From 515e6dd20b3ff1acc94d026935fc4be080a224c5 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 14 Mar 2013 15:27:31 -0700 Subject: [PATCH] Staging: ccg: delete it from the tree Now that it isn't in the build, just delete the ccg driver from the tree entirely. Cc: John Stultz Cc: Paul Bolle Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ccg/Kconfig | 25 - drivers/staging/ccg/Makefile | 2 - drivers/staging/ccg/TODO | 6 - drivers/staging/ccg/ccg.c | 1292 ---------- drivers/staging/ccg/composite.c | 1688 ------------ drivers/staging/ccg/composite.h | 395 --- drivers/staging/ccg/config.c | 158 -- drivers/staging/ccg/epautoconf.c | 393 --- drivers/staging/ccg/f_acm.c | 814 ------ drivers/staging/ccg/f_fs.c | 2455 ------------------ drivers/staging/ccg/f_mass_storage.c | 3135 ----------------------- drivers/staging/ccg/f_rndis.c | 918 ------- drivers/staging/ccg/gadget_chips.h | 150 -- drivers/staging/ccg/ndis.h | 47 - drivers/staging/ccg/rndis.c | 1175 --------- drivers/staging/ccg/rndis.h | 222 -- drivers/staging/ccg/storage_common.c | 893 ------- drivers/staging/ccg/sysfs-class-ccg_usb | 158 -- drivers/staging/ccg/u_ether.c | 986 ------- drivers/staging/ccg/u_ether.h | 154 -- drivers/staging/ccg/u_serial.c | 1339 ---------- drivers/staging/ccg/u_serial.h | 65 - drivers/staging/ccg/usbstring.c | 71 - 23 files changed, 16541 deletions(-) delete mode 100644 drivers/staging/ccg/Kconfig delete mode 100644 drivers/staging/ccg/Makefile delete mode 100644 drivers/staging/ccg/TODO delete mode 100644 drivers/staging/ccg/ccg.c delete mode 100644 drivers/staging/ccg/composite.c delete mode 100644 drivers/staging/ccg/composite.h delete mode 100644 drivers/staging/ccg/config.c delete mode 100644 drivers/staging/ccg/epautoconf.c delete mode 100644 drivers/staging/ccg/f_acm.c delete mode 100644 drivers/staging/ccg/f_fs.c delete mode 100644 drivers/staging/ccg/f_mass_storage.c delete mode 100644 drivers/staging/ccg/f_rndis.c delete mode 100644 drivers/staging/ccg/gadget_chips.h delete mode 100644 drivers/staging/ccg/ndis.h delete mode 100644 drivers/staging/ccg/rndis.c delete mode 100644 drivers/staging/ccg/rndis.h delete mode 100644 drivers/staging/ccg/storage_common.c delete mode 100644 drivers/staging/ccg/sysfs-class-ccg_usb delete mode 100644 drivers/staging/ccg/u_ether.c delete mode 100644 drivers/staging/ccg/u_ether.h delete mode 100644 drivers/staging/ccg/u_serial.c delete mode 100644 drivers/staging/ccg/u_serial.h delete mode 100644 drivers/staging/ccg/usbstring.c diff --git a/drivers/staging/ccg/Kconfig b/drivers/staging/ccg/Kconfig deleted file mode 100644 index 7ed5bc6caad..00000000000 --- a/drivers/staging/ccg/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -if USB_GADGET - -config USB_G_CCG - tristate "Configurable Composite Gadget (STAGING)" - depends on STAGING && BLOCK && NET && !USB_ZERO && !USB_ZERO_HNPTEST && !USB_AUDIO && !GADGET_UAC1 && !USB_ETH && !USB_ETH_RNDIS && !USB_ETH_EEM && !USB_G_NCM && !USB_GADGETFS && !USB_FUNCTIONFS && !USB_FUNCTIONFS_ETH && !USB_FUNCTIONFS_RNDIS && !USB_FUNCTIONFS_GENERIC && !USB_FILE_STORAGE && !USB_FILE_STORAGE_TEST && !USB_MASS_STORAGE && !USB_G_SERIAL && !USB_MIDI_GADGET && !USB_G_PRINTER && !USB_CDC_COMPOSITE && !USB_G_NOKIA && !USB_G_ACM_MS && !USB_G_MULTI && !USB_G_MULTI_RNDIS && !USB_G_MULTI_CDC && !USB_G_HID && !USB_G_DBGP && !USB_G_WEBCAM && TTY - help - The Configurable Composite Gadget supports multiple USB - functions: acm, mass storage, rndis and FunctionFS. - Each function can be configured and enabled/disabled - dynamically from userspace through a sysfs interface. - - In order to compile this (either as a module or built-in), - "USB Gadget Drivers" and anything under it must not be - selected compiled-in in - Device Drivers->USB Support->USB Gadget Support. - However, you can say "M" there, if you do, the - Configurable Composite Gadget can be compiled "M" only - or not at all. - - BIG FAT NOTE: DON'T RELY ON THIS USERINTERFACE HERE! AS PART - OF THE REWORK DONE HERE WILL BE A NEW USER INTERFACE WITHOUT ANY - COMPATIBILITY TO THIS SYSFS INTERFACE HERE. BE AWARE OF THIS - BEFORE SELECTING THIS. - -endif # USB_GADGET diff --git a/drivers/staging/ccg/Makefile b/drivers/staging/ccg/Makefile deleted file mode 100644 index 814fa9de5f5..00000000000 --- a/drivers/staging/ccg/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -g_ccg-y := ccg.o -obj-$(CONFIG_USB_G_CCG) += g_ccg.o diff --git a/drivers/staging/ccg/TODO b/drivers/staging/ccg/TODO deleted file mode 100644 index 18612fe7017..00000000000 --- a/drivers/staging/ccg/TODO +++ /dev/null @@ -1,6 +0,0 @@ -TODO: - - change configuration interface from sysfs to configfs - -Please send patches to Greg Kroah-Hartmann , -Andrzej Pietrasiewicz , and -Cc: Mike Lockwood diff --git a/drivers/staging/ccg/ccg.c b/drivers/staging/ccg/ccg.c deleted file mode 100644 index ffc5f73a5b5..00000000000 --- a/drivers/staging/ccg/ccg.c +++ /dev/null @@ -1,1292 +0,0 @@ -/* - * Configurable Composite Gadget - * - * Initially contributed as "Android Composite Gdaget" by: - * - * Copyright (C) 2008 Google, Inc. - * Author: Mike Lockwood - * Benoit Goby - * - * Tailoring it to become a generic Configurable Composite Gadget is - * - * Copyright (C) 2012 Samsung Electronics - * Author: Andrzej Pietrasiewicz - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include "composite.h" -#include - -#include "gadget_chips.h" - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "usbstring.c" -#include "config.c" -#include "epautoconf.c" -#include "composite.c" - -#include "f_mass_storage.c" -#include "u_serial.c" -#include "f_acm.c" -#define USB_ETH_RNDIS y -#include "f_rndis.c" -#include "rndis.c" -#include "u_ether.c" -#include "f_fs.c" - -MODULE_AUTHOR("Mike Lockwood, Andrzej Pietrasiewicz"); -MODULE_DESCRIPTION("Configurable Composite USB Gadget"); -MODULE_LICENSE("GPL"); -MODULE_VERSION("1.0"); - -static const char longname[] = "Configurable Composite Gadget"; - -/* Default vendor and product IDs, overridden by userspace */ -#define VENDOR_ID 0x1d6b /* Linux Foundation */ -#define PRODUCT_ID 0x0107 -#define GFS_MAX_DEVS 10 - -struct ccg_usb_function { - char *name; - void *config; - - struct device *dev; - char *dev_name; - struct device_attribute **attributes; - - /* for ccg_dev.enabled_functions */ - struct list_head enabled_list; - - /* Optional: initialization during gadget bind */ - int (*init)(struct ccg_usb_function *, struct usb_composite_dev *); - /* Optional: cleanup during gadget unbind */ - void (*cleanup)(struct ccg_usb_function *); - - int (*bind_config)(struct ccg_usb_function *, - struct usb_configuration *); - - /* Optional: called when the configuration is removed */ - void (*unbind_config)(struct ccg_usb_function *, - struct usb_configuration *); - /* Optional: handle ctrl requests before the device is configured */ - int (*ctrlrequest)(struct ccg_usb_function *, - struct usb_composite_dev *, - const struct usb_ctrlrequest *); -}; - -struct ffs_obj { - const char *name; - bool mounted; - bool desc_ready; - bool used; - struct ffs_data *ffs_data; -}; - -struct ccg_dev { - struct ccg_usb_function **functions; - struct list_head enabled_functions; - struct usb_composite_dev *cdev; - struct device *dev; - - bool enabled; - struct mutex mutex; - bool connected; - bool sw_connected; - struct work_struct work; - - unsigned int max_func_num; - unsigned int func_num; - struct ffs_obj ffs_tab[GFS_MAX_DEVS]; -}; - -static struct class *ccg_class; -static struct ccg_dev *_ccg_dev; -static int ccg_bind_config(struct usb_configuration *c); -static void ccg_unbind_config(struct usb_configuration *c); - -static char func_names_buf[256]; - -static struct usb_device_descriptor device_desc = { - .bLength = sizeof(device_desc), - .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = __constant_cpu_to_le16(0x0200), - .bDeviceClass = USB_CLASS_PER_INTERFACE, - .idVendor = __constant_cpu_to_le16(VENDOR_ID), - .idProduct = __constant_cpu_to_le16(PRODUCT_ID), - .bcdDevice = __constant_cpu_to_le16(0xffff), - .bNumConfigurations = 1, -}; - -static struct usb_configuration ccg_config_driver = { - .label = "ccg", - .unbind = ccg_unbind_config, - .bConfigurationValue = 1, - .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, - .bMaxPower = 0xFA, /* 500ma */ -}; - -static void ccg_work(struct work_struct *data) -{ - struct ccg_dev *dev = container_of(data, struct ccg_dev, work); - struct usb_composite_dev *cdev = dev->cdev; - static char *disconnected[2] = { "USB_STATE=DISCONNECTED", NULL }; - static char *connected[2] = { "USB_STATE=CONNECTED", NULL }; - static char *configured[2] = { "USB_STATE=CONFIGURED", NULL }; - char **uevent_envp = NULL; - unsigned long flags; - - spin_lock_irqsave(&cdev->lock, flags); - if (cdev->config) - uevent_envp = configured; - else if (dev->connected != dev->sw_connected) - uevent_envp = dev->connected ? connected : disconnected; - dev->sw_connected = dev->connected; - spin_unlock_irqrestore(&cdev->lock, flags); - - if (uevent_envp) { - kobject_uevent_env(&dev->dev->kobj, KOBJ_CHANGE, uevent_envp); - pr_info("%s: sent uevent %s\n", __func__, uevent_envp[0]); - } else { - pr_info("%s: did not send uevent (%d %d %p)\n", __func__, - dev->connected, dev->sw_connected, cdev->config); - } -} - - -/*-------------------------------------------------------------------------*/ -/* Supported functions initialization */ - -static struct ffs_obj *functionfs_find_dev(struct ccg_dev *dev, - const char *dev_name) -{ - int i; - - for (i = 0; i < dev->max_func_num; i++) - if (strcmp(dev->ffs_tab[i].name, dev_name) == 0) - return &dev->ffs_tab[i]; - - return NULL; -} - -static bool functionfs_all_ready(struct ccg_dev *dev) -{ - int i; - - for (i = 0; i < dev->max_func_num; i++) - if (dev->ffs_tab[i].used && !dev->ffs_tab[i].desc_ready) - return false; - - return true; -} - -static int functionfs_ready_callback(struct ffs_data *ffs) -{ - struct ffs_obj *ffs_obj; - int ret; - - mutex_lock(&_ccg_dev->mutex); - - ffs_obj = ffs->private_data; - if (!ffs_obj) { - ret = -EINVAL; - goto done; - } - if (WARN_ON(ffs_obj->desc_ready)) { - ret = -EBUSY; - goto done; - } - ffs_obj->ffs_data = ffs; - - if (functionfs_all_ready(_ccg_dev)) { - ret = -EBUSY; - goto done; - } - ffs_obj->desc_ready = true; - -done: - mutex_unlock(&_ccg_dev->mutex); - return ret; -} - -static void reset_usb(struct ccg_dev *dev) -{ - /* Cancel pending control requests */ - usb_ep_dequeue(dev->cdev->gadget->ep0, dev->cdev->req); - usb_remove_config(dev->cdev, &ccg_config_driver); - dev->enabled = false; - usb_gadget_disconnect(dev->cdev->gadget); -} - -static void functionfs_closed_callback(struct ffs_data *ffs) -{ - struct ffs_obj *ffs_obj; - - mutex_lock(&_ccg_dev->mutex); - - ffs_obj = ffs->private_data; - if (!ffs_obj) - goto done; - - ffs_obj->desc_ready = false; - - if (_ccg_dev->enabled) - reset_usb(_ccg_dev); - -done: - mutex_unlock(&_ccg_dev->mutex); -} - -static void *functionfs_acquire_dev_callback(const char *dev_name) -{ - struct ffs_obj *ffs_dev; - - mutex_lock(&_ccg_dev->mutex); - - ffs_dev = functionfs_find_dev(_ccg_dev, dev_name); - if (!ffs_dev) { - ffs_dev = ERR_PTR(-ENODEV); - goto done; - } - - if (ffs_dev->mounted) { - ffs_dev = ERR_PTR(-EBUSY); - goto done; - } - ffs_dev->mounted = true; - -done: - mutex_unlock(&_ccg_dev->mutex); - return ffs_dev; -} - -static void functionfs_release_dev_callback(struct ffs_data *ffs_data) -{ - struct ffs_obj *ffs_dev; - - mutex_lock(&_ccg_dev->mutex); - - ffs_dev = ffs_data->private_data; - if (ffs_dev) - ffs_dev->mounted = false; - - mutex_unlock(&_ccg_dev->mutex); -} - -static int functionfs_function_init(struct ccg_usb_function *f, - struct usb_composite_dev *cdev) -{ - return functionfs_init(); -} - -static void functionfs_function_cleanup(struct ccg_usb_function *f) -{ - functionfs_cleanup(); -} - -static int functionfs_function_bind_config(struct ccg_usb_function *f, - struct usb_configuration *c) -{ - struct ccg_dev *dev = _ccg_dev; - int i, ret; - - for (i = dev->max_func_num; i--; ) { - if (!dev->ffs_tab[i].used) - continue; - ret = functionfs_bind(dev->ffs_tab[i].ffs_data, c->cdev); - if (unlikely(ret < 0)) { - while (++i < dev->max_func_num) - functionfs_unbind(dev->ffs_tab[i].ffs_data); - return ret; - } - } - - for (i = dev->max_func_num; i--; ) { - if (!dev->ffs_tab[i].used) - continue; - ret = functionfs_bind_config(c->cdev, c, - dev->ffs_tab[i].ffs_data); - if (unlikely(ret < 0)) - return ret; - } - - return 0; -} - -static void functionfs_function_unbind_config(struct ccg_usb_function *f, - struct usb_configuration *c) -{ - struct ccg_dev *dev = _ccg_dev; - int i; - - for (i = dev->max_func_num; i--; ) - if (dev->ffs_tab[i].ffs_data) - functionfs_unbind(dev->ffs_tab[i].ffs_data); -} - -static ssize_t functionfs_user_functions_show(struct device *_dev, - struct device_attribute *attr, - char *buf) -{ - struct ccg_dev *dev = _ccg_dev; - char *buff = buf; - int i; - - mutex_lock(&dev->mutex); - - for (i = 0; i < dev->max_func_num; i++) - buff += snprintf(buff, PAGE_SIZE + buf - buff, "%s,", - dev->ffs_tab[i].name); - - mutex_unlock(&dev->mutex); - - if (buff != buf) - *(buff - 1) = '\n'; - return buff - buf; -} - -static ssize_t functionfs_user_functions_store(struct device *_dev, - struct device_attribute *attr, - const char *buff, size_t size) -{ - struct ccg_dev *dev = _ccg_dev; - char *name, *b; - ssize_t ret = size; - int i; - - buff = skip_spaces(buff); - if (!*buff) - return -EINVAL; - - mutex_lock(&dev->mutex); - - if (dev->enabled) { - ret = -EBUSY; - goto end; - } - - for (i = 0; i < dev->max_func_num; i++) - if (dev->ffs_tab[i].mounted) { - ret = -EBUSY; - goto end; - } - - strlcpy(func_names_buf, buff, sizeof(func_names_buf)); - b = strim(func_names_buf); - - /* replace the list of functions */ - dev->max_func_num = 0; - while (b) { - name = strsep(&b, ","); - if (dev->max_func_num == GFS_MAX_DEVS) { - ret = -ENOSPC; - goto end; - } - if (functionfs_find_dev(dev, name)) { - ret = -EEXIST; - continue; - } - dev->ffs_tab[dev->max_func_num++].name = name; - } - -end: - mutex_unlock(&dev->mutex); - return ret; -} - -static DEVICE_ATTR(user_functions, S_IRUGO | S_IWUSR, - functionfs_user_functions_show, - functionfs_user_functions_store); - -static ssize_t functionfs_max_user_functions_show(struct device *_dev, - struct device_attribute *attr, - char *buf) -{ - return sprintf(buf, "%d", GFS_MAX_DEVS); -} - -static DEVICE_ATTR(max_user_functions, S_IRUGO, - functionfs_max_user_functions_show, NULL); - -static struct device_attribute *functionfs_function_attributes[] = { - &dev_attr_user_functions, - &dev_attr_max_user_functions, - NULL -}; - -static struct ccg_usb_function functionfs_function = { - .name = "fs", - .init = functionfs_function_init, - .cleanup = functionfs_function_cleanup, - .bind_config = functionfs_function_bind_config, - .unbind_config = functionfs_function_unbind_config, - .attributes = functionfs_function_attributes, -}; - -#define MAX_ACM_INSTANCES 4 -struct acm_function_config { - int instances; -}; - -static int -acm_function_init(struct ccg_usb_function *f, struct usb_composite_dev *cdev) -{ - f->config = kzalloc(sizeof(struct acm_function_config), GFP_KERNEL); - if (!f->config) - return -ENOMEM; - - return gserial_setup(cdev->gadget, MAX_ACM_INSTANCES); -} - -static void acm_function_cleanup(struct ccg_usb_function *f) -{ - gserial_cleanup(); - kfree(f->config); - f->config = NULL; -} - -static int -acm_function_bind_config(struct ccg_usb_function *f, - struct usb_configuration *c) -{ - int i; - int ret = 0; - struct acm_function_config *config = f->config; - - for (i = 0; i < config->instances; i++) { - ret = acm_bind_config(c, i); - if (ret) { - pr_err("Could not bind acm%u config\n", i); - break; - } - } - - return ret; -} - -static ssize_t acm_instances_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct ccg_usb_function *f = dev_get_drvdata(dev); - struct acm_function_config *config = f->config; - return sprintf(buf, "%d\n", config->instances); -} - -static ssize_t acm_instances_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct ccg_usb_function *f = dev_get_drvdata(dev); - struct acm_function_config *config = f->config; - int value; - int ret = 0; - - ret = kstrtoint(buf, 10, &value); - if (ret) - return ret; - - if (value > MAX_ACM_INSTANCES) - return -EINVAL; - - config->instances = value; - - return size; -} - -static DEVICE_ATTR(instances, S_IRUGO | S_IWUSR, acm_instances_show, - acm_instances_store); -static struct device_attribute *acm_function_attributes[] = { - &dev_attr_instances, - NULL -}; - -static struct ccg_usb_function acm_function = { - .name = "acm", - .init = acm_function_init, - .cleanup = acm_function_cleanup, - .bind_config = acm_function_bind_config, - .attributes = acm_function_attributes, -}; - -struct rndis_function_config { - u8 ethaddr[ETH_ALEN]; - u32 vendorID; - char manufacturer[256]; - /* "Wireless" RNDIS; auto-detected by Windows */ - bool wceis; -}; - -static int rndis_function_init(struct ccg_usb_function *f, - struct usb_composite_dev *cdev) -{ - f->config = kzalloc(sizeof(struct rndis_function_config), GFP_KERNEL); - if (!f->config) - return -ENOMEM; - return 0; -} - -static void rndis_function_cleanup(struct ccg_usb_function *f) -{ - kfree(f->config); - f->config = NULL; -} - -static int rndis_function_bind_config(struct ccg_usb_function *f, - struct usb_configuration *c) -{ - int ret; - struct rndis_function_config *rndis = f->config; - - if (!rndis) { - pr_err("%s: rndis_pdata\n", __func__); - return -1; - } - - pr_info("%s MAC: %pM\n", __func__, rndis->ethaddr); - - ret = gether_setup_name(c->cdev->gadget, rndis->ethaddr, "rndis"); - if (ret) { - pr_err("%s: gether_setup failed\n", __func__); - return ret; - } - - if (rndis->wceis) { - /* "Wireless" RNDIS; auto-detected by Windows */ - rndis_iad_descriptor.bFunctionClass = - USB_CLASS_WIRELESS_CONTROLLER; - rndis_iad_descriptor.bFunctionSubClass = 0x01; - rndis_iad_descriptor.bFunctionProtocol = 0x03; - rndis_control_intf.bInterfaceClass = - USB_CLASS_WIRELESS_CONTROLLER; - rndis_control_intf.bInterfaceSubClass = 0x01; - rndis_control_intf.bInterfaceProtocol = 0x03; - } - - return rndis_bind_config_vendor(c, rndis->ethaddr, rndis->vendorID, - rndis->manufacturer); -} - -static void rndis_function_unbind_config(struct ccg_usb_function *f, - struct usb_configuration *c) -{ - gether_cleanup(); -} - -static ssize_t rndis_manufacturer_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct ccg_usb_function *f = dev_get_drvdata(dev); - struct rndis_function_config *config = f->config; - return sprintf(buf, "%s\n", config->manufacturer); -} - -static ssize_t rndis_manufacturer_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct ccg_usb_function *f = dev_get_drvdata(dev); - struct rndis_function_config *config = f->config; - - if (size >= sizeof(config->manufacturer)) - return -EINVAL; - memcpy(config->manufacturer, buf, size); - config->manufacturer[size] = 0; - - return size; -} - -static DEVICE_ATTR(manufacturer, S_IRUGO | S_IWUSR, rndis_manufacturer_show, - rndis_manufacturer_store); - -static ssize_t rndis_wceis_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct ccg_usb_function *f = dev_get_drvdata(dev); - struct rndis_function_config *config = f->config; - return sprintf(buf, "%d\n", config->wceis); -} - -static ssize_t rndis_wceis_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct ccg_usb_function *f = dev_get_drvdata(dev); - struct rndis_function_config *config = f->config; - int value; - int ret; - - ret = kstrtoint(buf, 10, &value); - if (ret) - return ret; - - config->wceis = value; - - return size; -} - -static DEVICE_ATTR(wceis, S_IRUGO | S_IWUSR, rndis_wceis_show, - rndis_wceis_store); - -static ssize_t rndis_ethaddr_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct ccg_usb_function *f = dev_get_drvdata(dev); - struct rndis_function_config *rndis = f->config; - return sprintf(buf, "%pM\n", rndis->ethaddr); -} - -static ssize_t rndis_ethaddr_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct ccg_usb_function *f = dev_get_drvdata(dev); - struct rndis_function_config *rndis = f->config; - unsigned char tmp[6]; - - if (sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", - tmp + 0, tmp + 1, tmp + 2, tmp + 3, tmp + 4, tmp + 5) != - ETH_ALEN) - return -EINVAL; - - memcpy(rndis->ethaddr, tmp, ETH_ALEN); - - return ETH_ALEN; - -} - -static DEVICE_ATTR(ethaddr, S_IRUGO | S_IWUSR, rndis_ethaddr_show, - rndis_ethaddr_store); - -static ssize_t rndis_vendorID_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct ccg_usb_function *f = dev_get_drvdata(dev); - struct rndis_function_config *config = f->config; - return sprintf(buf, "%04x\n", config->vendorID); -} - -static ssize_t rndis_vendorID_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct ccg_usb_function *f = dev_get_drvdata(dev); - struct rndis_function_config *config = f->config; - int value; - int ret; - - ret = kstrtou32(buf, 16, &value); - if (ret) - return ret; - - config->vendorID = value; - - return size; -} - -static DEVICE_ATTR(vendorID, S_IRUGO | S_IWUSR, rndis_vendorID_show, - rndis_vendorID_store); - -static struct device_attribute *rndis_function_attributes[] = { - &dev_attr_manufacturer, - &dev_attr_wceis, - &dev_attr_ethaddr, - &dev_attr_vendorID, - NULL -}; - -static struct ccg_usb_function rndis_function = { - .name = "rndis", - .init = rndis_function_init, - .cleanup = rndis_function_cleanup, - .bind_config = rndis_function_bind_config, - .unbind_config = rndis_function_unbind_config, - .attributes = rndis_function_attributes, -}; - -static int mass_storage_function_init(struct ccg_usb_function *f, - struct usb_composite_dev *cdev) -{ - struct fsg_config fsg; - struct fsg_common *common; - int err; - - memset(&fsg, 0, sizeof(fsg)); - fsg.nluns = 1; - fsg.luns[0].removable = 1; - fsg.vendor_name = iManufacturer; - fsg.product_name = iProduct; - - common = fsg_common_init(NULL, cdev, &fsg); - if (IS_ERR(common)) - return PTR_ERR(common); - - err = sysfs_create_link(&f->dev->kobj, - &common->luns[0].dev.kobj, - "lun"); - if (err) { - fsg_common_put(common); - return err; - } - - f->config = common; - return 0; -} - -static void mass_storage_function_cleanup(struct ccg_usb_function *f) -{ - fsg_common_put(f->config); - f->config = NULL; -} - -static int mass_storage_function_bind_config(struct ccg_usb_function *f, - struct usb_configuration *c) -{ - struct fsg_common *common = f->config; - return fsg_bind_config(c->cdev, c, common); -} - -static struct ccg_usb_function mass_storage_function = { - .name = "mass_storage", - .init = mass_storage_function_init, - .cleanup = mass_storage_function_cleanup, - .bind_config = mass_storage_function_bind_config, -}; - -static struct ccg_usb_function *supported_functions[] = { - &functionfs_function, - &acm_function, - &rndis_function, - &mass_storage_function, - NULL -}; - - -static int ccg_init_functions(struct ccg_usb_function **functions, - struct usb_composite_dev *cdev) -{ - struct ccg_dev *dev = _ccg_dev; - struct ccg_usb_function *f; - struct device_attribute **attrs; - struct device_attribute *attr; - int err; - int index = 0; - - for (; (f = *functions++); index++) { - f->dev_name = kasprintf(GFP_KERNEL, "f_%s", f->name); - if (!f->dev_name) { - pr_err("%s: Failed to alloc name %s", __func__, - f->name); - err = -ENOMEM; - goto err_alloc; - } - f->dev = device_create(ccg_class, dev->dev, - MKDEV(0, index), f, f->dev_name); - if (IS_ERR(f->dev)) { - pr_err("%s: Failed to create dev %s", __func__, - f->dev_name); - err = PTR_ERR(f->dev); - f->dev = NULL; - goto err_create; - } - - if (f->init) { - err = f->init(f, cdev); - if (err) { - pr_err("%s: Failed to init %s", __func__, - f->name); - goto err_out; - } - } - - attrs = f->attributes; - if (attrs) { - while ((attr = *attrs++) && !err) - err = device_create_file(f->dev, attr); - } - if (err) { - pr_err("%s: Failed to create function %s attributes", - __func__, f->name); - goto err_uninit; - } - } - return 0; - -err_uninit: - if (f->cleanup) - f->cleanup(f); -err_out: - device_destroy(ccg_class, f->dev->devt); - f->dev = NULL; -err_create: - kfree(f->dev_name); -err_alloc: - return err; -} - -static void ccg_cleanup_functions(struct ccg_usb_function **functions) -{ - struct ccg_usb_function *f; - - while (*functions) { - f = *functions++; - - if (f->dev) { - if (f->cleanup) - f->cleanup(f); - device_destroy(ccg_class, f->dev->devt); - kfree(f->dev_name); - } - } -} - -static int ccg_bind_enabled_functions(struct ccg_dev *dev, - struct usb_configuration *c) -{ - struct ccg_usb_function *f; - int ret; - - list_for_each_entry(f, &dev->enabled_functions, enabled_list) { - ret = f->bind_config(f, c); - if (ret) { - pr_err("%s: %s failed", __func__, f->name); - return ret; - } - } - return 0; -} - -static void ccg_unbind_enabled_functions(struct ccg_dev *dev, - struct usb_configuration *c) -{ - struct ccg_usb_function *f; - - list_for_each_entry(f, &dev->enabled_functions, enabled_list) - if (f->unbind_config) - f->unbind_config(f, c); -} - -static int ccg_enable_function(struct ccg_dev *dev, char *name) -{ - struct ccg_usb_function **functions = dev->functions; - struct ccg_usb_function *f; - while ((f = *functions++)) { - if (!strcmp(name, f->name)) { - list_add_tail(&f->enabled_list, - &dev->enabled_functions); - return 0; - } - } - return -EINVAL; -} - -/*-------------------------------------------------------------------------*/ -/* /sys/class/ccg_usb/ccg%d/ interface */ - -static ssize_t -functions_show(struct device *pdev, struct device_attribute *attr, char *buf) -{ - struct ccg_dev *dev = dev_get_drvdata(pdev); - struct ccg_usb_function *f; - char *buff = buf; - int i; - - mutex_lock(&dev->mutex); - - list_for_each_entry(f, &dev->enabled_functions, enabled_list) - buff += sprintf(buff, "%s,", f->name); - for (i = 0; i < dev->max_func_num; i++) - if (dev->ffs_tab[i].used) - buff += sprintf(buff, "%s", dev->ffs_tab[i].name); - - mutex_unlock(&dev->mutex); - - if (buff != buf) - *(buff-1) = '\n'; - return buff - buf; -} - -static ssize_t -functions_store(struct device *pdev, struct device_attribute *attr, - const char *buff, size_t size) -{ - struct ccg_dev *dev = dev_get_drvdata(pdev); - char *name; - char buf[256], *b; - int err, i; - bool functionfs_enabled; - - buff = skip_spaces(buff); - if (!*buff) - return -EINVAL; - - mutex_lock(&dev->mutex); - - if (dev->enabled) { - mutex_unlock(&dev->mutex); - return -EBUSY; - } - - INIT_LIST_HEAD(&dev->enabled_functions); - functionfs_enabled = false; - for (i = 0; i < dev->max_func_num; i++) - dev->ffs_tab[i].used = false; - - strlcpy(buf, buff, sizeof(buf)); - b = strim(buf); - - while (b) { - struct ffs_obj *user_func; - - name = strsep(&b, ","); - /* handle FunctionFS implicitly */ - if (!strcmp(name, functionfs_function.name)) { - pr_err("ccg_usb: Cannot explicitly enable '%s'", name); - continue; - } - user_func = functionfs_find_dev(dev, name); - if (user_func) - name = functionfs_function.name; - err = 0; - if (!user_func || !functionfs_enabled) - err = ccg_enable_function(dev, name); - if (err) - pr_err("ccg_usb: Cannot enable '%s'", name); - else if (user_func) { - user_func->used = true; - dev->func_num++; - functionfs_enabled = true; - } - } - - mutex_unlock(&dev->mutex); - - return size; -} - -static ssize_t enable_show(struct device *pdev, struct device_attribute *attr, - char *buf) -{ - struct ccg_dev *dev = dev_get_drvdata(pdev); - return sprintf(buf, "%d\n", dev->enabled); -} - -static ssize_t enable_store(struct device *pdev, struct device_attribute *attr, - const char *buff, size_t size) -{ - struct ccg_dev *dev = dev_get_drvdata(pdev); - struct usb_composite_dev *cdev = dev->cdev; - int enabled = 0; - - mutex_lock(&dev->mutex); - sscanf(buff, "%d", &enabled); - if (enabled && dev->func_num && !functionfs_all_ready(dev)) { - mutex_unlock(&dev->mutex); - return -ENODEV; - } - - if (enabled && !dev->enabled) { - int ret; - - cdev->next_string_id = 0; - /* - * Update values in composite driver's copy of - * device descriptor. - */ - cdev->desc.bDeviceClass = device_desc.bDeviceClass; - cdev->desc.bDeviceSubClass = device_desc.bDeviceSubClass; - cdev->desc.bDeviceProtocol = device_desc.bDeviceProtocol; - cdev->desc.idVendor = idVendor; - cdev->desc.idProduct = idProduct; - cdev->desc.bcdDevice = bcdDevice; - - usb_add_config(cdev, &ccg_config_driver, ccg_bind_config); - dev->enabled = true; - ret = usb_gadget_connect(cdev->gadget); - if (ret) { - dev->enabled = false; - usb_remove_config(cdev, &ccg_config_driver); - } - } else if (!enabled && dev->enabled) { - reset_usb(dev); - } else { - pr_err("ccg_usb: already %s\n", - dev->enabled ? "enabled" : "disabled"); - } - - mutex_unlock(&dev->mutex); - return size; -} - -static ssize_t state_show(struct device *pdev, struct device_attribute *attr, - char *buf) -{ - struct ccg_dev *dev = dev_get_drvdata(pdev); - struct usb_composite_dev *cdev = dev->cdev; - char *state = "DISCONNECTED"; - unsigned long flags; - - if (!cdev) - goto out; - - spin_lock_irqsave(&cdev->lock, flags); - if (cdev->config) - state = "CONFIGURED"; - else if (dev->connected) - state = "CONNECTED"; - spin_unlock_irqrestore(&cdev->lock, flags); -out: - return sprintf(buf, "%s\n", state); -} - -#define DESCRIPTOR_ATTR(field, format_string) \ -static ssize_t \ -field ## _show(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return sprintf(buf, format_string, device_desc.field); \ -} \ -static ssize_t \ -field ## _store(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t size) \ -{ \ - int value; \ - if (sscanf(buf, format_string, &value) == 1) { \ - device_desc.field = value; \ - return size; \ - } \ - return -1; \ -} \ -static DEVICE_ATTR(field, S_IRUGO | S_IWUSR, field ## _show, field ## _store); - -DESCRIPTOR_ATTR(bDeviceClass, "%d\n") -DESCRIPTOR_ATTR(bDeviceSubClass, "%d\n") -DESCRIPTOR_ATTR(bDeviceProtocol, "%d\n") - -static DEVICE_ATTR(functions, S_IRUGO | S_IWUSR, functions_show, - functions_store); -static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, enable_show, enable_store); -static DEVICE_ATTR(state, S_IRUGO, state_show, NULL); - -static struct device_attribute *ccg_usb_attributes[] = { - &dev_attr_bDeviceClass, - &dev_attr_bDeviceSubClass, - &dev_attr_bDeviceProtocol, - &dev_attr_functions, - &dev_attr_enable, - &dev_attr_state, - NULL -}; - -/*-------------------------------------------------------------------------*/ -/* Composite driver */ - -static int ccg_bind_config(struct usb_configuration *c) -{ - struct ccg_dev *dev = _ccg_dev; - return ccg_bind_enabled_functions(dev, c); -} - -static void ccg_unbind_config(struct usb_configuration *c) -{ - struct ccg_dev *dev = _ccg_dev; - - ccg_unbind_enabled_functions(dev, c); - - usb_ep_autoconfig_reset(dev->cdev->gadget); -} - -static int ccg_bind(struct usb_composite_dev *cdev) -{ - struct ccg_dev *dev = _ccg_dev; - struct usb_gadget *gadget = cdev->gadget; - int gcnum, ret; - - /* - * Start disconnected. Userspace will connect the gadget once - * it is done configuring the functions. - */ - usb_gadget_disconnect(gadget); - - ret = ccg_init_functions(dev->functions, cdev); - if (ret) - return ret; - - gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); - else { - pr_warn("%s: controller '%s' not recognized\n", - longname, gadget->name); - device_desc.bcdDevice = __constant_cpu_to_le16(0x9999); - } - - usb_gadget_set_selfpowered(gadget); - dev->cdev = cdev; - - return 0; -} - -static int ccg_usb_unbind(struct usb_composite_dev *cdev) -{ - struct ccg_dev *dev = _ccg_dev; - - cancel_work_sync(&dev->work); - ccg_cleanup_functions(dev->functions); - return 0; -} - -static struct usb_composite_driver ccg_usb_driver = { - .name = "configurable_usb", - .dev = &device_desc, - .bind = ccg_bind, - .unbind = ccg_usb_unbind, - .needs_serial = true, - .iManufacturer = "Linux Foundation", - .iProduct = longname, - .iSerialNumber = "1234567890123456", -}; - -static int ccg_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *c) -{ - struct ccg_dev *dev = _ccg_dev; - struct usb_composite_dev *cdev = get_gadget_data(gadget); - struct usb_request *req = cdev->req; - struct ccg_usb_function *f; - int value = -EOPNOTSUPP; - unsigned long flags; - - req->zero = 0; - req->complete = composite_setup_complete; - req->length = 0; - gadget->ep0->driver_data = cdev; - - list_for_each_entry(f, &dev->enabled_functions, enabled_list) { - if (f->ctrlrequest) { - value = f->ctrlrequest(f, cdev, c); - if (value >= 0) - break; - } - } - - if (value < 0) - value = composite_setup(gadget, c); - - spin_lock_irqsave(&cdev->lock, flags); - if (!dev->connected) { - dev->connected = 1; - schedule_work(&dev->work); - } else if (c->bRequest == USB_REQ_SET_CONFIGURATION && - cdev->config) { - schedule_work(&dev->work); - } - spin_unlock_irqrestore(&cdev->lock, flags); - - return value; -} - -static void ccg_disconnect(struct usb_gadget *gadget) -{ - struct ccg_dev *dev = _ccg_dev; - struct usb_composite_dev *cdev = get_gadget_data(gadget); - unsigned long flags; - - composite_disconnect(gadget); - - spin_lock_irqsave(&cdev->lock, flags); - dev->connected = 0; - schedule_work(&dev->work); - spin_unlock_irqrestore(&cdev->lock, flags); -} - -static int ccg_create_device(struct ccg_dev *dev) -{ - struct device_attribute **attrs = ccg_usb_attributes; - struct device_attribute *attr; - int err; - - dev->dev = device_create(ccg_class, NULL, MKDEV(0, 0), NULL, "ccg0"); - if (IS_ERR(dev->dev)) - return PTR_ERR(dev->dev); - - dev_set_drvdata(dev->dev, dev); - - while ((attr = *attrs++)) { - err = device_create_file(dev->dev, attr); - if (err) { - device_destroy(ccg_class, dev->dev->devt); - return err; - } - } - return 0; -} - - -static int __init ccg_init(void) -{ - struct ccg_dev *dev; - int err; - - ccg_class = class_create(THIS_MODULE, "ccg_usb"); - if (IS_ERR(ccg_class)) - return PTR_ERR(ccg_class); - - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - class_destroy(ccg_class); - return -ENOMEM; - } - - dev->functions = supported_functions; - INIT_LIST_HEAD(&dev->enabled_functions); - INIT_WORK(&dev->work, ccg_work); - mutex_init(&dev->mutex); - - err = ccg_create_device(dev); - if (err) { - class_destroy(ccg_class); - kfree(dev); - return err; - } - - _ccg_dev = dev; - - /* Override composite driver functions */ - composite_driver.setup = ccg_setup; - composite_driver.disconnect = ccg_disconnect; - - err = usb_composite_probe(&ccg_usb_driver); - if (err) { - class_destroy(ccg_class); - kfree(dev); - } - - return err; -} -module_init(ccg_init); - -static void __exit ccg_exit(void) -{ - usb_composite_unregister(&ccg_usb_driver); - class_destroy(ccg_class); - kfree(_ccg_dev); - _ccg_dev = NULL; -} -module_exit(ccg_exit); diff --git a/drivers/staging/ccg/composite.c b/drivers/staging/ccg/composite.c deleted file mode 100644 index 228b4574f22..00000000000 --- a/drivers/staging/ccg/composite.c +++ /dev/null @@ -1,1688 +0,0 @@ -/* - * composite.c - infrastructure for Composite USB Gadgets - * - * Copyright (C) 2006-2008 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* #define VERBOSE_DEBUG */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -/* - * The code in this file is utility code, used to build a gadget driver - * from one or more "function" drivers, one or more "configuration" - * objects, and a "usb_composite_driver" by gluing them together along - * with the relevant device-wide data. - */ - -/* big enough to hold our biggest descriptor */ -#define USB_BUFSIZ 1024 - -static struct usb_composite_driver *composite; - -/* Some systems will need runtime overrides for the product identifiers - * published in the device descriptor, either numbers or strings or both. - * String parameters are in UTF-8 (superset of ASCII's 7 bit characters). - */ - -static ushort idVendor; -module_param(idVendor, ushort, 0644); -MODULE_PARM_DESC(idVendor, "USB Vendor ID"); - -static ushort idProduct; -module_param(idProduct, ushort, 0644); -MODULE_PARM_DESC(idProduct, "USB Product ID"); - -static ushort bcdDevice; -module_param(bcdDevice, ushort, 0644); -MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); - -static char *iManufacturer; -module_param(iManufacturer, charp, 0644); -MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); - -static char *iProduct; -module_param(iProduct, charp, 0644); -MODULE_PARM_DESC(iProduct, "USB Product string"); - -static char *iSerialNumber; -module_param(iSerialNumber, charp, 0644); -MODULE_PARM_DESC(iSerialNumber, "SerialNumber string"); - -static char composite_manufacturer[50]; - -/*-------------------------------------------------------------------------*/ -/** - * next_ep_desc() - advance to the next EP descriptor - * @t: currect pointer within descriptor array - * - * Return: next EP descriptor or NULL - * - * Iterate over @t until either EP descriptor found or - * NULL (that indicates end of list) encountered - */ -static struct usb_descriptor_header** -next_ep_desc(struct usb_descriptor_header **t) -{ - for (; *t; t++) { - if ((*t)->bDescriptorType == USB_DT_ENDPOINT) - return t; - } - return NULL; -} - -/* - * for_each_ep_desc()- iterate over endpoint descriptors in the - * descriptors list - * @start: pointer within descriptor array. - * @ep_desc: endpoint descriptor to use as the loop cursor - */ -#define for_each_ep_desc(start, ep_desc) \ - for (ep_desc = next_ep_desc(start); \ - ep_desc; ep_desc = next_ep_desc(ep_desc+1)) - -/** - * config_ep_by_speed() - configures the given endpoint - * according to gadget speed. - * @g: pointer to the gadget - * @f: usb function - * @_ep: the endpoint to configure - * - * Return: error code, 0 on success - * - * This function chooses the right descriptors for a given - * endpoint according to gadget speed and saves it in the - * endpoint desc field. If the endpoint already has a descriptor - * assigned to it - overwrites it with currently corresponding - * descriptor. The endpoint maxpacket field is updated according - * to the chosen descriptor. - * Note: the supplied function should hold all the descriptors - * for supported speeds - */ -int config_ep_by_speed(struct usb_gadget *g, - struct usb_function *f, - struct usb_ep *_ep) -{ - struct usb_composite_dev *cdev = get_gadget_data(g); - struct usb_endpoint_descriptor *chosen_desc = NULL; - struct usb_descriptor_header **speed_desc = NULL; - - struct usb_ss_ep_comp_descriptor *comp_desc = NULL; - int want_comp_desc = 0; - - struct usb_descriptor_header **d_spd; /* cursor for speed desc */ - - if (!g || !f || !