } return (status); } @@ -2566,22 +2501,17 @@ static u32 MT2063_GetParam(struct MT2063_Info_t *pInfo, enum MT2063_Param param, ** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. ** ****************************************************************************/ -static u32 MT2063_GetReg(struct MT2063_Info_t *pInfo, u8 reg, u8 * val) +static u32 MT2063_GetReg(struct mt2063_state *pInfo, u8 reg, u8 * val) { u32 status = 0; /* Status to be returned */ - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - return -ENODEV; - if (val == NULL) return -EINVAL; if (reg >= MT2063_REG_END_REGS) return -ERANGE; - status = MT2063_ReadSub(pInfo->hUserData, pInfo->address, reg, - &pInfo->reg[reg], 1); + status = MT2063_ReadSub(pInfo, reg, &pInfo->reg[reg], 1); return (status); } @@ -2623,7 +2553,7 @@ static u32 MT2063_GetReg(struct MT2063_Info_t *pInfo, u8 reg, u8 * val) ** PD2 Target | 40 | 33 | 42 | 42 | 33 | 42 ** ** -** Parameters: pInfo - ptr to MT2063_Info_t structure +** Parameters: pInfo - ptr to mt2063_state structure ** Mode - desired reciever mode ** ** Usage: status = MT2063_SetReceiverMode(hMT2063, Mode); @@ -2669,7 +2599,7 @@ static u32 MT2063_GetReg(struct MT2063_Info_t *pInfo, u8 reg, u8 * val) ** removed GCUAUTO / BYPATNDN/UP ** ******************************************************************************/ -static u32 MT2063_SetReceiverMode(struct MT2063_Info_t *pInfo, +static u32 MT2063_SetReceiverMode(struct mt2063_state *pInfo, enum MT2063_RCVR_MODES Mode) { u32 status = 0; /* Status to be returned */ @@ -2818,7 +2748,7 @@ static u32 MT2063_SetReceiverMode(struct MT2063_Info_t *pInfo, ** 06-24-2008 PINZ Ver 1.18: Add Get/SetParam CTFILT_SW ** ******************************************************************************/ -static u32 MT2063_ReInit(struct MT2063_Info_t *pInfo) +static u32 MT2063_ReInit(struct mt2063_state *pInfo) { u8 all_resets = 0xF0; /* reset/load bits */ u32 status = 0; /* Status to be returned */ @@ -2885,13 +2815,8 @@ static u32 MT2063_ReInit(struct MT2063_Info_t *pInfo) 0x00 }; - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - return -ENODEV; - /* Read the Part/Rev code from the tuner */ - status = MT2063_ReadSub(pInfo->hUserData, pInfo->address, - MT2063_REG_PART_REV, pInfo->reg, 1); + status = MT2063_ReadSub(pInfo, MT2063_REG_PART_REV, pInfo->reg, 1); if (status < 0) return status; @@ -2902,7 +2827,7 @@ static u32 MT2063_ReInit(struct MT2063_Info_t *pInfo) return -ENODEV; /* Wrong tuner Part/Rev code */ /* Check the 2nd byte of the Part/Rev code from the tuner */ - status = MT2063_ReadSub(pInfo->hUserData, pInfo->address, + status = MT2063_ReadSub(pInfo, MT2063_REG_RSVD_3B, &pInfo->reg[MT2063_REG_RSVD_3B], 1); @@ -2911,9 +2836,7 @@ static u32 MT2063_ReInit(struct MT2063_Info_t *pInfo) return -ENODEV; /* Wrong tuner Part/Rev code */ /* Reset the tuner */ - status = MT2063_WriteSub(pInfo->hUserData, - pInfo->address, - MT2063_REG_LO2CQ_3, &all_resets, 1); + status = MT2063_WriteSub(pInfo, MT2063_REG_LO2CQ_3, &all_resets, 1); if (status < 0) return status; @@ -2940,8 +2863,7 @@ static u32 MT2063_ReInit(struct MT2063_Info_t *pInfo) while (status >= 0 && *def) { u8 reg = *def++; u8 val = *def++; - status = MT2063_WriteSub(pInfo->hUserData, pInfo->address, reg, - &val, 1); + status = MT2063_WriteSub(pInfo, reg, &val, 1); } if (status < 0) return status; @@ -2951,8 +2873,7 @@ static u32 MT2063_ReInit(struct MT2063_Info_t *pInfo) maxReads = 10; while (status >= 0 && (FCRUN != 0) && (maxReads-- > 0)) { msleep(2); - status = MT2063_ReadSub(pInfo->hUserData, - pInfo->address, + status = MT2063_ReadSub(pInfo, MT2063_REG_XO_STATUS, &pInfo-> reg[MT2063_REG_XO_STATUS], 1); @@ -2962,15 +2883,14 @@ static u32 MT2063_ReInit(struct MT2063_Info_t *pInfo) if (FCRUN != 0) return -ENODEV; - status = MT2063_ReadSub(pInfo->hUserData, pInfo->address, + status = MT2063_ReadSub(pInfo, MT2063_REG_FIFFC, &pInfo->reg[MT2063_REG_FIFFC], 1); if (status < 0) return status; /* Read back all the registers from the tuner */ - status = MT2063_ReadSub(pInfo->hUserData, - pInfo->address, + status = MT2063_ReadSub(pInfo, MT2063_REG_PART_REV, pInfo->reg, MT2063_REG_END_REGS); if (status < 0) @@ -3039,13 +2959,13 @@ static u32 MT2063_ReInit(struct MT2063_Info_t *pInfo) */ pInfo->reg[MT2063_REG_CTUNE_CTRL] = 0x0A; - status = MT2063_WriteSub(pInfo->hUserData, pInfo->address, + status = MT2063_WriteSub(pInfo, MT2063_REG_CTUNE_CTRL, &pInfo->reg[MT2063_REG_CTUNE_CTRL], 1); if (status < 0) return status; /* Read the ClearTune filter calibration value */ - status = MT2063_ReadSub(pInfo->hUserData, pInfo->address, + status = MT2063_ReadSub(pInfo, MT2063_REG_FIFFC, &pInfo->reg[MT2063_REG_FIFFC], 1); if (status < 0) @@ -3054,7 +2974,7 @@ static u32 MT2063_ReInit(struct MT2063_Info_t *pInfo) fcu_osc = pInfo->reg[MT2063_REG_FIFFC]; pInfo->reg[MT2063_REG_CTUNE_CTRL] = 0x00; - status = MT2063_WriteSub(pInfo->hUserData, pInfo->address, + status = MT2063_WriteSub(pInfo, MT2063_REG_CTUNE_CTRL, &pInfo->reg[MT2063_REG_CTUNE_CTRL], 1); if (status < 0) @@ -3150,17 +3070,13 @@ static u32 MT2063_ReInit(struct MT2063_Info_t *pInfo) ** 06-24-2008 PINZ Ver 1.18: Add Get/SetParam CTFILT_SW ** ****************************************************************************/ -static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, +static u32 MT2063_SetParam(struct mt2063_state *pInfo, enum MT2063_Param param, enum MT2063_DNC_Output_Enable nValue) { u32 status = 0; /* Status to be returned */ u8 val = 0; - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - return -ENODEV; - switch (param) { /* crystal frequency */ case MT2063_SRO_FREQ: @@ -3191,13 +3107,11 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, /* Buffer the queue for restoration later and get actual LO2 values. */ status |= - MT2063_ReadSub(pInfo->hUserData, - pInfo->address, + MT2063_ReadSub(pInfo, MT2063_REG_LO2CQ_1, &(tempLO2CQ[0]), 3); status |= - MT2063_ReadSub(pInfo->hUserData, - pInfo->address, + MT2063_ReadSub(pInfo, MT2063_REG_LO2C_1, &(tempLO2C[0]), 3); @@ -3211,8 +3125,7 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, (tempLO2CQ[2] != tempLO2C[2])) { /* put actual LO2 value into queue (with 0 in one-shot bits) */ status |= - MT2063_WriteSub(pInfo->hUserData, - pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_LO2CQ_1, &(tempLO2C[0]), 3); @@ -3239,8 +3152,7 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, pInfo->reg[MT2063_REG_LO1CQ_2] = (u8) (FracN); status |= - MT2063_WriteSub(pInfo->hUserData, - pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_LO1CQ_1, &pInfo-> reg[MT2063_REG_LO1CQ_1], 2); @@ -3248,8 +3160,7 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, /* set the one-shot bit to load the pair of LO values */ tmpOneShot = tempLO2CQ[2] | 0xE0; status |= - MT2063_WriteSub(pInfo->hUserData, - pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_LO2CQ_3, &tmpOneShot, 1); @@ -3257,8 +3168,7 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, if (restore) { /* put actual LO2 value into queue (0 in one-shot bits) */ status |= - MT2063_WriteSub(pInfo->hUserData, - pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_LO2CQ_1, &(tempLO2CQ[0]), 3); @@ -3271,7 +3181,7 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, tempLO2CQ[2]; } - MT2063_GetParam(pInfo->hUserData, + MT2063_GetParam(pInfo, MT2063_LO1_FREQ, &pInfo->AS_Data.f_LO1); } @@ -3311,13 +3221,11 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, /* Buffer the queue for restoration later and get actual LO2 values. */ status |= - MT2063_ReadSub(pInfo->hUserData, - pInfo->address, + MT2063_ReadSub(pInfo, MT2063_REG_LO1CQ_1, &(tempLO1CQ[0]), 2); status |= - MT2063_ReadSub(pInfo->hUserData, - pInfo->address, + MT2063_ReadSub(pInfo, MT2063_REG_LO1C_1, &(tempLO1C[0]), 2); @@ -3326,8 +3234,7 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, || (tempLO1CQ[1] != tempLO1C[1])) { /* put actual LO1 value into queue */ status |= - MT2063_WriteSub(pInfo->hUserData, - pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_LO1CQ_1, &(tempLO1C[0]), 2); @@ -3353,8 +3260,7 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, pInfo->reg[MT2063_REG_LO2CQ_3] = (u8) ((FracN2 & 0x0F)); status |= - MT2063_WriteSub(pInfo->hUserData, - pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_LO1CQ_1, &pInfo-> reg[MT2063_REG_LO1CQ_1], 3); @@ -3363,8 +3269,7 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, tmpOneShot = pInfo->reg[MT2063_REG_LO2CQ_3] | 0xE0; status |= - MT2063_WriteSub(pInfo->hUserData, - pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_LO2CQ_3, &tmpOneShot, 1); @@ -3372,8 +3277,7 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, if (restore) { /* put previous LO1 queue value back into queue */ status |= - MT2063_WriteSub(pInfo->hUserData, - pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_LO1CQ_1, &(tempLO1CQ[0]), 2); @@ -3384,7 +3288,7 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, tempLO1CQ[1]; } - MT2063_GetParam(pInfo->hUserData, + MT2063_GetParam(pInfo, MT2063_LO2_FREQ, &pInfo->AS_Data.f_LO2); } @@ -3769,25 +3673,22 @@ static u32 MT2063_SetParam(struct MT2063_Info_t *pInfo, ** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. ** ****************************************************************************/ -static u32 MT2063_ClearPowerMaskBits(struct MT2063_Info_t *pInfo, enum MT2063_Mask_Bits Bits) +static u32 MT2063_ClearPowerMaskBits(struct mt2063_state *pInfo, enum MT2063_Mask_Bits Bits) { u32 status = 0; /* Status to be returned */ - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - return -ENODEV; Bits = (enum MT2063_Mask_Bits)(Bits & MT2063_ALL_SD); /* Only valid bits for this tuner */ if ((Bits & 0xFF00) != 0) { pInfo->reg[MT2063_REG_PWR_2] &= ~(u8) (Bits >> 8); status |= - MT2063_WriteSub(pInfo->hUserData, pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_PWR_2, &pInfo->reg[MT2063_REG_PWR_2], 1); } if ((Bits & 0xFF) != 0) { pInfo->reg[MT2063_REG_PWR_1] &= ~(u8) (Bits & 0xFF); status |= - MT2063_WriteSub(pInfo->hUserData, pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_PWR_1, &pInfo->reg[MT2063_REG_PWR_1], 1); } @@ -3823,20 +3724,17 @@ static u32 MT2063_ClearPowerMaskBits(struct MT2063_Info_t *pInfo, enum MT2063_Ma ** correct wakeup of the LNA ** ****************************************************************************/ -static u32 MT2063_SoftwareShutdown(struct MT2063_Info_t *pInfo, u8 Shutdown) +static u32 MT2063_SoftwareShutdown(struct mt2063_state *pInfo, u8 Shutdown) { u32 status = 0; /* Status to be returned */ - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - return -ENODEV; if (Shutdown == 1) pInfo->reg[MT2063_REG_PWR_1] |= 