_ep) - return -EIO; - - /* select desired speed */ - switch (g->speed) { - case USB_SPEED_SUPER: - if (gadget_is_superspeed(g)) { - speed_desc = f->ss_descriptors; - want_comp_desc = 1; - break; - } - /* else: Fall trough */ - case USB_SPEED_HIGH: - if (gadget_is_dualspeed(g)) { - speed_desc = f->hs_descriptors; - break; - } - /* else: fall through */ - default: - speed_desc = f->descriptors; - } - /* find descriptors */ - for_each_ep_desc(speed_desc, d_spd) { - chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; - if (chosen_desc->bEndpointAddress == _ep->address) - goto ep_found; - } - return -EIO; - -ep_found: - /* commit results */ - _ep->maxpacket = usb_endpoint_maxp(chosen_desc); - _ep->desc = chosen_desc; - _ep->comp_desc = NULL; - _ep->maxburst = 0; - _ep->mult = 0; - if (!want_comp_desc) - return 0; - - /* - * Companion descriptor should follow EP descriptor - * USB 3.0 spec, #9.6.7 - */ - comp_desc = (struct usb_ss_ep_comp_descriptor *)*(++d_spd); - if (!comp_desc || - (comp_desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP)) - return -EIO; - _ep->comp_desc = comp_desc; - if (g->speed == USB_SPEED_SUPER) { - switch (usb_endpoint_type(_ep->desc)) { - case USB_ENDPOINT_XFER_ISOC: - /* mult: bits 1:0 of bmAttributes */ - _ep->mult = comp_desc->bmAttributes & 0x3; - case USB_ENDPOINT_XFER_BULK: - case USB_ENDPOINT_XFER_INT: - _ep->maxburst = comp_desc->bMaxBurst + 1; - break; - default: - if (comp_desc->bMaxBurst != 0) - ERROR(cdev, "ep0 bMaxBurst must be 0\n"); - _ep->maxburst = 1; - break; - } - } - return 0; -} - -/** - * usb_add_function() - add a function to a configuration - * @config: the configuration - * @function: the function being added - * Context: single threaded during gadget setup - * - * After initialization, each configuration must have one or more - * functions added to it. Adding a function involves calling its @bind() - * method to allocate resources such as interface and string identifiers - * and endpoints. - * - * This function returns the value of the function's bind(), which is - * zero for success else a negative errno value. - */ -int usb_add_function(struct usb_configuration *config, - struct usb_function *function) -{ - int value = -EINVAL; - - DBG(config->cdev, "adding '%s'/%p to config '%s'/%p\n", - function->name, function, - config->label, config); - - if (!function->set_alt || !function->disable) - goto done; - - function->config = config; - list_add_tail(&function->list, &config->functions); - - /* REVISIT *require* function->bind? */ - if (function->bind) { - value = function->bind(config, function); - if (value < 0) { - list_del(&function->list); - function->config = NULL; - } - } else - value = 0; - - /* We allow configurations that don't work at both speeds. - * If we run into a lowspeed Linux system, treat it the same - * as full speed ... it's the function drivers that will need - * to avoid bulk and ISO transfers. - */ - if (!config->fullspeed && function->descriptors) - config->fullspeed = true; - if (!config->highspeed && function->hs_descriptors) - config->highspeed = true; - if (!config->superspeed && function->ss_descriptors) - config->superspeed = true; - -done: - if (value) - DBG(config->cdev, "adding '%s'/%p --> %d\n", - function->name, function, value); - return value; -} - -/** - * usb_function_deactivate - prevent function and gadget enumeration - * @function: the function that isn't yet ready to respond - * - * Blocks response of the gadget driver to host enumeration by - * preventing the data line pullup from being activated. This is - * normally called during @bind() processing to change from the - * initial "ready to respond" state, or when a required resource - * becomes available. - * - * For example, drivers that serve as a passthrough to a userspace - * daemon can block enumeration unless that daemon (such as an OBEX, - * MTP, or print server) is ready to handle host requests. - * - * Not all systems support software control of their USB peripheral - * data pullups. - * - * Returns zero on success, else negative errno. - */ -int usb_function_deactivate(struct usb_function *function) -{ - struct usb_composite_dev *cdev = function->config->cdev; - unsigned long flags; - int status = 0; - - spin_lock_irqsave(&cdev->lock, flags); - - if (cdev->deactivations == 0) - status = usb_gadget_disconnect(cdev->gadget); - if (status == 0) - cdev->deactivations++; - - spin_unlock_irqrestore(&cdev->lock, flags); - return status; -} - -/** - * usb_function_activate - allow function and gadget enumeration - * @function: function on which usb_function_activate() was called - * - * Reverses effect of usb_function_deactivate(). If no more functions - * are delaying their activation, the gadget driver will respond to - * host enumeration procedures. - * - * Returns zero on success, else negative errno. - */ -int usb_function_activate(struct usb_function *function) -{ - struct usb_composite_dev *cdev = function->config->cdev; - unsigned long flags; - int status = 0; - - spin_lock_irqsave(&cdev->lock, flags); - - if (WARN_ON(cdev->deactivations == 0)) - status = -EINVAL; - else { - cdev->deactivations--; - if (cdev->deactivations == 0) - status = usb_gadget_connect(cdev->gadget); - } - - spin_unlock_irqrestore(&cdev->lock, flags); - return status; -} - -/** - * usb_interface_id() - allocate an unused interface ID - * @config: configuration associated with the interface - * @function: function handling the interface - * Context: single threaded during gadget setup - * - * usb_interface_id() is called from usb_function.bind() callbacks to - * allocate new interface IDs. The function driver will then store that - * ID in interface, association, CDC union, and other descriptors. It - * will also handle any control requests targeted at that interface, - * particularly changing its altsetting via set_alt(). There may - * also be class-specific or vendor-specific requests to handle. - * - * All interface identifier should be allocated using this routine, to - * ensure that for example different functions don't wrongly assign - * different meanings to the same identifier. Note that since interface - * identifiers are configuration-specific, functions used in more than - * one configuration (or more than once in a given configuration) need - * multiple versions of the relevant descriptors. - * - * Returns the interface ID which was allocated; or -ENODEV if no - * more interface IDs can be allocated. - */ -int usb_interface_id(struct usb_configuration *config, - struct usb_function *function) -{ - unsigned id = config->next_interface_id; - - if (id < MAX_CONFIG_INTERFACES) { - config->interface[id] = function; - config->next_interface_id = id + 1; - return id; - } - return -ENODEV; -} - -static int config_buf(struct usb_configuration *config, - enum usb_device_speed speed, void *buf, u8 type) -{ - struct usb_config_descriptor *c = buf; - void *next = buf + USB_DT_CONFIG_SIZE; - int len = USB_BUFSIZ - USB_DT_CONFIG_SIZE; - struct usb_function *f; - int status; - - /* write the config descriptor */ - c = buf; - c->bLength = USB_DT_CONFIG_SIZE; - c->bDescriptorType = type; - /* wTotalLength is written later */ - c->bNumInterfaces = config->next_interface_id; - c->bConfigurationValue = config->bConfigurationValue; - c->iConfiguration = config->iConfiguration; - c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes; - c->bMaxPower = config->bMaxPower ? : (CONFIG_USB_GADGET_VBUS_DRAW / 2); - - /* There may be e.g. OTG descriptors */ - if (config->descriptors) { - status = usb_descriptor_fillbuf(next, len, - config->descriptors); - if (status < 0) - return status; - len -= status; - next += status; - } - - /* add each function's descriptors */ - list_for_each_entry(f, &config->functions, list) { - struct usb_descriptor_header **descriptors; - - switch (speed) { - case USB_SPEED_SUPER: - descriptors = f->ss_descriptors; - break; - case USB_SPEED_HIGH: - descriptors = f->hs_descriptors; - break; - default: - descriptors = f->descriptors; - } - - if (!descriptors) - continue; - status = usb_descriptor_fillbuf(next, len, - (const struct usb_descriptor_header **) descriptors); - if (status < 0) - return status; - len -= status; - next += status; - } - - len = next - buf; - c->wTotalLength = cpu_to_le16(len); - return len; -} - -static int config_desc(struct usb_composite_dev *cdev, unsigned w_value) -{ - struct usb_gadget *gadget = cdev->gadget; - struct usb_configuration *c; - u8 type = w_value >> 8; - enum usb_device_speed speed = USB_SPEED_UNKNOWN; - - if (gadget->speed == USB_SPEED_SUPER) - speed = gadget->speed; - else if (gadget_is_dualspeed(gadget)) { - int hs = 0; - if (gadget->speed == USB_SPEED_HIGH) - hs = 1; - if (type == USB_DT_OTHER_SPEED_CONFIG) - hs = !hs; - if (hs) - speed = USB_SPEED_HIGH; - - } - - /* This is a lookup by config *INDEX* */ - w_value &= 0xff; - list_for_each_entry(c, &cdev->configs, list) { - /* ignore configs that won't work at this speed */ - switch (speed) { - case USB_SPEED_SUPER: - if (!c->superspeed) - continue; - break; - case USB_SPEED_HIGH: - if (!c->highspeed) - continue; - break; - default: - if (!c->fullspeed) - continue; - } - - if (w_value == 0) - return config_buf(c, speed, cdev->req->buf, type); - w_value--; - } - return -EINVAL; -} - -static int count_configs(struct usb_composite_dev *cdev, unsigned type) -{ - struct usb_gadget *gadget = cdev->gadget; - struct usb_configuration *c; - unsigned count = 0; - int hs = 0; - int ss = 0; - - if (gadget_is_dualspeed(gadget)) { - if (gadget->speed == USB_SPEED_HIGH) - hs = 1; - if (gadget->speed == USB_SPEED_SUPER) - ss = 1; - if (type == USB_DT_DEVICE_QUALIFIER) - hs = !hs; - } - list_for_each_entry(c, &cdev->configs, list) { - /* ignore configs that won't work at this speed */ - if (ss) { - if (!c->superspeed) - continue; - } else if (hs) { - if (!c->highspeed) - continue; - } else { - if (!c->fullspeed) - continue; - } - count++; - } - return count; -} - -/** - * bos_desc() - prepares the BOS descriptor. - * @cdev: pointer to usb_composite device to generate the bos - * descriptor for - * - * This function generates the BOS (Binary Device Object) - * descriptor and its device capabilities descriptors. The BOS - * descriptor should be supported by a SuperSpeed device. - */ -static int bos_desc(struct usb_composite_dev *cdev) -{ - struct usb_ext_cap_descriptor *usb_ext; - struct usb_ss_cap_descriptor *ss_cap; - struct usb_dcd_config_params dcd_config_params; - struct usb_bos_descriptor *bos = cdev->req->buf; - - bos->bLength = USB_DT_BOS_SIZE; - bos->bDescriptorType = USB_DT_BOS; - - bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE); - bos->bNumDeviceCaps = 0; - - /* - * A SuperSpeed device shall include the USB2.0 extension descriptor - * and shall support LPM when operating in USB2.0 HS mode. - */ - usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength); - bos->bNumDeviceCaps++; - le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE); - usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE; - usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY; - usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT; - usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT); - - /* - * The Superspeed USB Capability descriptor shall be implemented by all - * SuperSpeed devices. - */ - ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength); - bos->bNumDeviceCaps++; - le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE); - ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE; - ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY; - ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE; - ss_cap->bmAttributes = 0; /* LTM is not supported yet */ - ss_cap->wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION | - USB_FULL_SPEED_OPERATION | - USB_HIGH_SPEED_OPERATION | - USB_5GBPS_OPERATION); - ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION; - - /* Get Controller configuration */ - if (cdev->gadget->ops->get_config_params) - cdev->gadget->ops->get_config_params(&dcd_config_params); - else { - dcd_config_params.bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT; - dcd_config_params.bU2DevExitLat = - cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT); - } - ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat; - ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat; - - return le16_to_cpu(bos->wTotalLength); -} - -static void device_qual(struct usb_composite_dev *cdev) -{ - struct usb_qualifier_descriptor *qual = cdev->req->buf; - - qual->bLength = sizeof(*qual); - qual->bDescriptorType = USB_DT_DEVICE_QUALIFIER; - /* POLICY: same bcdUSB and device type info at both speeds */ - qual->bcdUSB = cdev->desc.bcdUSB; - qual->bDeviceClass = cdev->desc.bDeviceClass; - qual->bDeviceSubClass = cdev->desc.bDeviceSubClass; - qual->bDeviceProtocol = cdev->desc.bDeviceProtocol; - /* ASSUME same EP0 fifo size at both speeds */ - qual->bMaxPacketSize0 = cdev->gadget->ep0->maxpacket; - qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER); - qual->bRESERVED = 0; -} - -/*-------------------------------------------------------------------------*/ - -static void reset_config(struct usb_composite_dev *cdev) -{ - struct usb_function *f; - - DBG(cdev, "reset config\n"); - - list_for_each_entry(f, &cdev->config->functions, list) { - if (f->disable) - f->disable(f); - - bitmap_zero(f->endpoints, 32); - } - cdev->config = NULL; -} - -static int set_config(struct usb_composite_dev *cdev, - const struct usb_ctrlrequest *ctrl, unsigned number) -{ - struct usb_gadget *gadget = cdev->gadget; - struct usb_configuration *c = NULL; - int result = -EINVAL; - unsigned power = gadget_is_otg(gadget) ? 8 : 100; - int tmp; - - if (number) { - list_for_each_entry(c, &cdev->configs, list) { - if (c->bConfigurationValue == number) { - /* - * We disable the FDs of the previous - * configuration only if the new configuration - * is a valid one - */ - if (cdev->config) - reset_config(cdev); - result = 0; - break; - } - } - if (result < 0) - goto done; - } else { /* Zero configuration value - need to reset the config */ - if (cdev->config) - reset_config(cdev); - result = 0; - } - - INFO(cdev, "%s config #%d: %s\n", - usb_speed_string(gadget->speed), - number, c ? c->label : "unconfigured"); - - if (!c) - goto done; - - cdev->config = c; - - /* Initialize all interfaces by setting them to altsetting zero. */ - for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) { - struct usb_function *f = c->interface[tmp]; - struct usb_descriptor_header **descriptors; - - if (!f) - break; - - /* - * Record which endpoints are used by the function. This is used - * to dispatch control requests targeted at that endpoint to the - * function's setup callback instead of the current - * configuration's setup callback. - */ - switch (gadget->speed) { - case USB_SPEED_SUPER: - descriptors = f->ss_descriptors; - break; - case USB_SPEED_HIGH: - descriptors = f->hs_descriptors; - break; - default: - descriptors = f->descriptors; - } - - for (; *descriptors; ++descriptors) { - struct usb_endpoint_descriptor *ep; - int addr; - - if ((*descriptors)->bDescriptorType != USB_DT_ENDPOINT) - continue; - - ep = (struct usb_endpoint_descriptor *)*descriptors; - addr = ((ep->bEndpointAddress & 0x80) >> 3) - | (ep->bEndpointAddress & 0x0f); - set_bit(addr, f->endpoints); - } - - result = f->set_alt(f, tmp, 0); - if (result < 0) { - DBG(cdev, "interface %d (%s/%p) alt 0 --> %d\n", - tmp, f->name, f, result); - - reset_config(cdev); - goto done; - } - - if (result == USB_GADGET_DELAYED_STATUS) { - DBG(cdev, - "%s: interface %d (%s) requested delayed status\n", - __func__, tmp, f->name); - cdev->delayed_status++; - DBG(cdev, "delayed_status count %d\n", - cdev->delayed_status); - } - } - - /* when we return, be sure our power usage is valid */ - power = c->bMaxPower ? (2 * c->bMaxPower) : CONFIG_USB_GADGET_VBUS_DRAW; -done: - usb_gadget_vbus_draw(gadget, power); - if (result >= 0 && cdev->delayed_status) - result = USB_GADGET_DELAYED_STATUS; - return result; -} - -/** - * usb_add_config() - add a configuration to a device. - * @cdev: wraps the USB gadget - * @config: the configuration, with bConfigurationValue assigned - * @bind: the configuration's bind function - * Context: single threaded during gadget setup - * - * One of the main tasks of a composite @bind() routine is to - * add each of the configurations it supports, using this routine. - * - * This function returns the value of the configuration's @bind(), which - * is zero for success else a negative errno value. Binding configurations - * assigns global resources including string IDs, and per-configuration - * resources such as interface IDs and endpoints. - */ -int usb_add_config(struct usb_composite_dev *cdev, - struct usb_configuration *config, - int (*bind)(struct usb_configuration *)) -{ - int status = -EINVAL; - struct usb_configuration *c; - - DBG(cdev, "adding config #%u '%s'/%p\n", - config->bConfigurationValue, - config->label, config); - - if (!config->bConfigurationValue || !bind) - goto done; - - /* Prevent duplicate configuration identifiers */ - list_for_each_entry(c, &cdev->configs, list) { - if (c->bConfigurationValue == config->bConfigurationValue) { - status = -EBUSY; - goto done; - } - } - - config->cdev = cdev; - list_add_tail(&config->list, &cdev->configs); - - INIT_LIST_HEAD(&config->functions); - config->next_interface_id = 0; - memset(config->interface, 0, sizeof(config->interface)); - - status = bind(config); - if (status < 0) { - while (!list_empty(&config->functions)) { - struct usb_function *f; - - f = list_first_entry(&config->functions, - struct usb_function, list); - list_del(&f->list); - if (f->unbind) { - DBG(cdev, "unbind function '%s'/%p\n", - f->name, f); - f->unbind(config, f); - /* may free memory for "f" */ - } - } - list_del(&config->list); - config->cdev = NULL; - } else { - unsigned i; - - DBG(cdev, "cfg %d/%p speeds:%s%s%s\n", - config->bConfigurationValue, config, - config->superspeed ? " super" : "", - config->highspeed ? " high" : "", - config->fullspeed - ? (gadget_is_dualspeed(cdev->gadget) - ? " full" - : " full/low") - : ""); - - for (i = 0; i < MAX_CONFIG_INTERFACES; i++) { - struct usb_function *f = config->interface[i]; - - if (!f) - continue; - DBG(cdev, " interface %d = %s/%p\n", - i, f->name, f); - } - } - - /* set_alt(), or next bind(), sets up - * ep->driver_data as needed. - */ - usb_ep_autoconfig_reset(cdev->gadget); - -done: - if (status) - DBG(cdev, "added config '%s'/%u --> %d\n", config->label, - config->bConfigurationValue, status); - return status; -} - -static void remove_config(struct usb_composite_dev *cdev, - struct usb_configuration *config) -{ - while (!list_empty(&config->functions)) { - struct usb_function *f; - - f = list_first_entry(&config->functions, - struct usb_function, list); - list_del(&f->list); - if (f->unbind) { - DBG(cdev, "unbind function '%s'/%p\n", f->name, f); - f->unbind(config, f); - /* may free memory for "f" */ - } - } - list_del(&config->list); - if (config->unbind) { - DBG(cdev, "unbind config '%s'/%p\n", config->label, config); - config->unbind(config); - /* may free memory for "c" */ - } -} - -/** - * usb_remove_config() - remove a configuration from a device. - * @cdev: wraps the USB gadget - * @config: the configuration - * - * Drivers must call usb_gadget_disconnect before calling this function - * to disconnect the device from the host and make sure the host will not - * try to enumerate the device while we are changing the config list. - */ -void usb_remove_config(struct usb_composite_dev *cdev, - struct usb_configuration *config) -{ - unsigned long flags; - - spin_lock_irqsave(&cdev->lock, flags); - - if (cdev->config == config) - reset_config(cdev); - - spin_unlock_irqrestore(&cdev->lock, flags); - - remove_config(cdev, config); -} - -/*-------------------------------------------------------------------------*/ - -/* We support strings in multiple languages ... string descriptor zero - * says which languages are supported. The typical case will be that - * only one language (probably English) is used, with I18N handled on - * the host side. - */ - -static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf) -{ - const struct usb_gadget_strings *s; - __le16 language; - __le16 *tmp; - - while (*sp) { - s = *sp; - language = cpu_to_le16(s->language); - for (tmp = buf; *tmp && tmp < &buf[126]; tmp++) { - if (*tmp == language) - goto repeat; - } - *tmp++ = language; -repeat: - sp++; - } -} - -static int lookup_string( - struct usb_gadget_strings **sp, - void *buf, - u16 language, - int id -) -{ - struct usb_gadget_strings *s; - int value; - - while (*sp) { - s = *sp++; - if (s->language != language) - continue; - value = usb_gadget_get_string(s, id, buf); - if (value > 0) - return value; - } - return -EINVAL; -} - -static int get_string(struct usb_composite_dev *cdev, - void *buf, u16 language, int id) -{ - struct usb_configuration *c; - struct usb_function *f; - int len; - const char *str; - - /* Yes, not only is USB's I18N support probably more than most - * folk will ever care about ... also, it's all supported here. - * (Except for UTF8 support for Unicode's "Astral Planes".) - */ - - /* 0 == report all available language codes */ - if (id == 0) { - struct usb_string_descriptor *s = buf; - struct usb_gadget_strings **sp; - - memset(s, 0, 256); - s->bDescriptorType = USB_DT_STRING; - - sp = composite->strings; - if (sp) - collect_langs(sp, s->wData); - - list_for_each_entry(c, &cdev->configs, list) { - sp = c->strings; - if (sp) - collect_langs(sp, s->wData); - - list_for_each_entry(f, &c->functions, list) { - sp = f->strings; - if (sp) - collect_langs(sp, s->wData); - } - } - - for (len = 0; len <= 126 && s->wData[len]; len++) - continue; - if (!len) - return -EINVAL; - - s->bLength = 2 * (len + 1); - return s->bLength; - } - - /* Otherwise, look up and return a specified string. First - * check if the string has not been overridden. - */ - if (cdev->manufacturer_override == id) - str = iManufacturer ?: composite->iManufacturer ?: - composite_manufacturer; - else if (cdev->product_override == id) - str = iProduct ?: composite->iProduct; - else if (cdev->serial_override == id) - str = iSerialNumber ?: composite->iSerialNumber; - else - str = NULL; - if (str) { - struct usb_gadget_strings strings = { - .language = language, - .strings = &(struct usb_string) { 0xff, str } - }; - return usb_gadget_get_string(&strings, 0xff, buf); - } - - /* String IDs are device-scoped, so we look up each string - * table we're told about. These lookups are infrequent; - * simpler-is-better here. - */ - if (composite->strings) { - len = lookup_string(composite->strings, buf, language, id); - if (len > 0) - return len; - } - list_for_each_entry(c, &cdev->configs, list) { - if (c->strings) { - len = lookup_string(c->strings, buf, language, id); - if (len > 0) - return len; - } - list_for_each_entry(f, &c->functions, list) { - if (!f->strings) - continue; - len = lookup_string(f->strings, buf, language, id); - if (len > 0) - return len; - } - } - return -EINVAL; -} - -/** - * usb_string_id() - allocate an unused string ID - * @cdev: the device whose string descriptor IDs are being allocated - * Context: single threaded during gadget setup - * - * @usb_string_id() is called from bind() callbacks to allocate - * string IDs. Drivers for functions, configurations, or gadgets will - * then store that ID in the appropriate descriptors and string table. - * - * All string identifier should be allocated using this, - * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure - * that for example different functions don't wrongly assign different - * meanings to the same identifier. - */ -int usb_string_id(struct usb_composite_dev *cdev) -{ - if (cdev->next_string_id < 254) { - /* string id 0 is reserved by USB spec for list of - * supported languages */ - /* 255 reserved as well? -- mina86 */ - cdev->next_string_id++; - return cdev->next_string_id; - } - return -ENODEV; -} - -/** - * usb_string_ids() - allocate unused string IDs in batch - * @cdev: the device whose string descriptor IDs are being allocated - * @str: an array of usb_string objects to assign numbers to - * Context: single threaded during gadget setup - * - * @usb_string_ids() is called from bind() callbacks to allocate - * string IDs. Drivers for functions, configurations, or gadgets will - * then copy IDs from the string table to the appropriate descriptors - * and string table for other languages. - * - * All string identifier should be allocated using this, - * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for - * example different functions don't wrongly assign different meanings - * to the same identifier. - */ -int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str) -{ - int next = cdev->next_string_id; - - for (; str->s; ++str) { - if (unlikely(next >= 254)) - return -ENODEV; - str->id = ++next; - } - - cdev->next_string_id = next; - - return 0; -} - -/** - * usb_string_ids_n() - allocate unused string IDs in batch - * @c: the device whose string descriptor IDs are being allocated - * @n: number of string IDs to allocate - * Context: single threaded during gadget setup - * - * Returns the first requested ID. This ID and next @n-1 IDs are now - * valid IDs. At least provided that @n is non-zero because if it - * is, returns last requested ID which is now very useful information. - * - * @usb_string_ids_n() is called from bind() callbacks to allocate - * string IDs. Drivers for functions, configurations, or gadgets will - * then store that ID in the appropriate descriptors and string table. - * - * All string identifier should be allocated using this, - * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for - * example different functions don't wrongly assign different meanings - * to the same identifier. - */ -int usb_string_ids_n(struct usb_composite_dev *c, unsigned n) -{ - unsigned next = c->next_string_id; - if (unlikely(n > 254 || (unsigned)next + n > 254)) - return -ENODEV; - c->next_string_id += n; - return next + 1; -} - - -/*-------------------------------------------------------------------------*/ - -static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req) -{ - if (req->status || req->actual != req->length) - DBG((struct usb_composite_dev *) ep->driver_data, - "setup complete --> %d, %d/%d\n", - req->status, req->actual, req->length); -} - -/* - * The setup() callback implements all the ep0 functionality that's - * not handled lower down, in hardware or the hardware driver(like - * device and endpoint feature flags, and their status). It's all - * housekeeping for the gadget function we're implementing. Most of - * the work is in config and function specific setup. - */ -static int -composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) -{ - struct usb_composite_dev *cdev = get_gadget_data(gadget); - struct usb_request *req = cdev->req; - int value = -EOPNOTSUPP; - int status = 0; - u16 w_index = le16_to_cpu(ctrl->wIndex); - u8 intf = w_index & 0xFF; - u16 w_value = le16_to_cpu(ctrl->wValue); - u16 w_length = le16_to_cpu(ctrl->wLength); - struct usb_function *f = NULL; - u8 endp; - - /* partial re-init of the response message; the function or the - * gadget might need to intercept e.g. a control-OUT completion - * when we delegate to it. - */ - req->zero = 0; - req->complete = composite_setup_complete; - req->length = 0; - gadget->ep0->driver_data = cdev; - - switch (ctrl->bRequest) { - - /* we handle all standard USB descriptors */ - case USB_REQ_GET_DESCRIPTOR: - if (ctrl->bRequestType != USB_DIR_IN) - goto unknown; - switch (w_value >> 8) { - - case USB_DT_DEVICE: - cdev->desc.bNumConfigurations = - count_configs(cdev, USB_DT_DEVICE); - cdev->desc.bMaxPacketSize0 = - cdev->gadget->ep0->maxpacket; - if (gadget_is_superspeed(gadget)) { - if (gadget->speed >= USB_SPEED_SUPER) { - cdev->desc.bcdUSB = cpu_to_le16(0x0300); - cdev->desc.bMaxPacketSize0 = 9; - } else { - cdev->desc.bcdUSB = cpu_to_le16(0x0210); - } - } - - value = min(w_length, (u16) sizeof cdev->desc); - memcpy(req->buf, &cdev->desc, value); - break; - case USB_DT_DEVICE_QUALIFIER: - if (!gadget_is_dualspeed(gadget) || - gadget->speed >= USB_SPEED_SUPER) - break; - device_qual(cdev); - value = min_t(int, w_length, - sizeof(struct usb_qualifier_descriptor)); - break; - case USB_DT_OTHER_SPEED_CONFIG: - if (!gadget_is_dualspeed(gadget) || - gadget->speed >= USB_SPEED_SUPER) - break; - /* FALLTHROUGH */ - case USB_DT_CONFIG: - value = config_desc(cdev, w_value); - if (value >= 0) - value = min(w_length, (u16) value); - break; - case USB_DT_STRING: - value = get_string(cdev, req->buf, - w_index, w_value & 0xff); - if (value >= 0) - value = min(w_length, (u16) value); - break; - case USB_DT_BOS: - if (gadget_is_superspeed(gadget)) { - value = bos_desc(cdev); - value = min(w_length, (u16) value); - } - break; - } - break; - - /* any number of configs can work */ - case USB_REQ_SET_CONFIGURATION: - if (ctrl->bRequestType != 0) - goto unknown; - if (gadget_is_otg(gadget)) { - if (gadget->a_hnp_support) - DBG(cdev, "HNP available\n"); - else if (gadget->a_alt_hnp_support) - DBG(cdev, "HNP on another port\n"); - else - VDBG(cdev, "HNP inactive\n"); - } - spin_lock(&cdev->lock); - value = set_config(cdev, ctrl, w_value); - spin_unlock(&cdev->lock); - break; - case USB_REQ_GET_CONFIGURATION: - if (ctrl->bRequestType != USB_DIR_IN) - goto unknown; - if (cdev->config) - *(u8 *)req->buf = cdev->config->bConfigurationValue; - else - *(u8 *)req->buf = 0; - value = min(w_length, (u16) 1); - break; - - /* function drivers must handle get/set altsetting; if there's - * no get() method, we know only altsetting zero works. - */ - case USB_REQ_SET_INTERFACE: - if (ctrl->bRequestType != USB_RECIP_INTERFACE) - goto unknown; - if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) - break; - f = cdev->config->interface[intf]; - if (!f) - break; - if (w_value && !f->set_alt) - break; - value = f->set_alt(f, w_index, w_value); - if (value == USB_GADGET_DELAYED_STATUS) { - DBG(cdev, - "%s: interface %d (%s) requested delayed status\n", - __func__, intf, f->name); - cdev->delayed_status++; - DBG(cdev, "delayed_status count %d\n", - cdev->delayed_status); - } - break; - case USB_REQ_GET_INTERFACE: - if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) - goto unknown; - if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) - break; - f = cdev->config->interface[intf]; - if (!f) - break; - /* lots of interfaces only need altsetting zero... */ - value = f->get_alt ? f->get_alt(f, w_index) : 0; - if (value < 0) - break; - *((u8 *)req->buf) = value; - value = min(w_length, (u16) 1); - break; - - /* - * USB 3.0 additions: - * Function driver should handle get_status request. If such cb - * wasn't supplied we respond with default value = 0 - * Note: function driver should supply such cb only for the first - * interface of the function - */ - case USB_REQ_GET_STATUS: - if (!gadget_is_superspeed(gadget)) - goto unknown; - if (ctrl->bRequestType != (USB_DIR_IN | USB_RECIP_INTERFACE)) - goto unknown; - value = 2; /* This is the length of the get_status reply */ - put_unaligned_le16(0, req->buf); - if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) - break; - f = cdev->config->interface[intf]; - if (!f) - break; - status = f->get_status ? f->get_status(f) : 0; - if (status < 0) - break; - put_unaligned_le16(status & 0x0000ffff, req->buf); - break; - /* - * Function drivers should handle SetFeature/ClearFeature - * (FUNCTION_SUSPEND) request. function_suspend cb should be supplied - * only for the first interface of the function - */ - case USB_REQ_CLEAR_FEATURE: - case USB_REQ_SET_FEATURE: - if (!gadget_is_superspeed(gadget)) - goto unknown; - if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_INTERFACE)) - goto unknown; - switch (w_value) { - case USB_INTRF_FUNC_SUSPEND: - if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) - break; - f = cdev->config->interface[intf]; - if (!f) - break; - value = 0; - if (f->func_suspend) - value = f->func_suspend(f, w_index >> 8); - if (value < 0) { - ERROR(cdev, - "func_suspend() returned error %d\n", - value); - value = 0; - } - break; - } - break; - default: -unknown: - VDBG(cdev, - "non-core control req%02x.%02x v%04x i%04x l%d\n", - ctrl->bRequestType, ctrl->bRequest, - w_value, w_index, w_length); - - /* functions always handle their interfaces and endpoints... - * punt other recipients (other, WUSB, ...) to the current - * configuration code. - * - * REVISIT it could make sense to let the composite device - * take such requests too, if that's ever needed: to work - * in config 0, etc. - */ - switch (ctrl->bRequestType & USB_RECIP_MASK) { - case USB_RECIP_INTERFACE: - if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) - break; - f = cdev->config->interface[intf]; - break; - - case USB_RECIP_ENDPOINT: - endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f); - list_for_each_entry(f, &cdev->config->functions, list) { - if (test_bit(endp, f->endpoints)) - break; - } - if (&f->list == &cdev->config->functions) - f = NULL; - break; - } - - if (f && f->setup) - value = f->setup(f, ctrl); - else { - struct usb_configuration *c; - - c = cdev->config; - if (c && c->setup) - value = c->setup(c, ctrl); - } - - goto done; - } - - /* respond with data transfer before status phase? */ - if (value >= 0 && value != USB_GADGET_DELAYED_STATUS) { - req->length = value; - req->zero = value < w_length; - value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); - if (value < 0) { - DBG(cdev, "ep_queue --> %d\n", value); - req->status = 0; - composite_setup_complete(gadget->ep0, req); - } - } else if (value == USB_GADGET_DELAYED_STATUS && w_length != 0) { - WARN(cdev, - "%s: Delayed status not supported for w_length != 0", - __func__); - } - -done: - /* device either stalls (value < 0) or reports success */ - return value; -} - -static void composite_disconnect(struct usb_gadget *gadget) -{ - struct usb_composite_dev *cdev = get_gadget_data(gadget); - unsigned long flags; - - /* REVISIT: should we have config and device level - * disconnect callbacks? - */ - spin_lock_irqsave(&cdev->lock, flags); - if (cdev->config) - reset_config(cdev); - if (composite->disconnect) - composite->disconnect(cdev); - spin_unlock_irqrestore(&cdev->lock, flags); -} - -/*-------------------------------------------------------------------------*/ - -static ssize_t composite_show_suspended(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct usb_gadget *gadget = dev_to_usb_gadget(dev); - struct usb_composite_dev *cdev = get_gadget_data(gadget); - - return sprintf(buf, "%d\n", cdev->suspended); -} - -static DEVICE_ATTR(suspended, 0444, composite_show_suspended, NULL); - -static void -composite_unbind(struct usb_gadget *gadget) -{ - struct usb_composite_dev *cdev = get_gadget_data(gadget); - - /* composite_disconnect() must already have been called - * by the underlying peripheral controller driver! - * so there's no i/o concurrency that could affect the - * state protected by cdev->lock. - */ - WARN_ON(cdev->config); - - while (!list_empty(&cdev->configs)) { - struct usb_configuration *c; - c = list_first_entry(&cdev->configs, - struct usb_configuration, list); - remove_config(cdev, c); - } - if (composite->unbind) - composite->unbind(cdev); - - if (cdev->req) { - kfree(cdev->req->buf); - usb_ep_free_request(gadget->ep0, cdev->req); - } - device_remove_file(&gadget->dev, &dev_attr_suspended); - kfree(cdev); - set_gadget_data(gadget, NULL); - composite = NULL; -} - -static u8 override_id(struct usb_composite_dev *cdev, u8 *desc) -{ - if (!*desc) { - int ret = usb_string_id(cdev); - if (unlikely(ret < 0)) - WARNING(cdev, "failed to override string ID\n"); - else - *desc = ret; - } - - return *desc; -} - -static int composite_bind(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) -{ - struct usb_composite_dev *cdev; - int status = -ENOMEM; - - cdev = kzalloc(sizeof *cdev, GFP_KERNEL); - if (!cdev) - return status; - - spin_lock_init(&cdev->lock); - cdev->gadget = gadget; - set_gadget_data(gadget, cdev); - INIT_LIST_HEAD(&cdev->configs); - - /* preallocate control response and buffer */ - cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); - if (!cdev->req) - goto fail; - cdev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL); - if (!cdev->req->buf) - goto fail; - cdev->req->complete = composite_setup_complete; - gadget->ep0->driver_data = cdev; - - cdev->bufsiz = USB_BUFSIZ; - cdev->driver = composite; - - /* - * As per USB compliance update, a device that is actively drawing - * more than 100mA from USB must report itself as bus-powered in - * the GetStatus(DEVICE) call. - */ - if (CONFIG_USB_GADGET_VBUS_DRAW <= USB_SELF_POWER_VBUS_MAX_DRAW) - usb_gadget_set_selfpowered(gadget); - - /* interface and string IDs start at zero via kzalloc. - * we force endpoints to start unassigned; few controller - * drivers will zero ep->driver_data. - */ - usb_ep_autoconfig_reset(cdev->gadget); - - /* composite gadget needs to assign strings for whole device (like - * serial number), register function drivers, potentially update - * power state and consumption, etc - */ - status = composite->bind(cdev); - if (status < 0) - goto fail; - - cdev->desc = *composite->dev; - - /* standardized runtime overrides for device ID data */ - if (idVendor) - cdev->desc.idVendor = cpu_to_le16(idVendor); - else - idVendor = le16_to_cpu(cdev->desc.idVendor); - if (idProduct) - cdev->desc.idProduct = cpu_to_le16(idProduct); - else - idProduct = le16_to_cpu(cdev->desc.idProduct); - if (bcdDevice) - cdev->desc.bcdDevice = cpu_to_le16(bcdDevice); - else - bcdDevice = le16_to_cpu(cdev->desc.bcdDevice); - - /* string overrides */ - if (iManufacturer || !cdev->desc.iManufacturer) { - if (!iManufacturer && !composite->iManufacturer && - !*composite_manufacturer) - snprintf(composite_manufacturer, - sizeof composite_manufacturer, - "%s %s with %s", - init_utsname()->sysname, - init_utsname()->release, - gadget->name); - - cdev->manufacturer_override = - override_id(cdev, &cdev->desc.iManufacturer); - } - - if (iProduct || (!cdev->desc.iProduct && composite->iProduct)) - cdev->product_override = - override_id(cdev, &cdev->desc.iProduct); - - if (iSerialNumber || - (!cdev->desc.iSerialNumber && composite->iSerialNumber)) - cdev->serial_override = - override_id(cdev, &cdev->desc.iSerialNumber); - - /* has userspace failed to provide a serial number? */ - if (composite->needs_serial && !cdev->desc.iSerialNumber) - WARNING(cdev, "userspace failed to provide iSerialNumber\n"); - - /* finish up */ - status = device_create_file(&gadget->dev, &dev_attr_suspended); - if (status) - goto fail; - - INFO(cdev, "%s ready\n", composite->name); - return 0; - -fail: - composite_unbind(gadget); - return status; -} - -/*-------------------------------------------------------------------------*/ - -static void -composite_suspend(struct usb_gadget *gadget) -{ - struct usb_composite_dev *cdev = get_gadget_data(gadget); - struct usb_function *f; - - /* REVISIT: should we have config level - * suspend/resume callbacks? - */ - DBG(cdev, "suspend\n"); - if (cdev->config) { - list_for_each_entry(f, &cdev->config->functions, list) { - if (f->suspend) - f->suspend(f); - } - } - if (composite->suspend) - composite->suspend(cdev); - - cdev->suspended = 1; - - usb_gadget_vbus_draw(gadget, 2); -} - -static void -composite_resume(struct usb_gadget *gadget) -{ - struct usb_composite_dev *cdev = get_gadget_data(gadget); - struct usb_function *f; - u8 maxpower; - - /* REVISIT: should we have config level - * suspend/resume callbacks? - */ - DBG(cdev, "resume\n"); - if (composite->resume) - composite->resume(cdev); - if (cdev->config) { - list_for_each_entry(f, &cdev->config->functions, list) { - if (f->resume) - f->resume(f); - } - - maxpower = cdev->config->bMaxPower; - - usb_gadget_vbus_draw(gadget, maxpower ? - (2 * maxpower) : CONFIG_USB_GADGET_VBUS_DRAW); - } - - cdev->suspended = 0; -} - -/*-------------------------------------------------------------------------*/ - -static struct usb_gadget_driver composite_driver = { - .bind = composite_bind, - .unbind = composite_unbind, - - .setup = composite_setup, - .disconnect = composite_disconnect, - - .suspend = composite_suspend, - .resume = composite_resume, - - .driver = { - .owner = THIS_MODULE, - }, -}; - -/** - * usb_composite_probe() - register a composite driver - * @driver: the driver to register - * @bind: the callback used to allocate resources that are shared across the - * whole device, such as string IDs, and add its configurations using - * @usb_add_config(). This may fail by returning a negative errno - * value; it should return zero on successful initialization. - * Context: single threaded during gadget setup - * - * This function is used to register drivers using the composite driver - * framework. The return value is zero, or a negative errno value. - * Those values normally come from the driver's @bind method, which does - * all the work of setting up the driver to match the hardware. - * - * On successful return, the gadget is ready to respond to requests from - * the host, unless one of its components invokes usb_gadget_disconnect() - * while it was binding. That would usually be done in order to wait for - * some userspace participation. - */ -int usb_composite_probe(struct usb_composite_driver *driver) -{ - if (!driver || !driver->dev || composite || !driver->bind) - return -EINVAL; - - if (!driver->name) - driver->name = "composite"; - if (!driver->iProduct) - driver->iProduct = driver->name; - composite_driver.function = (char *) driver->name; - composite_driver.driver.name = driver->name; - composite_driver.max_speed = driver->max_speed; - composite = driver; - - return usb_gadget_probe_driver(&composite_driver); -} - -/** - * usb_composite_unregister() - unregister a composite driver - * @driver: the driver to unregister - * - * This function is used to unregister drivers using the composite - * driver framework. - */ -void usb_composite_unregister(struct usb_composite_driver *driver) -{ - if (composite != driver) - return; - usb_gadget_unregister_driver(&composite_driver); -} - -/** - * usb_composite_setup_continue() - Continue with the control transfer - * @cdev: the composite device who's control transfer was kept waiting - * - * This function must be called by the USB function driver to continue - * with the control transfer's data/status stage in case it had requested to - * delay the data/status stages. A USB function's setup handler (e.g. set_alt()) - * can request the composite framework to delay the setup request's data/status - * stages by returning USB_GADGET_DELAYED_STATUS. - */ -void usb_composite_setup_continue(struct usb_composite_dev *cdev) -{ - int value; - struct usb_request *req = cdev->req; - unsigned long flags; - - DBG(cdev, "%s\n", __func__); - spin_lock_irqsave(&cdev->lock, flags); - - if (cdev->delayed_status == 0) { - WARN(cdev, "%s: Unexpected call\n", __func__); - - } else if (--cdev->delayed_status == 0) { - DBG(cdev, "%s: Completing delayed status\n", __func__); - req->length = 0; - value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); - if (value < 0) { - DBG(cdev, "ep_queue --> %d\n", value); - req->status = 0; - composite_setup_complete(cdev->gadget->ep0, req); - } - } - - spin_unlock_irqrestore(&cdev->lock, flags); -} - diff --git a/drivers/staging/ccg/composite.h b/drivers/staging/ccg/composite.h deleted file mode 100644 index 19a5adf18bf..00000000000 --- a/drivers/staging/ccg/composite.h +++ /dev/null @@ -1,395 +0,0 @@ -/* - * composite.h -- framework for usb gadgets which are composite devices - * - * Copyright (C) 2006-2008 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef __LINUX_USB_COMPOSITE_H -#define __LINUX_USB_COMPOSITE_H - -/* - * This framework is an optional layer on top of the USB Gadget interface, - * making it easier to build (a) Composite devices, supporting multiple - * functions within any single configuration, and (b) Multi-configuration - * devices, also supporting multiple functions but without necessarily - * having more than one function per configuration. - * - * Example: a device with a single configuration supporting both network - * link and mass storage functions is a composite device. Those functions - * might alternatively be packaged in individual configurations, but in - * the composite model the host can use both functions at the same time. - */ - -#include -#include - -/* - * USB function drivers should return USB_GADGET_DELAYED_STATUS if they - * wish to delay the data/status stages of the control transfer till they - * are ready. The control transfer will then be kept from completing till - * all the function drivers that requested for USB_GADGET_DELAYED_STAUS - * invoke usb_composite_setup_continue(). - */ -#define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */ - -struct usb_configuration; - -/** - * struct usb_function - describes one function of a configuration - * @name: For diagnostics, identifies the function. - * @strings: tables of strings, keyed by identifiers assigned during bind() - * and by language IDs provided in control requests - * @descriptors: Table of full (or low) speed descriptors, using interface and - * string identifiers assigned during @bind(). If this pointer is null, - * the function will not be available at full speed (or at low speed). - * @hs_descriptors: Table of high speed descriptors, using interface and - * string identifiers assigned during @bind(). If this pointer is null, - * the function will not be available at high speed. - * @ss_descriptors: Table of super speed descriptors, using interface and - * string identifiers assigned during @bind(). If this - * pointer is null after initiation, the function will not - * be available at super speed. - * @config: assigned when @usb_add_function() is called; this is the - * configuration with which this function is associated. - * @bind: Before the gadget can register, all of its functions bind() to the - * available resources including string and interface identifiers used - * in interface or class descriptors; endpoints; I/O buffers; and so on. - * @unbind: Reverses @bind; called as a side effect of unregistering the - * driver which added this function. - * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may - * initialize usb_ep.driver data at this time (when it is used). - * Note that setting an interface to its current altsetting resets - * interface state, and that all interfaces have a disabled state. - * @get_alt: Returns the active altsetting. If this is not provided, - * then only altsetting zero is supported. - * @disable: (REQUIRED) Indicates the function should be disabled. Reasons - * include host resetting or reconfiguring the gadget, and disconnection. - * @setup: Used for interface-specific control requests. - * @suspend: Notifies functions when the host stops sending USB traffic. - * @resume: Notifies functions when the host restarts USB traffic. - * @get_status: Returns function status as a reply to - * GetStatus() request when the recepient is Interface. - * @func_suspend: callback to be called when - * SetFeature(FUNCTION_SUSPEND) is reseived - * - * A single USB function uses one or more interfaces, and should in most - * cases support operation at both full and high speeds. Each function is - * associated by @usb_add_function() with a one configuration; that function - * causes @bind() to be called so resources can be allocated as part of - * setting up a gadget driver. Those resources include endpoints, which - * should be allocated using @usb_ep_autoconfig(). - * - * To support dual speed operation, a function driver provides descriptors - * for both high and full speed operation. Except in rare cases that don't - * involve bulk endpoints, each speed needs different endpoint descriptors. - * - * Function drivers choose their own strategies for managing instance data. - * The simplest strategy just declares it "static', which means the function - * can only be activated once. If the function needs to be exposed in more - * than one configuration at a given speed, it needs to support multiple - * usb_function structures (one for each configuration). - * - * A more complex strategy might encapsulate a @usb_function structure inside - * a driver-specific instance structure to allows multiple activations. An - * example of multiple activations might be a CDC ACM function that supports - * two or more distinct instances within the same configuration, providing - * several independent logical data links to a USB host. - */ -struct usb_function { - const char *name; - struct usb_gadget_strings **strings; - struct usb_descriptor_header **descriptors; - struct usb_descriptor_header **hs_descriptors; - struct usb_descriptor_header **ss_descriptors; - - struct usb_configuration *config; - - /* REVISIT: bind() functions can be marked __init, which - * makes trouble for section mismatch analysis. See if - * we can't restructure things to avoid mismatching. - * Related: unbind() may kfree() but bind() won't... - */ - - /* configuration management: bind/unbind */ - int (*bind)(struct usb_configuration *, - struct usb_function *); - void (*unbind)(struct usb_configuration *, - struct usb_function *); - - /* runtime state management */ - int (*set_alt)(struct usb_function *, - unsigned interface, unsigned alt); - int (*get_alt)(struct usb_function *, - unsigned interface); - void (*disable)(struct usb_function *); - int (*setup)(struct usb_function *, - const struct usb_ctrlrequest *); - void (*suspend)(struct usb_function *); - void (*resume)(struct usb_function *); - - /* USB 3.0 additions */ - int (*get_status)(struct usb_function *); - int (*func_suspend)(struct usb_function *, - u8 suspend_opt); - /* private: */ - /* internals */ - struct list_head list; - DECLARE_BITMAP(endpoints, 32); -}; - -int usb_add_function(struct usb_configuration *, struct usb_function *); - -int usb_function_deactivate(struct usb_function *); -int usb_function_activate(struct usb_function *); - -int usb_interface_id(struct usb_configuration *, struct usb_function *); - -int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f, - struct usb_ep *_ep); - -#define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */ - -/** - * struct usb_configuration - represents one gadget configuration - * @label: For diagnostics, describes the configuration. - * @strings: Tables of strings, keyed by identifiers assigned during @bind() - * and by language IDs provided in control requests. - * @descriptors: Table of descriptors preceding all function descriptors. - * Examples include OTG and vendor-specific descriptors. - * @unbind: Reverses @bind; called as a side effect of unregistering the - * driver which added this configuration. - * @setup: Used to delegate control requests that aren't handled by standard - * device infrastructure or directed at a specific interface. - * @bConfigurationValue: Copied into configuration descriptor. - * @iConfiguration: Copied into configuration descriptor. - * @bmAttributes: Copied into configuration descriptor. - * @bMaxPower: Copied into configuration descriptor. - * @cdev: assigned by @usb_add_config() before calling @bind(); this is - * the device associated with this configuration. - * - * Configurations are building blocks for gadget drivers structured around - * function drivers. Simple USB gadgets require only one function and one - * configuration, and handle dual-speed hardware by always providing the same - * functionality. Slightly more complex gadgets may have more than one - * single-function configuration at a given speed; or have configurations - * that only work at one speed. - * - * Composite devices are, by definition, ones with configurations which - * include more than one function. - * - * The lifecycle of a usb_configuration includes allocation, initialization - * of the fields described above, and calling @usb_add_config() to set up - * internal data and bind it to a specific device. The configuration's - * @bind() method is then used to initialize all the functions and then - * call @usb_add_function() for them. - * - * Those functions would normally be independent of each other, but that's - * not mandatory. CDC WMC devices are an example where functions often - * depend on other functions, with some functions subsidiary to others. - * Such interdependency may be managed in any way, so long as all of the - * descriptors complete by the time the composite driver returns from - * its bind() routine. - */ -struct usb_configuration { - const char *label; - struct usb_gadget_strings **strings; - const struct usb_descriptor_header **descriptors; - - /* REVISIT: bind() functions can be marked __init, which - * makes trouble for section mismatch analysis. See if - * we can't restructure things to avoid mismatching... - */ - - /* configuration management: unbind/setup */ - void (*unbind)(struct usb_configuration *); - int (*setup)(struct usb_configuration *, - const struct usb_ctrlrequest *); - - /* fields in the config descriptor */ - u8 bConfigurationValue; - u8 iConfiguration; - u8 bmAttributes; - u8 bMaxPower; - - struct usb_composite_dev *cdev; - - /* private: */ - /* internals */ - struct list_head list; - struct list_head functions; - u8 next_interface_id; - unsigned superspeed:1; - unsigned highspeed:1; - unsigned fullspeed:1; - struct usb_function *interface[MAX_CONFIG_INTERFACES]; -}; - -int usb_add_config(struct usb_composite_dev *, - struct usb_configuration *, - int (*)(struct usb_configuration *)); - -void usb_remove_config(struct usb_composite_dev *, - struct usb_configuration *); - -/** - * struct usb_composite_driver - groups configurations into a gadget - * @name: For diagnostics, identifies the driver. - * @iProduct: Used as iProduct override if @dev->iProduct is not set. - * If NULL value of @name is taken. - * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is - * not set. If NULL a default " with " value - * will be used. - * @iSerialNumber: Used as iSerialNumber override if @dev->iSerialNumber is - * not set. - * @dev: Template descriptor for the device, including default device - * identifiers. - * @strings: tables of strings, keyed by identifiers assigned during @bind - * and language IDs provided in control requests - * @max_speed: Highest speed the driver supports. - * @needs_serial: set to 1 if the gadget needs userspace to provide - * a serial number. If one is not provided, warning will be printed. - * @bind: (REQUIRED) Used to allocate resources that are shared across the - * whole device, such as string IDs, and add its configurations using - * @usb_add_config(). This may fail by returning a negative errno - * value; it should return zero on successful initialization. - * @unbind: Reverses @bind; called as a side effect of unregistering - * this driver. - * @disconnect: optional driver disconnect method - * @suspend: Notifies when the host stops sending USB traffic, - * after function notifications - * @resume: Notifies configuration when the host restarts USB traffic, - * before function notifications - * - * Devices default to reporting self powered operation. Devices which rely - * on bus powered operation should report this in their @bind method. - * - * Before returning from @bind, various fields in the template descriptor - * may be overridden. These include the idVendor/idProduct/bcdDevice values - * normally to bind the appropriate host side driver, and the three strings - * (iManufacturer, iProduct, iSerialNumber) normally used to provide user - * meaningful device identifiers. (The strings will not be defined unless - * they are defined in @dev and @strings.) The correct ep0 maxpacket size - * is also reported, as defined by the underlying controller driver. - */ -struct usb_composite_driver { - const char *name; - const char *iProduct; - const char *iManufacturer; - const char *iSerialNumber; - const struct usb_device_descriptor *dev; - struct usb_gadget_strings **strings; - enum usb_device_speed max_speed; - unsigned needs_serial:1; - - int (*bind)(struct usb_composite_dev *cdev); - int (*unbind)(struct usb_composite_dev *); - - void (*disconnect)(struct usb_composite_dev *); - - /* global suspend hooks */ - void (*suspend)(struct usb_composite_dev *); - void (*resume)(struct usb_composite_dev *); -}; - -extern int usb_composite_probe(struct usb_composite_driver *driver); -extern void usb_composite_unregister(struct usb_composite_driver *driver); -extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); - - -/** - * struct usb_composite_device - represents one composite usb gadget - * @gadget: read-only, abstracts the gadget's usb peripheral controller - * @req: used for control responses; buffer is pre-allocated - * @bufsiz: size of buffer pre-allocated in @req - * @config: the currently active configuration - * - * One of these devices is allocated and initialized before the - * associated device driver's bind() is called. - * - * OPEN ISSUE: it appears that some WUSB devices will need to be - * built by combining a normal (wired) gadget with a wireless one. - * This revision of the gadget framework should probably try to make - * sure doing that won't hurt too much. - * - * One notion for how to handle Wireless USB devices involves: - * (a) a second gadget here, discovery mechanism TBD, but likely - * needing separate "register/unregister WUSB gadget" calls; - * (b) updates to usb_gadget to include flags "is it wireless", - * "is it wired", plus (presumably in a wrapper structure) - * bandgroup and PHY info; - * (c) presumably a wireless_ep wrapping a usb_ep, and reporting - * wireless-specific parameters like maxburst and maxsequence; - * (d) configurations that are specific to wireless links; - * (e) function drivers that understand wireless configs and will - * support wireless for (additional) function instances; - * (f) a function to support association setup (like CBAF), not - * necessarily requiring a wireless adapter; - * (g) composite device setup that can create one or more wireless - * configs, including appropriate association setup support; - * (h) more, TBD. - */ -struct usb_composite_dev { - struct usb_gadget *gadget; - struct usb_request *req; - unsigned bufsiz; - - struct usb_configuration *config; - - /* private: */ - /* internals */ - unsigned int suspended:1; - struct usb_device_descriptor desc; - struct list_head configs; - struct usb_composite_driver *driver; - u8 next_string_id; - u8 manufacturer_override; - u8 product_override; - u8 serial_override; - - /* the gadget driver won't enable the data pullup - * while the deactivation count is nonzero. - */ - unsigned deactivations; - - /* the composite driver won't complete the control transfer's - * data/status stages till delayed_status is zero. - */ - int delayed_status; - - /* protects deactivations and delayed_status counts*/ - spinlock_t lock; -}; - -extern int usb_string_id(struct usb_composite_dev *c); -extern int usb_string_ids_tab(struct usb_composite_dev *c, - struct usb_string *str); -extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n); - - -/* messaging utils */ -#define DBG(d, fmt, args...) \ - dev_dbg(&(d)->gadget->dev , fmt , ## args) -#define VDBG(d, fmt, args...) \ - dev_vdbg(&(d)->gadget->dev , fmt , ## args) -#define ERROR(d, fmt, args...) \ - dev_err(&(d)->gadget->dev , fmt , ## args) -#define WARNING(d, fmt, args...) \ - dev_warn(&(d)->gadget->dev , fmt , ## args) -#define INFO(d, fmt, args...) \ - dev_info(&(d)->gadget->dev , fmt , ## args) - -#endif /* __LINUX_USB_COMPOSITE_H */ diff --git a/drivers/staging/ccg/config.c b/drivers/staging/ccg/config.c deleted file mode 100644 index 7542a72ce51..00000000000 --- a/drivers/staging/ccg/config.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * usb/gadget/config.c -- simplify building config descriptors - * - * Copyright (C) 2003 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - - -/** - * usb_descriptor_fillbuf - fill buffer with descriptors - * @buf: Buffer to be filled - * @buflen: Size of buf - * @src: Array of descriptor pointers, terminated by null pointer. - * - * Copies descriptors into the buffer, returning the length or a - * negative error code if they can't all be copied. Useful when - * assembling descriptors for an associated set of interfaces used - * as part of configuring a composite device; or in other cases where - * sets of descriptors need to be marshaled. - */ -int -usb_descriptor_fillbuf(void *buf, unsigned buflen, - const struct usb_descriptor_header **src) -{ - u8 *dest = buf; - - if (!src) - return -EINVAL; - - /* fill buffer from src[] until null descriptor ptr */ - for (; NULL != *src; src++) { - unsigned len = (*src)->bLength; - - if (len > buflen) - return -EINVAL; - memcpy(dest, *src, len); - buflen -= len; - dest += len; - } - return dest - (u8 *)buf; -} - - -/** - * usb_gadget_config_buf - builts a complete configuration descriptor - * @config: Header for the descriptor, including characteristics such - * as power requirements and number of interfaces. - * @desc: Null-terminated vector of pointers to the descriptors (interface, - * endpoint, etc) defining all functions in this device configuration. - * @buf: Buffer for the resulting configuration descriptor. - * @length: Length of buffer. If this is not big enough to hold the - * entire configuration descriptor, an error code will be returned. - * - * This copies descriptors into the response buffer, building a descriptor - * for that configuration. It returns the buffer length or a negative - * status code. The config.wTotalLength field is set to match the length - * of the result, but other descriptor fields (including power usage and - * interface count) must be set by the caller. - * - * Gadget drivers could use this when constructing a config descriptor - * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the - * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. - */ -int usb_gadget_config_buf( - const struct usb_config_descriptor *config, - void *buf, - unsigned length, - const struct usb_descriptor_header **desc -) -{ - struct usb_config_descriptor *cp = buf; - int len; - - /* config descriptor first */ - if (length < USB_DT_CONFIG_SIZE || !desc) - return -EINVAL; - *cp = *config; - - /* then interface/endpoint/class/vendor/... */ - len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf, - length - USB_DT_CONFIG_SIZE, desc); - if (len < 0) - return len; - len += USB_DT_CONFIG_SIZE; - if (len > 0xffff) - return -EINVAL; - - /* patch up the config descriptor */ - cp->bLength = USB_DT_CONFIG_SIZE; - cp->bDescriptorType = USB_DT_CONFIG; - cp->wTotalLength = cpu_to_le16(len); - cp->bmAttributes |= USB_CONFIG_ATT_ONE; - return len; -} - -/** - * usb_copy_descriptors - copy a vector of USB descriptors - * @src: null-terminated vector to copy - * Context: initialization code, which may sleep - * - * This makes a copy of a vector of USB descriptors. Its primary use - * is to support usb_function objects which can have multiple copies, - * each needing different descriptors. Functions may have static - * tables of descriptors, which are used as templates and customized - * with identifiers (for interfaces, strings, endpoints, and more) - * as needed by a given function instance. - */ -struct usb_descriptor_header ** -usb_copy_descriptors(struct usb_descriptor_header **src) -{ - struct usb_descriptor_header **tmp; - unsigned bytes; - unsigned n_desc; - void *mem; - struct usb_descriptor_header **ret; - - /* count descriptors and their sizes; then add vector size */ - for (bytes = 0, n_desc = 0, tmp = src; *tmp; tmp++, n_desc++) - bytes += (*tmp)->bLength; - bytes += (n_desc + 1) * sizeof(*tmp); - - mem = kmalloc(bytes, GFP_KERNEL); - if (!mem) - return NULL; - - /* fill in pointers starting at "tmp", - * to descriptors copied starting at "mem"; - * and return "ret" - */ - tmp = mem; - ret = mem; - mem += (n_desc + 1) * sizeof(*tmp); - while (*src) { - memcpy(mem, *src, (*src)->bLength); - *tmp = mem; - tmp++; - mem += (*src)->bLength; - src++; - } - *tmp = NULL; - - return ret; -} - diff --git a/drivers/staging/ccg/epautoconf.c b/drivers/staging/ccg/epautoconf.c deleted file mode 100644 index 51f3d42f5a6..00000000000 --- a/drivers/staging/ccg/epautoconf.c +++ /dev/null @@ -1,393 +0,0 @@ -/* - * epautoconf.c -- endpoint autoconfiguration for usb gadget drivers - * - * Copyright (C) 2004 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include "gadget_chips.h" - - -/* we must assign addresses for configurable endpoints (like net2280) */ -static unsigned epnum; - -// #define MANY_ENDPOINTS -#ifdef MANY_ENDPOINTS -/* more than 15 configurable endpoints */ -static unsigned in_epnum; -#endif - - -/* - * This should work with endpoints from controller drivers sharing the - * same endpoint naming convention. By example: - * - * - ep1, ep2, ... address is fixed, not direction or type - * - ep1in, ep2out, ... address and direction are fixed, not type - * - ep1-bulk, ep2-bulk, ... address and type are fixed, not direction - * - ep1in-bulk, ep2out-iso, ... all three are fixed - * - ep-* ... no functionality restrictions - * - * Type suffixes are "-bulk", "-iso", or "-int". Numbers are decimal. - * Less common restrictions are implied by gadget_is_*(). - * - * NOTE: each endpoint is unidirectional, as specified by its USB - * descriptor; and isn't specific to a configuration or altsetting. - */ -static int -ep_matches ( - struct usb_gadget *gadget, - struct usb_ep *ep, - struct usb_endpoint_descriptor *desc, - struct usb_ss_ep_comp_descriptor *ep_comp -) -{ - u8 type; - const char *tmp; - u16 max; - - int num_req_streams = 0; - - /* endpoint already claimed? */ - if (NULL != ep->driver_data) - return 0; - - /* only support ep0 for portable CONTROL traffic */ - type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; - if (USB_ENDPOINT_XFER_CONTROL == type) - return 0; - - /* some other naming convention */ - if ('e' != ep->name[0]) - return 0; - - /* type-restriction: "-iso", "-bulk", or "-int". - * direction-restriction: "in", "out". - */ - if ('-' != ep->name[2]) { - tmp = strrchr (ep->name, '-'); - if (tmp) { - switch (type) { - case USB_ENDPOINT_XFER_INT: - /* bulk endpoints handle interrupt transfers, - * except the toggle-quirky iso-synch kind - */ - if ('s' == tmp[2]) // == "-iso" - return 0; - /* for now, avoid PXA "interrupt-in"; - * it's documented as never using DATA1. - */ - if (gadget_is_pxa (gadget) - && 'i' == tmp [1]) - return 0; - break; - case USB_ENDPOINT_XFER_BULK: - if ('b' != tmp[1]) // != "-bulk" - return 0; - break; - case USB_ENDPOINT_XFER_ISOC: - if ('s' != tmp[2]) // != "-iso" - return 0; - } - } else { - tmp = ep->name + strlen (ep->name); - } - - /* direction-restriction: "..in-..", "out-.." */ - tmp--; - if (!isdigit (*tmp)) { - if (desc->bEndpointAddress & USB_DIR_IN) { - if ('n' != *tmp) - return 0; - } else { - if ('t' != *tmp) - return 0; - } - } - } - - /* - * Get the number of required streams from the EP companion - * descriptor and see if the EP matches it - */ - if (usb_endpoint_xfer_bulk(desc)) { - if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) { - num_req_streams = ep_comp->bmAttributes & 0x1f; - if (num_req_streams > ep->max_streams) - return 0; - } - - } - - /* - * If the protocol driver hasn't yet decided on wMaxPacketSize - * and wants to know the maximum possible, provide the info. - */ - if (desc->wMaxPacketSize == 0) - desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket); - - /* endpoint maxpacket size is an input parameter, except for bulk - * where it's an output parameter representing the full speed limit. - * the usb spec fixes high speed bulk maxpacket at 512 bytes. - */ - max = 0x7ff & usb_endpoint_maxp(desc); - switch (type) { - case USB_ENDPOINT_XFER_INT: - /* INT: limit 64 bytes full speed, 1024 high/super speed */ - if (!gadget_is_dualspeed(gadget) && max > 64) - return 0; - /* FALLTHROUGH */ - - case USB_ENDPOINT_XFER_ISOC: - /* ISO: limit 1023 bytes full speed, 1024 high/super speed */ - if (ep->maxpacket < max) - return 0; - if (!gadget_is_dualspeed(gadget) && max > 1023) - return 0; - - /* BOTH: "high bandwidth" works only at high speed */ - if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) { - if (!gadget_is_dualspeed(gadget)) - return 0; - /* configure your hardware with enough buffering!! */ - } - break; - } - - /* MATCH!! */ - - /* report address */ - desc->bEndpointAddress &= USB_DIR_IN; - if (isdigit (ep->name [2])) { - u8 num = simple_strtoul (&ep->name [2], NULL, 10); - desc->bEndpointAddress |= num; -#ifdef MANY_ENDPOINTS - } else if (desc->bEndpointAddress & USB_DIR_IN) { - if (++in_epnum > 15) - return 0; - desc->bEndpointAddress = USB_DIR_IN | in_epnum; -#endif - } else { - if (++epnum > 15) - return 0; - desc->bEndpointAddress |= epnum; - } - - /* report (variable) full speed bulk maxpacket */ - if ((USB_ENDPOINT_XFER_BULK == type) && !ep_comp) { - int size = ep->maxpacket; - - /* min() doesn't work on bitfields with gcc-3.5 */ - if (size > 64) - size = 64; - desc->wMaxPacketSize = cpu_to_le16(size); - } - ep->address = desc->bEndpointAddress; - return 1; -} - -static struct usb_ep * -find_ep (struct usb_gadget *gadget, const char *name) -{ - struct usb_ep *ep; - - list_for_each_entry (ep, &gadget->ep_list, ep_list) { - if (0 == strcmp (ep->name, name)) - return ep; - } - return NULL; -} - -/** - * usb_ep_autoconfig_ss() - choose an endpoint matching the ep - * descriptor and ep companion descriptor - * @gadget: The device to which the endpoint must belong. - * @desc: Endpoint descriptor, with endpoint direction and transfer mode - * initialized. For periodic transfers, the maximum packet - * size must also be initialized. This is modified on - * success. - * @ep_comp: Endpoint companion descriptor, with the required - * number of streams. Will be modified when the chosen EP - * supports a different number of streams. - * - * This routine replaces the usb_ep_autoconfig when needed - * superspeed enhancments. If such enhancemnets are required, - * the FD should call usb_ep_autoconfig_ss directly and provide - * the additional ep_comp parameter. - * - * By choosing an endpoint to use with the specified descriptor, - * this routine simplifies writing gadget drivers that work with - * multiple USB device controllers. The endpoint would be - * passed later to usb_ep_enable(), along with some descriptor. - * - * That second descriptor won't always be the same as the first one. - * For example, isochronous endpoints can be autoconfigured for high - * bandwidth, and then used in several lower bandwidth altsettings. - * Also, high and full speed descriptors will be different. - * - * Be sure to examine and test the results of autoconfiguration - * on your hardware. This code may not make the best choices - * about how to use the USB controller, and it can't know all - * the restrictions that may apply. Some combinations of driver - * and hardware won't be able to autoconfigure. - * - * On success, this returns an un-claimed usb_ep, and modifies the endpoint - * descriptor bEndpointAddress. For bulk endpoints, the wMaxPacket value - * is initialized as if the endpoint were used at full speed and - * the bmAttribute field in the ep companion descriptor is - * updated with the assigned number of streams if it is - * different from the original value. To prevent the endpoint - * from being returned by a later autoconfig call, claim it by - * assigning ep->driver_data to some non-null value. - * - * On failure, this returns a null endpoint descriptor. - */ -struct usb_ep *usb_ep_autoconfig_ss( - struct usb_gadget *gadget, - struct usb_endpoint_descriptor *desc, - struct usb_ss_ep_comp_descriptor *ep_comp -) -{ - struct usb_ep *ep; - u8 type; - - type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; - - /* First, apply chip-specific "best usage" knowledge. - * This might make a good usb_gadget_ops hook ... - */ - if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) { - /* ep-e, ep-f are PIO with only 64 byte fifos */ - ep = find_ep (gadget, "ep-e"); - if (ep && ep_matches(gadget, ep, desc, ep_comp)) - goto found_ep; - ep = find_ep (gadget, "ep-f"); - if (ep && ep_matches(gadget, ep, desc, ep_comp)) - goto found_ep; - - } else if (gadget_is_goku (gadget)) { - if (USB_ENDPOINT_XFER_INT == type) { - /* single buffering is enough */ - ep = find_ep(gadget, "ep3-bulk"); - if (ep && ep_matches(gadget, ep, desc, ep_comp)) - goto found_ep; - } else if (USB_ENDPOINT_XFER_BULK == type - && (USB_DIR_IN & desc->bEndpointAddress)) { - /* DMA may be available */ - ep = find_ep(gadget, "ep2-bulk"); - if (ep && ep_matches(gadget, ep, desc, - ep_comp)) - goto found_ep; - } - -#ifdef CONFIG_BLACKFIN - } else if (gadget_is_musbhdrc(gadget)) { - if ((USB_ENDPOINT_XFER_BULK == type) || - (USB_ENDPOINT_XFER_ISOC == type)) { - if (USB_DIR_IN & desc->bEndpointAddress) - ep = find_ep (gadget, "ep5in"); - else - ep = find_ep (gadget, "ep6out"); - } else if (USB_ENDPOINT_XFER_INT == type) { - if (USB_DIR_IN & desc->bEndpointAddress) - ep = find_ep(gadget, "ep1in"); - else - ep = find_ep(gadget, "ep2out"); - } else - ep = NULL; - if (ep && ep_matches(gadget, ep, desc, ep_comp)) - goto found_ep; -#endif - } - - /* Second, look at endpoints until an unclaimed one looks usable */ - list_for_each_entry (ep, &gadget->ep_list, ep_list) { - if (ep_matches(gadget, ep, desc, ep_comp)) - goto found_ep; - } - - /* Fail */ - return NULL; -found_ep: - ep->desc = NULL; - ep->comp_desc = NULL; - return ep; -} - -/** - * usb_ep_autoconfig() - choose an endpoint matching the - * descriptor - * @gadget: The device to which the endpoint must belong. - * @desc: Endpoint descriptor, with endpoint direction and transfer mode - * initialized. For periodic transfers, the maximum packet - * size must also be initialized. This is modified on success. - * - * By choosing an endpoint to use with the specified descriptor, this - * routine simplifies writing gadget drivers that work with multiple - * USB device controllers. The endpoint would be passed later to - * usb_ep_enable(), along with some descriptor. - * - * That second descriptor won't always be the same as the first one. - * For example, isochronous endpoints can be autoconfigured for high - * bandwidth, and then used in several lower bandwidth altsettings. - * Also, high and full speed descriptors will be different. - * - * Be sure to examine and test the results of autoconfiguration on your - * hardware. This code may not make the best choices about how to use the - * USB controller, and it can't know all the restrictions that may apply. - * Some combinations of driver and hardware won't be able to autoconfigure. - * - * On success, this returns an un-claimed usb_ep, and modifies the endpoint - * descriptor bEndpointAddress. For bulk endpoints, the wMaxPacket value - * is initialized as if the endpoint were used at full speed. To prevent - * the endpoint from being returned by a later autoconfig call, claim it - * by assigning ep->driver_data to some non-null value. - * - * On failure, this returns a null endpoint descriptor. - */ -struct usb_ep *usb_ep_autoconfig( - struct usb_gadget *gadget, - struct usb_endpoint_descriptor *desc -) -{ - return usb_ep_autoconfig_ss(gadget, desc, NULL); -} - - -/** - * usb_ep_autoconfig_reset - reset endpoint autoconfig state - * @gadget: device for which autoconfig state will be reset - * - * Use this for devices where one configuration may need to assign - * endpoint resources very differently from the next one. It clears - * state such as ep->driver_data and the record of assigned endpoints - * used by usb_ep_autoconfig(). - */ -void usb_ep_autoconfig_reset (struct usb_gadget *gadget) -{ - struct usb_ep *ep; - - list_for_each_entry (ep, &gadget->ep_list, ep_list) { - ep->driver_data = NULL; - } -#ifdef MANY_ENDPOINTS - in_epnum = 0; -#endif - epnum = 0; -} - diff --git a/drivers/staging/ccg/f_acm.c b/drivers/staging/ccg/f_acm.c deleted file mode 100644 index d672250a61f..00000000000 --- a/drivers/staging/ccg/f_acm.c +++ /dev/null @@ -1,814 +0,0 @@ -/* - * f_acm.c -- USB CDC serial (ACM) function driver - * - * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) - * Copyright (C) 2008 by David Brownell - * Copyright (C) 2008 by Nokia Corporation - * Copyright (C) 2009 by Samsung Electronics - * Author: Michal Nazarewicz (mina86@mina86.com) - * - * This software is distributed under the terms of the GNU General - * Public License ("GPL") as published by the Free Software Foundation, - * either version 2 of that License or (at your option) any later version. - */ - -/* #define VERBOSE_DEBUG */ - -#include -#include -#include - -#include "u_serial.h" -#include "gadget_chips.h" - - -/* - * This CDC ACM function support just wraps control functions and - * notifications around the generic serial-over-usb code. - * - * Because CDC ACM is standardized by the USB-IF, many host operating - * systems have drivers for it. Accordingly, ACM is the preferred - * interop solution for serial-port type connections. The control - * models are often not necessary, and in any case don't do much in - * this bare-bones implementation. - * - * Note that even MS-Windows has some support for ACM. However, that - * support is somewhat broken because when you use ACM in a composite - * device, having multiple interfaces confuses the poor OS. It doesn't - * seem to understand CDC Union descriptors. The new "association" - * descriptors (roughly equivalent to CDC Unions) may sometimes help. - */ - -struct f_acm { - struct gserial port; - u8 ctrl_id, data_id; - u8 port_num; - - u8 pending; - - /* lock is mostly for pending and notify_req ... they get accessed - * by callbacks both from tty (open/close/break) under its spinlock, - * and notify_req.complete() which can't use that lock. - */ - spinlock_t lock; - - struct usb_ep *notify; - struct usb_request *notify_req; - - struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */ - - /* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */ - u16 port_handshake_bits; -#define ACM_CTRL_RTS (1 << 1) /* unused with full duplex */ -#define ACM_CTRL_DTR (1 << 0) /* host is ready for data r/w */ - - /* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */ - u16 serial_state; -#define ACM_CTRL_OVERRUN (1 << 6) -#define ACM_CTRL_PARITY (1 << 5) -#define ACM_CTRL_FRAMING (1 << 4) -#define ACM_CTRL_RI (1 << 3) -#define ACM_CTRL_BRK (1 << 2) -#define ACM_CTRL_DSR (1 << 1) -#define ACM_CTRL_DCD (1 << 0) -}; - -static inline struct f_acm *func_to_acm(struct usb_function *f) -{ - return container_of(f, struct f_acm, port.func); -} - -static inline struct f_acm *port_to_acm(struct gserial *p) -{ - return container_of(p, struct f_acm, port); -} - -/*-------------------------------------------------------------------------*/ - -/* notification endpoint uses smallish and infrequent fixed-size messages */ - -#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */ -#define GS_NOTIFY_MAXPACKET 10 /* notification + 2 bytes */ - -/* interface and class descriptors: */ - -static struct usb_interface_assoc_descriptor -acm_iad_descriptor = { - .bLength = sizeof acm_iad_descriptor, - .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION, - - /* .bFirstInterface = DYNAMIC, */ - .bInterfaceCount = 2, // control + data - .bFunctionClass = USB_CLASS_COMM, - .bFunctionSubClass = USB_CDC_SUBCLASS_ACM, - .bFunctionProtocol = USB_CDC_ACM_PROTO_AT_V25TER, - /* .iFunction = DYNAMIC */ -}; - - -static struct usb_interface_descriptor acm_control_interface_desc = { - .bLength = USB_DT_INTERFACE_SIZE, - .bDescriptorType = USB_DT_INTERFACE, - /* .bInterfaceNumber = DYNAMIC */ - .bNumEndpoints = 1, - .bInterfaceClass = USB_CLASS_COMM, - .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, - .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER, - /* .iInterface = DYNAMIC */ -}; - -static struct usb_interface_descriptor acm_data_interface_desc = { - .bLength = USB_DT_INTERFACE_SIZE, - .bDescriptorType = USB_DT_INTERFACE, - /* .bInterfaceNumber = DYNAMIC */ - .bNumEndpoints = 2, - .bInterfaceClass = USB_CLASS_CDC_DATA, - .bInterfaceSubClass = 0, - .bInterfaceProtocol = 0, - /* .iInterface = DYNAMIC */ -}; - -static struct usb_cdc_header_desc acm_header_desc = { - .bLength = sizeof(acm_header_desc), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubType = USB_CDC_HEADER_TYPE, - .bcdCDC = cpu_to_le16(0x0110), -}; - -static struct usb_cdc_call_mgmt_descriptor -acm_call_mgmt_descriptor = { - .bLength = sizeof(acm_call_mgmt_descriptor), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, - .bmCapabilities = 0, - /* .bDataInterface = DYNAMIC */ -}; - -static struct usb_cdc_acm_descriptor acm_descriptor = { - .bLength = sizeof(acm_descriptor), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubType = USB_CDC_ACM_TYPE, - .bmCapabilities = USB_CDC_CAP_LINE, -}; - -static struct usb_cdc_union_desc acm_union_desc = { - .bLength = sizeof(acm_union_desc), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubType = USB_CDC_UNION_TYPE, - /* .bMasterInterface0 = DYNAMIC */ - /* .bSlaveInterface0 = DYNAMIC */ -}; - -/* full speed support: */ - -static struct usb_endpoint_descriptor acm_fs_notify_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET), - .