0x04; /* Turn the bit on */ else pInfo->reg[MT2063_REG_PWR_1] &= ~0x04; /* Turn off the bit */ status |= - MT2063_WriteSub(pInfo->hUserData, pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_PWR_1, &pInfo->reg[MT2063_REG_PWR_1], 1); @@ -3844,14 +3742,14 @@ static u32 MT2063_SoftwareShutdown(struct MT2063_Info_t *pInfo, u8 Shutdown) pInfo->reg[MT2063_REG_BYP_CTRL] = (pInfo->reg[MT2063_REG_BYP_CTRL] & 0x9F) | 0x40; status |= - MT2063_WriteSub(pInfo->hUserData, pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_BYP_CTRL, &pInfo->reg[MT2063_REG_BYP_CTRL], 1); pInfo->reg[MT2063_REG_BYP_CTRL] = (pInfo->reg[MT2063_REG_BYP_CTRL] & 0x9F); status |= - MT2063_WriteSub(pInfo->hUserData, pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_BYP_CTRL, &pInfo->reg[MT2063_REG_BYP_CTRL], 1); @@ -3888,18 +3786,14 @@ static u32 MT2063_SoftwareShutdown(struct MT2063_Info_t *pInfo, u8 Shutdown) ** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. ** ****************************************************************************/ -static u32 MT2063_SetReg(struct MT2063_Info_t *pInfo, u8 reg, u8 val) +static u32 MT2063_SetReg(struct mt2063_state *pInfo, u8 reg, u8 val) { u32 status = 0; /* Status to be returned */ - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - return -ENODEV; - if (reg >= MT2063_REG_END_REGS) status |= -ERANGE; - status = MT2063_WriteSub(pInfo->hUserData, pInfo->address, reg, &val, + status = MT2063_WriteSub(pInfo, reg, &val, 1); if (status >= 0) pInfo->reg[reg] = val; @@ -4063,7 +3957,7 @@ static u32 MT2063_CalcLO2Mult(u32 * Div, ** cross-over frequency values. ** ****************************************************************************/ -static u32 FindClearTuneFilter(struct MT2063_Info_t *pInfo, u32 f_in) +static u32 FindClearTuneFilter(struct mt2063_state *pInfo, u32 f_in) { u32 RFBand; u32 idx; /* index loop */ @@ -4122,7 +4016,7 @@ static u32 FindClearTuneFilter(struct MT2063_Info_t *pInfo, u32 f_in) ** 06-24-2008 PINZ Ver 1.18: Add Get/SetParam CTFILT_SW ** ****************************************************************************/ -static u32 MT2063_Tune(struct MT2063_Info_t *pInfo, u32 f_in) +static u32 MT2063_Tune(struct mt2063_state *pInfo, u32 f_in) { /* RF input center frequency */ u32 status = 0; /* status of operation */ @@ -4140,10 +4034,6 @@ static u32 MT2063_Tune(struct MT2063_Info_t *pInfo, u32 f_in) u8 val; u32 RFBand; - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - return -ENODEV; - /* Check the input and output frequency ranges */ if ((f_in < MT2063_MIN_FIN_FREQ) || (f_in > MT2063_MAX_FIN_FREQ)) return -EINVAL; @@ -4185,7 +4075,7 @@ static u32 MT2063_Tune(struct MT2063_Info_t *pInfo, u32 f_in) */ if (status >= 0) { status |= - MT2063_ReadSub(pInfo->hUserData, pInfo->address, + MT2063_ReadSub(pInfo, MT2063_REG_FIFFC, &pInfo->reg[MT2063_REG_FIFFC], 1); fiffc = pInfo->reg[MT2063_REG_FIFFC]; @@ -4288,10 +4178,10 @@ static u32 MT2063_Tune(struct MT2063_Info_t *pInfo, u32 f_in) ** IMPORTANT: There is a required order for writing ** (0x05 must follow all the others). */ - status |= MT2063_WriteSub(pInfo->hUserData, pInfo->address, MT2063_REG_LO1CQ_1, &pInfo->reg[MT2063_REG_LO1CQ_1], 5); /* 0x01 - 0x05 */ + status |= MT2063_WriteSub(pInfo, MT2063_REG_LO1CQ_1, &pInfo->reg[MT2063_REG_LO1CQ_1], 5); /* 0x01 - 0x05 */ if (pInfo->tuner_id == MT2063_B0) { /* Re-write the one-shot bits to trigger the tune operation */ - status |= MT2063_WriteSub(pInfo->hUserData, pInfo->address, MT2063_REG_LO2CQ_3, &pInfo->reg[MT2063_REG_LO2CQ_3], 1); /* 0x05 */ + status |= MT2063_WriteSub(pInfo, MT2063_REG_LO2CQ_3, &pInfo->reg[MT2063_REG_LO2CQ_3], 1); /* 0x05 */ } /* Write out the FIFF offset only if it's changing */ if (pInfo->reg[MT2063_REG_FIFF_OFFSET] != @@ -4299,8 +4189,7 @@ static u32 MT2063_Tune(struct MT2063_Info_t *pInfo, u32 f_in) pInfo->reg[MT2063_REG_FIFF_OFFSET] = (u8) fiffof; status |= - MT2063_WriteSub(pInfo->hUserData, - pInfo->address, + MT2063_WriteSub(pInfo, MT2063_REG_FIFF_OFFSET, &pInfo-> reg[MT2063_REG_FIFF_OFFSET], @@ -4316,7 +4205,7 @@ static u32 MT2063_Tune(struct MT2063_Info_t *pInfo, u32 f_in) status |= MT2063_GetLocked(pInfo); } /* - ** If we locked OK, assign calculated data to MT2063_Info_t structure + ** If we locked OK, assign calculated data to mt2063_state structure */ if (status >= 0) { pInfo->f_IF1_actual = pInfo->AS_Data.f_LO1 - f_in; @@ -4461,9 +4350,9 @@ static int mt2063_init(struct dvb_frontend *fe) u32 status = -EINVAL; struct mt2063_state *state = fe->tuner_priv; - status = MT2063_Open(0xC0, &(state->MT2063_ht), fe); - status |= MT2063_SoftwareShutdown(state->MT2063_ht, 1); - status |= MT2063_ClearPowerMaskBits(state->MT2063_ht, MT2063_ALL_SD); + status = MT2063_Open(fe); + status |= MT2063_SoftwareShutdown(state, 1); + status |= MT2063_ClearPowerMaskBits(state, MT2063_ALL_SD); if (0 != status) { printk("%s %d error status = 0x%x!!\n", __func__, __LINE__, @@ -4484,9 +4373,9 @@ static int mt2063_get_status(struct dvb_frontend *fe, u32 * status) } static int mt2063_get_state(struct dvb_frontend *fe, - enum tuner_param param, struct tuner_state *state) + enum tuner_param param, struct tuner_state *tunstate) { - struct mt2063_state *mt2063State = fe->tuner_priv; + struct mt2063_state *state = fe->tuner_priv; switch (param) { case DVBFE_TUNER_FREQUENCY: @@ -4500,21 +4389,19 @@ static int mt2063_get_state(struct dvb_frontend *fe, //get bandwidth break; case DVBFE_TUNER_REFCLOCK: - state->refclock = - (u32) - MT2063_GetLocked((void *) (mt2063State->MT2063_ht)); + tunstate->refclock = (u32) MT2063_GetLocked(state); break; default: break; } - return (int)state->refclock; + return (int)tunstate->refclock; } static int mt2063_set_state(struct dvb_frontend *fe, - enum tuner_param param, struct tuner_state *state) + enum tuner_param param, struct tuner_state *tunstate) { - struct mt2063_state *mt2063State = fe->tuner_priv; + struct mt2063_state *state = fe->tuner_priv; u32 status = 0; switch (param) { @@ -4522,11 +4409,11 @@ static int mt2063_set_state(struct dvb_frontend *fe, //set frequency status = - MT_Tune_atv((void *) (mt2063State->MT2063_ht), - state->frequency, state->bandwidth, - mt2063State->tv_type); + MT_Tune_atv(state, + tunstate->frequency, tunstate->bandwidth, + state->tv_type); - mt2063State->frequency = state->frequency; + state->frequency = tunstate->frequency; break; case DVBFE_TUNER_TUNERSTEP: break; @@ -4534,20 +4421,20 @@ static int mt2063_set_state(struct dvb_frontend *fe, break; case DVBFE_TUNER_BANDWIDTH: //set bandwidth - mt2063State->bandwidth = state->bandwidth; + state->bandwidth = tunstate->bandwidth; break; case DVBFE_TUNER_REFCLOCK: break; case DVBFE_TUNER_OPEN: - status = MT2063_Open(MT2063_I2C, &(mt2063State->MT2063_ht), fe); + status = MT2063_Open(fe); break; case DVBFE_TUNER_SOFTWARE_SHUTDOWN: - status = MT2063_SoftwareShutdown(mt2063State->MT2063_ht, 1); + status = MT2063_SoftwareShutdown(state, 1); break; case DVBFE_TUNER_CLEAR_POWER_MASKBITS: status = - MT2063_ClearPowerMaskBits(mt2063State->MT2063_ht, + MT2063_ClearPowerMaskBits(state, MT2063_ALL_SD); break; default: -- 2.41.0