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL, -}; - -static struct usb_endpoint_descriptor acm_fs_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_BULK, -}; - -static struct usb_endpoint_descriptor acm_fs_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, -}; - -static struct usb_descriptor_header *acm_fs_function[] = { - (struct usb_descriptor_header *) &acm_iad_descriptor, - (struct usb_descriptor_header *) &acm_control_interface_desc, - (struct usb_descriptor_header *) &acm_header_desc, - (struct usb_descriptor_header *) &acm_call_mgmt_descriptor, - (struct usb_descriptor_header *) &acm_descriptor, - (struct usb_descriptor_header *) &acm_union_desc, - (struct usb_descriptor_header *) &acm_fs_notify_desc, - (struct usb_descriptor_header *) &acm_data_interface_desc, - (struct usb_descriptor_header *) &acm_fs_in_desc, - (struct usb_descriptor_header *) &acm_fs_out_desc, - NULL, -}; - -/* high speed support: */ - -static struct usb_endpoint_descriptor acm_hs_notify_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET), - .bInterval = GS_LOG2_NOTIFY_INTERVAL+4, -}; - -static struct usb_endpoint_descriptor acm_hs_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512), -}; - -static struct usb_endpoint_descriptor acm_hs_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512), -}; - -static struct usb_descriptor_header *acm_hs_function[] = { - (struct usb_descriptor_header *) &acm_iad_descriptor, - (struct usb_descriptor_header *) &acm_control_interface_desc, - (struct usb_descriptor_header *) &acm_header_desc, - (struct usb_descriptor_header *) &acm_call_mgmt_descriptor, - (struct usb_descriptor_header *) &acm_descriptor, - (struct usb_descriptor_header *) &acm_union_desc, - (struct usb_descriptor_header *) &acm_hs_notify_desc, - (struct usb_descriptor_header *) &acm_data_interface_desc, - (struct usb_descriptor_header *) &acm_hs_in_desc, - (struct usb_descriptor_header *) &acm_hs_out_desc, - NULL, -}; - -static struct usb_endpoint_descriptor acm_ss_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(1024), -}; - -static struct usb_endpoint_descriptor acm_ss_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(1024), -}; - -static struct usb_ss_ep_comp_descriptor acm_ss_bulk_comp_desc = { - .bLength = sizeof acm_ss_bulk_comp_desc, - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, -}; - -static struct usb_descriptor_header *acm_ss_function[] = { - (struct usb_descriptor_header *) &acm_iad_descriptor, - (struct usb_descriptor_header *) &acm_control_interface_desc, - (struct usb_descriptor_header *) &acm_header_desc, - (struct usb_descriptor_header *) &acm_call_mgmt_descriptor, - (struct usb_descriptor_header *) &acm_descriptor, - (struct usb_descriptor_header *) &acm_union_desc, - (struct usb_descriptor_header *) &acm_hs_notify_desc, - (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc, - (struct usb_descriptor_header *) &acm_data_interface_desc, - (struct usb_descriptor_header *) &acm_ss_in_desc, - (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc, - (struct usb_descriptor_header *) &acm_ss_out_desc, - (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc, - NULL, -}; - -/* string descriptors: */ - -#define ACM_CTRL_IDX 0 -#define ACM_DATA_IDX 1 -#define ACM_IAD_IDX 2 - -/* static strings, in UTF-8 */ -static struct usb_string acm_string_defs[] = { - [ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)", - [ACM_DATA_IDX].s = "CDC ACM Data", - [ACM_IAD_IDX ].s = "CDC Serial", - { /* ZEROES END LIST */ }, -}; - -static struct usb_gadget_strings acm_string_table = { - .language = 0x0409, /* en-us */ - .strings = acm_string_defs, -}; - -static struct usb_gadget_strings *acm_strings[] = { - &acm_string_table, - NULL, -}; - -/*-------------------------------------------------------------------------*/ - -/* ACM control ... data handling is delegated to tty library code. - * The main task of this function is to activate and deactivate - * that code based on device state; track parameters like line - * speed, handshake state, and so on; and issue notifications. - */ - -static void acm_complete_set_line_coding(struct usb_ep *ep, - struct usb_request *req) -{ - struct f_acm *acm = ep->driver_data; - struct usb_composite_dev *cdev = acm->port.func.config->cdev; - - if (req->status != 0) { - DBG(cdev, "acm ttyGS%d completion, err %d\n", - acm->port_num, req->status); - return; - } - - /* normal completion */ - if (req->actual != sizeof(acm->port_line_coding)) { - DBG(cdev, "acm ttyGS%d short resp, len %d\n", - acm->port_num, req->actual); - usb_ep_set_halt(ep); - } else { - struct usb_cdc_line_coding *value = req->buf; - - /* REVISIT: we currently just remember this data. - * If we change that, (a) validate it first, then - * (b) update whatever hardware needs updating, - * (c) worry about locking. This is information on - * the order of 9600-8-N-1 ... most of which means - * nothing unless we control a real RS232 line. - */ - acm->port_line_coding = *value; - } -} - -static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) -{ - struct f_acm *acm = func_to_acm(f); - struct usb_composite_dev *cdev = f->config->cdev; - struct usb_request *req = cdev->req; - int value = -EOPNOTSUPP; - u16 w_index = le16_to_cpu(ctrl->wIndex); - u16 w_value = le16_to_cpu(ctrl->wValue); - u16 w_length = le16_to_cpu(ctrl->wLength); - - /* composite driver infrastructure handles everything except - * CDC class messages; interface activation uses set_alt(). - * - * Note CDC spec table 4 lists the ACM request profile. It requires - * encapsulated command support ... we don't handle any, and respond - * to them by stalling. Options include get/set/clear comm features - * (not that useful) and SEND_BREAK. - */ - switch ((ctrl->bRequestType << 8) | ctrl->bRequest) { - - /* SET_LINE_CODING ... just read and save what the host sends */ - case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) - | USB_CDC_REQ_SET_LINE_CODING: - if (w_length != sizeof(struct usb_cdc_line_coding) - || w_index != acm->ctrl_id) - goto invalid; - - value = w_length; - cdev->gadget->ep0->driver_data = acm; - req->complete = acm_complete_set_line_coding; - break; - - /* GET_LINE_CODING ... return what host sent, or initial value */ - case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) - | USB_CDC_REQ_GET_LINE_CODING: - if (w_index != acm->ctrl_id) - goto invalid; - - value = min_t(unsigned, w_length, - sizeof(struct usb_cdc_line_coding)); - memcpy(req->buf, &acm->port_line_coding, value); - break; - - /* SET_CONTROL_LINE_STATE ... save what the host sent */ - case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) - | USB_CDC_REQ_SET_CONTROL_LINE_STATE: - if (w_index != acm->ctrl_id) - goto invalid; - - value = 0; - - /* FIXME we should not allow data to flow until the - * host sets the ACM_CTRL_DTR bit; and when it clears - * that bit, we should return to that no-flow state. - */ - acm->port_handshake_bits = w_value; - break; - - default: -invalid: - VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", - ctrl->bRequestType, ctrl->bRequest, - w_value, w_index, w_length); - } - - /* respond with data transfer or status phase? */ - if (value >= 0) { - DBG(cdev, "acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n", - acm->port_num, ctrl->bRequestType, ctrl->bRequest, - w_value, w_index, w_length); - req->zero = 0; - req->length = value; - value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); - if (value < 0) - ERROR(cdev, "acm response on ttyGS%d, err %d\n", - acm->port_num, value); - } - - /* device either stalls (value < 0) or reports success */ - return value; -} - -static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) -{ - struct f_acm *acm = func_to_acm(f); - struct usb_composite_dev *cdev = f->config->cdev; - - /* we know alt == 0, so this is an activation or a reset */ - - if (intf == acm->ctrl_id) { - if (acm->notify->driver_data) { - VDBG(cdev, "reset acm control interface %d\n", intf); - usb_ep_disable(acm->notify); - } else { - VDBG(cdev, "init acm ctrl interface %d\n", intf); - if (config_ep_by_speed(cdev->gadget, f, acm->notify)) - return -EINVAL; - } - usb_ep_enable(acm->notify); - acm->notify->driver_data = acm; - - } else if (intf == acm->data_id) { - if (acm->port.in->driver_data) { - DBG(cdev, "reset acm ttyGS%d\n", acm->port_num); - gserial_disconnect(&acm->port); - } - if (!acm->port.in->desc || !acm->port.out->desc) { - DBG(cdev, "activate acm ttyGS%d\n", acm->port_num); - if (config_ep_by_speed(cdev->gadget, f, - acm->port.in) || - config_ep_by_speed(cdev->gadget, f, - acm->port.out)) { - acm->port.in->desc = NULL; - acm->port.out->desc = NULL; - return -EINVAL; - } - } - gserial_connect(&acm->port, acm->port_num); - - } else - return -EINVAL; - - return 0; -} - -static void acm_disable(struct usb_function *f) -{ - struct f_acm *acm = func_to_acm(f); - struct usb_composite_dev *cdev = f->config->cdev; - - DBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num); - gserial_disconnect(&acm->port); - usb_ep_disable(acm->notify); - acm->notify->driver_data = NULL; -} - -/*-------------------------------------------------------------------------*/ - -/** - * acm_cdc_notify - issue CDC notification to host - * @acm: wraps host to be notified - * @type: notification type - * @value: Refer to cdc specs, wValue field. - * @data: data to be sent - * @length: size of data - * Context: irqs blocked, acm->lock held, acm_notify_req non-null - * - * Returns zero on success or a negative errno. - * - * See section 6.3.5 of the CDC 1.1 specification for information - * about the only notification we issue: SerialState change. - */ -static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value, - void *data, unsigned length) -{ - struct usb_ep *ep = acm->notify; - struct usb_request *req; - struct usb_cdc_notification *notify; - const unsigned len = sizeof(*notify) + length; - void *buf; - int status; - - req = acm->notify_req; - acm->notify_req = NULL; - acm->pending = false; - - req->length = len; - notify = req->buf; - buf = notify + 1; - - notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS - | USB_RECIP_INTERFACE; - notify->bNotificationType = type; - notify->wValue = cpu_to_le16(value); - notify->wIndex = cpu_to_le16(acm->ctrl_id); - notify->wLength = cpu_to_le16(length); - memcpy(buf, data, length); - - /* ep_queue() can complete immediately if it fills the fifo... */ - spin_unlock(&acm->lock); - status = usb_ep_queue(ep, req, GFP_ATOMIC); - spin_lock(&acm->lock); - - if (status < 0) { - ERROR(acm->port.func.config->cdev, - "acm ttyGS%d can't notify serial state, %d\n", - acm->port_num, status); - acm->notify_req = req; - } - - return status; -} - -static int acm_notify_serial_state(struct f_acm *acm) -{ - struct usb_composite_dev *cdev = acm->port.func.config->cdev; - int status; - - spin_lock(&acm->lock); - if (acm->notify_req) { - DBG(cdev, "acm ttyGS%d serial state %04x\n", - acm->port_num, acm->serial_state); - status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE, - 0, &acm->serial_state, sizeof(acm->serial_state)); - } else { - acm->pending = true; - status = 0; - } - spin_unlock(&acm->lock); - return status; -} - -static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct f_acm *acm = req->context; - u8 doit = false; - - /* on this call path we do NOT hold the port spinlock, - * which is why ACM needs its own spinlock - */ - spin_lock(&acm->lock); - if (req->status != -ESHUTDOWN) - doit = acm->pending; - acm->notify_req = req; - spin_unlock(&acm->lock); - - if (doit) - acm_notify_serial_state(acm); -} - -/* connect == the TTY link is open */ - -static void acm_connect(struct gserial *port) -{ - struct f_acm *acm = port_to_acm(port); - - acm->serial_state |= ACM_CTRL_DSR | ACM_CTRL_DCD; - acm_notify_serial_state(acm); -} - -static void acm_disconnect(struct gserial *port) -{ - struct f_acm *acm = port_to_acm(port); - - acm->serial_state &= ~(ACM_CTRL_DSR | ACM_CTRL_DCD); - acm_notify_serial_state(acm); -} - -static int acm_send_break(struct gserial *port, int duration) -{ - struct f_acm *acm = port_to_acm(port); - u16 state; - - state = acm->serial_state; - state &= ~ACM_CTRL_BRK; - if (duration) - state |= ACM_CTRL_BRK; - - acm->serial_state = state; - return acm_notify_serial_state(acm); -} - -/*-------------------------------------------------------------------------*/ - -/* ACM function driver setup/binding */ -static int -acm_bind(struct usb_configuration *c, struct usb_function *f) -{ - struct usb_composite_dev *cdev = c->cdev; - struct f_acm *acm = func_to_acm(f); - int status; - struct usb_ep *ep; - - /* allocate instance-specific interface IDs, and patch descriptors */ - status = usb_interface_id(c, f); - if (status < 0) - goto fail; - acm->ctrl_id = status; - acm_iad_descriptor.bFirstInterface = status; - - acm_control_interface_desc.bInterfaceNumber = status; - acm_union_desc .bMasterInterface0 = status; - - status = usb_interface_id(c, f); - if (status < 0) - goto fail; - acm->data_id = status; - - acm_data_interface_desc.bInterfaceNumber = status; - acm_union_desc.bSlaveInterface0 = status; - acm_call_mgmt_descriptor.bDataInterface = status; - - status = -ENODEV; - - /* allocate instance-specific endpoints */ - ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_in_desc); - if (!ep) - goto fail; - acm->port.in = ep; - ep->driver_data = cdev; /* claim */ - - ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_out_desc); - if (!ep) - goto fail; - acm->port.out = ep; - ep->driver_data = cdev; /* claim */ - - ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_notify_desc); - if (!ep) - goto fail; - acm->notify = ep; - ep->driver_data = cdev; /* claim */ - - /* allocate notification */ - acm->notify_req = gs_alloc_req(ep, - sizeof(struct usb_cdc_notification) + 2, - GFP_KERNEL); - if (!acm->notify_req) - goto fail; - - acm->notify_req->complete = acm_cdc_notify_complete; - acm->notify_req->context = acm; - - /* copy descriptors */ - f->descriptors = usb_copy_descriptors(acm_fs_function); - if (!f->descriptors) - goto fail; - - /* support all relevant hardware speeds... we expect that when - * hardware is dual speed, all bulk-capable endpoints work at - * both speeds - */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - acm_hs_in_desc.bEndpointAddress = - acm_fs_in_desc.bEndpointAddress; - acm_hs_out_desc.bEndpointAddress = - acm_fs_out_desc.bEndpointAddress; - acm_hs_notify_desc.bEndpointAddress = - acm_fs_notify_desc.bEndpointAddress; - - /* copy descriptors */ - f->hs_descriptors = usb_copy_descriptors(acm_hs_function); - } - if (gadget_is_superspeed(c->cdev->gadget)) { - acm_ss_in_desc.bEndpointAddress = - acm_fs_in_desc.bEndpointAddress; - acm_ss_out_desc.bEndpointAddress = - acm_fs_out_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->ss_descriptors = usb_copy_descriptors(acm_ss_function); - if (!f->ss_descriptors) - goto fail; - } - - DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n", - acm->port_num, - gadget_is_superspeed(c->cdev->gadget) ? "super" : - gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", - acm->port.in->name, acm->port.out->name, - acm->notify->name); - return 0; - -fail: - if (acm->notify_req) - gs_free_req(acm->notify, acm->notify_req); - - /* we might as well release our claims on endpoints */ - if (acm->notify) - acm->notify->driver_data = NULL; - if (acm->port.out) - acm->port.out->driver_data = NULL; - if (acm->port.in) - acm->port.in->driver_data = NULL; - - ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status); - - return status; -} - -static void -acm_unbind(struct usb_configuration *c, struct usb_function *f) -{ - struct f_acm *acm = func_to_acm(f); - - if (gadget_is_dualspeed(c->cdev->gadget)) - usb_free_descriptors(f->hs_descriptors); - if (gadget_is_superspeed(c->cdev->gadget)) - usb_free_descriptors(f->ss_descriptors); - usb_free_descriptors(f->descriptors); - gs_free_req(acm->notify, acm->notify_req); - kfree(acm); -} - -/* Some controllers can't support CDC ACM ... */ -static inline bool can_support_cdc(struct usb_configuration *c) -{ - /* everything else is *probably* fine ... */ - return true; -} - -/** - * acm_bind_config - add a CDC ACM function to a configuration - * @c: the configuration to support the CDC ACM instance - * @port_num: /dev/ttyGS* port this interface will use - * Context: single threaded during gadget setup - * - * Returns zero on success, else negative errno. - * - * Caller must have called @gserial_setup() with enough ports to - * handle all the ones it binds. Caller is also responsible - * for calling @gserial_cleanup() before module unload. - */ -int acm_bind_config(struct usb_configuration *c, u8 port_num) -{ - struct f_acm *acm; - int status; - - if (!can_support_cdc(c)) - return -EINVAL; - - /* REVISIT might want instance-specific strings to help - * distinguish instances ... - */ - - /* maybe allocate device-global string IDs, and patch descriptors */ - if (acm_string_defs[ACM_CTRL_IDX].id == 0) { - status = usb_string_id(c->cdev); - if (status < 0) - return status; - acm_string_defs[ACM_CTRL_IDX].id = status; - - acm_control_interface_desc.iInterface = status; - - status = usb_string_id(c->cdev); - if (status < 0) - return status; - acm_string_defs[ACM_DATA_IDX].id = status; - - acm_data_interface_desc.iInterface = status; - - status = usb_string_id(c->cdev); - if (status < 0) - return status; - acm_string_defs[ACM_IAD_IDX].id = status; - - acm_iad_descriptor.iFunction = status; - } - - /* allocate and initialize one new instance */ - acm = kzalloc(sizeof *acm, GFP_KERNEL); - if (!acm) - return -ENOMEM; - - spin_lock_init(&acm->lock); - - acm->port_num = port_num; - - acm->port.connect = acm_connect; - acm->port.disconnect = acm_disconnect; - acm->port.send_break = acm_send_break; - - acm->port.func.name = "acm"; - acm->port.func.strings = acm_strings; - /* descriptors are per-instance copies */ - acm->port.func.bind = acm_bind; - acm->port.func.unbind = acm_unbind; - acm->port.func.set_alt = acm_set_alt; - acm->port.func.setup = acm_setup; - acm->port.func.disable = acm_disable; - - status = usb_add_function(c, &acm->port.func); - if (status) - kfree(acm); - return status; -} diff --git a/drivers/staging/ccg/f_fs.c b/drivers/staging/ccg/f_fs.c deleted file mode 100644 index 8adc79d1b40..00000000000 --- a/drivers/staging/ccg/f_fs.c +++ /dev/null @@ -1,2455 +0,0 @@ -/* - * f_fs.c -- user mode file system API for USB composite function controllers - * - * Copyright (C) 2010 Samsung Electronics - * Author: Michal Nazarewicz - * - * Based on inode.c (GadgetFS) which was: - * Copyright (C) 2003-2004 David Brownell - * Copyright (C) 2003 Agilent Technologies - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - - -/* #define DEBUG */ -/* #define VERBOSE_DEBUG */ - -#include -#include -#include -#include -#include - -#include -#include - - -#define FUNCTIONFS_MAGIC 0xa647361 /* Chosen by a honest dice roll ;) */ - - -/* Debugging ****************************************************************/ - -#ifdef VERBOSE_DEBUG -# define pr_vdebug pr_debug -# define ffs_dump_mem(prefix, ptr, len) \ - print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len) -#else -# define pr_vdebug(...) do { } while (0) -# define ffs_dump_mem(prefix, ptr, len) do { } while (0) -#endif /* VERBOSE_DEBUG */ - -#define ENTER() pr_vdebug("%s()\n", __func__) - - -/* The data structure and setup file ****************************************/ - -enum ffs_state { - /* - * Waiting for descriptors and strings. - * - * In this state no open(2), read(2) or write(2) on epfiles - * may succeed (which should not be the problem as there - * should be no such files opened in the first place). - */ - FFS_READ_DESCRIPTORS, - FFS_READ_STRINGS, - - /* - * We've got descriptors and strings. We are or have called - * functionfs_ready_callback(). functionfs_bind() may have - * been called but we don't know. - * - * This is the only state in which operations on epfiles may - * succeed. - */ - FFS_ACTIVE, - - /* - * All endpoints have been closed. This state is also set if - * we encounter an unrecoverable error. The only - * unrecoverable error is situation when after reading strings - * from user space we fail to initialise epfiles or - * functionfs_ready_callback() returns with error (<0). - * - * In this state no open(2), read(2) or write(2) (both on ep0 - * as well as epfile) may succeed (at this point epfiles are - * unlinked and all closed so this is not a problem; ep0 is - * also closed but ep0 file exists and so open(2) on ep0 must - * fail). - */ - FFS_CLOSING -}; - - -enum ffs_setup_state { - /* There is no setup request pending. */ - FFS_NO_SETUP, - /* - * User has read events and there was a setup request event - * there. The next read/write on ep0 will handle the - * request. - */ - FFS_SETUP_PENDING, - /* - * There was event pending but before user space handled it - * some other event was introduced which canceled existing - * setup. If this state is set read/write on ep0 return - * -EIDRM. This state is only set when adding event. - */ - FFS_SETUP_CANCELED -}; - - - -struct ffs_epfile; -struct ffs_function; - -struct ffs_data { - struct usb_gadget *gadget; - - /* - * Protect access read/write operations, only one read/write - * at a time. As a consequence protects ep0req and company. - * While setup request is being processed (queued) this is - * held. - */ - struct mutex mutex; - - /* - * Protect access to endpoint related structures (basically - * usb_ep_queue(), usb_ep_dequeue(), etc. calls) except for - * endpoint zero. - */ - spinlock_t eps_lock; - - /* - * XXX REVISIT do we need our own request? Since we are not - * handling setup requests immediately user space may be so - * slow that another setup will be sent to the gadget but this - * time not to us but another function and then there could be - * a race. Is that the case? Or maybe we can use cdev->req - * after all, maybe we just need some spinlock for that? - */ - struct usb_request *ep0req; /* P: mutex */ - struct completion ep0req_completion; /* P: mutex */ - int ep0req_status; /* P: mutex */ - - /* reference counter */ - atomic_t ref; - /* how many files are opened (EP0 and others) */ - atomic_t opened; - - /* EP0 state */ - enum ffs_state state; - - /* - * Possible transitions: - * + FFS_NO_SETUP -> FFS_SETUP_PENDING -- P: ev.waitq.lock - * happens only in ep0 read which is P: mutex - * + FFS_SETUP_PENDING -> FFS_NO_SETUP -- P: ev.waitq.lock - * happens only in ep0 i/o which is P: mutex - * + FFS_SETUP_PENDING -> FFS_SETUP_CANCELED -- P: ev.waitq.lock - * + FFS_SETUP_CANCELED -> FFS_NO_SETUP -- cmpxchg - */ - enum ffs_setup_state setup_state; - -#define FFS_SETUP_STATE(ffs) \ - ((enum ffs_setup_state)cmpxchg(&(ffs)->setup_state, \ - FFS_SETUP_CANCELED, FFS_NO_SETUP)) - - /* Events & such. */ - struct { - u8 types[4]; - unsigned short count; - /* XXX REVISIT need to update it in some places, or do we? */ - unsigned short can_stall; - struct usb_ctrlrequest setup; - - wait_queue_head_t waitq; - } ev; /* the whole structure, P: ev.waitq.lock */ - - /* Flags */ - unsigned long flags; -#define FFS_FL_CALL_CLOSED_CALLBACK 0 -#define FFS_FL_BOUND 1 - - /* Active function */ - struct ffs_function *func; - - /* - * Device name, write once when file system is mounted. - * Intended for user to read if she wants. - */ - const char *dev_name; - /* Private data for our user (ie. gadget). Managed by user. */ - void *private_data; - - /* filled by __ffs_data_got_descs() */ - /* - * Real descriptors are 16 bytes after raw_descs (so you need - * to skip 16 bytes (ie. ffs->raw_descs + 16) to get to the - * first full speed descriptor). raw_descs_length and - * raw_fs_descs_length do not have those 16 bytes added. - */ - const void *raw_descs; - unsigned raw_descs_length; - unsigned raw_fs_descs_length; - unsigned fs_descs_count; - unsigned hs_descs_count; - - unsigned short strings_count; - unsigned short interfaces_count; - unsigned short eps_count; - unsigned short _pad1; - - /* filled by __ffs_data_got_strings() */ - /* ids in stringtabs are set in functionfs_bind() */ - const void *raw_strings; - struct usb_gadget_strings **stringtabs; - - /* - * File system's super block, write once when file system is - * mounted. - */ - struct super_block *sb; - - /* File permissions, written once when fs is mounted */ - struct ffs_file_perms { - umode_t mode; - uid_t uid; - gid_t gid; - } file_perms; - - /* - * The endpoint files, filled by ffs_epfiles_create(), - * destroyed by ffs_epfiles_destroy(). - */ - struct ffs_epfile *epfiles; -}; - -/* Reference counter handling */ -static void ffs_data_get(struct ffs_data *ffs); -static void ffs_data_put(struct ffs_data *ffs); -/* Creates new ffs_data object. */ -static struct ffs_data *__must_check ffs_data_new(void) __attribute__((malloc)); - -/* Opened counter handling. */ -static void ffs_data_opened(struct ffs_data *ffs); -static void ffs_data_closed(struct ffs_data *ffs); - -/* Called with ffs->mutex held; take over ownership of data. */ -static int __must_check -__ffs_data_got_descs(struct ffs_data *ffs, char *data, size_t len); -static int __must_check -__ffs_data_got_strings(struct ffs_data *ffs, char *data, size_t len); - - -/* The function structure ***************************************************/ - -struct ffs_ep; - -struct ffs_function { - struct usb_configuration *conf; - struct usb_gadget *gadget; - struct ffs_data *ffs; - - struct ffs_ep *eps; - u8 eps_revmap[16]; - short *interfaces_nums; - - struct usb_function function; -}; - - -static struct ffs_function *ffs_func_from_usb(struct usb_function *f) -{ - return container_of(f, struct ffs_function, function); -} - -static void ffs_func_free(struct ffs_function *func); - -static void ffs_func_eps_disable(struct ffs_function *func); -static int __must_check ffs_func_eps_enable(struct ffs_function *func); - -static int ffs_func_bind(struct usb_configuration *, - struct usb_function *); -static void ffs_func_unbind(struct usb_configuration *, - struct usb_function *); -static int ffs_func_set_alt(struct usb_function *, unsigned, unsigned); -static void ffs_func_disable(struct usb_function *); -static int ffs_func_setup(struct usb_function *, - const struct usb_ctrlrequest *); -static void ffs_func_suspend(struct usb_function *); -static void ffs_func_resume(struct usb_function *); - - -static int ffs_func_revmap_ep(struct ffs_function *func, u8 num); -static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf); - - -/* The endpoints structures *************************************************/ - -struct ffs_ep { - struct usb_ep *ep; /* P: ffs->eps_lock */ - struct usb_request *req; /* P: epfile->mutex */ - - /* [0]: full speed, [1]: high speed */ - struct usb_endpoint_descriptor *descs[2]; - - u8 num; - - int status; /* P: epfile->mutex */ -}; - -struct ffs_epfile { - /* Protects ep->ep and ep->req. */ - struct mutex mutex; - wait_queue_head_t wait; - - struct ffs_data *ffs; - struct ffs_ep *ep; /* P: ffs->eps_lock */ - - struct dentry *dentry; - - char name[5]; - - unsigned char in; /* P: ffs->eps_lock */ - unsigned char isoc; /* P: ffs->eps_lock */ - - unsigned char _pad; -}; - -static int __must_check ffs_epfiles_create(struct ffs_data *ffs); -static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count); - -static struct inode *__must_check -ffs_sb_create_file(struct super_block *sb, const char *name, void *data, - const struct file_operations *fops, - struct dentry **dentry_p); - - -/* Misc helper functions ****************************************************/ - -static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock) - __attribute__((warn_unused_result, nonnull)); -static char *ffs_prepare_buffer(const char * __user buf, size_t len) - __attribute__((warn_unused_result, nonnull)); - - -/* Control file aka ep0 *****************************************************/ - -static void ffs_ep0_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct ffs_data *ffs = req->context; - - complete_all(&ffs->ep0req_completion); -} - -static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len) -{ - struct usb_request *req = ffs->ep0req; - int ret; - - req->zero = len < le16_to_cpu(ffs->ev.setup.wLength); - - spin_unlock_irq(&ffs->ev.waitq.lock); - - req->buf = data; - req->length = len; - - /* - * UDC layer requires to provide a buffer even for ZLP, but should - * not use it at all. Let's provide some poisoned pointer to catch - * possible bug in the driver. - */ - if (req->buf == NULL) - req->buf = (void *)0xDEADBABE; - - INIT_COMPLETION(ffs->ep0req_completion); - - ret = usb_ep_queue(ffs->gadget->ep0, req, GFP_ATOMIC); - if (unlikely(ret < 0)) - return ret; - - ret = wait_for_completion_interruptible(&ffs->ep0req_completion); - if (unlikely(ret)) { - usb_ep_dequeue(ffs->gadget->ep0, req); - return -EINTR; - } - - ffs->setup_state = FFS_NO_SETUP; - return ffs->ep0req_status; -} - -static int __ffs_ep0_stall(struct ffs_data *ffs) -{ - if (ffs->ev.can_stall) { - pr_vdebug("ep0 stall\n"); - usb_ep_set_halt(ffs->gadget->ep0); - ffs->setup_state = FFS_NO_SETUP; - return -EL2HLT; - } else { - pr_debug("bogus ep0 stall!\n"); - return -ESRCH; - } -} - -static ssize_t ffs_ep0_write(struct file *file, const char __user *buf, - size_t len, loff_t *ptr) -{ - struct ffs_data *ffs = file->private_data; - ssize_t ret; - char *data; - - ENTER(); - - /* Fast check if setup was canceled */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) - return -EIDRM; - - /* Acquire mutex */ - ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK); - if (unlikely(ret < 0)) - return ret; - - /* Check state */ - switch (ffs->state) { - case FFS_READ_DESCRIPTORS: - case FFS_READ_STRINGS: - /* Copy data */ - if (unlikely(len < 16)) { - ret = -EINVAL; - break; - } - - data = ffs_prepare_buffer(buf, len); - if (IS_ERR(data)) { - ret = PTR_ERR(data); - break; - } - - /* Handle data */ - if (ffs->state == FFS_READ_DESCRIPTORS) { - pr_info("read descriptors\n"); - ret = __ffs_data_got_descs(ffs, data, len); - if (unlikely(ret < 0)) - break; - - ffs->state = FFS_READ_STRINGS; - ret = len; - } else { - pr_info("read strings\n"); - ret = __ffs_data_got_strings(ffs, data, len); - if (unlikely(ret < 0)) - break; - - ret = ffs_epfiles_create(ffs); - if (unlikely(ret)) { - ffs->state = FFS_CLOSING; - break; - } - - ffs->state = FFS_ACTIVE; - mutex_unlock(&ffs->mutex); - - ret = functionfs_ready_callback(ffs); - if (unlikely(ret < 0)) { - ffs->state = FFS_CLOSING; - return ret; - } - - set_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags); - return len; - } - break; - - case FFS_ACTIVE: - data = NULL; - /* - * We're called from user space, we can use _irq - * rather then _irqsave - */ - spin_lock_irq(&ffs->ev.waitq.lock); - switch (FFS_SETUP_STATE(ffs)) { - case FFS_SETUP_CANCELED: - ret = -EIDRM; - goto done_spin; - - case FFS_NO_SETUP: - ret = -ESRCH; - goto done_spin; - - case FFS_SETUP_PENDING: - break; - } - - /* FFS_SETUP_PENDING */ - if (!(ffs->ev.setup.bRequestType & USB_DIR_IN)) { - spin_unlock_irq(&ffs->ev.waitq.lock); - ret = __ffs_ep0_stall(ffs); - break; - } - - /* FFS_SETUP_PENDING and not stall */ - len = min(len, (size_t)le16_to_cpu(ffs->ev.setup.wLength)); - - spin_unlock_irq(&ffs->ev.waitq.lock); - - data = ffs_prepare_buffer(buf, len); - if (IS_ERR(data)) { - ret = PTR_ERR(data); - break; - } - - spin_lock_irq(&ffs->ev.waitq.lock); - - /* - * We are guaranteed to be still in FFS_ACTIVE state - * but the state of setup could have changed from - * FFS_SETUP_PENDING to FFS_SETUP_CANCELED so we need - * to check for that. If that happened we copied data - * from user space in vain but it's unlikely. - * - * For sure we are not in FFS_NO_SETUP since this is - * the only place FFS_SETUP_PENDING -> FFS_NO_SETUP - * transition can be performed and it's protected by - * mutex. - */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) { - ret = -EIDRM; -done_spin: - spin_unlock_irq(&ffs->ev.waitq.lock); - } else { - /* unlocks spinlock */ - ret = __ffs_ep0_queue_wait(ffs, data, len); - } - kfree(data); - break; - - default: - ret = -EBADFD; - break; - } - - mutex_unlock(&ffs->mutex); - return ret; -} - -static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf, - size_t n) -{ - /* - * We are holding ffs->ev.waitq.lock and ffs->mutex and we need - * to release them. - */ - struct usb_functionfs_event events[n]; - unsigned i = 0; - - memset(events, 0, sizeof events); - - do { - events[i].type = ffs->ev.types[i]; - if (events[i].type == FUNCTIONFS_SETUP) { - events[i].u.setup = ffs->ev.setup; - ffs->setup_state = FFS_SETUP_PENDING; - } - } while (++i < n); - - if (n < ffs->ev.count) { - ffs->ev.count -= n; - memmove(ffs->ev.types, ffs->ev.types + n, - ffs->ev.count * sizeof *ffs->ev.types); - } else { - ffs->ev.count = 0; - } - - spin_unlock_irq(&ffs->ev.waitq.lock); - mutex_unlock(&ffs->mutex); - - return unlikely(__copy_to_user(buf, events, sizeof events)) - ? -EFAULT : sizeof events; -} - -static ssize_t ffs_ep0_read(struct file *file, char __user *buf, - size_t len, loff_t *ptr) -{ - struct ffs_data *ffs = file->private_data; - char *data = NULL; - size_t n; - int ret; - - ENTER(); - - /* Fast check if setup was canceled */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) - return -EIDRM; - - /* Acquire mutex */ - ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK); - if (unlikely(ret < 0)) - return ret; - - /* Check state */ - if (ffs->state != FFS_ACTIVE) { - ret = -EBADFD; - goto done_mutex; - } - - /* - * We're called from user space, we can use _irq rather then - * _irqsave - */ - spin_lock_irq(&ffs->ev.waitq.lock); - - switch (FFS_SETUP_STATE(ffs)) { - case FFS_SETUP_CANCELED: - ret = -EIDRM; - break; - - case FFS_NO_SETUP: - n = len / sizeof(struct usb_functionfs_event); - if (unlikely(!n)) { - ret = -EINVAL; - break; - } - - if ((file->f_flags & O_NONBLOCK) && !ffs->ev.count) { - ret = -EAGAIN; - break; - } - - if (wait_event_interruptible_exclusive_locked_irq(ffs->ev.waitq, - ffs->ev.count)) { - ret = -EINTR; - break; - } - - return __ffs_ep0_read_events(ffs, buf, - min(n, (size_t)ffs->ev.count)); - - case FFS_SETUP_PENDING: - if (ffs->ev.setup.bRequestType & USB_DIR_IN) { - spin_unlock_irq(&ffs->ev.waitq.lock); - ret = __ffs_ep0_stall(ffs); - goto done_mutex; - } - - len = min(len, (size_t)le16_to_cpu(ffs->ev.setup.wLength)); - - spin_unlock_irq(&ffs->ev.waitq.lock); - - if (likely(len)) { - data = kmalloc(len, GFP_KERNEL); - if (unlikely(!data)) { - ret = -ENOMEM; - goto done_mutex; - } - } - - spin_lock_irq(&ffs->ev.waitq.lock); - - /* See ffs_ep0_write() */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) { - ret = -EIDRM; - break; - } - - /* unlocks spinlock */ - ret = __ffs_ep0_queue_wait(ffs, data, len); - if (likely(ret > 0) && unlikely(__copy_to_user(buf, data, len))) - ret = -EFAULT; - goto done_mutex; - - default: - ret = -EBADFD; - break; - } - - spin_unlock_irq(&ffs->ev.waitq.lock); -done_mutex: - mutex_unlock(&ffs->mutex); - kfree(data); - return ret; -} - -static int ffs_ep0_open(struct inode *inode, struct file *file) -{ - struct ffs_data *ffs = inode->i_private; - - ENTER(); - - if (unlikely(ffs->state == FFS_CLOSING)) - return -EBUSY; - - file->private_data = ffs; - ffs_data_opened(ffs); - - return 0; -} - -static int ffs_ep0_release(struct inode *inode, struct file *file) -{ - struct ffs_data *ffs = file->private_data; - - ENTER(); - - ffs_data_closed(ffs); - - return 0; -} - -static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value) -{ - struct ffs_data *ffs = file->private_data; - struct usb_gadget *gadget = ffs->gadget; - long ret; - - ENTER(); - - if (code == FUNCTIONFS_INTERFACE_REVMAP) { - struct ffs_function *func = ffs->func; - ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV; - } else if (gadget && gadget->ops->ioctl) { - ret = gadget->ops->ioctl(gadget, code, value); - } else { - ret = -ENOTTY; - } - - return ret; -} - -static const struct file_operations ffs_ep0_operations = { - .owner = THIS_MODULE, - .llseek = no_llseek, - - .open = ffs_ep0_open, - .write = ffs_ep0_write, - .read = ffs_ep0_read, - .release = ffs_ep0_release, - .unlocked_ioctl = ffs_ep0_ioctl, -}; - - -/* "Normal" endpoints operations ********************************************/ - -static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req) -{ - ENTER(); - if (likely(req->context)) { - struct ffs_ep *ep = _ep->driver_data; - ep->status = req->status ? req->status : req->actual; - complete(req->context); - } -} - -static ssize_t ffs_epfile_io(struct file *file, - char __user *buf, size_t len, int read) -{ - struct ffs_epfile *epfile = file->private_data; - struct ffs_ep *ep; - char *data = NULL; - ssize_t ret; - int halt; - - goto first_try; - do { - spin_unlock_irq(&epfile->ffs->eps_lock); - mutex_unlock(&epfile->mutex); - -first_try: - /* Are we still active? */ - if (WARN_ON(epfile->ffs->state != FFS_ACTIVE)) { - ret = -ENODEV; - goto error; - } - - /* Wait for endpoint to be enabled */ - ep = epfile->ep; - if (!ep) { - if (file->f_flags & O_NONBLOCK) { - ret = -EAGAIN; - goto error; - } - - if (wait_event_interruptible(epfile->wait, - (ep = epfile->ep))) { - ret = -EINTR; - goto error; - } - } - - /* Do we halt? */ - halt = !read == !epfile->in; - if (halt && epfile->isoc) { - ret = -EINVAL; - goto error; - } - - /* Allocate & copy */ - if (!halt && !data) { - data = kzalloc(len, GFP_KERNEL); - if (unlikely(!data)) - return -ENOMEM; - - if (!read && - unlikely(__copy_from_user(data, buf, len))) { - ret = -EFAULT; - goto error; - } - } - - /* We will be using request */ - ret = ffs_mutex_lock(&epfile->mutex, - file->f_flags & O_NONBLOCK); - if (unlikely(ret)) - goto error; - - /* - * We're called from user space, we can use _irq rather then - * _irqsave - */ - spin_lock_irq(&epfile->ffs->eps_lock); - - /* - * While we were acquiring mutex endpoint got disabled - * or changed? - */ - } while (unlikely(epfile->ep != ep)); - - /* Halt */ - if (unlikely(halt)) { - if (likely(epfile->ep == ep) && !WARN_ON(!ep->ep)) - usb_ep_set_halt(ep->ep); - spin_unlock_irq(&epfile->ffs->eps_lock); - ret = -EBADMSG; - } else { - /* Fire the request */ - DECLARE_COMPLETION_ONSTACK(done); - - struct usb_request *req = ep->req; - req->context = &done; - req->complete = ffs_epfile_io_complete; - req->buf = data; - req->length = len; - - ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC); - - spin_unlock_irq(&epfile->ffs->eps_lock); - - if (unlikely(ret < 0)) { - /* nop */ - } else if (unlikely(wait_for_completion_interruptible(&done))) { - ret = -EINTR; - usb_ep_dequeue(ep->ep, req); - } else { - ret = ep->status; - if (read && ret > 0 && - unlikely(copy_to_user(buf, data, ret))) - ret = -EFAULT; - } - } - - mutex_unlock(&epfile->mutex); -error: - kfree(data); - return ret; -} - -static ssize_t -ffs_epfile_write(struct file *file, const char __user *buf, size_t len, - loff_t *ptr) -{ - ENTER(); - - return ffs_epfile_io(file, (char __user *)buf, len, 0); -} - -static ssize_t -ffs_epfile_read(struct file *file, char __user *buf, size_t len, loff_t *ptr) -{ - ENTER(); - - return ffs_epfile_io(file, buf, len, 1); -} - -static int -ffs_epfile_open(struct inode *inode, struct file *file) -{ - struct ffs_epfile *epfile = inode->i_private; - - ENTER(); - - if (WARN_ON(epfile->ffs->state != FFS_ACTIVE)) - return -ENODEV; - - file->private_data = epfile; - ffs_data_opened(epfile->ffs); - - return 0; -} - -static int -ffs_epfile_release(struct inode *inode, struct file *file) -{ - struct ffs_epfile *epfile = inode->i_private; - - ENTER(); - - ffs_data_closed(epfile->ffs); - - return 0; -} - -static long ffs_epfile_ioctl(struct file *file, unsigned code, - unsigned long value) -{ - struct ffs_epfile *epfile = file->private_data; - int ret; - - ENTER(); - - if (WARN_ON(epfile->ffs->state != FFS_ACTIVE)) - return -ENODEV; - - spin_lock_irq(&epfile->ffs->eps_lock); - if (likely(epfile->ep)) { - switch (code) { - case FUNCTIONFS_FIFO_STATUS: - ret = usb_ep_fifo_status(epfile->ep->ep); - break; - case FUNCTIONFS_FIFO_FLUSH: - usb_ep_fifo_flush(epfile->ep->ep); - ret = 0; - break; - case FUNCTIONFS_CLEAR_HALT: - ret = usb_ep_clear_halt(epfile->ep->ep); - break; - case FUNCTIONFS_ENDPOINT_REVMAP: - ret = epfile->ep->num; - break; - default: - ret = -ENOTTY; - } - } else { - ret = -ENODEV; - } - spin_unlock_irq(&epfile->ffs->eps_lock); - - return ret; -} - -static const struct file_operations ffs_epfile_operations = { - .owner = THIS_MODULE, - .llseek = no_llseek, - - .open = ffs_epfile_open, - .write = ffs_epfile_write, - .read = ffs_epfile_read, - .release = ffs_epfile_release, - .unlocked_ioctl = ffs_epfile_ioctl, -}; - - -/* File system and super block operations ***********************************/ - -/* - * Mounting the file system creates a controller file, used first for - * function configuration then later for event monitoring. - */ - -static struct inode *__must_check -ffs_sb_make_inode(struct super_block *sb, void *data, - const struct file_operations *fops, - const struct inode_operations *iops, - struct ffs_file_perms *perms) -{ - struct inode *inode; - - ENTER(); - - inode = new_inode(sb); - - if (likely(inode)) { - struct timespec current_time = CURRENT_TIME; - - inode->i_ino = get_next_ino(); - inode->i_mode = perms->mode; - inode->i_uid = perms->uid; - inode->i_gid = perms->gid; - inode->i_atime = current_time; - inode->i_mtime = current_time; - inode->i_ctime = current_time; - inode->i_private = data; - if (fops) - inode->i_fop = fops; - if (iops) - inode->i_op = iops; - } - - return inode; -} - -/* Create "regular" file */ -static struct inode *ffs_sb_create_file(struct super_block *sb, - const char *name, void *data, - const struct file_operations *fops, - struct dentry **dentry_p) -{ - struct ffs_data *ffs = sb->s_fs_info; - struct dentry *dentry; - struct inode *inode; - - ENTER(); - - dentry = d_alloc_name(sb->s_root, name); - if (unlikely(!dentry)) - return NULL; - - inode = ffs_sb_make_inode(sb, data, fops, NULL, &ffs->file_perms); - if (unlikely(!inode)) { - dput(dentry); - return NULL; - } - - d_add(dentry, inode); - if (dentry_p) - *dentry_p = dentry; - - return inode; -} - -/* Super block */ -static const struct super_operations ffs_sb_operations = { - .statfs = simple_statfs, - .drop_inode = generic_delete_inode, -}; - -struct ffs_sb_fill_data { - struct ffs_file_perms perms; - umode_t root_mode; - const char *dev_name; - union { - /* set by ffs_fs_mount(), read by ffs_sb_fill() */ - void *private_data; - /* set by ffs_sb_fill(), read by ffs_fs_mount */ - struct ffs_data *ffs_data; - }; -}; - -static int ffs_sb_fill(struct super_block *sb, void *_data, int silent) -{ - struct ffs_sb_fill_data *data = _data; - struct inode *inode; - struct ffs_data *ffs; - - ENTER(); - - /* Initialise data */ - ffs = ffs_data_new(); - if (unlikely(!ffs)) - goto Enomem; - - ffs->sb = sb; - ffs->dev_name = kstrdup(data->dev_name, GFP_KERNEL); - if (unlikely(!ffs->dev_name)) - goto Enomem; - ffs->file_perms = data->perms; - ffs->private_data = data->private_data; - - /* used by the caller of this function */ - data->ffs_data = ffs; - - sb->s_fs_info = ffs; - sb->s_blocksize = PAGE_CACHE_SIZE; - sb->s_blocksize_bits = PAGE_CACHE_SHIFT; - sb->s_magic = FUNCTIONFS_MAGIC; - sb->s_op = &ffs_sb_operations; - sb->s_time_gran = 1; - - /* Root inode */ - data->perms.mode = data->root_mode; - inode = ffs_sb_make_inode(sb, NULL, - &simple_dir_operations, - &simple_dir_inode_operations, - &data->perms); - sb->s_root = d_make_root(inode); - if (unlikely(!sb->s_root)) - goto Enomem; - - /* EP0 file */ - if (unlikely(!ffs_sb_create_file(sb, "ep0", ffs, - &ffs_ep0_operations, NULL))) - goto Enomem; - - return 0; - -Enomem: - return -ENOMEM; -} - -static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts) -{ - ENTER(); - - if (!opts || !*opts) - return 0; - - for (;;) { - char *end, *eq, *comma; - unsigned long value; - - /* Option limit */ - comma = strchr(opts, ','); - if (comma) - *comma = 0; - - /* Value limit */ - eq = strchr(opts, '='); - if (unlikely(!eq)) { - pr_err("'=' missing in %s\n", opts); - return -EINVAL; - } - *eq = 0; - - /* Parse value */ - value = simple_strtoul(eq + 1, &end, 0); - if (unlikely(*end != ',' && *end != 0)) { - pr_err("%s: invalid value: %s\n", opts, eq + 1); - return -EINVAL; - } - - /* Interpret option */ - switch (eq - opts) { - case 5: - if (!memcmp(opts, "rmode", 5)) - data->root_mode = (value & 0555) | S_IFDIR; - else if (!memcmp(opts, "fmode", 5)) - data->perms.mode = (value & 0666) | S_IFREG; - else - goto invalid; - break; - - case 4: - if (!memcmp(opts, "mode", 4)) { - data->root_mode = (value & 0555) | S_IFDIR; - data->perms.mode = (value & 0666) | S_IFREG; - } else { - goto invalid; - } - break; - - case 3: - if (!memcmp(opts, "uid", 3)) - data->perms.uid = value; - else if (!memcmp(opts, "gid", 3)) - data->perms.gid = value; - else - goto invalid; - break; - - default: -invalid: - pr_err("%s: invalid option\n", opts); - return -EINVAL; - } - - /* Next iteration */ - if (!comma) - break; - opts = comma + 1; - } - - return 0; -} - -/* "mount -t functionfs dev_name /dev/function" ends up here */ - -static struct dentry * -ffs_fs_mount(struct file_system_type *t, int flags, - const char *dev_name, void *opts) -{ - struct ffs_sb_fill_data data = { - .perms = { - .mode = S_IFREG | 0600, - .uid = 0, - .gid = 0 - }, - .root_mode = S_IFDIR | 0500, - }; - struct dentry *rv; - int ret; - void *ffs_dev; - - ENTER(); - - ret = ffs_fs_parse_opts(&data, opts); - if (unlikely(ret < 0)) - return ERR_PTR(ret); - - ffs_dev = functionfs_acquire_dev_callback(dev_name); - if (IS_ERR(ffs_dev)) - return ffs_dev; - - data.dev_name = dev_name; - data.private_data = ffs_dev; - rv = mount_nodev(t, flags, &data, ffs_sb_fill); - - /* data.ffs_data is set by ffs_sb_fill */ - if (IS_ERR(rv)) - functionfs_release_dev_callback(data.ffs_data); - - return rv; -} - -static void -ffs_fs_kill_sb(struct super_block *sb) -{ - ENTER(); - - kill_litter_super(sb); - if (sb->s_fs_info) { - functionfs_release_dev_callback(sb->s_fs_info); - ffs_data_put(sb->s_fs_info); - } -} - -static struct file_system_type ffs_fs_type = { - .owner = THIS_MODULE, - .name = "functionfs", - .mount = ffs_fs_mount, - .kill_sb = ffs_fs_kill_sb, -}; - - -/* Driver's main init/cleanup functions *************************************/ - -static int functionfs_init(void) -{ - int ret; - - ENTER(); - - ret = register_filesystem(&ffs_fs_type); - if (likely(!ret)) - pr_info("file system registered\n"); - else - pr_err("failed registering file system (%d)\n", ret); - - return ret; -} - -static void functionfs_cleanup(void) -{ - ENTER(); - - pr_info("unloading\n"); - unregister_filesystem(&ffs_fs_type); -} - - -/* ffs_data and ffs_function construction and destruction code **************/ - -static void ffs_data_clear(struct ffs_data *ffs); -static void ffs_data_reset(struct ffs_data *ffs); - -static void ffs_data_get(struct ffs_data *ffs) -{ - ENTER(); - - atomic_inc(&ffs->ref); -} - -static void ffs_data_opened(struct ffs_data *ffs) -{ - ENTER(); - - atomic_inc(&ffs->ref); - atomic_inc(&ffs->opened); -} - -static void ffs_data_put(struct ffs_data *ffs) -{ - ENTER(); - - if (unlikely(atomic_dec_and_test(&ffs->ref))) { - pr_info("%s(): freeing\n", __func__); - ffs_data_clear(ffs); - BUG_ON(waitqueue_active(&ffs->ev.waitq) || - waitqueue_active(&ffs->ep0req_completion.wait)); - kfree(ffs->dev_name); - kfree(ffs); - } -} - -static void ffs_data_closed(struct ffs_data *ffs) -{ - ENTER(); - - if (atomic_dec_and_test(&ffs->opened)) { - ffs->state = FFS_CLOSING; - ffs_data_reset(ffs); - } - - ffs_data_put(ffs); -} - -static struct ffs_data *ffs_data_new(void) -{ - struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL); - if (unlikely(!ffs)) - return 0; - - ENTER(); - - atomic_set(&ffs->ref, 1); - atomic_set(&ffs->opened, 0); - ffs->state = FFS_READ_DESCRIPTORS; - mutex_init(&ffs->mutex); - spin_lock_init(&ffs->eps_lock); - init_waitqueue_head(&ffs->ev.waitq); - init_completion(&ffs->ep0req_completion); - - /* XXX REVISIT need to update it in some places, or do we? */ - ffs->ev.can_stall = 1; - - return ffs; -} - -static void ffs_data_clear(struct ffs_data *ffs) -{ - ENTER(); - - if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags)) - functionfs_closed_callback(ffs); - - BUG_ON(ffs->gadget); - - if (ffs->epfiles) - ffs_epfiles_destroy(ffs->epfiles, ffs->eps_count); - - kfree(ffs->raw_descs); - kfree(ffs->raw_strings); - kfree(ffs->stringtabs); -} - -static void ffs_data_reset(struct ffs_data *ffs) -{ - ENTER(); - - ffs_data_clear(ffs); - - ffs->epfiles = NULL; - ffs->raw_descs = NULL; - ffs->raw_strings = NULL; - ffs->stringtabs = NULL; - - ffs->raw_descs_length = 0; - ffs->raw_fs_descs_length = 0; - ffs->fs_descs_count = 0; - ffs->hs_descs_count = 0; - - ffs->strings_count = 0; - ffs->interfaces_count = 0; - ffs->eps_count = 0; - - ffs->ev.count = 0; - - ffs->state = FFS_READ_DESCRIPTORS; - ffs->setup_state = FFS_NO_SETUP; - ffs->flags = 0; -} - - -static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev) -{ - struct usb_gadget_strings **lang; - int first_id; - - ENTER(); - - if (WARN_ON(ffs->state != FFS_ACTIVE - || test_and_set_bit(FFS_FL_BOUND, &ffs->flags))) - return -EBADFD; - - first_id = usb_string_ids_n(cdev, ffs->strings_count); - if (unlikely(first_id < 0)) - return first_id; - - ffs->ep0req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL); - if (unlikely(!ffs->ep0req)) - return -ENOMEM; - ffs->ep0req->complete = ffs_ep0_complete; - ffs->ep0req->context = ffs; - - lang = ffs->stringtabs; - for (lang = ffs->stringtabs; *lang; ++lang) { - struct usb_string *str = (*lang)->strings; - int id = first_id; - for (; str->s; ++id, ++str) - str->id = id; - } - - ffs->gadget = cdev->gadget; - ffs_data_get(ffs); - return 0; -} - -static void functionfs_unbind(struct ffs_data *ffs) -{ - ENTER(); - - if (!WARN_ON(!ffs->gadget)) { - usb_ep_free_request(ffs->gadget->ep0, ffs->ep0req); - ffs->ep0req = NULL; - ffs->gadget = NULL; - ffs_data_put(ffs); - clear_bit(FFS_FL_BOUND, &ffs->flags); - } -} - -static int ffs_epfiles_create(struct ffs_data *ffs) -{ - struct ffs_epfile *epfile, *epfiles; - unsigned i, count; - - ENTER(); - - count = ffs->eps_count; - epfiles = kcalloc(count, sizeof(*epfiles), GFP_KERNEL); - if (!epfiles) - return -ENOMEM; - - epfile = epfiles; - for (i = 1; i <= count; ++i, ++epfile) { - epfile->ffs = ffs; - mutex_init(&epfile->mutex); - init_waitqueue_head(&epfile->wait); - sprintf(epfiles->name, "ep%u", i); - if (!unlikely(ffs_sb_create_file(ffs->sb, epfiles->name, epfile, - &ffs_epfile_operations, - &epfile->dentry))) { - ffs_epfiles_destroy(epfiles, i - 1); - return -ENOMEM; - } - } - - ffs->epfiles = epfiles; - return 0; -} - -static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count) -{ - struct ffs_epfile *epfile = epfiles; - - ENTER(); - - for (; count; --count, ++epfile) { - BUG_ON(mutex_is_locked(&epfile->mutex) || - waitqueue_active(&epfile->wait)); - if (epfile->dentry) { - d_delete(epfile->dentry); - dput(epfile->dentry); - epfile->dentry = NULL; - } - } - - kfree(epfiles); -} - -static int functionfs_bind_config(struct usb_composite_dev *cdev, - struct usb_configuration *c, - struct ffs_data *ffs) -{ - struct ffs_function *func; - int ret; - - ENTER(); - - func = kzalloc(sizeof *func, GFP_KERNEL); - if (unlikely(!func)) - return -ENOMEM; - - func->function.name = "Function FS Gadget"; - func->function.strings = ffs->stringtabs; - - func->function.bind = ffs_func_bind; - func->function.unbind = ffs_func_unbind; - func->function.set_alt = ffs_func_set_alt; - func->function.disable = ffs_func_disable; - func->function.setup = ffs_func_setup; - func->function.suspend = ffs_func_suspend; - func->function.resume = ffs_func_resume; - - func->conf = c; - func->gadget = cdev->gadget; - func->ffs = ffs; - ffs_data_get(ffs); - - ret = usb_add_function(c, &func->function); - if (unlikely(ret)) - ffs_func_free(func); - - return ret; -} - -static void ffs_func_free(struct ffs_function *func) -{ - struct ffs_ep *ep = func->eps; - unsigned count = func->ffs->eps_count; - unsigned long flags; - - ENTER(); - - /* cleanup after autoconfig */ - spin_lock_irqsave(&func->ffs->eps_lock, flags); - do { - if (ep->ep && ep->req) - usb_ep_free_request(ep->ep, ep->req); - ep->req = NULL; - ++ep; - } while (--count); - spin_unlock_irqrestore(&func->ffs->eps_lock, flags); - - ffs_data_put(func->ffs); - - kfree(func->eps); - /* - * eps and interfaces_nums are allocated in the same chunk so - * only one free is required. Descriptors are also allocated - * in the same chunk. - */ - - kfree(func); -} - -static void ffs_func_eps_disable(struct ffs_function *func) -{ - struct ffs_ep *ep = func->eps; - struct ffs_epfile *epfile = func->ffs->epfiles; - unsigned count = func->ffs->eps_count; - unsigned long flags; - - spin_lock_irqsave(&func->ffs->eps_lock, flags); - do { - /* pending requests get nuked */ - if (likely(ep->ep)) - usb_ep_disable(ep->ep); - epfile->ep = NULL; - - ++ep; - ++epfile; - } while (--count); - spin_unlock_irqrestore(&func->ffs->eps_lock, flags); -} - -static int ffs_func_eps_enable(struct ffs_function *func) -{ - struct ffs_data *ffs = func->ffs; - struct ffs_ep *ep = func->eps; - struct ffs_epfile *epfile = ffs->epfiles; - unsigned count = ffs->eps_count; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&func->ffs->eps_lock, flags); - do { - struct usb_endpoint_descriptor *ds; - ds = ep->descs[ep->descs[1] ? 1 : 0]; - - ep->ep->driver_data = ep; - ep->ep->desc = ds; - ret = usb_ep_enable(ep->ep); - if (likely(!ret)) { - epfile->ep = ep; - epfile->in = usb_endpoint_dir_in(ds); - epfile->isoc = usb_endpoint_xfer_isoc(ds); - } else { - break; - } - - wake_up(&epfile->wait); - - ++ep; - ++epfile; - } while (--count); - spin_unlock_irqrestore(&func->ffs->eps_lock, flags); - - return ret; -} - - -/* Parsing and building descriptors and strings *****************************/ - -/* - * This validates if data pointed by data is a valid USB descriptor as - * well as record how many interfaces, endpoints and strings are - * required by given configuration. Returns address after the - * descriptor or NULL if data is invalid. - */ - -enum ffs_entity_type { - FFS_DESCRIPTOR, FFS_INTERFACE, FFS_STRING, FFS_ENDPOINT -}; - -typedef int (*ffs_entity_callback)(enum ffs_entity_type entity, - u8 *valuep, - struct usb_descriptor_header *desc, - void *priv); - -static int __must_check ffs_do_desc(char *data, unsigned len, - ffs_entity_callback entity, void *priv) -{ - struct usb_descriptor_header *_ds = (void *)data; - u8 length; - int ret; - - ENTER(); - - /* At least two bytes are required: length and type */ - if (len < 2) { - pr_vdebug("descriptor too short\n"); - return -EINVAL; - } - - /* If we have at least as many bytes as the descriptor takes? */ - length = _ds->bLength; - if (len < length) { - pr_vdebug("descriptor longer then available data\n"); - return -EINVAL; - } - -#define __entity_check_INTERFACE(val) 1 -#define __entity_check_STRING(val) (val) -#define __entity_check_ENDPOINT(val) ((val) & USB_ENDPOINT_NUMBER_MASK) -#define __entity(type, val) do { \ - pr_vdebug("entity " #type "(%02x)\n", (val)); \ - if (unlikely(!__entity_check_ ##type(val))) { \ - pr_vdebug("invalid entity's value\n"); \ - return -EINVAL; \ - } \ - ret = entity(FFS_ ##type, &val, _ds, priv); \ - if (unlikely(ret < 0)) { \ - pr_debug("entity " #type "(%02x); ret = %d\n", \ - (val), ret); \ - return ret; \ - } \ - } while (0) - - /* Parse descriptor depending on type. */ - switch (_ds->bDescriptorType) { - case USB_DT_DEVICE: - case USB_DT_CONFIG: - case USB_DT_STRING: - case USB_DT_DEVICE_QUALIFIER: - /* function can't have any of those */ - pr_vdebug("descriptor reserved for gadget: %d\n", - _ds->bDescriptorType); - return -EINVAL; - - case USB_DT_INTERFACE: { - struct usb_interface_descriptor *ds = (void *)_ds; - pr_vdebug("interface descriptor\n"); - if (length != sizeof *ds) - goto inv_length; - - __entity(INTERFACE, ds->bInterfaceNumber); - if (ds->iInterface) - __entity(STRING, ds->iInterface); - } - break; - - case USB_DT_ENDPOINT: { - struct usb_endpoint_descriptor *ds = (void *)_ds; - pr_vdebug("endpoint descriptor\n"); - if (length != USB_DT_ENDPOINT_SIZE && - length != USB_DT_ENDPOINT_AUDIO_SIZE) - goto inv_length; - __entity(ENDPOINT, ds->bEndpointAddress); - } - break; - - case HID_DT_HID: - pr_vdebug("hid descriptor\n"); - if (length != sizeof(struct hid_descriptor)) - goto inv_length; - break; - - case USB_DT_OTG: - if (length != sizeof(struct usb_otg_descriptor)) - goto inv_length; - break; - - case USB_DT_INTERFACE_ASSOCIATION: { - struct usb_interface_assoc_descriptor *ds = (void *)_ds; - pr_vdebug("interface association descriptor\n"); - if (length != sizeof *ds) - goto inv_length; - if (ds->iFunction) - __entity(STRING, ds->iFunction); - } - break; - - case USB_DT_OTHER_SPEED_CONFIG: - case USB_DT_INTERFACE_POWER: - case USB_DT_DEBUG: - case USB_DT_SECURITY: - case USB_DT_CS_RADIO_CONTROL: - /* TODO */ - pr_vdebug("unimplemented descriptor: %d\n", _ds->bDescriptorType); - return -EINVAL; - - default: - /* We should never be here */ - pr_vdebug("unknown descriptor: %d\n", _ds->bDescriptorType); - return -EINVAL; - -inv_length: - pr_vdebug("invalid length: %d (descriptor %d)\n", - _ds->bLength, _ds->bDescriptorType); - return -EINVAL; - } - -#undef __entity -#undef __entity_check_DESCRIPTOR -#undef __entity_check_INTERFACE -#undef __entity_check_STRING -#undef __entity_check_ENDPOINT - - return length; -} - -static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len, - ffs_entity_callback entity, void *priv) -{ - const unsigned _len = len; - unsigned long num = 0; - - ENTER(); - - for (;;) { - int ret; - - if (num == count) - data = NULL; - - /* Record "descriptor" entity */ - ret = entity(FFS_DESCRIPTOR, (u8 *)num, (void *)data, priv); - if (unlikely(ret < 0)) { - pr_debug("entity DESCRIPTOR(%02lx); ret = %d\n", - num, ret); - return ret; - } - - if (!data) - return _len - len; - - ret = ffs_do_desc(data, len, entity, priv); - if (unlikely(ret < 0)) { - pr_debug("%s returns %d\n", __func__, ret); - return ret; - } - - len -= ret; - data += ret; - ++num; - } -} - -static int __ffs_data_do_entity(enum ffs_entity_type type, - u8 *valuep, struct usb_descriptor_header *desc, - void *priv) -{ - struct ffs_data *ffs = priv; - - ENTER(); - - switch (type) { - case FFS_DESCRIPTOR: - break; - - case FFS_INTERFACE: - /* - * Interfaces are indexed from zero so if we - * encountered interface "n" then there are at least - * "n+1" interfaces. - */ - if (*valuep >= ffs->interfaces_count) - ffs->interfaces_count = *valuep + 1; - break; - - case FFS_STRING: - /* - * Strings are indexed from 1 (0 is magic ;) reserved - * for languages list or some such) - */ - if (*valuep > ffs->strings_count) - ffs->strings_count = *valuep; - break; - - case FFS_ENDPOINT: - /* Endpoints are indexed from 1 as well. */ - if ((*valuep & USB_ENDPOINT_NUMBER_MASK) > ffs->eps_count) - ffs->eps_count = (*valuep & USB_ENDPOINT_NUMBER_MASK); - break; - } - - return 0; -} - -static int __ffs_data_got_descs(struct ffs_data *ffs, - char *const _data, size_t len) -{ - unsigned fs_count, hs_count; - int fs_len, ret = -EINVAL; - char *data = _data; - - ENTER(); - - if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_DESCRIPTORS_MAGIC || - get_unaligned_le32(data + 4) != len)) - goto error; - fs_count = get_unaligned_le32(data + 8); - hs_count = get_unaligned_le32(data + 12); - - if (!fs_count && !hs_count) - goto einval; - - data += 16; - len -= 16; - - if (likely(fs_count)) { - fs_len = ffs_do_descs(fs_count, data, len, - __ffs_data_do_entity, ffs); - if (unlikely(fs_len < 0)) { - ret = fs_len; - goto error; - } - - data += fs_len; - len -= fs_len; - } else { - fs_len = 0; - } - - if (likely(hs_count)) { - ret = ffs_do_descs(hs_count, data, len, - __ffs_data_do_entity, ffs); - if (unlikely(ret < 0)) - goto error; - } else { - ret = 0; - } - - if (unlikely(len != ret)) - goto einval; - - ffs->raw_fs_descs_length = fs_len; - ffs->raw_descs_length = fs_len + ret; - ffs->raw_descs = _data; - ffs->fs_descs_count = fs_count; - ffs->hs_descs_count = hs_count; - - return 0; - -einval: - ret = -EINVAL; -error: - kfree(_data); - return ret; -} - -static int __ffs_data_got_strings(struct ffs_data *ffs, - char *const _data, size_t len) -{ - u32 str_count, needed_count, lang_count; - struct usb_gadget_strings **stringtabs, *t; - struct usb_string *strings, *s; - const char *data = _data; - - ENTER(); - - if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC || - get_unaligned_le32(data + 4) != len)) - goto error; - str_count = get_unaligned_le32(data + 8); - lang_count = get_unaligned_le32(data + 12); - - /* if one is zero the other must be zero */ - if (unlikely(!str_count != !lang_count)) - goto error; - - /* Do we have at least as many strings as descriptors need? */ - needed_count = ffs->strings_count; - if (unlikely(str_count < needed_count)) - goto error; - - /* - * If we don't need any strings just return and free all - * memory. - */ - if (!needed_count) { - kfree(_data); - return 0; - } - - /* Allocate everything in one chunk so there's less maintenance. */ - { - struct { - struct usb_gadget_strings *stringtabs[lang_count + 1]; - struct usb_gadget_strings stringtab[lang_count]; - struct usb_string strings[lang_count*(needed_count+1)]; - } *d; - unsigned i = 0; - - d = kmalloc(sizeof *d, GFP_KERNEL); - if (unlikely(!d)) { - kfree(_data); - return -ENOMEM; - } - - stringtabs = d->stringtabs; - t = d->stringtab; - i = lang_count; - do { - *stringtabs++ = t++; - } while (--i); - *stringtabs = NULL; - - stringtabs = d->stringtabs; - t = d->stringtab; - s = d->strings; - strings = s; - } - - /* For each language */ - data += 16; - len -= 16; - - do { /* lang_count > 0 so we can use do-while */ - unsigned needed = needed_count; - - if (unlikely(len < 3)) - goto error_free; - t->language = get_unaligned_le16(data); - t->strings = s; - ++t; - - data += 2; - len -= 2; - - /* For each string */ - do { /* str_count > 0 so we can use do-while */ - size_t length = strnlen(data, len); - - if (unlikely(length == len)) - goto error_free; - - /* - * User may provide more strings then we need, - * if that's the case we simply ignore the - * rest - */ - if (likely(needed)) { - /* - * s->id will be set while adding - * function to configuration so for - * now just leave garbage here. - */ - s->s = data; - --needed; - ++s; - } - - data += length + 1; - len -= length + 1; - } while (--str_count); - - s->id = 0; /* terminator */ - s->s = NULL; - ++s; - - } while (--lang_count); - - /* Some garbage left? */ - if (unlikely(len)) - goto error_free; - - /* Done! */ - ffs->stringtabs = stringtabs; - ffs->raw_strings = _data; - - return 0; - -error_free: - kfree(stringtabs); -error: - kfree(_data); - return -EINVAL; -} - - -/* Events handling and management *******************************************/ - -static void __ffs_event_add(struct ffs_data *ffs, - enum usb_functionfs_event_type type) -{ - enum usb_functionfs_event_type rem_type1, rem_type2 = type; - int neg = 0; - - /* - * Abort any unhandled setup - * - * We do not need to worry about some cmpxchg() changing value - * of ffs->setup_state without holding the lock because when - * state is FFS_SETUP_PENDING cmpxchg() in several places in - * the source does nothing. - */ - if (ffs->setup_state == FFS_SETUP_PENDING) - ffs->setup_state = FFS_SETUP_CANCELED; - - switch (type) { - case FUNCTIONFS_RESUME: - rem_type2 = FUNCTIONFS_SUSPEND; - /* FALL THROUGH */ - case FUNCTIONFS_SUSPEND: - case FUNCTIONFS_SETUP: - rem_type1 = type; - /* Discard all similar events */ - break; - - case FUNCTIONFS_BIND: - case FUNCTIONFS_UNBIND: - case FUNCTIONFS_DISABLE: - case FUNCTIONFS_ENABLE: - /* Discard everything other then power management. */ - rem_type1 = FUNCTIONFS_SUSPEND; - rem_type2 = FUNCTIONFS_RESUME; - neg = 1; - break; - - default: - BUG(); - } - - { - u8 *ev = ffs->ev.types, *out = ev; - unsigned n = ffs->ev.count; - for (; n; --n, ++ev) - if ((*ev == rem_type1 || *ev == rem_type2) == neg) - *out++ = *ev; - else - pr_vdebug("purging event %d\n", *ev); - ffs->ev.count = out - ffs->ev.types; - } - - pr_vdebug("adding event %d\n", type); - ffs->ev.types[ffs->ev.count++] = type; - wake_up_locked(&ffs->ev.waitq); -} - -static void ffs_event_add(struct ffs_data *ffs, - enum usb_functionfs_event_type type) -{ - unsigned long flags; - spin_lock_irqsave(&ffs->ev.waitq.lock, flags); - __ffs_event_add(ffs, type); - spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags); -} - - -/* Bind/unbind USB function hooks *******************************************/ - -static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep, - struct usb_descriptor_header *desc, - void *priv) -{ - struct usb_endpoint_descriptor *ds = (void *)desc; - struct ffs_function *func = priv; - struct ffs_ep *ffs_ep; - - /* - * If hs_descriptors is not NULL then we are reading hs - * descriptors now - */ - const int isHS = func->function.hs_descriptors != NULL; - unsigned idx; - - if (type != FFS_DESCRIPTOR) - return 0; - - if (isHS) - func->function.hs_descriptors[(long)valuep] = desc; - else - func->function.descriptors[(long)valuep] = desc; - - if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT) - return 0; - - idx = (ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) - 1; - ffs_ep = func->eps + idx; - - if (unlikely(ffs_ep->descs[isHS])) { - pr_vdebug("two %sspeed descriptors for EP %d\n", - isHS ? "high" : "full", - ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); - return -EINVAL; - } - ffs_ep->descs[isHS] = ds; - - ffs_dump_mem(": Original ep desc", ds, ds->bLength); - if (ffs_ep->ep) { - ds->bEndpointAddress = ffs_ep->descs[0]->bEndpointAddress; - if (!ds->wMaxPacketSize) - ds->wMaxPacketSize = ffs_ep->descs[0]->wMaxPacketSize; - } else { - struct usb_request *req; - struct usb_ep *ep; - - pr_vdebug("autoconfig\n"); - ep = usb_ep_autoconfig(func->gadget, ds); - if (unlikely(!ep)) - return -ENOTSUPP; - ep->driver_data = func->eps + idx; - - req = usb_ep_alloc_request(ep, GFP_KERNEL); - if (unlikely(!req)) - return -ENOMEM; - - ffs_ep->ep = ep; - ffs_ep->req = req; - func->eps_revmap[ds->bEndpointAddress & - USB_ENDPOINT_NUMBER_MASK] = idx + 1; - } - ffs_dump_mem(": Rewritten ep desc", ds, ds->bLength); - - return 0; -} - -static int __ffs_func_bind_do_nums(enum ffs_entity_type type, u8 *valuep, - struct usb_descriptor_header *desc, - void *priv) -{ - struct ffs_function *func = priv; - unsigned idx; - u8 newValue; - - switch (type) { - default: - case FFS_DESCRIPTOR: - /* Handled in previous pass by __ffs_func_bind_do_descs() */ - return 0; - - case FFS_INTERFACE: - idx = *valuep; - if (func->interfaces_nums[idx] < 0) { - int id = usb_interface_id(func->conf, &func->function); - if (unlikely(id < 0)) - return id; - func->interfaces_nums[idx] = id; - } - newValue = func->interfaces_nums[idx]; - break; - - case FFS_STRING: - /* String' IDs are allocated when fsf_data is bound to cdev */ - newValue = func->ffs->stringtabs[0]->strings[*valuep - 1].id; - break; - - case FFS_ENDPOINT: - /* - * USB_DT_ENDPOINT are handled in - * __ffs_func_bind_do_descs(). - */ - if (desc->bDescriptorType == USB_DT_ENDPOINT) - return 0; - - idx = (*valuep & USB_ENDPOINT_NUMBER_MASK) - 1; - if (unlikely(!func->eps[idx].ep)) - return -EINVAL; - - { - struct usb_endpoint_descriptor **descs; - descs = func->eps[idx].descs; - newValue = descs[descs[0] ? 0 : 1]->bEndpointAddress; - } - break; - } - - pr_vdebug("%02x -> %02x\n", *valuep, newValue); - *valuep = newValue; - return 0; -} - -static int ffs_func_bind(struct usb_configuration *c, - struct usb_function *f) -{ - struct ffs_function *func = ffs_func_from_usb(f); - struct ffs_data *ffs = func->ffs; - - const int full = !!func->ffs->fs_descs_count; - const int high = gadget_is_dualspeed(func->gadget) && - func->ffs->hs_descs_count; - - int ret; - - /* Make it a single chunk, less management later on */ - struct { - struct ffs_ep eps[ffs->eps_count]; - struct usb_descriptor_header - *fs_descs[full ? ffs->fs_descs_count + 1 : 0]; - struct usb_descriptor_header - *hs_descs[high ? ffs->hs_descs_count + 1 : 0]; - short inums[ffs->interfaces_count]; - char raw_descs[high ? ffs->raw_descs_length - : ffs->raw_fs_descs_length]; - } *data; - - ENTER(); - - /* Only high speed but not supported by gadget? */ - if (unlikely(!(full | high))) - return -ENOTSUPP; - - /* Allocate */ - data = kmalloc(sizeof *data, GFP_KERNEL); - if (unlikely(!data)) - return -ENOMEM; - - /* Zero */ - memset(data->eps, 0, sizeof data->eps); - memcpy(data->raw_descs, ffs->raw_descs + 16, sizeof data->raw_descs); - memset(data->inums, 0xff, sizeof data->inums); - for (ret = ffs->eps_count; ret; --ret) - data->eps[ret].num = -1; - - /* Save pointers */ - func->eps = data->eps; - func->interfaces_nums = data->inums; - - /* - * Go through all the endpoint descriptors and allocate - * endpoints first, so that later we can rewrite the endpoint - * numbers without worrying that it may be described later on. - */ - if (likely(full)) { - func->function.descriptors = data->fs_descs; - ret = ffs_do_descs(ffs->fs_descs_count, - data->raw_descs, - sizeof data->raw_descs, - __ffs_func_bind_do_descs, func); - if (unlikely(ret < 0)) - goto error; - } else { - ret = 0; - } - - if (likely(high)) { - func->function.hs_descriptors = data->hs_descs; - ret = ffs_do_descs(ffs->hs_descs_count, - data->raw_descs + ret, - (sizeof data->raw_descs) - ret, - __ffs_func_bind_do_descs, func); - } - - /* - * Now handle interface numbers allocation and interface and - * endpoint numbers rewriting. We can do that in one go - * now. - */ - ret = ffs_do_descs(ffs->fs_descs_count + - (high ? ffs->hs_descs_count : 0), - data->raw_descs, sizeof data->raw_descs, - __ffs_func_bind_do_nums, func); - if (unlikely(ret < 0)) - goto error; - - /* And we're done */ - ffs_event_add(ffs, FUNCTIONFS_BIND); - return 0; - -error: - /* XXX Do we need to release all claimed endpoints here? */ - return ret; -} - - -/* Other USB function hooks *************************************************/ - -static void ffs_func_unbind(struct usb_configuration *c, - struct usb_function *f) -{ - struct ffs_function *func = ffs_func_from_usb(f); - struct ffs_data *ffs = func->ffs; - - ENTER(); - - if (ffs->func == func) { - ffs_func_eps_disable(func); - ffs->func = NULL; - } - - ffs_event_add(ffs, FUNCTIONFS_UNBIND); - - ffs_func_free(func); -} - -static int ffs_func_set_alt(struct usb_function *f, - unsigned interface, unsigned alt) -{ - struct ffs_function *func = ffs_func_from_usb(f); - struct ffs_data *ffs = func->ffs; - int ret = 0, intf; - - if (alt != (unsigned)-1) { - intf = ffs_func_revmap_intf(func, interface); - if (unlikely(intf < 0)) - return intf; - } - - if (ffs->func) - ffs_func_eps_disable(ffs->func); - - if (ffs->state != FFS_ACTIVE) - return -ENODEV; - - if (alt == (unsigned)-1) { - ffs->func = NULL; - ffs_event_add(ffs, FUNCTIONFS_DISABLE); - return 0; - } - - ffs->func = func; - ret = ffs_func_eps_enable(func); - if (likely(ret >= 0)) - ffs_event_add(ffs, FUNCTIONFS_ENABLE); - return ret; -} - -static void ffs_func_disable(struct usb_function *f) -{ - ffs_func_set_alt(f, 0, (unsigned)-1); -} - -static int ffs_func_setup(struct usb_function *f, - const struct usb_ctrlrequest *creq) -{ - struct ffs_function *func = ffs_func_from_usb(f); - struct ffs_data *ffs = func->ffs; - unsigned long flags; - int ret; - - ENTER(); - - pr_vdebug("creq->bRequestType = %02x\n", creq->bRequestType); - pr_vdebug("creq->bRequest = %02x\n", creq->bRequest); - pr_vdebug("creq->wValue = %04x\n", le16_to_cpu(creq->wValue)); - pr_vdebug("creq->wIndex = %04x\n", le16_to_cpu(creq->wIndex)); - pr_vdebug("creq->wLength = %04x\n", le16_to_cpu(creq->wLength)); - - /* - * Most requests directed to interface go through here - * (notable exceptions are set/get interface) so we need to - * handle them. All other either handled by composite or - * passed to usb_configuration->setup() (if one is set). No - * matter, we will handle requests directed to endpoint here - * as well (as it's straightforward) but what to do with any - * other request? - */ - if (ffs->state != FFS_ACTIVE) - return -ENODEV; - - switch (creq->bRequestType & USB_RECIP_MASK) { - case USB_RECIP_INTERFACE: - ret = ffs_func_revmap_intf(func, le16_to_cpu(creq->wIndex)); - if (unlikely(ret < 0)) - return ret; - break; - - case USB_RECIP_ENDPOINT: - ret = ffs_func_revmap_ep(func, le16_to_cpu(creq->wIndex)); - if (unlikely(ret < 0)) - return ret; - break; - - default: - return -EOPNOTSUPP; - } - - spin_lock_irqsave(&ffs->ev.waitq.lock, flags); - ffs->ev.setup = *creq; - ffs->ev.setup.wIndex = cpu_to_le16(ret); - __ffs_event_add(ffs, FUNCTIONFS_SETUP); - spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags); - - return 0; -} - -static void ffs_func_suspend(struct usb_function *f) -{ - ENTER(); - ffs_event_add(ffs_func_from_usb(f)->ffs, FUNCTIONFS_SUSPEND); -} - -static void ffs_func_resume(struct usb_function *f) -{ - ENTER(); - ffs_event_add(ffs_func_from_usb(f)->ffs, FUNCTIONFS_RESUME); -} - - -/* Endpoint and interface numbers reverse mapping ***************************/ - -static int ffs_func_revmap_ep(struct ffs_function *func, u8 num) -{ - num = func->eps_revmap[num & USB_ENDPOINT_NUMBER_MASK]; - return num ? num : -EDOM; -} - -static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf) -{ - short *nums = func->interfaces_nums; - unsigned count = func->ffs->interfaces_count; - - for (; count; --count, ++nums) { - if (*nums >= 0 && *nums == intf) - return nums - func->interfaces_nums; - } - - return -EDOM; -} - - -/* Misc helper functions ****************************************************/ - -static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock) -{ - return nonblock - ? likely(mutex_trylock(mutex)) ? 0 : -EAGAIN - : mutex_lock_interruptible(mutex); -} - -static char *ffs_prepare_buffer(const char * __user buf, size_t len) -{ - char *data; - - if (unlikely(!len)) - return NULL; - - data = kmalloc(len, GFP_KERNEL); - if (unlikely(!data)) - return ERR_PTR(-ENOMEM); - - if (unlikely(__copy_from_user(data, buf, len))) { - kfree(data); - return ERR_PTR(-EFAULT); - } - - pr_vdebug("Buffer from user space:\n"); - ffs_dump_mem("", data, len); - - return data; -} diff --git a/drivers/staging/ccg/f_mass_storage.c b/drivers/staging/ccg/f_mass_storage.c deleted file mode 100644 index 20bc2b454ac..00000000000 --- a/drivers/staging/ccg/f_mass_storage.c +++ /dev/null @@ -1,3135 +0,0 @@ -/* - * f_mass_storage.c -- Mass Storage USB Composite Function - * - * Copyright (C) 2003-2008 Alan Stern - * Copyright (C) 2009 Samsung Electronics - * Author: Michal Nazarewicz - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * The Mass Storage Function acts as a USB Mass Storage device, - * appearing to the host as a disk drive or as a CD-ROM drive. In - * addition to providing an example of a genuinely useful composite - * function for a USB device, it also illustrates a technique of - * double-buffering for increased throughput. - * - * For more information about MSF and in particular its module - * parameters and sysfs interface read the - * file. - */ - -/* - * MSF is configured by specifying a fsg_config structure. It has the - * following fields: - * - * nluns Number of LUNs function have (anywhere from 1 - * to FSG_MAX_LUNS which is 8). - * luns An array of LUN configuration values. This - * should be filled for each LUN that - * function will include (ie. for "nluns" - * LUNs). Each element of the array has - * the following fields: - * ->filename The path to the backing file for the LUN. - * Required if LUN is not marked as - * removable. - * ->ro Flag specifying access to the LUN shall be - * read-only. This is implied if CD-ROM - * emulation is enabled as well as when - * it was impossible to open "filename" - * in R/W mode. - * ->removable Flag specifying that LUN shall be indicated as - * being removable. - * ->cdrom Flag specifying that LUN shall be reported as - * being a CD-ROM. - * ->nofua Flag specifying that FUA flag in SCSI WRITE(10,12) - * commands for this LUN shall be ignored. - * - * vendor_name - * product_name - * release Information used as a reply to INQUIRY - * request. To use default set to NULL, - * NULL, 0xffff respectively. The first - * field should be 8 and the second 16 - * characters or less. - * - * can_stall Set to permit function to halt bulk endpoints. - * Disabled on some USB devices known not - * to work correctly. You should set it - * to true. - * - * If "removable" is not set for a LUN then a backing file must be - * specified. If it is set, then NULL filename means the LUN's medium - * is not loaded (an empty string as "filename" in the fsg_config - * structure causes error). The CD-ROM emulation includes a single - * data track and no audio tracks; hence there need be only one - * backing file per LUN. - * - * This function is heavily based on "File-backed Storage Gadget" by - * Alan Stern which in turn is heavily based on "Gadget Zero" by David - * Brownell. The driver's SCSI command interface was based on the - * "Information technology - Small Computer System Interface - 2" - * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93, - * available at . - * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which - * was based on the "Universal Serial Bus Mass Storage Class UFI - * Command Specification" document, Revision 1.0, December 14, 1998, - * available at - * . - */ - -/* - * Driver Design - * - * The MSF is fairly straightforward. There is a main kernel - * thread that handles most of the work. Interrupt routines field - * callbacks from the controller driver: bulk- and interrupt-request - * completion notifications, endpoint-0 events, and disconnect events. - * Completion events are passed to the main thread by wakeup calls. Many - * ep0 requests are handled at interrupt time, but SetInterface, - * SetConfiguration, and device reset requests are forwarded to the - * thread in the form of "exceptions" using SIGUSR1 signals (since they - * should interrupt any ongoing file I/O operations). - * - * The thread's main routine implements the standard command/data/status - * parts of a SCSI interaction. It and its subroutines are full of tests - * for pending signals/exceptions -- all this polling is necessary since - * the kernel has no setjmp/longjmp equivalents. (Maybe this is an - * indication that the driver really wants to be running in userspace.) - * An important point is that so long as the thread is alive it keeps an - * open reference to the backing file. This will prevent unmounting - * the backing file's underlying filesystem and could cause problems - * during system shutdown, for example. To prevent such problems, the - * thread catches INT, TERM, and KILL signals and converts them into - * an EXIT exception. - * - * In normal operation the main thread is started during the gadget's - * fsg_bind() callback and stopped during fsg_unbind(). But it can - * also exit when it receives a signal, and there's no point leaving - * the gadget running when the thread is dead. As of this moment, MSF - * provides no way to deregister the gadget when thread dies -- maybe - * a callback functions is needed. - * - * To provide maximum throughput, the driver uses a circular pipeline of - * buffer heads (struct fsg_buffhd). In principle the pipeline can be - * arbitrarily long; in practice the benefits don't justify having more - * than 2 stages (i.e., double buffering). But it helps to think of the - * pipeline as being a long one. Each buffer head contains a bulk-in and - * a bulk-out request pointer (since the buffer can be used for both - * output and input -- directions always are given from the host's - * point of view) as well as a pointer to the buffer and various state - * variables. - * - * Use of the pipeline follows a simple protocol. There is a variable - * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. - * At any time that buffer head may still be in use from an earlier - * request, so each buffer head has a state variable indicating whether - * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the - * buffer head to be EMPTY, filling the buffer either by file I/O or by - * USB I/O (during which the buffer head is BUSY), and marking the buffer - * head FULL when the I/O is complete. Then the buffer will be emptied - * (again possibly by USB I/O, during which it is marked BUSY) and - * finally marked EMPTY again (possibly by a completion routine). - * - * A module parameter tells the driver to avoid stalling the bulk - * endpoints wherever the transport specification allows. This is - * necessary for some UDCs like the SuperH, which cannot reliably clear a - * halt on a bulk endpoint. However, under certain circumstances the - * Bulk-only specification requires a stall. In such cases the driver - * will halt the endpoint and set a flag indicating that it should clear - * the halt in software during the next device reset. Hopefully this - * will permit everything to work correctly. Furthermore, although the - * specification allows the bulk-out endpoint to halt when the host sends - * too much data, implementing this would cause an unavoidable race. - * The driver will always use the "no-stall" approach for OUT transfers. - * - * One subtle point concerns sending status-stage responses for ep0 - * requests. Some of these requests, such as device reset, can involve - * interrupting an ongoing file I/O operation, which might take an - * arbitrarily long time. During that delay the host might give up on - * the original ep0 request and issue a new one. When that happens the - * driver should not notify the host about completion of the original - * request, as the host will no longer be waiting for it. So the driver - * assigns to each ep0 request a unique tag, and it keeps track of the - * tag value of the request associated with a long-running exception - * (device-reset, interface-change, or configuration-change). When the - * exception handler is finished, the status-stage response is submitted - * only if the current ep0 request tag is equal to the exception request - * tag. Thus only the most recently received ep0 request will get a - * status-stage response. - * - * Warning: This driver source file is too long. It ought to be split up - * into a header file plus about 3 separate .c files, to handle the details - * of the Gadget, USB Mass Storage, and SCSI protocols. - */ - - -/* #define VERBOSE_DEBUG */ -/* #define DUMP_MSGS */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "gadget_chips.h" - - -/*------------------------------------------------------------------------*/ - -#define FSG_DRIVER_DESC "Mass Storage Function" -#define FSG_DRIVER_VERSION "2009/09/11" - -static const char fsg_string_interface[] = "Mass Storage"; - -#define FSG_NO_DEVICE_STRINGS 1 -#define FSG_NO_OTG 1 -#define FSG_NO_INTR_EP 1 - -#include "storage_common.c" - - -/*-------------------------------------------------------------------------*/ - -struct fsg_dev; -struct fsg_common; - -/* FSF callback functions */ -struct fsg_operations { - /* - * Callback function to call when thread exits. If no - * callback is set or it returns value lower then zero MSF - * will force eject all LUNs it operates on (including those - * marked as non-removable or with prevent_medium_removal flag - * set). - */ - int (*thread_exits)(struct fsg_common *common); - - /* - * Called prior to ejection. Negative return means error, - * zero means to continue with ejection, positive means not to - * eject. - */ - int (*pre_eject)(struct fsg_common *common, - struct fsg_lun *lun, int num); - /* - * Called after ejection. Negative return means error, zero - * or positive is just a success. - */ - int (*post_eject)(struct fsg_common *common, - struct fsg_lun *lun, int num); -}; - -/* Data shared by all the FSG instances. */ -struct fsg_common { - struct usb_gadget *gadget; - struct usb_composite_dev *cdev; - struct fsg_dev *fsg, *new_fsg; - wait_queue_head_t fsg_wait; - - /* filesem protects: backing files in use */ - struct rw_semaphore filesem; - - /* lock protects: state, all the req_busy's */ - spinlock_t lock; - - struct usb_ep *ep0; /* Copy of gadget->ep0 */ - struct usb_request *ep0req; /* Copy of cdev->req */ - unsigned int ep0_req_tag; - - struct fsg_buffhd *next_buffhd_to_fill; - struct fsg_buffhd *next_buffhd_to_drain; - struct fsg_buffhd *buffhds; - - int cmnd_size; - u8 cmnd[MAX_COMMAND_SIZE]; - - unsigned int nluns; - unsigned int lun; - struct fsg_lun *luns; - struct fsg_lun *curlun; - - unsigned int bulk_out_maxpacket; - enum fsg_state state; /* For exception handling */ - unsigned int exception_req_tag; - - enum data_direction data_dir; - u32 data_size; - u32 data_size_from_cmnd; - u32 tag; - u32 residue; - u32 usb_amount_left; - - unsigned int can_stall:1; - unsigned int free_storage_on_release:1; - unsigned int phase_error:1; - unsigned int short_packet_received:1; - unsigned int bad_lun_okay:1; - unsigned int running:1; - - int thread_wakeup_needed; - struct completion thread_notifier; - struct task_struct *thread_task; - - /* Callback functions. */ - const struct fsg_operations *ops; - /* Gadget's private data. */ - void *private_data; - - /* - * Vendor (8 chars), product (16 chars), release (4 - * hexadecimal digits) and NUL byte - */ - char inquiry_string[8 + 16 + 4 + 1]; - - struct kref ref; -}; - -struct fsg_config { - unsigned nluns; - struct fsg_lun_config { - const char *filename; - char ro; - char removable; - char cdrom; - char nofua; - } luns[FSG_MAX_LUNS]; - - /* Callback functions. */ - const struct fsg_operations *ops; - /* Gadget's private data. */ - void *private_data; - - const char *vendor_name; /* 8 characters or less */ - const char *product_name; /* 16 characters or less */ - u16 release; - - char can_stall; -}; - -struct fsg_dev { - struct usb_function function; - struct usb_gadget *gadget; /* Copy of cdev->gadget */ - struct fsg_common *common; - - u16 interface_number; - - unsigned int bulk_in_enabled:1; - unsigned int bulk_out_enabled:1; - - unsigned long atomic_bitflags; -#define IGNORE_BULK_OUT 0 - - struct usb_ep *bulk_in; - struct usb_ep *bulk_out; -}; - -static inline int __fsg_is_set(struct fsg_common *common, - const char *func, unsigned line) -{ - if (common->fsg) - return 1; - ERROR(common, "common->fsg is NULL in %s at %u\n", func, line); - WARN_ON(1); - return 0; -} - -#define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__)) - -static inline struct fsg_dev *fsg_from_func(struct usb_function *f) -{ - return container_of(f, struct fsg_dev, function); -} - -typedef void (*fsg_routine_t)(struct fsg_dev *); - -static int exception_in_progress(struct fsg_common *common) -{ - return common->state > FSG_STATE_IDLE; -} - -/* Make bulk-out requests be divisible by the maxpacket size */ -static void set_bulk_out_req_length(struct fsg_common *common, - struct fsg_buffhd *bh, unsigned int length) -{ - unsigned int rem; - - bh->bulk_out_intended_length = length; - rem = length % common->bulk_out_maxpacket; - if (rem > 0) - length += common->bulk_out_maxpacket - rem; - bh->outreq->length = length; -} - - -/*-------------------------------------------------------------------------*/ - -static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) -{ - const char *name; - - if (ep == fsg->bulk_in) - name = "bulk-in"; - else if (ep == fsg->bulk_out) - name = "bulk-out"; - else - name = ep->name; - DBG(fsg, "%s set halt\n", name); - return usb_ep_set_halt(ep); -} - - -/*-------------------------------------------------------------------------*/ - -/* These routines may be called in process context or in_irq */ - -/* Caller must hold fsg->lock */ -static void wakeup_thread(struct fsg_common *common) -{ - /* Tell the main thread that something has happened */ - common->thread_wakeup_needed = 1; - if (common->thread_task) - wake_up_process(common->thread_task); -} - -static void raise_exception(struct fsg_common *common, enum fsg_state new_state) -{ - unsigned long flags; - - /* - * Do nothing if a higher-priority exception is already in progress. - * If a lower-or-equal priority exception is in progress, preempt it - * and notify the main thread by sending it a signal. - */ - spin_lock_irqsave(&common->lock, flags); - if (common->state <= new_state) { - common->exception_req_tag = common->ep0_req_tag; - common->state = new_state; - if (common->thread_task) - send_sig_info(SIGUSR1, SEND_SIG_FORCED, - common->thread_task); - } - spin_unlock_irqrestore(&common->lock, flags); -} - - -/*-------------------------------------------------------------------------*/ - -static int ep0_queue(struct fsg_common *common) -{ - int rc; - - rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC); - common->ep0->driver_data = common; - if (rc != 0 && rc != -ESHUTDOWN) { - /* We can't do much more than wait for a reset */ - WARNING(common, "error in submission: %s --> %d\n", - common->ep0->name, rc); - } - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -/* Completion handlers. These always run in_irq. */ - -static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct fsg_common *common = ep->driver_data; - struct fsg_buffhd *bh = req->context; - - if (req->status || req->actual != req->length) - DBG(common, "%s --> %d, %u/%u\n", __func__, - req->status, req->actual, req->length); - if (req->status == -ECONNRESET) /* Request was cancelled */ - usb_ep_fifo_flush(ep); - - /* Hold the lock while we update the request and buffer states */ - smp_wmb(); - spin_lock(&common->lock); - bh->inreq_busy = 0; - bh->state = BUF_STATE_EMPTY; - wakeup_thread(common); - spin_unlock(&common->lock); -} - -static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct fsg_common *common = ep->driver_data; - struct fsg_buffhd *bh = req->context; - - dump_msg(common, "bulk-out", req->buf, req->actual); - if (req->status || req->actual != bh->bulk_out_intended_length) - DBG(common, "%s --> %d, %u/%u\n", __func__, - req->status, req->actual, bh->bulk_out_intended_length); - if (req->status == -ECONNRESET) /* Request was cancelled */ - usb_ep_fifo_flush(ep); - - /* Hold the lock while we update the request and buffer states */ - smp_wmb(); - spin_lock(&common->lock); - bh->outreq_busy = 0; - bh->state = BUF_STATE_FULL; - wakeup_thread(common); - spin_unlock(&common->lock); -} - -static int fsg_setup(struct usb_function *f, - const struct usb_ctrlrequest *ctrl) -{ - struct fsg_dev *fsg = fsg_from_func(f); - struct usb_request *req = fsg->common->ep0req; - u16 w_index = le16_to_cpu(ctrl->wIndex); - u16 w_value = le16_to_cpu(ctrl->wValue); - u16 w_length = le16_to_cpu(ctrl->wLength); - - if (!fsg_is_set(fsg->common)) - return -EOPNOTSUPP; - - ++fsg->common->ep0_req_tag; /* Record arrival of a new request */ - req->context = NULL; - req->length = 0; - dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); - - switch (ctrl->bRequest) { - - case US_BULK_RESET_REQUEST: - if (ctrl->bRequestType != - (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) - break; - if (w_index != fsg->interface_number || w_value != 0 || - w_length != 0) - return -EDOM; - - /* - * Raise an exception to stop the current operation - * and reinitialize our state. - */ - DBG(fsg, "bulk reset request\n"); - raise_exception(fsg->common, FSG_STATE_RESET); - return DELAYED_STATUS; - - case US_BULK_GET_MAX_LUN: - if (ctrl->bRequestType != - (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) - break; - if (w_index != fsg->interface_number || w_value != 0 || - w_length != 1) - return -EDOM; - VDBG(fsg, "get max LUN\n"); - *(u8 *)req->buf = fsg->common->nluns - 1; - - /* Respond with data/status */ - req->length = min((u16)1, w_length); - return ep0_queue(fsg->common); - } - - VDBG(fsg, - "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n", - ctrl->bRequestType, ctrl->bRequest, - le16_to_cpu(ctrl->wValue), w_index, w_length); - return -EOPNOTSUPP; -} - - -/*-------------------------------------------------------------------------*/ - -/* All the following routines run in process context */ - -/* Use this for bulk or interrupt transfers, not ep0 */ -static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, - struct usb_request *req, int *pbusy, - enum fsg_buffer_state *state) -{ - int rc; - - if (ep == fsg->bulk_in) - dump_msg(fsg, "bulk-in", req->buf, req->length); - - spin_lock_irq(&fsg->common->lock); - *pbusy = 1; - *state = BUF_STATE_BUSY; - spin_unlock_irq(&fsg->common->lock); - rc = usb_ep_queue(ep, req, GFP_KERNEL); - if (rc != 0) { - *pbusy = 0; - *state = BUF_STATE_EMPTY; - - /* We can't do much more than wait for a reset */ - - /* - * Note: currently the net2280 driver fails zero-length - * submissions if DMA is enabled. - */ - if (rc != -ESHUTDOWN && - !(rc == -EOPNOTSUPP && req->length == 0)) - WARNING(fsg, "error in submission: %s --> %d\n", - ep->name, rc); - } -} - -static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh) -{ - if (!fsg_is_set(common)) - return false; - start_transfer(common->fsg, common->fsg->bulk_in, - bh->inreq, &bh->inreq_busy, &bh->state); - return true; -} - -static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh) -{ - if (!fsg_is_set(common)) - return false; - start_transfer(common->fsg, common->fsg->bulk_out, - bh->outreq, &bh->outreq_busy, &bh->state); - return true; -} - -static int sleep_thread(struct fsg_common *common) -{ - int rc = 0; - - /* Wait until a signal arrives or we are woken up */ - for (;;) { - try_to_freeze(); - set_current_state(TASK_INTERRUPTIBLE); - if (signal_pending(current)) { - rc = -EINTR; - break; - } - if (common->thread_wakeup_needed) - break; - schedule(); - } - __set_current_state(TASK_RUNNING); - common->thread_wakeup_needed = 0; - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -static int do_read(struct fsg_common *common) -{ - struct fsg_lun *curlun = common->curlun; - u32 lba; - struct fsg_buffhd *bh; - int rc; - u32 amount_left; - loff_t file_offset, file_offset_tmp; - unsigned int amount; - ssize_t nread; - - /* - * Get the starting Logical Block Address and check that it's - * not too big. - */ - if (common->cmnd[0] == READ_6) - lba = get_unaligned_be24(&common->cmnd[1]); - else { - lba = get_unaligned_be32(&common->cmnd[2]); - - /* - * We allow DPO (Disable Page Out = don't save data in the - * cache) and FUA (Force Unit Access = don't read from the - * cache), but we don't implement them. - */ - if ((common->cmnd[1] & ~0x18) != 0) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - } - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - file_offset = ((loff_t) lba) << curlun->blkbits; - - /* Carry out the file reads */ - amount_left = common->data_size_from_cmnd; - if (unlikely(amount_left == 0)) - return -EIO; /* No default reply */ - - for (;;) { - /* - * Figure out how much we need to read: - * Try to read the remaining amount. - * But don't read more than the buffer size. - * And don't try to read past the end of the file. - */ - amount = min(amount_left, FSG_BUFLEN); - amount = min((loff_t)amount, - curlun->file_length - file_offset); - - /* Wait for the next buffer to become available */ - bh = common->next_buffhd_to_fill; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); - if (rc) - return rc; - } - - /* - * If we were asked to read past the end of file, - * end with an empty buffer. - */ - if (amount == 0) { - curlun->sense_data = - SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = - file_offset >> curlun->blkbits; - curlun->info_valid = 1; - bh->inreq->length = 0; - bh->state = BUF_STATE_FULL; - break; - } - - /* Perform the read */ - file_offset_tmp = file_offset; - nread = vfs_read(curlun->filp, - (char __user *)bh->buf, - amount, &file_offset_tmp); - VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, - (unsigned long long)file_offset, (int)nread); - if (signal_pending(current)) - return -EINTR; - - if (nread < 0) { - LDBG(curlun, "error in file read: %d\n", (int)nread); - nread = 0; - } else if (nread < amount) { - LDBG(curlun, "partial file read: %d/%u\n", - (int)nread, amount); - nread = round_down(nread, curlun->blksize); - } - file_offset += nread; - amount_left -= nread; - common->residue -= nread; - - /* - * Except at the end of the transfer, nread will be - * equal to the buffer size, which is divisible by the - * bulk-in maxpacket size. - */ - bh->inreq->length = nread; - bh->state = BUF_STATE_FULL; - - /* If an error occurred, report it and its position */ - if (nread < amount) { - curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = - file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - if (amount_left == 0) - break; /* No more left to read */ - - /* Send this buffer and go read some more */ - bh->inreq->zero = 0; - if (!start_in_transfer(common, bh)) - /* Don't know what to do if common->fsg is NULL */ - return -EIO; - common->next_buffhd_to_fill = bh->next; - } - - return -EIO; /* No default reply */ -} - - -/*-------------------------------------------------------------------------*/ - -static int do_write(struct fsg_common *common) -{ - struct fsg_lun *curlun = common->curlun; - u32 lba; - struct fsg_buffhd *bh; - int get_some_more; - u32 amount_left_to_req, amount_left_to_write; - loff_t usb_offset, file_offset, file_offset_tmp; - unsigned int amount; - ssize_t nwritten; - int rc; - - if (curlun->ro) { - curlun->sense_data = SS_WRITE_PROTECTED; - return -EINVAL; - } - spin_lock(&curlun->filp->f_lock); - curlun->filp->f_flags &= ~O_SYNC; /* Default is not to wait */ - spin_unlock(&curlun->filp->f_lock); - - /* - * Get the starting Logical Block Address and check that it's - * not too big - */ - if (common->cmnd[0] == WRITE_6) - lba = get_unaligned_be24(&common->cmnd[1]); - else { - lba = get_unaligned_be32(&common->cmnd[2]); - - /* - * We allow DPO (Disable Page Out = don't save data in the - * cache) and FUA (Force Unit Access = write directly to the - * medium). We don't implement DPO; we implement FUA by - * performing synchronous output. - */ - if (common->cmnd[1] & ~0x18) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */ - spin_lock(&curlun->filp->f_lock); - curlun->filp->f_flags |= O_SYNC; - spin_unlock(&curlun->filp->f_lock); - } - } - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - - /* Carry out the file writes */ - get_some_more = 1; - file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; - amount_left_to_req = common->data_size_from_cmnd; - amount_left_to_write = common->data_size_from_cmnd; - - while (amount_left_to_write > 0) { - - /* Queue a request for more data from the host */ - bh = common->next_buffhd_to_fill; - if (bh->state == BUF_STATE_EMPTY && get_some_more) { - - /* - * Figure out how much we want to get: - * Try to get the remaining amount, - * but not more than the buffer size. - */ - amount = min(amount_left_to_req, FSG_BUFLEN); - - /* Beyond the end of the backing file? */ - if (usb_offset >= curlun->file_length) { - get_some_more = 0; - curlun->sense_data = - SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = - usb_offset >> curlun->blkbits; - curlun->info_valid = 1; - continue; - } - - /* Get the next buffer */ - usb_offset += amount; - common->usb_amount_left -= amount; - amount_left_to_req -= amount; - if (amount_left_to_req == 0) - get_some_more = 0; - - /* - * Except at the end of the transfer, amount will be - * equal to the buffer size, which is divisible by - * the bulk-out maxpacket size. - */ - set_bulk_out_req_length(common, bh, amount); - if (!start_out_transfer(common, bh)) - /* Dunno what to do if common->fsg is NULL */ - return -EIO; - common->next_buffhd_to_fill = bh->next; - continue; - } - - /* Write the received data to the backing file */ - bh = common->next_buffhd_to_drain; - if (bh->state == BUF_STATE_EMPTY && !get_some_more) - break; /* We stopped early */ - if (bh->state == BUF_STATE_FULL) { - smp_rmb(); - common->next_buffhd_to_drain = bh->next; - bh->state = BUF_STATE_EMPTY; - - /* Did something go wrong with the transfer? */ - if (bh->outreq->status != 0) { - curlun->sense_data = SS_COMMUNICATION_FAILURE; - curlun->sense_data_info = - file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - amount = bh->outreq->actual; - if (curlun->file_length - file_offset < amount) { - LERROR(curlun, - "write %u @ %llu beyond end %llu\n", - amount, (unsigned long long)file_offset, - (unsigned long long)curlun->file_length); - amount = curlun->file_length - file_offset; - } - - /* Don't accept excess data. The spec doesn't say - * what to do in this case. We'll ignore the error. - */ - amount = min(amount, bh->bulk_out_intended_length); - - /* Don't write a partial block */ - amount = round_down(amount, curlun->blksize); - if (amount == 0) - goto empty_write; - - /* Perform the write */ - file_offset_tmp = file_offset; - nwritten = vfs_write(curlun->filp, - (char __user *)bh->buf, - amount, &file_offset_tmp); - VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, - (unsigned long long)file_offset, (int)nwritten); - if (signal_pending(current)) - return -EINTR; /* Interrupted! */ - - if (nwritten < 0) { - LDBG(curlun, "error in file write: %d\n", - (int)nwritten); - nwritten = 0; - } else if (nwritten < amount) { - LDBG(curlun, "partial file write: %d/%u\n", - (int)nwritten, amount); - nwritten = round_down(nwritten, curlun->blksize); - } - file_offset += nwritten; - amount_left_to_write -= nwritten; - common->residue -= nwritten; - - /* If an error occurred, report it and its position */ - if (nwritten < amount) { - curlun->sense_data = SS_WRITE_ERROR; - curlun->sense_data_info = - file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - empty_write: - /* Did the host decide to stop early? */ - if (bh->outreq->actual < bh->bulk_out_intended_length) { - common->short_packet_received = 1; - break; - } - continue; - } - - /* Wait for something to happen */ - rc = sleep_thread(common); - if (rc) - return rc; - } - - return -EIO; /* No default reply */ -} - - -/*-------------------------------------------------------------------------*/ - -static int do_synchronize_cache(struct fsg_common *common) -{ - struct fsg_lun *curlun = common->curlun; - int rc; - - /* We ignore the requested LBA and write out all file's - * dirty data buffers. */ - rc = fsg_lun_fsync_sub(curlun); - if (rc) - curlun->sense_data = SS_WRITE_ERROR; - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -static void invalidate_sub(struct fsg_lun *curlun) -{ - struct file *filp = curlun->filp; - struct inode *inode = file_inode(filp); - unsigned long rc; - - rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); - VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); -} - -static int do_verify(struct fsg_common *common) -{ - struct fsg_lun *curlun = common->curlun; - u32 lba; - u32 verification_length; - struct fsg_buffhd *bh = common->next_buffhd_to_fill; - loff_t file_offset, file_offset_tmp; - u32 amount_left; - unsigned int amount; - ssize_t nread; - - /* - * Get the starting Logical Block Address and check that it's - * not too big. - */ - lba = get_unaligned_be32(&common->cmnd[2]); - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - - /* - * We allow DPO (Disable Page Out = don't save data in the - * cache) but we don't implement it. - */ - if (common->cmnd[1] & ~0x10) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - verification_length = get_unaligned_be16(&common->cmnd[7]); - if (unlikely(verification_length == 0)) - return -EIO; /* No default reply */ - - /* Prepare to carry out the file verify */ - amount_left = verification_length << curlun->blkbits; - file_offset = ((loff_t) lba) << curlun->blkbits; - - /* Write out all the dirty buffers before invalidating them */ - fsg_lun_fsync_sub(curlun); - if (signal_pending(current)) - return -EINTR; - - invalidate_sub(curlun); - if (signal_pending(current)) - return -EINTR; - - /* Just try to read the requested blocks */ - while (amount_left > 0) { - /* - * Figure out how much we need to read: - * Try to read the remaining amount, but not more than - * the buffer size. - * And don't try to read past the end of the file. - */ - amount = min(amount_left, FSG_BUFLEN); - amount = min((loff_t)amount, - curlun->file_length - file_offset); - if (amount == 0) { - curlun->sense_data = - SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = - file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - /* Perform the read */ - file_offset_tmp = file_offset; - nread = vfs_read(curlun->filp, - (char __user *) bh->buf, - amount, &file_offset_tmp); - VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, - (unsigned long long) file_offset, - (int) nread); - if (signal_pending(current)) - return -EINTR; - - if (nread < 0) { - LDBG(curlun, "error in file verify: %d\n", (int)nread); - nread = 0; - } else if (nread < amount) { - LDBG(curlun, "partial file verify: %d/%u\n", - (int)nread, amount); - nread = round_down(nread, curlun->blksize); - } - if (nread == 0) { - curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = - file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - file_offset += nread; - amount_left -= nread; - } - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = common->curlun; - u8 *buf = (u8 *) bh->buf; - - if (!curlun) { /* Unsupported LUNs are okay */ - common->bad_lun_okay = 1; - memset(buf, 0, 36); - buf[0] = 0x7f; /* Unsupported, no device-type */ - buf[4] = 31; /* Additional length */ - return 36; - } - - buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK; - buf[1] = curlun->removable ? 0x80 : 0; - buf[2] = 2; /* ANSI SCSI level 2 */ - buf[3] = 2; /* SCSI-2 INQUIRY data format */ - buf[4] = 31; /* Additional length */ - buf[5] = 0; /* No special options */ - buf[6] = 0; - buf[7] = 0; - memcpy(buf + 8, common->inquiry_string, sizeof common->inquiry_string); - return 36; -} - -static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = common->curlun; - u8 *buf = (u8 *) bh->buf; - u32 sd, sdinfo; - int valid; - - /* - * From the SCSI-2 spec., section 7.9 (Unit attention condition): - * - * If a REQUEST SENSE command is received from an initiator - * with a pending unit attention condition (before the target - * generates the contingent allegiance condition), then the - * target shall either: - * a) report any pending sense data and preserve the unit - * attention condition on the logical unit, or, - * b) report the unit attention condition, may discard any - * pending sense data, and clear the unit attention - * condition on the logical unit for that initiator. - * - * FSG normally uses option a); enable this code to use option b). - */ -#if 0 - if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { - curlun->sense_data = curlun->unit_attention_data; - curlun->unit_attention_data = SS_NO_SENSE; - } -#endif - - if (!curlun) { /* Unsupported LUNs are okay */ - common->bad_lun_okay = 1; - sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; - sdinfo = 0; - valid = 0; - } else { - sd = curlun->sense_data; - sdinfo = curlun->sense_data_info; - valid = curlun->info_valid << 7; - curlun->sense_data = SS_NO_SENSE; - curlun->sense_data_info = 0; - curlun->info_valid = 0; - } - - memset(buf, 0, 18); - buf[0] = valid | 0x70; /* Valid, current error */ - buf[2] = SK(sd); - put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ - buf[7] = 18 - 8; /* Additional sense length */ - buf[12] = ASC(sd); - buf[13] = ASCQ(sd); - return 18; -} - -static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = common->curlun; - u32 lba = get_unaligned_be32(&common->cmnd[2]); - int pmi = common->cmnd[8]; - u8 *buf = (u8 *)bh->buf; - - /* Check the PMI and LBA fields */ - if (pmi > 1 || (pmi == 0 && lba != 0)) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); - /* Max logical block */ - put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ - return 8; -} - -static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = common->curlun; - int msf = common->cmnd[1] & 0x02; - u32 lba = get_unaligned_be32(&common->cmnd[2]); - u8 *buf = (u8 *)bh->buf; - - if (common->cmnd[1] & ~0x02) { /* Mask away MSF */ - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - - memset(buf, 0, 8); - buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ - store_cdrom_address(&buf[4], msf, lba); - return 8; -} - -static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = common->curlun; - int msf = common->cmnd[1] & 0x02; - int start_track = common->cmnd[6]; - u8 *buf = (u8 *)bh->buf; - - if ((common->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ - start_track > 1) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - memset(buf, 0, 20); - buf[1] = (20-2); /* TOC data length */ - buf[2] = 1; /* First track number */ - buf[3] = 1; /* Last track number */ - buf[5] = 0x16; /* Data track, copying allowed */ - buf[6] = 0x01; /* Only track is number 1 */ - store_cdrom_address(&buf[8], msf, 0); - - buf[13] = 0x16; /* Lead-out track is data */ - buf[14] = 0xAA; /* Lead-out track number */ - store_cdrom_address(&buf[16], msf, curlun->num_sectors); - return 20; -} - -static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = common->curlun; - int mscmnd = common->cmnd[0]; - u8 *buf = (u8 *) bh->buf; - u8 *buf0 = buf; - int pc, page_code; - int changeable_values, all_pages; - int valid_page = 0; - int len, limit; - - if ((common->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */ - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - pc = common->cmnd[2] >> 6; - page_code = common->cmnd[2] & 0x3f; - if (pc == 3) { - curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; - return -EINVAL; - } - changeable_values = (pc == 1); - all_pages = (page_code == 0x3f); - - /* - * Write the mode parameter header. Fixed values are: default - * medium type, no cache control (DPOFUA), and no block descriptors. - * The only variable value is the WriteProtect bit. We will fill in - * the mode data length later. - */ - memset(buf, 0, 8); - if (mscmnd == MODE_SENSE) { - buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ - buf += 4; - limit = 255; - } else { /* MODE_SENSE_10 */ - buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ - buf += 8; - limit = 65535; /* Should really be FSG_BUFLEN */ - } - - /* No block descriptors */ - - /* - * The mode pages, in numerical order. The only page we support - * is the Caching page. - */ - if (page_code == 0x08 || all_pages) { - valid_page = 1; - buf[0] = 0x08; /* Page code */ - buf[1] = 10; /* Page length */ - memset(buf+2, 0, 10); /* None of the fields are changeable */ - - if (!changeable_values) { - buf[2] = 0x04; /* Write cache enable, */ - /* Read cache not disabled */ - /* No cache retention priorities */ - put_unaligned_be16(0xffff, &buf[4]); - /* Don't disable prefetch */ - /* Minimum prefetch = 0 */ - put_unaligned_be16(0xffff, &buf[8]); - /* Maximum prefetch */ - put_unaligned_be16(0xffff, &buf[10]); - /* Maximum prefetch ceiling */ - } - buf += 12; - } - - /* - * Check that a valid page was requested and the mode data length - * isn't too long. - */ - len = buf - buf0; - if (!valid_page || len > limit) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - /* Store the mode data length */ - if (mscmnd == MODE_SENSE) - buf0[0] = len - 1; - else - put_unaligned_be16(len - 2, buf0); - return len; -} - -static int do_start_stop(struct fsg_common *common) -{ - struct fsg_lun *curlun = common->curlun; - int loej, start; - - if (!curlun) { - return -EINVAL; - } else if (!curlun->removable) { - curlun->sense_data = SS_INVALID_COMMAND; - return -EINVAL; - } else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */ - (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */ - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - loej = common->cmnd[4] & 0x02; - start = common->cmnd[4] & 0x01; - - /* - * Our emulation doesn't support mounting; the medium is - * available for use as soon as it is loaded. - */ - if (start) { - if (!fsg_lun_is_open(curlun)) { - curlun->sense_data = SS_MEDIUM_NOT_PRESENT; - return -EINVAL; - } - return 0; - } - - /* Are we allowed to unload the media? */ - if (curlun->prevent_medium_removal) { - LDBG(curlun, "unload attempt prevented\n"); - curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; - return -EINVAL; - } - - if (!loej) - return 0; - - /* Simulate an unload/eject */ - if (common->ops && common->ops->pre_eject) { - int r = common->ops->pre_eject(common, curlun, - curlun - common->luns); - if (unlikely(r < 0)) - return r; - else if (r) - return 0; - } - - up_read(&common->filesem); - down_write(&common->filesem); - fsg_lun_close(curlun); - up_write(&common->filesem); - down_read(&common->filesem); - - return common->ops && common->ops->post_eject - ? min(0, common->ops->post_eject(common, curlun, - curlun - common->luns)) - : 0; -} - -static int do_prevent_allow(struct fsg_common *common) -{ - struct fsg_lun *curlun = common->curlun; - int prevent; - - if (!common->curlun) { - return -EINVAL; - } else if (!common->curlun->removable) { - common->curlun->sense_data = SS_INVALID_COMMAND; - return -EINVAL; - } - - prevent = common->cmnd[4] & 0x01; - if ((common->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */ - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - if (curlun->prevent_medium_removal && !prevent) - fsg_lun_fsync_sub(curlun); - curlun->prevent_medium_removal = prevent; - return 0; -} - -static int do_read_format_capacities(struct fsg_common *common, - struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = common->curlun; - u8 *buf = (u8 *) bh->buf; - - buf[0] = buf[1] = buf[2] = 0; - buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */ - buf += 4; - - put_unaligned_be32(curlun->num_sectors, &buf[0]); - /* Number of blocks */ - put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ - buf[4] = 0x02; /* Current capacity */ - return 12; -} - -static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = common->curlun; - - /* We don't support MODE SELECT */ - if (curlun) - curlun->sense_data = SS_INVALID_COMMAND; - return -EINVAL; -} - - -/*-------------------------------------------------------------------------*/ - -static int halt_bulk_in_endpoint(struct fsg_dev *fsg) -{ - int rc; - - rc = fsg_set_halt(fsg, fsg->bulk_in); - if (rc == -EAGAIN) - VDBG(fsg, "delayed bulk-in endpoint halt\n"); - while (rc != 0) { - if (rc != -EAGAIN) { - WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); - rc = 0; - break; - } - - /* Wait for a short time and then try again */ - if (msleep_interruptible(100) != 0) - return -EINTR; - rc = usb_ep_set_halt(fsg->bulk_in); - } - return rc; -} - -static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) -{ - int rc; - - DBG(fsg, "bulk-in set wedge\n"); - rc = usb_ep_set_wedge(fsg->bulk_in); - if (rc == -EAGAIN) - VDBG(fsg, "delayed bulk-in endpoint wedge\n"); - while (rc != 0) { - if (rc != -EAGAIN) { - WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); - rc = 0; - break; - } - - /* Wait for a short time and then try again */ - if (msleep_interruptible(100) != 0) - return -EINTR; - rc = usb_ep_set_wedge(fsg->bulk_in); - } - return rc; -} - -static int throw_away_data(struct fsg_common *common) -{ - struct fsg_buffhd *bh; - u32 amount; - int rc; - - for (bh = common->next_buffhd_to_drain; - bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0; - bh = common->next_buffhd_to_drain) { - - /* Throw away the data in a filled buffer */ - if (bh->state == BUF_STATE_FULL) { - smp_rmb(); - bh->state = BUF_STATE_EMPTY; - common->next_buffhd_to_drain = bh->next; - - /* A short packet or an error ends everything */ - if (bh->outreq->actual < bh->bulk_out_intended_length || - bh->outreq->status != 0) { - raise_exception(common, - FSG_STATE_ABORT_BULK_OUT); - return -EINTR; - } - continue; - } - - /* Try to submit another request if we need one */ - bh = common->next_buffhd_to_fill; - if (bh->state == BUF_STATE_EMPTY - && common->usb_amount_left > 0) { - amount = min(common->usb_amount_left, FSG_BUFLEN); - - /* - * Except at the end of the transfer, amount will be - * equal to the buffer size, which is divisible by - * the bulk-out maxpacket size. - */ - set_bulk_out_req_length(common, bh, amount); - if (!start_out_transfer(common, bh)) - /* Dunno what to do if common->fsg is NULL */ - return -EIO; - common->next_buffhd_to_fill = bh->next; - common->usb_amount_left -= amount; - continue; - } - - /* Otherwise wait for something to happen */ - rc = sleep_thread(common); - if (rc) - return rc; - } - return 0; -} - -static int finish_reply(struct fsg_common *common) -{ - struct fsg_buffhd *bh = common->next_buffhd_to_fill; - int rc = 0; - - switch (common->data_dir) { - case DATA_DIR_NONE: - break; /* Nothing to send */ - - /* - * If we don't know whether the host wants to read or write, - * this must be CB or CBI with an unknown command. We mustn't - * try to send or receive any data. So stall both bulk pipes - * if we can and wait for a reset. - */ - case DATA_DIR_UNKNOWN: - if (!common->can_stall) { - /* Nothing */ - } else if (fsg_is_set(common)) { - fsg_set_halt(common->fsg, common->fsg->bulk_out); - rc = halt_bulk_in_endpoint(common->fsg); - } else { - /* Don't know what to do if common->fsg is NULL */ - rc = -EIO; - } - break; - - /* All but the last buffer of data must have already been sent */ - case DATA_DIR_TO_HOST: - if (common->data_size == 0) { - /* Nothing to send */ - - /* Don't know what to do if common->fsg is NULL */ - } else if (!fsg_is_set(common)) { - rc = -EIO; - - /* If there's no residue, simply send the last buffer */ - } else if (common->residue == 0) { - bh->inreq->zero = 0; - if (!start_in_transfer(common, bh)) - return -EIO; - common->next_buffhd_to_fill = bh->next; - - /* - * For Bulk-only, mark the end of the data with a short - * packet. If we are allowed to stall, halt the bulk-in - * endpoint. (Note: This violates the Bulk-Only Transport - * specification, which requires us to pad the data if we - * don't halt the endpoint. Presumably nobody will mind.) - */ - } else { - bh->inreq->zero = 1; - if (!start_in_transfer(common, bh)) - rc = -EIO; - common->next_buffhd_to_fill = bh->next; - if (common->can_stall) - rc = halt_bulk_in_endpoint(common->fsg); - } - break; - - /* - * We have processed all we want from the data the host has sent. - * There may still be outstanding bulk-out requests. - */ - case DATA_DIR_FROM_HOST: - if (common->residue == 0) { - /* Nothing to receive */ - - /* Did the host stop sending unexpectedly early? */ - } else if (common->short_packet_received) { - raise_exception(common, FSG_STATE_ABORT_BULK_OUT); - rc = -EINTR; - - /* - * We haven't processed all the incoming data. Even though - * we may be allowed to stall, doing so would cause a race. - * The controller may already have ACK'ed all the remaining - * bulk-out packets, in which case the host wouldn't see a - * STALL. Not realizing the endpoint was halted, it wouldn't - * clear the halt -- leading to problems later on. - */ -#if 0 - } else if (common->can_stall) { - if (fsg_is_set(common)) - fsg_set_halt(common->fsg, - common->fsg->bulk_out); - raise_exception(common, FSG_STATE_ABORT_BULK_OUT); - rc = -EINTR; -#endif - - /* - * We can't stall. Read in the excess data and throw it - * all away. - */ - } else { - rc = throw_away_data(common); - } - break; - } - return rc; -} - -static int send_status(struct fsg_common *common) -{ - struct fsg_lun *curlun = common->curlun; - struct fsg_buffhd *bh; - struct bulk_cs_wrap *csw; - int rc; - u8 status = US_BULK_STAT_OK; - u32 sd, sdinfo = 0; - - /* Wait for the next buffer to become available */ - bh = common->next_buffhd_to_fill; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); - if (rc) - return rc; - } - - if (curlun) { - sd = curlun->sense_data; - sdinfo = curlun->sense_data_info; - } else if (common->bad_lun_okay) - sd = SS_NO_SENSE; - else - sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; - - if (common->phase_error) { - DBG(common, "sending phase-error status\n"); - status = US_BULK_STAT_PHASE; - sd = SS_INVALID_COMMAND; - } else if (sd != SS_NO_SENSE) { - DBG(common, "sending command-failure status\n"); - status = US_BULK_STAT_FAIL; - VDBG(common, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" - " info x%x\n", - SK(sd), ASC(sd), ASCQ(sd), sdinfo); - } - - /* Store and send the Bulk-only CSW */ - csw = (void *)bh->buf; - - csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); - csw->Tag = common->tag; - csw->Residue = cpu_to_le32(common->residue); - csw->Status = status; - - bh->inreq->length = US_BULK_CS_WRAP_LEN; - bh->inreq->zero = 0; - if (!start_in_transfer(common, bh)) - /* Don't know what to do if common->fsg is NULL */ - return -EIO; - - common->next_buffhd_to_fill = bh->next; - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -/* - * Check whether the command is properly formed and whether its data size - * and direction agree with the values we already have. - */ -static int check_command(struct fsg_common *common, int cmnd_size, - enum data_direction data_dir, unsigned int mask, - int needs_medium, const char *name) -{ - int i; - int lun = common->cmnd[1] >> 5; - static const char dirletter[4] = {'u', 'o', 'i', 'n'}; - char hdlen[20]; - struct fsg_lun *curlun; - - hdlen[0] = 0; - if (common->data_dir != DATA_DIR_UNKNOWN) - sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir], - common->data_size); - VDBG(common, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", - name, cmnd_size, dirletter[(int) data_dir], - common->data_size_from_cmnd, common->cmnd_size, hdlen); - - /* - * We can't reply at all until we know the correct data direction - * and size. - */ - if (common->data_size_from_cmnd == 0) - data_dir = DATA_DIR_NONE; - if (common->data_size < common->data_size_from_cmnd) { - /* - * Host data size < Device data size is a phase error. - * Carry out the command, but only transfer as much as - * we are allowed. - */ - common->data_size_from_cmnd = common->data_size; - common->phase_error = 1; - } - common->residue = common->data_size; - common->usb_amount_left = common->data_size; - - /* Conflicting data directions is a phase error */ - if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) { - common->phase_error = 1; - return -EINVAL; - } - - /* Verify the length of the command itself */ - if (cmnd_size != common->cmnd_size) { - - /* - * Special case workaround: There are plenty of buggy SCSI - * implementations. Many have issues with cbw->Length - * field passing a wrong command size. For those cases we - * always try to work around the problem by using the length - * sent by the host side provided it is at least as large - * as the correct command length. - * Examples of such cases would be MS-Windows, which issues - * REQUEST SENSE with cbw->Length == 12 where it should - * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and - * REQUEST SENSE with cbw->Length == 10 where it should - * be 6 as well. - */ - if (cmnd_size <= common->cmnd_size) { - DBG(common, "%s is buggy! Expected length %d " - "but we got %d\n", name, - cmnd_size, common->cmnd_size); - cmnd_size = common->cmnd_size; - } else { - common->phase_error = 1; - return -EINVAL; - } - } - - /* Check that the LUN values are consistent */ - if (common->lun != lun) - DBG(common, "using LUN %d from CBW, not LUN %d from CDB\n", - common->lun, lun); - - /* Check the LUN */ - curlun = common->curlun; - if (curlun) { - if (common->cmnd[0] != REQUEST_SENSE) { - curlun->sense_data = SS_NO_SENSE; - curlun->sense_data_info = 0; - curlun->info_valid = 0; - } - } else { - common->bad_lun_okay = 0; - - /* - * INQUIRY and REQUEST SENSE commands are explicitly allowed - * to use unsupported LUNs; all others may not. - */ - if (common->cmnd[0] != INQUIRY && - common->cmnd[0] != REQUEST_SENSE) { - DBG(common, "unsupported LUN %d\n", common->lun); - return -EINVAL; - } - } - - /* - * If a unit attention condition exists, only INQUIRY and - * REQUEST SENSE commands are allowed; anything else must fail. - */ - if (curlun && curlun->unit_attention_data != SS_NO_SENSE && - common->cmnd[0] != INQUIRY && - common->cmnd[0] != REQUEST_SENSE) { - curlun->sense_data = curlun->unit_attention_data; - curlun->unit_attention_data = SS_NO_SENSE; - return -EINVAL; - } - - /* Check that only command bytes listed in the mask are non-zero */ - common->cmnd[1] &= 0x1f; /* Mask away the LUN */ - for (i = 1; i < cmnd_size; ++i) { - if (common->cmnd[i] && !(mask & (1 << i))) { - if (curlun) - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - } - - /* If the medium isn't mounted and the command needs to access - * it, return an error. */ - if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { - curlun->sense_data = SS_MEDIUM_NOT_PRESENT; - return -EINVAL; - } - - return 0; -} - -/* wrapper of check_command for data size in blocks handling */ -static int check_command_size_in_blocks(struct fsg_common *common, - int cmnd_size, enum data_direction data_dir, - unsigned int mask, int needs_medium, const char *name) -{ - if (common->curlun) - common->data_size_from_cmnd <<= common->curlun->blkbits; - return check_command(common, cmnd_size, data_dir, - mask, needs_medium, name); -} - -static int do_scsi_command(struct fsg_common *common) -{ - struct fsg_buffhd *bh; - int rc; - int reply = -EINVAL; - int i; - static char unknown[16]; - - dump_cdb(common); - - /* Wait for the next buffer to become available for data or status */ - bh = common->next_buffhd_to_fill; - common->next_buffhd_to_drain = bh; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); - if (rc) - return rc; - } - common->phase_error = 0; - common->short_packet_received = 0; - - down_read(&common->filesem); /* We're using the backing file */ - switch (common->cmnd[0]) { - - case INQUIRY: - common->data_size_from_cmnd = common->cmnd[4]; - reply = check_command(common, 6, DATA_DIR_TO_HOST, - (1<<4), 0, - "INQUIRY"); - if (reply == 0) - reply = do_inquiry(common, bh); - break; - - case MODE_SELECT: - common->data_size_from_cmnd = common->cmnd[4]; - reply = check_command(common, 6, DATA_DIR_FROM_HOST, - (1<<1) | (1<<4), 0, - "MODE SELECT(6)"); - if (reply == 0) - reply = do_mode_select(common, bh); - break; - - case MODE_SELECT_10: - common->data_size_from_cmnd = - get_unaligned_be16(&common->cmnd[7]); - reply = check_command(common, 10, DATA_DIR_FROM_HOST, - (1<<1) | (3<<7), 0, - "MODE SELECT(10)"); - if (reply == 0) - reply = do_mode_select(common, bh); - break; - - case MODE_SENSE: - common->data_size_from_cmnd = common->cmnd[4]; - reply = check_command(common, 6, DATA_DIR_TO_HOST, - (1<<1) | (1<<2) | (1<<4), 0, - "MODE SENSE(6)"); - if (reply == 0) - reply = do_mode_sense(common, bh); - break; - - case MODE_SENSE_10: - common->data_size_from_cmnd = - get_unaligned_be16(&common->cmnd[7]); - reply = check_command(common, 10, DATA_DIR_TO_HOST, - (1<<1) | (1<<2) | (3<<7), 0, - "MODE SENSE(10)"); - if (reply == 0) - reply = do_mode_sense(common, bh); - break; - - case ALLOW_MEDIUM_REMOVAL: - common->data_size_from_cmnd = 0; - reply = check_command(common, 6, DATA_DIR_NONE, - (1<<4), 0, - "PREVENT-ALLOW MEDIUM REMOVAL"); - if (reply == 0) - reply = do_prevent_allow(common); - break; - - case READ_6: - i = common->cmnd[4]; - common->data_size_from_cmnd = (i == 0) ? 256 : i; - reply = check_command_size_in_blocks(common, 6, - DATA_DIR_TO_HOST, - (7<<1) | (1<<4), 1, - "READ(6)"); - if (reply == 0) - reply = do_read(common); - break; - - case READ_10: - common->data_size_from_cmnd = - get_unaligned_be16(&common->cmnd[7]); - reply = check_command_size_in_blocks(common, 10, - DATA_DIR_TO_HOST, - (1<<1) | (0xf<<2) | (3<<7), 1, - "READ(10)"); - if (reply == 0) - reply = do_read(common); - break; - - case READ_12: - common->data_size_from_cmnd = - get_unaligned_be32(&common->cmnd[6]); - reply = check_command_size_in_blocks(common, 12, - DATA_DIR_TO_HOST, - (1<<1) | (0xf<<2) | (0xf<<6), 1, - "READ(12)"); - if (reply == 0) - reply = do_read(common); - break; - - case READ_CAPACITY: - common->data_size_from_cmnd = 8; - reply = check_command(common, 10, DATA_DIR_TO_HOST, - (0xf<<2) | (1<<8), 1, - "READ CAPACITY"); - if (reply == 0) - reply = do_read_capacity(common, bh); - break; - - case READ_HEADER: - if (!common->curlun || !common->curlun->cdrom) - goto unknown_cmnd; - common->data_size_from_cmnd = - get_unaligned_be16(&common->cmnd[7]); - reply = check_command(common, 10, DATA_DIR_TO_HOST, - (3<<7) | (0x1f<<1), 1, - "READ HEADER"); - if (reply == 0) - reply = do_read_header(common, bh); - break; - - case READ_TOC: - if (!common->curlun || !common->curlun->cdrom) - goto unknown_cmnd; - common->data_size_from_cmnd = - get_unaligned_be16(&common->cmnd[7]); - reply = check_command(common, 10, DATA_DIR_TO_HOST, - (7<<6) | (1<<1), 1, - "READ TOC"); - if (reply == 0) - reply = do_read_toc(common, bh); - break; - - case READ_FORMAT_CAPACITIES: - common->data_size_from_cmnd = - get_unaligned_be16(&common->cmnd[7]); - reply = check_command(common, 10, DATA_DIR_TO_HOST, - (3<<7), 1, - "READ FORMAT CAPACITIES"); - if (reply == 0) - reply = do_read_format_capacities(common, bh); - break; - - case REQUEST_SENSE: - common->data_size_from_cmnd = common->cmnd[4]; - reply = check_command(common, 6, DATA_DIR_TO_HOST, - (1<<4), 0, - "REQUEST SENSE"); - if (reply == 0) - reply = do_request_sense(common, bh); - break; - - case START_STOP: - common->data_size_from_cmnd = 0; - reply = check_command(common, 6, DATA_DIR_NONE, - (1<<1) | (1<<4), 0, - "START-STOP UNIT"); - if (reply == 0) - reply = do_start_stop(common); - break; - - case SYNCHRONIZE_CACHE: - common->data_size_from_cmnd = 0; - reply = check_command(common, 10, DATA_DIR_NONE, - (0xf<<2) | (3<<7), 1, - "SYNCHRONIZE CACHE"); - if (reply == 0) - reply = do_synchronize_cache(common); - break; - - case TEST_UNIT_READY: - common->data_size_from_cmnd = 0; - reply = check_command(common, 6, DATA_DIR_NONE, - 0, 1, - "TEST UNIT READY"); - break; - - /* - * Although optional, this command is used by MS-Windows. We - * support a minimal version: BytChk must be 0. - */ - case VERIFY: - common->data_size_from_cmnd = 0; - reply = check_command(common, 10, DATA_DIR_NONE, - (1<<1) | (0xf<<2) | (3<<7), 1, - "VERIFY"); - if (reply == 0) - reply = do_verify(common); - break; - - case WRITE_6: - i = common->cmnd[4]; - common->data_size_from_cmnd = (i == 0) ? 256 : i; - reply = check_command_size_in_blocks(common, 6, - DATA_DIR_FROM_HOST, - (7<<1) | (1<<4), 1, - "WRITE(6)"); - if (reply == 0) - reply = do_write(common); - break; - - case WRITE_10: - common->data_size_from_cmnd = - get_unaligned_be16(&common->cmnd[7]); - reply = check_command_size_in_blocks(common, 10, - DATA_DIR_FROM_HOST, - (1<<1) | (0xf<<2) | (3<<7), 1, - "WRITE(10)"); - if (reply == 0) - reply = do_write(common); - break; - - case WRITE_12: - common->data_size_from_cmnd = - get_unaligned_be32(&common->cmnd[6]); - reply = check_command_size_in_blocks(common, 12, - DATA_DIR_FROM_HOST, - (1<<1) | (0xf<<2) | (0xf<<6), 1, - "WRITE(12)"); - if (reply == 0) - reply = do_write(common); - break; - - /* - * Some mandatory commands that we recognize but don't implement. - * They don't mean much in this setting. It's left as an exercise - * for anyone interested to implement RESERVE and RELEASE in terms - * of Posix locks. - */ - case FORMAT_UNIT: - case RELEASE: - case RESERVE: - case SEND_DIAGNOSTIC: - /* Fall through */ - - default: -unknown_cmnd: - common->data_size_from_cmnd = 0; - sprintf(unknown, "Unknown x%02x", common->cmnd[0]); - reply = check_command(common, common->cmnd_size, - DATA_DIR_UNKNOWN, ~0, 0, unknown); - if (reply == 0) { - common->curlun->sense_data = SS_INVALID_COMMAND; - reply = -EINVAL; - } - break; - } - up_read(&common->filesem); - - if (reply == -EINTR || signal_pending(current)) - return -EINTR; - - /* Set up the single reply buffer for finish_reply() */ - if (reply == -EINVAL) - reply = 0; /* Error reply length */ - if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) { - reply = min((u32)reply, common->data_size_from_cmnd); - bh->inreq->length = reply; - bh->state = BUF_STATE_FULL; - common->residue -= reply; - } /* Otherwise it's already set */ - - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct usb_request *req = bh->outreq; - struct bulk_cb_wrap *cbw = req->buf; - struct fsg_common *common = fsg->common; - - /* Was this a real packet? Should it be ignored? */ - if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) - return -EINVAL; - - /* Is the CBW valid? */ - if (req->actual != US_BULK_CB_WRAP_LEN || - cbw->Signature != cpu_to_le32( - US_BULK_CB_SIGN)) { - DBG(fsg, "invalid CBW: len %u sig 0x%x\n", - req->actual, - le32_to_cpu(cbw->Signature)); - - /* - * The Bulk-only spec says we MUST stall the IN endpoint - * (6.6.1), so it's unavoidable. It also says we must - * retain this state until the next reset, but there's - * no way to tell the controller driver it should ignore - * Clear-Feature(HALT) requests. - * - * We aren't required to halt the OUT endpoint; instead - * we can simply accept and discard any data received - * until the next reset. - */ - wedge_bulk_in_endpoint(fsg); - set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); - return -EINVAL; - } - - /* Is the CBW meaningful? */ - if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN || - cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { - DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " - "cmdlen %u\n", - cbw->Lun, cbw->Flags, cbw->Length); - - /* - * We can do anything we want here, so let's stall the - * bulk pipes if we are allowed to. - */ - if (common->can_stall) { - fsg_set_halt(fsg, fsg->bulk_out); - halt_bulk_in_endpoint(fsg); - } - return -EINVAL; - } - - /* Save the command for later */ - common->cmnd_size = cbw->Length; - memcpy(common->cmnd, cbw->CDB, common->cmnd_size); - if (cbw->Flags & US_BULK_FLAG_IN) - common->data_dir = DATA_DIR_TO_HOST; - else - common->data_dir = DATA_DIR_FROM_HOST; - common->data_size = le32_to_cpu(cbw->DataTransferLength); - if (common->data_size == 0) - common->data_dir = DATA_DIR_NONE; - common->lun = cbw->Lun; - if (common->lun >= 0 && common->lun < common->nluns) - common->curlun = &common->luns[common->lun]; - else - common->curlun = NULL; - common->tag = cbw->Tag; - return 0; -} - -static int get_next_command(struct fsg_common *common) -{ - struct fsg_buffhd *bh; - int rc = 0; - - /* Wait for the next buffer to become available */ - bh = common->next_buffhd_to_fill; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(common); - if (rc) - return rc; - } - - /* Queue a request to read a Bulk-only CBW */ - set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN); - if (!start_out_transfer(common, bh)) - /* Don't know what to do if common->fsg is NULL */ - return -EIO; - - /* - * We will drain the buffer in software, which means we - * can reuse it for the next filling. No need to advance - * next_buffhd_to_fill. - */ - - /* Wait for the CBW to arrive */ - while (bh->state != BUF_STATE_FULL) { - rc = sleep_thread(common); - if (rc) - return rc; - } - smp_rmb(); - rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO; - bh->state = BUF_STATE_EMPTY; - - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -static int alloc_request(struct fsg_common *common, struct usb_ep *ep, - struct usb_request **preq) -{ - *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); - if (*preq) - return 0; - ERROR(common, "can't allocate request for %s\n", ep->name); - return -ENOMEM; -} - -/* Reset interface setting and re-init endpoint state (toggle etc). */ -static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg) -{ - struct fsg_dev *fsg; - int i, rc = 0; - - if (common->running) - DBG(common, "reset interface\n"); - -reset: - /* Deallocate the requests */ - if (common->fsg) { - fsg = common->fsg; - - for (i = 0; i < fsg_num_buffers; ++i) { - struct fsg_buffhd *bh = &common->buffhds[i]; - - if (bh->inreq) { - usb_ep_free_request(fsg->bulk_in, bh->inreq); - bh->inreq = NULL; - } - if (bh->outreq) { - usb_ep_free_request(fsg->bulk_out, bh->outreq); - bh->outreq = NULL; - } - } - - /* Disable the endpoints */ - if (fsg->bulk_in_enabled) { - usb_ep_disable(fsg->bulk_in); - fsg->bulk_in_enabled = 0; - } - if (fsg->bulk_out_enabled) { - usb_ep_disable(fsg->bulk_out); - fsg->bulk_out_enabled = 0; - } - - common->fsg = NULL; - wake_up(&common->fsg_wait); - } - - common->running = 0; - if (!new_fsg || rc) - return rc; - - common->fsg = new_fsg; - fsg = common->fsg; - - /* Enable the endpoints */ - rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in); - if (rc) - goto reset; - rc = usb_ep_enable(fsg->bulk_in); - if (rc) - goto reset; - fsg->bulk_in->driver_data = common; - fsg->bulk_in_enabled = 1; - - rc = config_ep_by_speed(common->gadget, &(fsg->function), - fsg->bulk_out); - if (rc) - goto reset; - rc = usb_ep_enable(fsg->bulk_out); - if (rc) - goto reset; - fsg->bulk_out->driver_data = common; - fsg->bulk_out_enabled = 1; - common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc); - clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); - - /* Allocate the requests */ - for (i = 0; i < fsg_num_buffers; ++i) { - struct fsg_buffhd *bh = &common->buffhds[i]; - - rc = alloc_request(common, fsg->bulk_in, &bh->inreq); - if (rc) - goto reset; - rc = alloc_request(common, fsg->bulk_out, &bh->outreq); - if (rc) - goto reset; - bh->inreq->buf = bh->outreq->buf = bh->buf; - bh->inreq->context = bh->outreq->context = bh; - bh->inreq->complete = bulk_in_complete; - bh->outreq->complete = bulk_out_complete; - } - - common->running = 1; - for (i = 0; i < common->nluns; ++i) - common->luns[i].unit_attention_data = SS_RESET_OCCURRED; - return rc; -} - - -/****************************** ALT CONFIGS ******************************/ - -static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) -{ - struct fsg_dev *fsg = fsg_from_func(f); - fsg->common->new_fsg = fsg; - raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); - return USB_GADGET_DELAYED_STATUS; -} - -static void fsg_disable(struct usb_function *f) -{ - struct fsg_dev *fsg = fsg_from_func(f); - fsg->common->new_fsg = NULL; - raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); -} - - -/*-------------------------------------------------------------------------*/ - -static void handle_exception(struct fsg_common *common) -{ - siginfo_t info; - int i; - struct fsg_buffhd *bh; - enum fsg_state old_state; - struct fsg_lun *curlun; - unsigned int exception_req_tag; - - /* - * Clear the existing signals. Anything but SIGUSR1 is converted - * into a high-priority EXIT exception. - */ - for (;;) { - int sig = - dequeue_signal_lock(current, ¤t->blocked, &info); - if (!sig) - break; - if (sig != SIGUSR1) { - if (common->state < FSG_STATE_EXIT) - DBG(common, "Main thread exiting on signal\n"); - raise_exception(common, FSG_STATE_EXIT); - } - } - - /* Cancel all the pending transfers */ - if (likely(common->fsg)) { - for (i = 0; i < fsg_num_buffers; ++i) { - bh = &common->buffhds[i]; - if (bh->inreq_busy) - usb_ep_dequeue(common->fsg->bulk_in, bh->inreq); - if (bh->outreq_busy) - usb_ep_dequeue(common->fsg->bulk_out, - bh->outreq); - } - - /* Wait until everything is idle */ - for (;;) { - int num_active = 0; - for (i = 0; i < fsg_num_buffers; ++i) { - bh = &common->buffhds[i]; - num_active += bh->inreq_busy + bh->outreq_busy; - } - if (num_active == 0) - break; - if (sleep_thread(common)) - return; - } - - /* Clear out the controller's fifos */ - if (common->fsg->bulk_in_enabled) - usb_ep_fifo_flush(common->fsg->bulk_in); - if (common->fsg->bulk_out_enabled) - usb_ep_fifo_flush(common->fsg->bulk_out); - } - - /* - * Reset the I/O buffer states and pointers, the SCSI - * state, and the exception. Then invoke the handler. - */ - spin_lock_irq(&common->lock); - - for (i = 0; i < fsg_num_buffers; ++i) { - bh = &common->buffhds[i]; - bh->state = BUF_STATE_EMPTY; - } - common->next_buffhd_to_fill = &common->buffhds[0]; - common->next_buffhd_to_drain = &common->buffhds[0]; - exception_req_tag = common->exception_req_tag; - old_state = common->state; - - if (old_state == FSG_STATE_ABORT_BULK_OUT) - common->state = FSG_STATE_STATUS_PHASE; - else { - for (i = 0; i < common->nluns; ++i) { - curlun = &common->luns[i]; - curlun->prevent_medium_removal = 0; - curlun->sense_data = SS_NO_SENSE; - curlun->unit_attention_data = SS_NO_SENSE; - curlun->sense_data_info = 0; - curlun->info_valid = 0; - } - common->state = FSG_STATE_IDLE; - } - spin_unlock_irq(&common->lock); - - /* Carry out any extra actions required for the exception */ - switch (old_state) { - case FSG_STATE_ABORT_BULK_OUT: - send_status(common); - spin_lock_irq(&common->lock); - if (common->state == FSG_STATE_STATUS_PHASE) - common->state = FSG_STATE_IDLE; - spin_unlock_irq(&common->lock); - break; - - case FSG_STATE_RESET: - /* - * In case we were forced against our will to halt a - * bulk endpoint, clear the halt now. (The SuperH UDC - * requires this.) - */ - if (!fsg_is_set(common)) - break; - if (test_and_clear_bit(IGNORE_BULK_OUT, - &common->fsg->atomic_bitflags)) - usb_ep_clear_halt(common->fsg->bulk_in); - - if (common->ep0_req_tag == exception_req_tag) - ep0_queue(common); /* Complete the status stage */ - - /* - * Technically this should go here, but it would only be - * a waste of time. Ditto for the INTERFACE_CHANGE and - * CONFIG_CHANGE cases. - */ - /* for (i = 0; i < common->nluns; ++i) */ - /* common->luns[i].unit_attention_data = */ - /* SS_RESET_OCCURRED; */ - break; - - case FSG_STATE_CONFIG_CHANGE: - do_set_interface(common, common->new_fsg); - if (common->new_fsg) - usb_composite_setup_continue(common->cdev); - break; - - case FSG_STATE_EXIT: - case FSG_STATE_TERMINATED: - do_set_interface(common, NULL); /* Free resources */ - spin_lock_irq(&common->lock); - common->state = FSG_STATE_TERMINATED; /* Stop the thread */ - spin_unlock_irq(&common->lock); - break; - - case FSG_STATE_INTERFACE_CHANGE: - case FSG_STATE_DISCONNECT: - case FSG_STATE_COMMAND_PHASE: - case FSG_STATE_DATA_PHASE: - case FSG_STATE_STATUS_PHASE: - case FSG_STATE_IDLE: - break; - } -} - - -/*-------------------------------------------------------------------------*/ - -static int fsg_main_thread(void *common_) -{ - struct fsg_common *common = common_; - - /* - * Allow the thread to be killed by a signal, but set the signal mask - * to block everything but INT, TERM, KILL, and USR1. - */ - allow_signal(SIGINT); - allow_signal(SIGTERM); - allow_signal(SIGKILL); - allow_signal(SIGUSR1); - - /* Allow the thread to be frozen */ - set_freezable(); - - /* - * Arrange for userspace references to be interpreted as kernel - * pointers. That way we can pass a kernel pointer to a routine - * that expects a __user pointer and it will work okay. - */ - set_fs(get_ds()); - - /* The main loop */ - while (common->state != FSG_STATE_TERMINATED) { - if (exception_in_progress(common) || signal_pending(current)) { - handle_exception(common); - continue; - } - - if (!common->running) { - sleep_thread(common); - continue; - } - - if (get_next_command(common)) - continue; - - spin_lock_irq(&common->lock); - if (!exception_in_progress(common)) - common->state = FSG_STATE_DATA_PHASE; - spin_unlock_irq(&common->lock); - - if (do_scsi_command(common) || finish_reply(common)) - continue; - - spin_lock_irq(&common->lock); - if (!exception_in_progress(common)) - common->state = FSG_STATE_STATUS_PHASE; - spin_unlock_irq(&common->lock); - - if (send_status(common)) - continue; - - spin_lock_irq(&common->lock); - if (!exception_in_progress(common)) - common->state = FSG_STATE_IDLE; - spin_unlock_irq(&common->lock); - } - - spin_lock_irq(&common->lock); - common->thread_task = NULL; - spin_unlock_irq(&common->lock); - - if (!common->ops || !common->ops->thread_exits - || common->ops->thread_exits(common) < 0) { - struct fsg_lun *curlun = common->luns; - unsigned i = common->nluns; - - down_write(&common->filesem); - for (; i--; ++curlun) { - if (!fsg_lun_is_open(curlun)) - continue; - - fsg_lun_close(curlun); - curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; - } - up_write(&common->filesem); - } - - /* Let fsg_unbind() know the thread has exited */ - complete_and_exit(&common->thread_notifier, 0); -} - - -/*************************** DEVICE ATTRIBUTES ***************************/ - -static DEVICE_ATTR(ro, 0644, fsg_show_ro, fsg_store_ro); -static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, fsg_store_nofua); -static DEVICE_ATTR(file, 0644, fsg_show_file, fsg_store_file); - -static struct device_attribute dev_attr_ro_cdrom = - __ATTR(ro, 0444, fsg_show_ro, NULL); -static struct device_attribute dev_attr_file_nonremovable = - __ATTR(file, 0444, fsg_show_file, NULL); - - -/****************************** FSG COMMON ******************************/ - -static void fsg_common_release(struct kref *ref); - -static void fsg_lun_release(struct device *dev) -{ - /* Nothing needs to be done */ -} - -static inline void fsg_common_get(struct fsg_common *common) -{ - kref_get(&common->ref); -} - -static inline void fsg_common_put(struct fsg_common *common) -{ - kref_put(&common->ref, fsg_common_release); -} - -static struct fsg_common *fsg_common_init(struct fsg_common *common, - struct usb_composite_dev *cdev, - struct fsg_config *cfg) -{ - struct usb_gadget *gadget = cdev->gadget; - struct fsg_buffhd *bh; - struct fsg_lun *curlun; - struct fsg_lun_config *lcfg; - int nluns, i, rc; - char *pathbuf; - - rc = fsg_num_buffers_validate(); - if (rc != 0) - return ERR_PTR(rc); - - /* Find out how many LUNs there should be */ - nluns = cfg->nluns; - if (nluns < 1 || nluns > FSG_MAX_LUNS) { - dev_err(&gadget->dev, "invalid number of LUNs: %u\n", nluns); - return ERR_PTR(-EINVAL); - } - - /* Allocate? */ - if (!common) { - common = kzalloc(sizeof *common, GFP_KERNEL); - if (!common) - return ERR_PTR(-ENOMEM); - common->free_storage_on_release = 1; - } else { - memset(common, 0, sizeof *common); - common->free_storage_on_release = 0; - } - - common->buffhds = kcalloc(fsg_num_buffers, - sizeof *(common->buffhds), GFP_KERNEL); - if (!common->buffhds) { - if (common->free_storage_on_release) - kfree(common); - return ERR_PTR(-ENOMEM); - } - - common->ops = cfg->ops; - common->private_data = cfg->private_data; - - common->gadget = gadget; - common->ep0 = gadget->ep0; - common->ep0req = cdev->req; - common->cdev = cdev; - - /* Maybe allocate device-global string IDs, and patch descriptors */ - if (fsg_strings[FSG_STRING_INTERFACE].id == 0) { - rc = usb_string_id(cdev); - if (unlikely(rc < 0)) - goto error_release; - fsg_strings[FSG_STRING_INTERFACE].id = rc; - fsg_intf_desc.iInterface = rc; - } - - /* - * Create the LUNs, open their backing files, and register the - * LUN devices in sysfs. - */ - curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL); - if (unlikely(!curlun)) { - rc = -ENOMEM; - goto error_release; - } - common->luns = curlun; - - init_rwsem(&common->filesem); - - for (i = 0, lcfg = cfg->luns; i < nluns; ++i, ++curlun, ++lcfg) { - curlun->cdrom = !!lcfg->cdrom; - curlun->ro = lcfg->cdrom || lcfg->ro; - curlun->initially_ro = curlun->ro; - curlun->removable = lcfg->removable; - curlun->dev.release = fsg_lun_release; - curlun->dev.parent = &gadget->dev; - /* curlun->dev.driver = &fsg_driver.driver; XXX */ - dev_set_drvdata(&curlun->dev, &common->filesem); - dev_set_name(&curlun->dev, "lun%d", i); - - rc = device_register(&curlun->dev); - if (rc) { - INFO(common, "failed to register LUN%d: %d\n", i, rc); - common->nluns = i; - put_device(&curlun->dev); - goto error_release; - } - - rc = device_create_file(&curlun->dev, - curlun->cdrom - ? &dev_attr_ro_cdrom - : &dev_attr_ro); - if (rc) - goto error_luns; - rc = device_create_file(&curlun->dev, - curlun->removable - ? &dev_attr_file - : &dev_attr_file_nonremovable); - if (rc) - goto error_luns; - rc = device_create_file(&curlun->dev, &dev_attr_nofua); - if (rc) - goto error_luns; - - if (lcfg->filename) { - rc = fsg_lun_open(curlun, lcfg->filename); - if (rc) - goto error_luns; - } else if (!curlun->removable) { - ERROR(common, "no file given for LUN%d\n", i); - rc = -EINVAL; - goto error_luns; - } - } - common->nluns = nluns; - - /* Data buffers cyclic list */ - bh = common->buffhds; - i = fsg_num_buffers; - goto buffhds_first_it; - do { - bh->next = bh + 1; - ++bh; -buffhds_first_it: - bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL); - if (unlikely(!bh->buf)) { - rc = -ENOMEM; - goto error_release; - } - } while (--i); - bh->next = common->buffhds; - - /* Prepare inquiryString */ - if (cfg->release != 0xffff) { - i = cfg->release; - } else { - i = usb_gadget_controller_number(gadget); - if (i >= 0) { - i = 0x0300 + i; - } else { - WARNING(common, "controller '%s' not recognized\n", - gadget->name); - i = 0x0399; - } - } - snprintf(common->inquiry_string, sizeof common->inquiry_string, - "%-8s%-16s%04x", cfg->vendor_name ?: "Linux", - /* Assume product name dependent on the first LUN */ - cfg->product_name ?: (common->luns->cdrom - ? "File-Stor Gadget" - : "File-CD Gadget"), - i); - - /* - * Some peripheral controllers are known not to be able to - * halt bulk endpoints correctly. If one of them is present, - * disable stalls. - */ - common->can_stall = cfg->can_stall && - !(gadget_is_at91(common->gadget)); - - spin_lock_init(&common->lock); - kref_init(&common->ref); - - /* Tell the thread to start working */ - common->thread_task = - kthread_create(fsg_main_thread, common, "file-storage"); - if (IS_ERR(common->thread_task)) { - rc = PTR_ERR(common->thread_task); - goto error_release; - } - init_completion(&common->thread_notifier); - init_waitqueue_head(&common->fsg_wait); - - /* Information */ - INFO(common, FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n"); - INFO(common, "Number of LUNs=%d\n", common->nluns); - - pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); - for (i = 0, nluns = common->nluns, curlun = common->luns; - i < nluns; - ++curlun, ++i) { - char *p = "(no medium)"; - if (fsg_lun_is_open(curlun)) { - p = "(error)"; - if (pathbuf) { - p = d_path(&curlun->filp->f_path, - pathbuf, PATH_MAX); - if (IS_ERR(p)) - p = "(error)"; - } - } - LINFO(curlun, "LUN: %s%s%sfile: %s\n", - curlun->removable ? "removable " : "", - curlun->ro ? "read only " : "", - curlun->cdrom ? "CD-ROM " : "", - p); - } - kfree(pathbuf); - - DBG(common, "I/O thread pid: %d\n", task_pid_nr(common->thread_task)); - - wake_up_process(common->thread_task); - - return common; - -error_luns: - common->nluns = i + 1; -error_release: - common->state = FSG_STATE_TERMINATED; /* The thread is dead */ - /* Call fsg_common_release() directly, ref might be not initialised. */ - fsg_common_release(&common->ref); - return ERR_PTR(rc); -} - -static void fsg_common_release(struct kref *ref) -{ - struct fsg_common *common = container_of(ref, struct fsg_common, ref); - - /* If the thread isn't already dead, tell it to exit now */ - if (common->state != FSG_STATE_TERMINATED) { - raise_exception(common, FSG_STATE_EXIT); - wait_for_completion(&common->thread_notifier); - } - - if (likely(common->luns)) { - struct fsg_lun *lun = common->luns; - unsigned i = common->nluns; - - /* In error recovery common->nluns may be zero. */ - for (; i; --i, ++lun) { - device_remove_file(&lun->dev, &dev_attr_nofua); - device_remove_file(&lun->dev, - lun->cdrom - ? &dev_attr_ro_cdrom - : &dev_attr_ro); - device_remove_file(&lun->dev, - lun->removable - ? &dev_attr_file - : &dev_attr_file_nonremovable); - fsg_lun_close(lun); - device_unregister(&lun->dev); - } - - kfree(common->luns); - } - - { - struct fsg_buffhd *bh = common->buffhds; - unsigned i = fsg_num_buffers; - do { - kfree(bh->buf); - } while (++bh, --i); - } - - kfree(common->buffhds); - if (common->free_storage_on_release) - kfree(common); -} - - -/*-------------------------------------------------------------------------*/ - -static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) -{ - struct fsg_dev *fsg = fsg_from_func(f); - struct fsg_common *common = fsg->common; - - DBG(fsg, "unbind\n"); - if (fsg->common->fsg == fsg) { - fsg->common->new_fsg = NULL; - raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); - /* FIXME: make interruptible or killable somehow? */ - wait_event(common->fsg_wait, common->fsg != fsg); - } - - fsg_common_put(common); - usb_free_descriptors(fsg->function.descriptors); - usb_free_descriptors(fsg->function.hs_descriptors); - usb_free_descriptors(fsg->function.ss_descriptors); - kfree(fsg); -} - -static int fsg_bind(struct usb_configuration *c, struct usb_function *f) -{ - struct fsg_dev *fsg = fsg_from_func(f); - struct usb_gadget *gadget = c->cdev->gadget; - int i; - struct usb_ep *ep; - - fsg->gadget = gadget; - - /* New interface */ - i = usb_interface_id(c, f); - if (i < 0) - return i; - fsg_intf_desc.bInterfaceNumber = i; - fsg->interface_number = i; - - /* Find all the endpoints we will use */ - ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); - if (!ep) - goto autoconf_fail; - ep->driver_data = fsg->common; /* claim the endpoint */ - fsg->bulk_in = ep; - - ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); - if (!ep) - goto autoconf_fail; - ep->driver_data = fsg->common; /* claim the endpoint */ - fsg->bulk_out = ep; - - /* Copy descriptors */ - f->descriptors = usb_copy_descriptors(fsg_fs_function); - if (unlikely(!f->descriptors)) - return -ENOMEM; - - if (gadget_is_dualspeed(gadget)) { - /* Assume endpoint addresses are the same for both speeds */ - fsg_hs_bulk_in_desc.bEndpointAddress = - fsg_fs_bulk_in_desc.bEndpointAddress; - fsg_hs_bulk_out_desc.bEndpointAddress = - fsg_fs_bulk_out_desc.bEndpointAddress; - f->hs_descriptors = usb_copy_descriptors(fsg_hs_function); - if (unlikely(!f->hs_descriptors)) { - usb_free_descriptors(f->descriptors); - return -ENOMEM; - } - } - - if (gadget_is_superspeed(gadget)) { - unsigned max_burst; - - /* Calculate bMaxBurst, we know packet size is 1024 */ - max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15); - - fsg_ss_bulk_in_desc.bEndpointAddress = - fsg_fs_bulk_in_desc.bEndpointAddress; - fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; - - fsg_ss_bulk_out_desc.bEndpointAddress = - fsg_fs_bulk_out_desc.bEndpointAddress; - fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; - - f->ss_descriptors = usb_copy_descriptors(fsg_ss_function); - if (unlikely(!f->ss_descriptors)) { - usb_free_descriptors(f->hs_descriptors); - usb_free_descriptors(f->descriptors); - return -ENOMEM; - } - } - - return 0; - -autoconf_fail: - ERROR(fsg, "unable to autoconfigure all endpoints\n"); - return -ENOTSUPP; -} - - -/****************************** ADD FUNCTION ******************************/ - -static struct usb_gadget_strings *fsg_strings_array[] = { - &fsg_stringtab, - NULL, -}; - -static int fsg_bind_config(struct usb_composite_dev *cdev, - struct usb_configuration *c, - struct fsg_common *common) -{ - struct fsg_dev *fsg; - int rc; - - fsg = kzalloc(sizeof *fsg, GFP_KERNEL); - if (unlikely(!fsg)) - return -ENOMEM; - - fsg->function.name = FSG_DRIVER_DESC; - fsg->function.strings = fsg_strings_array; - fsg->function.bind = fsg_bind; - fsg->function.unbind = fsg_unbind; - fsg->function.setup = fsg_setup; - fsg->function.set_alt = fsg_set_alt; - fsg->function.disable = fsg_disable; - - fsg->common = common; - /* - * Our caller holds a reference to common structure so we - * don't have to be worry about it being freed until we return - * from this function. So instead of incrementing counter now - * and decrement in error recovery we increment it only when - * call to usb_add_function() was successful. - */ - - rc = usb_add_function(c, &fsg->function); - if (unlikely(rc)) - kfree(fsg); - else - fsg_common_get(fsg->common); - return rc; -} - - -/************************* Module parameters *************************/ - -struct fsg_module_parameters { - char *file[FSG_MAX_LUNS]; - bool ro[FSG_MAX_LUNS]; - bool removable[FSG_MAX_LUNS]; - bool cdrom[FSG_MAX_LUNS]; - bool nofua[FSG_MAX_LUNS]; - - unsigned int file_count, ro_count, removable_count, cdrom_count; - unsigned int nofua_count; - unsigned int luns; /* nluns */ - bool stall; /* can_stall */ -}; - -#define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc) \ - module_param_array_named(prefix ## name, params.name, type, \ - &prefix ## params.name ## _count, \ - S_IRUGO); \ - MODULE_PARM_DESC(prefix ## name, desc) - -#define _FSG_MODULE_PARAM(prefix, params, name, type, desc) \ - module_param_named(prefix ## name, params.name, type, \ - S_IRUGO); \ - MODULE_PARM_DESC(prefix ## name, desc) - -#define FSG_MODULE_PARAMETERS(prefix, params) \ - _FSG_MODULE_PARAM_ARRAY(prefix, params, file, charp, \ - "names of backing files or devices"); \ - _FSG_MODULE_PARAM_ARRAY(prefix, params, ro, bool, \ - "true to force read-only"); \ - _FSG_MODULE_PARAM_ARRAY(prefix, params, removable, bool, \ - "true to simulate removable media"); \ - _FSG_MODULE_PARAM_ARRAY(prefix, params, cdrom, bool, \ - "true to simulate CD-ROM instead of disk"); \ - _FSG_MODULE_PARAM_ARRAY(prefix, params, nofua, bool, \ - "true to ignore SCSI WRITE(10,12) FUA bit"); \ - _FSG_MODULE_PARAM(prefix, params, luns, uint, \ - "number of LUNs"); \ - _FSG_MODULE_PARAM(prefix, params, stall, bool, \ - "false to prevent bulk stalls") - -static void -fsg_config_from_params(struct fsg_config *cfg, - const struct fsg_module_parameters *params) -{ - struct fsg_lun_config *lun; - unsigned i; - - /* Configure LUNs */ - cfg->nluns = - min(params->luns ?: (params->file_count ?: 1u), - (unsigned)FSG_MAX_LUNS); - for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) { - lun->ro = !!params->ro[i]; - lun->cdrom = !!params->cdrom[i]; - lun->removable = !!params->removable[i]; - lun->filename = - params->file_count > i && params->file[i][0] - ? params->file[i] - : 0; - } - - /* Let MSF use defaults */ - cfg->vendor_name = 0; - cfg->product_name = 0; - cfg->release = 0xffff; - - cfg->ops = NULL; - cfg->private_data = NULL; - - /* Finalise */ - cfg->can_stall = params->stall; -} - -static inline struct fsg_common * -fsg_common_from_params(struct fsg_common *common, - struct usb_composite_dev *cdev, - const struct fsg_module_parameters *params) - __attribute__((unused)); -static inline struct fsg_common * -fsg_common_from_params(struct fsg_common *common, - struct usb_composite_dev *cdev, - const struct fsg_module_parameters *params) -{ - struct fsg_config cfg; - fsg_config_from_params(&cfg, params); - return fsg_common_init(common, cdev, &cfg); -} diff --git a/drivers/staging/ccg/f_rndis.c b/drivers/staging/ccg/f_rndis.c deleted file mode 100644 index b1681e45aca..00000000000 --- a/drivers/staging/ccg/f_rndis.c +++ /dev/null @@ -1,918 +0,0 @@ -/* - * f_rndis.c -- RNDIS link function driver - * - * Copyright (C) 2003-2005,2008 David Brownell - * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger - * Copyright (C) 2008 Nokia Corporation - * Copyright (C) 2009 Samsung Electronics - * Author: Michal Nazarewicz (mina86@mina86.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* #define VERBOSE_DEBUG */ - -#include -#include -#include -#include - -#include - -#include "u_ether.h" -#include "rndis.h" - - -/* - * This function is an RNDIS Ethernet port -- a Microsoft protocol that's - * been promoted instead of the standard CDC Ethernet. The published RNDIS - * spec is ambiguous, incomplete, and needlessly complex. Variants such as - * ActiveSync have even worse status in terms of specification. - * - * In short: it's a protocol controlled by (and for) Microsoft, not for an - * Open ecosystem or markets. Linux supports it *only* because Microsoft - * doesn't support the CDC Ethernet standard. - * - * The RNDIS data transfer model is complex, with multiple Ethernet packets - * per USB message, and out of band data. The control model is built around - * what's essentially an "RNDIS RPC" protocol. It's all wrapped in a CDC ACM - * (modem, not Ethernet) veneer, with those ACM descriptors being entirely - * useless (they're ignored). RNDIS expects to be the only function in its - * configuration, so it's no real help if you need composite devices; and - * it expects to be the first configuration too. - * - * There is a single technical advantage of RNDIS over CDC Ethernet, if you - * discount the fluff that its RPC can be made to deliver: it doesn't need - * a NOP altsetting for the data interface. That lets it work on some of the - * "so smart it's stupid" hardware which takes over configuration changes - * from the software, and adds restrictions like "no altsettings". - * - * Unfortunately MSFT's RNDIS drivers are buggy. They hang or oops, and - * have all sorts of contrary-to-specification oddities that can prevent - * them from working sanely. Since bugfixes (or accurate specs, letting - * Linux work around those bugs) are unlikely to ever come from MSFT, you - * may want to avoid using RNDIS on purely operational grounds. - * - * Omissions from the RNDIS 1.0 specification include: - * - * - Power management ... references data that's scattered around lots - * of other documentation, which is incorrect/incomplete there too. - * - * - There are various undocumented protocol requirements, like the need - * to send garbage in some control-OUT messages. - * - * - MS-Windows drivers sometimes emit undocumented requests. - */ - -struct f_rndis { - struct gether port; - u8 ctrl_id, data_id; - u8 ethaddr[ETH_ALEN]; - u32 vendorID; - const char *manufacturer; - int config; - - struct usb_ep *notify; - struct usb_request *notify_req; - atomic_t notify_count; -}; - -static inline struct f_rndis *func_to_rndis(struct usb_function *f) -{ - return container_of(f, struct f_rndis, port.func); -} - -/* peak (theoretical) bulk transfer rate in bits-per-second */ -static unsigned int bitrate(struct usb_gadget *g) -{ - if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) - return 13 * 1024 * 8 * 1000 * 8; - else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) - return 13 * 512 * 8 * 1000 * 8; - else - return 19 * 64 * 1 * 1000 * 8; -} - -/*-------------------------------------------------------------------------*/ - -/* - */ - -#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */ -#define STATUS_BYTECOUNT 8 /* 8 bytes data */ - - -/* interface descriptor: */ - -static struct usb_interface_descriptor rndis_control_intf = { - .bLength = sizeof rndis_control_intf, - .bDescriptorType = USB_DT_INTERFACE, - - /* .bInterfaceNumber = DYNAMIC */ - /* status endpoint is optional; this could be patched later */ - .bNumEndpoints = 1, - .bInterfaceClass = USB_CLASS_COMM, - .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, - .bInterfaceProtocol = USB_CDC_ACM_PROTO_VENDOR, - /* .iInterface = DYNAMIC */ -}; - -static struct usb_cdc_header_desc header_desc = { - .bLength = sizeof header_desc, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubType = USB_CDC_HEADER_TYPE, - - .bcdCDC = cpu_to_le16(0x0110), -}; - -static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = { - .bLength = sizeof call_mgmt_descriptor, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, - - .bmCapabilities = 0x00, - .bDataInterface = 0x01, -}; - -static struct usb_cdc_acm_descriptor rndis_acm_descriptor = { - .bLength = sizeof rndis_acm_descriptor, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubType = USB_CDC_ACM_TYPE, - - .bmCapabilities = 0x00, -}; - -static struct usb_cdc_union_desc rndis_union_desc = { - .bLength = sizeof(rndis_union_desc), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubType = USB_CDC_UNION_TYPE, - /* .bMasterInterface0 = DYNAMIC */ - /* .bSlaveInterface0 = DYNAMIC */ -}; - -/* the data interface has two bulk endpoints */ - -static struct usb_interface_descriptor rndis_data_intf = { - .bLength = sizeof rndis_data_intf, - .bDescriptorType = USB_DT_INTERFACE, - - /* .bInterfaceNumber = DYNAMIC */ - .bNumEndpoints = 2, - .bInterfaceClass = USB_CLASS_CDC_DATA, - .bInterfaceSubClass = 0, - .bInterfaceProtocol = 0, - /* .iInterface = DYNAMIC */ -}; - - -static struct usb_interface_assoc_descriptor -rndis_iad_descriptor = { - .bLength = sizeof rndis_iad_descriptor, - .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION, - - .bFirstInterface = 0, /* XXX, hardcoded */ - .bInterfaceCount = 2, // control + data - .bFunctionClass = USB_CLASS_COMM, - .bFunctionSubClass = USB_CDC_SUBCLASS_ETHERNET, - .bFunctionProtocol = USB_CDC_PROTO_NONE, - /* .iFunction = DYNAMIC */ -}; - -/* full speed support: */ - -static struct usb_endpoint_descriptor fs_notify_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), - .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC, -}; - -static struct usb_endpoint_descriptor fs_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_BULK, -}; - -static struct usb_endpoint_descriptor fs_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, -}; - -static struct usb_descriptor_header *eth_fs_function[] = { - (struct usb_descriptor_header *) &rndis_iad_descriptor, - - /* control interface matches ACM, not Ethernet */ - (struct usb_descriptor_header *) &rndis_control_intf, - (struct usb_descriptor_header *) &header_desc, - (struct usb_descriptor_header *) &call_mgmt_descriptor, - (struct usb_descriptor_header *) &rndis_acm_descriptor, - (struct usb_descriptor_header *) &rndis_union_desc, - (struct usb_descriptor_header *) &fs_notify_desc, - - /* data interface has no altsetting */ - (struct usb_descriptor_header *) &rndis_data_intf, - (struct usb_descriptor_header *) &fs_in_desc, - (struct usb_descriptor_header *) &fs_out_desc, - NULL, -}; - -/* high speed support: */ - -static struct usb_endpoint_descriptor hs_notify_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), - .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, -}; - -static struct usb_endpoint_descriptor hs_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512), -}; - -static struct usb_endpoint_descriptor hs_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512), -}; - -static struct usb_descriptor_header *eth_hs_function[] = { - (struct usb_descriptor_header *) &rndis_iad_descriptor, - - /* control interface matches ACM, not Ethernet */ - (struct usb_descriptor_header *) &rndis_control_intf, - (struct usb_descriptor_header *) &header_desc, - (struct usb_descriptor_header *) &call_mgmt_descriptor, - (struct usb_descriptor_header *) &rndis_acm_descriptor, - (struct usb_descriptor_header *) &rndis_union_desc, - (struct usb_descriptor_header *) &hs_notify_desc, - - /* data interface has no altsetting */ - (struct usb_descriptor_header *) &rndis_data_intf, - (struct usb_descriptor_header *) &hs_in_desc, - (struct usb_descriptor_header *) &hs_out_desc, - NULL, -}; - -/* super speed support: */ - -static struct usb_endpoint_descriptor ss_notify_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), - .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, -}; - -static struct usb_ss_ep_comp_descriptor ss_intr_comp_desc = { - .bLength = sizeof ss_intr_comp_desc, - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, - - /* the following 3 values can be tweaked if necessary */ - /* .bMaxBurst = 0, */ - /* .bmAttributes = 0, */ - .wBytesPerInterval = cpu_to_le16(STATUS_BYTECOUNT), -}; - -static struct usb_endpoint_descriptor ss_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(1024), -}; - -static struct usb_endpoint_descriptor ss_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(1024), -}; - -static struct usb_ss_ep_comp_descriptor ss_bulk_comp_desc = { - .bLength = sizeof ss_bulk_comp_desc, - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, - - /* the following 2 values can be tweaked if necessary */ - /* .bMaxBurst = 0, */ - /* .bmAttributes = 0, */ -}; - -static struct usb_descriptor_header *eth_ss_function[] = { - (struct usb_descriptor_header *) &rndis_iad_descriptor, - - /* control interface matches ACM, not Ethernet */ - (struct usb_descriptor_header *) &rndis_control_intf, - (struct usb_descriptor_header *) &header_desc, - (struct usb_descriptor_header *) &call_mgmt_descriptor, - (struct usb_descriptor_header *) &rndis_acm_descriptor, - (struct usb_descriptor_header *) &rndis_union_desc, - (struct usb_descriptor_header *) &ss_notify_desc, - (struct usb_descriptor_header *) &ss_intr_comp_desc, - - /* data interface has no altsetting */ - (struct usb_descriptor_header *) &rndis_data_intf, - (struct usb_descriptor_header *) &ss_in_desc, - (struct usb_descriptor_header *) &ss_bulk_comp_desc, - (struct usb_descriptor_header *) &ss_out_desc, - (struct usb_descriptor_header *) &ss_bulk_comp_desc, - NULL, -}; - -/* string descriptors: */ - -static struct usb_string rndis_string_defs[] = { - [0].s = "RNDIS Communications Control", - [1].s = "RNDIS Ethernet Data", - [2].s = "RNDIS", - { } /* end of list */ -}; - -static struct usb_gadget_strings rndis_string_table = { - .language = 0x0409, /* en-us */ - .strings = rndis_string_defs, -}; - -static struct usb_gadget_strings *rndis_strings[] = { - &rndis_string_table, - NULL, -}; - -/*-------------------------------------------------------------------------*/ - -static struct sk_buff *rndis_add_header(struct gether *port, - struct sk_buff *skb) -{ - struct sk_buff *skb2; - - skb2 = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type)); - if (skb2) - rndis_add_hdr(skb2); - - dev_kfree_skb_any(skb); - return skb2; -} - -static void rndis_response_available(void *_rndis) -{ - struct f_rndis *rndis = _rndis; - struct usb_request *req = rndis->notify_req; - struct usb_composite_dev *cdev = rndis->port.func.config->cdev; - __le32 *data = req->buf; - int status; - - if (atomic_inc_return(&rndis->notify_count) != 1) - return; - - /* Send RNDIS RESPONSE_AVAILABLE notification; a - * USB_CDC_NOTIFY_RESPONSE_AVAILABLE "should" work too - * - * This is the only notification defined by RNDIS. - */ - data[0] = cpu_to_le32(1); - data[1] = cpu_to_le32(0); - - status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC); - if (status) { - atomic_dec(&rndis->notify_count); - DBG(cdev, "notify/0 --> %d\n", status); - } -} - -static void rndis_response_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct f_rndis *rndis = req->context; - struct usb_composite_dev *cdev = rndis->port.func.config->cdev; - int status = req->status; - - /* after TX: - * - USB_CDC_GET_ENCAPSULATED_RESPONSE (ep0/control) - * - RNDIS_RESPONSE_AVAILABLE (status/irq) - */ - switch (status) { - case -ECONNRESET: - case -ESHUTDOWN: - /* connection gone */ - atomic_set(&rndis->notify_count, 0); - break; - default: - DBG(cdev, "RNDIS %s response error %d, %d/%d\n", - ep->name, status, - req->actual, req->length); - /* FALLTHROUGH */ - case 0: - if (ep != rndis->notify) - break; - - /* handle multiple pending RNDIS_RESPONSE_AVAILABLE - * notifications by resending until we're done - */ - if (atomic_dec_and_test(&rndis->notify_count)) - break; - status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC); - if (status) { - atomic_dec(&rndis->notify_count); - DBG(cdev, "notify/1 --> %d\n", status); - } - break; - } -} - -static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct f_rndis *rndis = req->context; - struct usb_composite_dev *cdev = rndis->port.func.config->cdev; - int status; - - /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */ -// spin_lock(&dev->lock); - status = rndis_msg_parser(rndis->config, (u8 *) req->buf); - if (status < 0) - ERROR(cdev, "RNDIS command error %d, %d/%d\n", - status, req->actual, req->length); -// spin_unlock(&dev->lock); -} - -static int -rndis_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) -{ - struct f_rndis *rndis = func_to_rndis(f); - struct usb_composite_dev *cdev = f->config->cdev; - struct usb_request *req = cdev->req; - int value = -EOPNOTSUPP; - u16 w_index = le16_to_cpu(ctrl->wIndex); - u16 w_value = le16_to_cpu(ctrl->wValue); - u16 w_length = le16_to_cpu(ctrl->wLength); - - /* composite driver infrastructure handles everything except - * CDC class messages; interface activation uses set_alt(). - */ - switch ((ctrl->bRequestType << 8) | ctrl->bRequest) { - - /* RNDIS uses the CDC command encapsulation mechanism to implement - * an RPC scheme, with much getting/setting of attributes by OID. - */ - case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) - | USB_CDC_SEND_ENCAPSULATED_COMMAND: - if (w_value || w_index != rndis->ctrl_id) - goto invalid; - /* read the request; process it later */ - value = w_length; - req->complete = rndis_command_complete; - req->context = rndis; - /* later, rndis_response_available() sends a notification */ - break; - - case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) - | USB_CDC_GET_ENCAPSULATED_RESPONSE: - if (w_value || w_index != rndis->ctrl_id) - goto invalid; - else { - u8 *buf; - u32 n; - - /* return the result */ - buf = rndis_get_next_response(rndis->config, &n); - if (buf) { - memcpy(req->buf, buf, n); - req->complete = rndis_response_complete; - req->context = rndis; - rndis_free_response(rndis->config, buf); - value = n; - } - /* else stalls ... spec says to avoid that */ - } - break; - - default: -invalid: - VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", - ctrl->bRequestType, ctrl->bRequest, - w_value, w_index, w_length); - } - - /* respond with data transfer or status phase? */ - if (value >= 0) { - DBG(cdev, "rndis req%02x.%02x v%04x i%04x l%d\n", - ctrl->bRequestType, ctrl->bRequest, - w_value, w_index, w_length); - req->zero = (value < w_length); - req->length = value; - value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); - if (value < 0) - ERROR(cdev, "rndis response on err %d\n", value); - } - - /* device either stalls (value < 0) or reports success */ - return value; -} - - -static int rndis_set_alt(struct usb_function *f, unsigned intf, unsigned alt) -{ - struct f_rndis *rndis = func_to_rndis(f); - struct usb_composite_dev *cdev = f->config->cdev; - - /* we know alt == 0 */ - - if (intf == rndis->ctrl_id) { - if (rndis->notify->driver_data) { - VDBG(cdev, "reset rndis control %d\n", intf); - usb_ep_disable(rndis->notify); - } - if (!rndis->notify->desc) { - VDBG(cdev, "init rndis ctrl %d\n", intf); - if (config_ep_by_speed(cdev->gadget, f, rndis->notify)) - goto fail; - } - usb_ep_enable(rndis->notify); - rndis->notify->driver_data = rndis; - - } else if (intf == rndis->data_id) { - struct net_device *net; - - if (rndis->port.in_ep->driver_data) { - DBG(cdev, "reset rndis\n"); - gether_disconnect(&rndis->port); - } - - if (!rndis->port.in_ep->desc || !rndis->port.out_ep->desc) { - DBG(cdev, "init rndis\n"); - if (config_ep_by_speed(cdev->gadget, f, - rndis->port.in_ep) || - config_ep_by_speed(cdev->gadget, f, - rndis->port.out_ep)) { - rndis->port.in_ep->desc = NULL; - rndis->port.out_ep->desc = NULL; - goto fail; - } - } - - /* Avoid ZLPs; they can be troublesome. */ - rndis->port.is_zlp_ok = false; - - /* RNDIS should be in the "RNDIS uninitialized" state, - * either never activated or after rndis_uninit(). - * - * We don't want data to flow here until a nonzero packet - * filter is set, at which point it enters "RNDIS data - * initialized" state ... but we do want the endpoints - * to be activated. It's a strange little state. - * - * REVISIT the RNDIS gadget code has done this wrong for a - * very long time. We need another call to the link layer - * code -- gether_updown(...bool) maybe -- to do it right. - */ - rndis->port.cdc_filter = 0; - - DBG(cdev, "RNDIS RX/TX early activation ... \n"); - net = gether_connect(&rndis->port); - if (IS_ERR(net)) - return PTR_ERR(net); - - rndis_set_param_dev(rndis->config, net, - &rndis->port.cdc_filter); - } else - goto fail; - - return 0; -fail: - return -EINVAL; -} - -static void rndis_disable(struct usb_function *f) -{ - struct f_rndis *rndis = func_to_rndis(f); - struct usb_composite_dev *cdev = f->config->cdev; - - if (!rndis->notify->driver_data) - return; - - DBG(cdev, "rndis deactivated\n"); - - rndis_uninit(rndis->config); - gether_disconnect(&rndis->port); - - usb_ep_disable(rndis->notify); - rndis->notify->driver_data = NULL; -} - -/*-------------------------------------------------------------------------*/ - -/* - * This isn't quite the same mechanism as CDC Ethernet, since the - * notification scheme passes less data, but the same set of link - * states must be tested. A key difference is that altsettings are - * not used to tell whether the link should send packets or not. - */ - -static void rndis_open(struct gether *geth) -{ - struct f_rndis *rndis = func_to_rndis(&geth->func); - struct usb_composite_dev *cdev = geth->func.config->cdev; - - DBG(cdev, "%s\n", __func__); - - rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, - bitrate(cdev->gadget) / 100); - rndis_signal_connect(rndis->config); -} - -static void rndis_close(struct gether *geth) -{ - struct f_rndis *rndis = func_to_rndis(&geth->func); - - DBG(geth->func.config->cdev, "%s\n", __func__); - - rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0); - rndis_signal_disconnect(rndis->config); -} - -/*-------------------------------------------------------------------------*/ - -/* ethernet function driver setup/binding */ - -static int -rndis_bind(struct usb_configuration *c, struct usb_function *f) -{ - struct usb_composite_dev *cdev = c->cdev; - struct f_rndis *rndis = func_to_rndis(f); - int status; - struct usb_ep *ep; - - /* allocate instance-specific interface IDs */ - status = usb_interface_id(c, f); - if (status < 0) - goto fail; - rndis->ctrl_id = status; - rndis_iad_descriptor.bFirstInterface = status; - - rndis_control_intf.bInterfaceNumber = status; - rndis_union_desc.bMasterInterface0 = status; - - status = usb_interface_id(c, f); - if (status < 0) - goto fail; - rndis->data_id = status; - - rndis_data_intf.bInterfaceNumber = status; - rndis_union_desc.bSlaveInterface0 = status; - - status = -ENODEV; - - /* allocate instance-specific endpoints */ - ep = usb_ep_autoconfig(cdev->gadget, &fs_in_desc); - if (!ep) - goto fail; - rndis->port.in_ep = ep; - ep->driver_data = cdev; /* claim */ - - ep = usb_ep_autoconfig(cdev->gadget, &fs_out_desc); - if (!ep) - goto fail; - rndis->port.out_ep = ep; - ep->driver_data = cdev; /* claim */ - - /* NOTE: a status/notification endpoint is, strictly speaking, - * optional. We don't treat it that way though! It's simpler, - * and some newer profiles don't treat it as optional. - */ - ep = usb_ep_autoconfig(cdev->gadget, &fs_notify_desc); - if (!ep) - goto fail; - rndis->notify = ep; - ep->driver_data = cdev; /* claim */ - - status = -ENOMEM; - - /* allocate notification request and buffer */ - rndis->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL); - if (!rndis->notify_req) - goto fail; - rndis->notify_req->buf = kmalloc(STATUS_BYTECOUNT, GFP_KERNEL); - if (!rndis->notify_req->buf) - goto fail; - rndis->notify_req->length = STATUS_BYTECOUNT; - rndis->notify_req->context = rndis; - rndis->notify_req->complete = rndis_response_complete; - - /* copy descriptors, and track endpoint copies */ - f->descriptors = usb_copy_descriptors(eth_fs_function); - if (!f->descriptors) - goto fail; - - /* support all relevant hardware speeds... we expect that when - * hardware is dual speed, all bulk-capable endpoints work at - * both speeds - */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - hs_in_desc.bEndpointAddress = - fs_in_desc.bEndpointAddress; - hs_out_desc.bEndpointAddress = - fs_out_desc.bEndpointAddress; - hs_notify_desc.bEndpointAddress = - fs_notify_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->hs_descriptors = usb_copy_descriptors(eth_hs_function); - if (!f->hs_descriptors) - goto fail; - } - - if (gadget_is_superspeed(c->cdev->gadget)) { - ss_in_desc.bEndpointAddress = - fs_in_desc.bEndpointAddress; - ss_out_desc.bEndpointAddress = - fs_out_desc.bEndpointAddress; - ss_notify_desc.bEndpointAddress = - fs_notify_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->ss_descriptors = usb_copy_descriptors(eth_ss_function); - if (!f->ss_descriptors) - goto fail; - } - - rndis->port.open = rndis_open; - rndis->port.close = rndis_close; - - status = rndis_register(rndis_response_available, rndis); - if (status < 0) - goto fail; - rndis->config = status; - - rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0); - rndis_set_host_mac(rndis->config, rndis->ethaddr); - - if (rndis->manufacturer && rndis->vendorID && - rndis_set_param_vendor(rndis->config, rndis->vendorID, - rndis->manufacturer)) - goto fail; - - /* NOTE: all that is done without knowing or caring about - * the network link ... which is unavailable to this code - * until we're activated via set_alt(). - */ - - DBG(cdev, "RNDIS: %s speed IN/%s OUT/%s NOTIFY/%s\n", - gadget_is_superspeed(c->cdev->gadget) ? "super" : - gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", - rndis->port.in_ep->name, rndis->port.out_ep->name, - rndis->notify->name); - return 0; - -fail: - if (gadget_is_superspeed(c->cdev->gadget) && f->ss_descriptors) - usb_free_descriptors(f->ss_descriptors); - if (gadget_is_dualspeed(c->cdev->gadget) && f->hs_descriptors) - usb_free_descriptors(f->hs_descriptors); - if (f->descriptors) - usb_free_descriptors(f->descriptors); - - if (rndis->notify_req) { - kfree(rndis->notify_req->buf); - usb_ep_free_request(rndis->notify, rndis->notify_req); - } - - /* we might as well release our claims on endpoints */ - if (rndis->notify) - rndis->notify->driver_data = NULL; - if (rndis->port.out_ep->desc) - rndis->port.out_ep->driver_data = NULL; - if (rndis->port.in_ep->desc) - rndis->port.in_ep->driver_data = NULL; - - ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); - - return status; -} - -static void -rndis_unbind(struct usb_configuration *c, struct usb_function *f) -{ - struct f_rndis *rndis = func_to_rndis(f); - - rndis_deregister(rndis->config); - rndis_exit(); - rndis_string_defs[0].id = 0; - - if (gadget_is_superspeed(c->cdev->gadget)) - usb_free_descriptors(f->ss_descriptors); - if (gadget_is_dualspeed(c->cdev->gadget)) - usb_free_descriptors(f->hs_descriptors); - usb_free_descriptors(f->descriptors); - - kfree(rndis->notify_req->buf); - usb_ep_free_request(rndis->notify, rndis->notify_req); - - kfree(rndis); -} - -/* Some controllers can't support RNDIS ... */ -static inline bool can_support_rndis(struct usb_configuration *c) -{ - /* everything else is *presumably* fine */ - return true; -} - -int -rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], - u32 vendorID, const char *manufacturer) -{ - struct f_rndis *rndis; - int status; - - if (!can_support_rndis(c) || !ethaddr) - return -EINVAL; - - /* maybe allocate device-global string IDs */ - if (rndis_string_defs[0].id == 0) { - - /* ... and setup RNDIS itself */ - status = rndis_init(); - if (status < 0) - return status; - - /* control interface label */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - rndis_string_defs[0].id = status; - rndis_control_intf.iInterface = status; - - /* data interface label */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - rndis_string_defs[1].id = status; - rndis_data_intf.iInterface = status; - - /* IAD iFunction label */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - rndis_string_defs[2].id = status; - rndis_iad_descriptor.iFunction = status; - } - - /* allocate and initialize one new instance */ - status = -ENOMEM; - rndis = kzalloc(sizeof *rndis, GFP_KERNEL); - if (!rndis) - goto fail; - - memcpy(rndis->ethaddr, ethaddr, ETH_ALEN); - rndis->vendorID = vendorID; - rndis->manufacturer = manufacturer; - - /* RNDIS activates when the host changes this filter */ - rndis->port.cdc_filter = 0; - - /* RNDIS has special (and complex) framing */ - rndis->port.header_len = sizeof(struct rndis_packet_msg_type); - rndis->port.wrap = rndis_add_header; - rndis->port.unwrap = rndis_rm_hdr; - - rndis->port.func.name = "rndis"; - rndis->port.func.strings = rndis_strings; - /* descriptors are per-instance copies */ - rndis->port.func.bind = rndis_bind; - rndis->port.func.unbind = rndis_unbind; - rndis->port.func.set_alt = rndis_set_alt; - rndis->port.func.setup = rndis_setup; - rndis->port.func.disable = rndis_disable; - - status = usb_add_function(c, &rndis->port.func); - if (status) { - kfree(rndis); -fail: - rndis_exit(); - } - return status; -} diff --git a/drivers/staging/ccg/gadget_chips.h b/drivers/staging/ccg/gadget_chips.h deleted file mode 100644 index 0ccca58e7a8..00000000000 --- a/drivers/staging/ccg/gadget_chips.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - * USB device controllers have lots of quirks. Use these macros in - * gadget drivers or other code that needs to deal with them, and which - * autoconfigures instead of using early binding to the hardware. - * - * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by - * some config file that gets updated as new hardware is supported. - * (And avoiding all runtime comparisons in typical one-choice configs!) - * - * NOTE: some of these controller drivers may not be available yet. - * Some are available on 2.4 kernels; several are available, but not - * yet pushed in the 2.6 mainline tree. - */ - -#ifndef __GADGET_CHIPS_H -#define __GADGET_CHIPS_H - -/* - * NOTICE: the entries below are alphabetical and should be kept - * that way. - * - * Always be sure to add new entries to the correct position or - * accept the bashing later. - * - * If you have forgotten the alphabetical order let VIM/EMACS - * do that for you. - */ -#define gadget_is_amd5536udc(g) (!strcmp("amd5536udc", (g)->name)) -#define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name)) -#define gadget_is_atmel_usba(g) (!strcmp("atmel_usba_udc", (g)->name)) -#define gadget_is_bcm63xx(g) (!strcmp("bcm63xx_udc", (g)->name)) -#define gadget_is_ci13xxx_msm(g) (!strcmp("ci13xxx_msm", (g)->name)) -#define gadget_is_ci13xxx_pci(g) (!strcmp("ci13xxx_pci", (g)->name)) -#define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name)) -#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name)) -#define gadget_is_fsl_qe(g) (!strcmp("fsl_qe_udc", (g)->name)) -#define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name)) -#define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name)) -#define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name)) -#define gadget_is_langwell(g) (!strcmp("langwell_udc", (g)->name)) -#define gadget_is_lpc32xx(g) (!strcmp("lpc32xx_udc", (g)->name)) -#define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name)) -#define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name)) -#define gadget_is_net2272(g) (!strcmp("net2272", (g)->name)) -#define gadget_is_net2280(g) (!strcmp("net2280", (g)->name)) -#define gadget_is_omap(g) (!strcmp("omap_udc", (g)->name)) -#define gadget_is_pch(g) (!strcmp("pch_udc", (g)->name)) -#define gadget_is_pxa(g) (!strcmp("pxa25x_udc", (g)->name)) -#define gadget_is_pxa27x(g) (!strcmp("pxa27x_udc", (g)->name)) -#define gadget_is_r8a66597(g) (!strcmp("r8a66597_udc", (g)->name)) -#define gadget_is_renesas_usbhs(g) (!strcmp("renesas_usbhs_udc", (g)->name)) -#define gadget_is_s3c2410(g) (!strcmp("s3c2410_udc", (g)->name)) -#define gadget_is_s3c_hsotg(g) (!strcmp("s3c-hsotg", (g)->name)) -#define gadget_is_s3c_hsudc(g) (!strcmp("s3c-hsudc", (g)->name)) - -/** - * usb_gadget_controller_number - support bcdDevice id convention - * @gadget: the controller being driven - * - * Return a 2-digit BCD value associated with the peripheral controller, - * suitable for use as part of a bcdDevice value, or a negative error code. - * - * NOTE: this convention is purely optional, and has no meaning in terms of - * any USB specification. If you want to use a different convention in your - * gadget driver firmware -- maybe a more formal revision ID -- feel free. - * - * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!) - * to change their behavior accordingly. For example it might help avoiding - * some chip bug. - */ -static inline int usb_gadget_controller_number(struct usb_gadget *gadget) -{ - if (gadget_is_net2280(gadget)) - return 0x01; - else if (gadget_is_dummy(gadget)) - return 0x02; - else if (gadget_is_pxa(gadget)) - return 0x03; - else if (gadget_is_goku(gadget)) - return 0x06; - else if (gadget_is_omap(gadget)) - return 0x08; - else if (gadget_is_pxa27x(gadget)) - return 0x11; - else if (gadget_is_s3c2410(gadget)) - return 0x12; - else if (gadget_is_at91(gadget)) - return 0x13; - else if (gadget_is_imx(gadget)) - return 0x14; - else if (gadget_is_musbhdrc(gadget)) - return 0x16; - else if (gadget_is_atmel_usba(gadget)) - return 0x18; - else if (gadget_is_fsl_usb2(gadget)) - return 0x19; - else if (gadget_is_amd5536udc(gadget)) - return 0x20; - else if (gadget_is_m66592(gadget)) - return 0x21; - else if (gadget_is_fsl_qe(gadget)) - return 0x22; - else if (gadget_is_ci13xxx_pci(gadget)) - return 0x23; - else if (gadget_is_langwell(gadget)) - return 0x24; - else if (gadget_is_r8a66597(gadget)) - return 0x25; - else if (gadget_is_s3c_hsotg(gadget)) - return 0x26; - else if (gadget_is_pch(gadget)) - return 0x27; - else if (gadget_is_ci13xxx_msm(gadget)) - return 0x28; - else if (gadget_is_renesas_usbhs(gadget)) - return 0x29; - else if (gadget_is_s3c_hsudc(gadget)) - return 0x30; - else if (gadget_is_net2272(gadget)) - return 0x31; - else if (gadget_is_dwc3(gadget)) - return 0x32; - else if (gadget_is_lpc32xx(gadget)) - return 0x33; - else if (gadget_is_bcm63xx(gadget)) - return 0x34; - - return -ENOENT; -} - - -/** - * gadget_supports_altsettings - return true if altsettings work - * @gadget: the gadget in question - */ -static inline bool gadget_supports_altsettings(struct usb_gadget *gadget) -{ - /* PXA 21x/25x/26x has no altsettings at all */ - if (gadget_is_pxa(gadget)) - return false; - - /* PXA 27x and 3xx have *broken* altsetting support */ - if (gadget_is_pxa27x(gadget)) - return false; - - /* Everything else is *presumably* fine ... */ - return true; -} - -#endif /* __GADGET_CHIPS_H */ diff --git a/drivers/staging/ccg/ndis.h b/drivers/staging/ccg/ndis.h deleted file mode 100644 index a19f72dec0c..00000000000 --- a/drivers/staging/ccg/ndis.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * ndis.h - * - * ntddndis.h modified by Benedikt Spranger - * - * Thanks to the cygwin development team, - * espacially to Casper S. Hornstrup - * - * THIS SOFTWARE IS NOT COPYRIGHTED - * - * This source code is offered for use in the public domain. You may - * use, modify or distribute it freely. - */ - -#ifndef _LINUX_NDIS_H -#define _LINUX_NDIS_H - -enum NDIS_DEVICE_POWER_STATE { - NdisDeviceStateUnspecified = 0, - NdisDeviceStateD0, - NdisDeviceStateD1, - NdisDeviceStateD2, - NdisDeviceStateD3, - NdisDeviceStateMaximum -}; - -struct NDIS_PM_WAKE_UP_CAPABILITIES { - enum NDIS_DEVICE_POWER_STATE MinMagicPacketWakeUp; - enum NDIS_DEVICE_POWER_STATE MinPatternWakeUp; - enum NDIS_DEVICE_POWER_STATE MinLinkChangeWakeUp; -}; - -struct NDIS_PNP_CAPABILITIES { - __le32 Flags; - struct NDIS_PM_WAKE_UP_CAPABILITIES WakeUpCapabilities; -}; - -struct NDIS_PM_PACKET_PATTERN { - __le32 Priority; - __le32 Reserved; - __le32 MaskSize; - __le32 PatternOffset; - __le32 PatternSize; - __le32 PatternFlags; -}; - -#endif /* _LINUX_NDIS_H */ diff --git a/drivers/staging/ccg/rndis.c b/drivers/staging/ccg/rndis.c deleted file mode 100644 index d9297eebbf7..00000000000 --- a/drivers/staging/ccg/rndis.c +++ /dev/null @@ -1,1175 +0,0 @@ -/* - * RNDIS MSG parser - * - * Authors: Benedikt Spranger, Pengutronix - * Robert Schwebel, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2, as published by the Free Software Foundation. - * - * This software was originally developed in conformance with - * Microsoft's Remote NDIS Specification License Agreement. - * - * 03/12/2004 Kai-Uwe Bloem - * Fixed message length bug in init_response - * - * 03/25/2004 Kai-Uwe Bloem - * Fixed rndis_rm_hdr length bug. - * - * Copyright (C) 2004 by David Brownell - * updates to merge with Linux 2.6, better match RNDIS spec - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - - -#undef VERBOSE_DEBUG - -#include "rndis.h" - - -/* The driver for your USB chip needs to support ep0 OUT to work with - * RNDIS, plus all three CDC Ethernet endpoints (interrupt not optional). - * - * Windows hosts need an INF file like Documentation/usb/linux.inf - * and will be happier if you provide the host_addr module parameter. - */ - -#if 0 -static int rndis_debug = 0; -module_param (rndis_debug, int, 0); -MODULE_PARM_DESC (rndis_debug, "enable debugging"); -#else -#define rndis_debug 0 -#endif - -#define RNDIS_MAX_CONFIGS 1 - - -static rndis_params rndis_per_dev_params[RNDIS_MAX_CONFIGS]; - -/* Driver Version */ -static const __le32 rndis_driver_version = cpu_to_le32(1); - -/* Function Prototypes */ -static rndis_resp_t *rndis_add_response(int configNr, u32 length); - - -/* supported OIDs */ -static const u32 oid_supported_list[] = -{ - /* the general stuff */ - RNDIS_OID_GEN_SUPPORTED_LIST, - RNDIS_OID_GEN_HARDWARE_STATUS, - RNDIS_OID_GEN_MEDIA_SUPPORTED, - RNDIS_OID_GEN_MEDIA_IN_USE, - RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE, - RNDIS_OID_GEN_LINK_SPEED, - RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE, - RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE, - RNDIS_OID_GEN_VENDOR_ID, - RNDIS_OID_GEN_VENDOR_DESCRIPTION, - RNDIS_OID_GEN_VENDOR_DRIVER_VERSION, - RNDIS_OID_GEN_CURRENT_PACKET_FILTER, - RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE, - RNDIS_OID_GEN_MEDIA_CONNECT_STATUS, - RNDIS_OID_GEN_PHYSICAL_MEDIUM, - - /* the statistical stuff */ - RNDIS_OID_GEN_XMIT_OK, - RNDIS_OID_GEN_RCV_OK, - RNDIS_OID_GEN_XMIT_ERROR, - RNDIS_OID_GEN_RCV_ERROR, - RNDIS_OID_GEN_RCV_NO_BUFFER, -#ifdef RNDIS_OPTIONAL_STATS - RNDIS_OID_GEN_DIRECTED_BYTES_XMIT, - RNDIS_OID_GEN_DIRECTED_FRAMES_XMIT, - RNDIS_OID_GEN_MULTICAST_BYTES_XMIT, - RNDIS_OID_GEN_MULTICAST_FRAMES_XMIT, - RNDIS_OID_GEN_BROADCAST_BYTES_XMIT, - RNDIS_OID_GEN_BROADCAST_FRAMES_XMIT, - RNDIS_OID_GEN_DIRECTED_BYTES_RCV, - RNDIS_OID_GEN_DIRECTED_FRAMES_RCV, - RNDIS_OID_GEN_MULTICAST_BYTES_RCV, - RNDIS_OID_GEN_MULTICAST_FRAMES_RCV, - RNDIS_OID_GEN_BROADCAST_BYTES_RCV, - RNDIS_OID_GEN_BROADCAST_FRAMES_RCV, - RNDIS_OID_GEN_RCV_CRC_ERROR, - RNDIS_OID_GEN_TRANSMIT_QUEUE_LENGTH, -#endif /* RNDIS_OPTIONAL_STATS */ - - /* mandatory 802.3 */ - /* the general stuff */ - RNDIS_OID_802_3_PERMANENT_ADDRESS, - RNDIS_OID_802_3_CURRENT_ADDRESS, - RNDIS_OID_802_3_MULTICAST_LIST, - RNDIS_OID_802_3_MAC_OPTIONS, - RNDIS_OID_802_3_MAXIMUM_LIST_SIZE, - - /* the statistical stuff */ - RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT, - RNDIS_OID_802_3_XMIT_ONE_COLLISION, - RNDIS_OID_802_3_XMIT_MORE_COLLISIONS, -#ifdef RNDIS_OPTIONAL_STATS - RNDIS_OID_802_3_XMIT_DEFERRED, - RNDIS_OID_802_3_XMIT_MAX_COLLISIONS, - RNDIS_OID_802_3_RCV_OVERRUN, - RNDIS_OID_802_3_XMIT_UNDERRUN, - RNDIS_OID_802_3_XMIT_HEARTBEAT_FAILURE, - RNDIS_OID_802_3_XMIT_TIMES_CRS_LOST, - RNDIS_OID_802_3_XMIT_LATE_COLLISIONS, -#endif /* RNDIS_OPTIONAL_STATS */ - -#ifdef RNDIS_PM - /* PM and wakeup are "mandatory" for USB, but the RNDIS specs - * don't say what they mean ... and the NDIS specs are often - * confusing and/or ambiguous in this context. (That is, more - * so than their specs for the other OIDs.) - * - * FIXME someone who knows what these should do, please - * implement them! - */ - - /* power management */ - OID_PNP_CAPABILITIES, - OID_PNP_QUERY_POWER, - OID_PNP_SET_POWER, - -#ifdef RNDIS_WAKEUP - /* wake up host */ - OID_PNP_ENABLE_WAKE_UP, - OID_PNP_ADD_WAKE_UP_PATTERN, - OID_PNP_REMOVE_WAKE_UP_PATTERN, -#endif /* RNDIS_WAKEUP */ -#endif /* RNDIS_PM */ -}; - - -/* NDIS Functions */ -static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, - unsigned buf_len, rndis_resp_t *r) -{ - int retval = -ENOTSUPP; - u32 length = 4; /* usually */ - __le32 *outbuf; - int i, count; - rndis_query_cmplt_type *resp; - struct net_device *net; - struct rtnl_link_stats64 temp; - const struct rtnl_link_stats64 *stats; - - if (!r) return -ENOMEM; - resp = (rndis_query_cmplt_type *)r->buf; - - if (!resp) return -ENOMEM; - - if (buf_len && rndis_debug > 1) { - pr_debug("query OID %08x value, len %d:\n", OID, buf_len); - for (i = 0; i < buf_len; i += 16) { - pr_debug("%03d: %08x %08x %08x %08x\n", i, - get_unaligned_le32(&buf[i]), - get_unaligned_le32(&buf[i + 4]), - get_unaligned_le32(&buf[i + 8]), - get_unaligned_le32(&buf[i + 12])); - } - } - - /* response goes here, right after the header */ - outbuf = (__le32 *)&resp[1]; - resp->InformationBufferOffset = cpu_to_le32(16); - - net = rndis_per_dev_params[configNr].dev; - stats = dev_get_stats(net, &temp); - - switch (OID) { - - /* general oids (table 4-1) */ - - /* mandatory */ - case RNDIS_OID_GEN_SUPPORTED_LIST: - pr_debug("%s: RNDIS_OID_GEN_SUPPORTED_LIST\n", __func__); - length = sizeof(oid_supported_list); - count = length / sizeof(u32); - for (i = 0; i < count; i++) - outbuf[i] = cpu_to_le32(oid_supported_list[i]); - retval = 0; - break; - - /* mandatory */ - case RNDIS_OID_GEN_HARDWARE_STATUS: - pr_debug("%s: RNDIS_OID_GEN_HARDWARE_STATUS\n", __func__); - /* Bogus question! - * Hardware must be ready to receive high level protocols. - * BTW: - * reddite ergo quae sunt Caesaris Caesari - * et quae sunt Dei Deo! - */ - *outbuf = cpu_to_le32(0); - retval = 0; - break; - - /* mandatory */ - case RNDIS_OID_GEN_MEDIA_SUPPORTED: - pr_debug("%s: RNDIS_OID_GEN_MEDIA_SUPPORTED\n", __func__); - *outbuf = cpu_to_le32(rndis_per_dev_params[configNr].medium); - retval = 0; - break; - - /* mandatory */ - case RNDIS_OID_GEN_MEDIA_IN_USE: - pr_debug("%s: RNDIS_OID_GEN_MEDIA_IN_USE\n", __func__); - /* one medium, one transport... (maybe you do it better) */ - *outbuf = cpu_to_le32(rndis_per_dev_params[configNr].medium); - retval = 0; - break; - - /* mandatory */ - case RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE: - pr_debug("%s: RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE\n", __func__); - if (rndis_per_dev_params[configNr].dev) { - *outbuf = cpu_to_le32( - rndis_per_dev_params[configNr].dev->mtu); - retval = 0; - } - break; - - /* mandatory */ - case RNDIS_OID_GEN_LINK_SPEED: - if (rndis_debug > 1) - pr_debug("%s: RNDIS_OID_GEN_LINK_SPEED\n", __func__); - if (rndis_per_dev_params[configNr].media_state - == RNDIS_MEDIA_STATE_DISCONNECTED) - *outbuf = cpu_to_le32(0); - else - *outbuf = cpu_to_le32( - rndis_per_dev_params[configNr].speed); - retval = 0; - break; - - /* mandatory */ - case RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE: - pr_debug("%s: RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE\n", __func__); - if (rndis_per_dev_params[configNr].dev) { - *outbuf = cpu_to_le32( - rndis_per_dev_params[configNr].dev->mtu); - retval = 0; - } - break; - - /* mandatory */ - case RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE: - pr_debug("%s: RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE\n", __func__); - if (rndis_per_dev_params[configNr].dev) { - *outbuf = cpu_to_le32( - rndis_per_dev_params[configNr].dev->mtu); - retval = 0; - } - break; - - /* mandatory */ - case RNDIS_OID_GEN_VENDOR_ID: - pr_debug("%s: RNDIS_OID_GEN_VENDOR_ID\n", __func__); - *outbuf = cpu_to_le32( - rndis_per_dev_params[configNr].vendorID); - retval = 0; - break; - - /* mandatory */ - case RNDIS_OID_GEN_VENDOR_DESCRIPTION: - pr_debug("%s: RNDIS_OID_GEN_VENDOR_DESCRIPTION\n", __func__); - if (rndis_per_dev_params[configNr].vendorDescr) { - length = strlen(rndis_per_dev_params[configNr]. - vendorDescr); - memcpy(outbuf, - rndis_per_dev_params[configNr].vendorDescr, - length); - } else { - outbuf[0] = 0; - } - retval = 0; - break; - - case RNDIS_OID_GEN_VENDOR_DRIVER_VERSION: - pr_debug("%s: RNDIS_OID_GEN_VENDOR_DRIVER_VERSION\n", __func__); - /* Created as LE */ - *outbuf = rndis_driver_version; - retval = 0; - break; - - /* mandatory */ - case RNDIS_OID_GEN_CURRENT_PACKET_FILTER: - pr_debug("%s: RNDIS_OID_GEN_CURRENT_PACKET_FILTER\n", __func__); - *outbuf = cpu_to_le32(*rndis_per_dev_params[configNr].filter); - retval = 0; - break; - - /* mandatory */ - case RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE: - pr_debug("%s: RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE\n", __func__); - *outbuf = cpu_to_le32(RNDIS_MAX_TOTAL_SIZE); - retval = 0; - break; - - /* mandatory */ - case RNDIS_OID_GEN_MEDIA_CONNECT_STATUS: - if (rndis_debug > 1) - pr_debug("%s: RNDIS_OID_GEN_MEDIA_CONNECT_STATUS\n", __func__); - *outbuf = cpu_to_le32(rndis_per_dev_params[configNr] - .media_state); - retval = 0; - break; - - case RNDIS_OID_GEN_PHYSICAL_MEDIUM: - pr_debug("%s: RNDIS_OID_GEN_PHYSICAL_MEDIUM\n", __func__); - *outbuf = cpu_to_le32(0); - retval = 0; - break; - - /* The RNDIS specification is incomplete/wrong. Some versions - * of MS-Windows expect OIDs that aren't specified there. Other - * versions emit undefined RNDIS messages. DOCUMENT ALL THESE! - */ - case RNDIS_OID_GEN_MAC_OPTIONS: /* from WinME */ - pr_debug("%s: RNDIS_OID_GEN_MAC_OPTIONS\n", __func__); - *outbuf = cpu_to_le32( - RNDIS_MAC_OPTION_RECEIVE_SERIALIZED - | RNDIS_MAC_OPTION_FULL_DUPLEX); - retval = 0; - break; - - /* statistics OIDs (table 4-2) */ - - /* mandatory */ - case RNDIS_OID_GEN_XMIT_OK: - if (rndis_debug > 1) - pr_debug("%s: RNDIS_OID_GEN_XMIT_OK\n", __func__); - if (stats) { - *outbuf = cpu_to_le32(stats->tx_packets - - stats->tx_errors - stats->tx_dropped); - retval = 0; - } - break; - - /* mandatory */ - case RNDIS_OID_GEN_RCV_OK: - if (rndis_debug > 1) - pr_debug("%s: RNDIS_OID_GEN_RCV_OK\n", __func__); - if (stats) { - *outbuf = cpu_to_le32(stats->rx_packets - - stats->rx_errors - stats->rx_dropped); - retval = 0; - } - break; - - /* mandatory */ - case RNDIS_OID_GEN_XMIT_ERROR: - if (rndis_debug > 1) - pr_debug("%s: RNDIS_OID_GEN_XMIT_ERROR\n", __func__); - if (stats) { - *outbuf = cpu_to_le32(stats->tx_errors); - retval = 0; - } - break; - - /* mandatory */ - case RNDIS_OID_GEN_RCV_ERROR: - if (rndis_debug > 1) - pr_debug("%s: RNDIS_OID_GEN_RCV_ERROR\n", __func__); - if (stats) { - *outbuf = cpu_to_le32(stats->rx_errors); - retval = 0; - } - break; - - /* mandatory */ - case RNDIS_OID_GEN_RCV_NO_BUFFER: - pr_debug("%s: RNDIS_OID_GEN_RCV_NO_BUFFER\n", __func__); - if (stats) { - *outbuf = cpu_to_le32(stats->rx_dropped); - retval = 0; - } - break; - - /* ieee802.3 OIDs (table 4-3) */ - - /* mandatory */ - case RNDIS_OID_802_3_PERMANENT_ADDRESS: - pr_debug("%s: RNDIS_OID_802_3_PERMANENT_ADDRESS\n", __func__); - if (rndis_per_dev_params[configNr].dev) { - length = ETH_ALEN; - memcpy(outbuf, - rndis_per_dev_params[configNr].host_mac, - length); - retval = 0; - } - break; - - /* mandatory */ - case RNDIS_OID_802_3_CURRENT_ADDRESS: - pr_debug("%s: RNDIS_OID_802_3_CURRENT_ADDRESS\n", __func__); - if (rndis_per_dev_params[configNr].dev) { - length = ETH_ALEN; - memcpy(outbuf, - rndis_per_dev_params [configNr].host_mac, - length); - retval = 0; - } - break; - - /* mandatory */ - case RNDIS_OID_802_3_MULTICAST_LIST: - pr_debug("%s: RNDIS_OID_802_3_MULTICAST_LIST\n", __func__); - /* Multicast base address only */ - *outbuf = cpu_to_le32(0xE0000000); - retval = 0; - break; - - /* mandatory */ - case RNDIS_OID_802_3_MAXIMUM_LIST_SIZE: - pr_debug("%s: RNDIS_OID_802_3_MAXIMUM_LIST_SIZE\n", __func__); - /* Multicast base address only */ - *outbuf = cpu_to_le32(1); - retval = 0; - break; - - case RNDIS_OID_802_3_MAC_OPTIONS: - pr_debug("%s: RNDIS_OID_802_3_MAC_OPTIONS\n", __func__); - *outbuf = cpu_to_le32(0); - retval = 0; - break; - - /* ieee802.3 statistics OIDs (table 4-4) */ - - /* mandatory */ - case RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT: - pr_debug("%s: RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT\n", __func__); - if (stats) { - *outbuf = cpu_to_le32(stats->rx_frame_errors); - retval = 0; - } - break; - - /* mandatory */ - case RNDIS_OID_802_3_XMIT_ONE_COLLISION: - pr_debug("%s: RNDIS_OID_802_3_XMIT_ONE_COLLISION\n", __func__); - *outbuf = cpu_to_le32(0); - retval = 0; - break; - - /* mandatory */ - case RNDIS_OID_802_3_XMIT_MORE_COLLISIONS: - pr_debug("%s: RNDIS_OID_802_3_XMIT_MORE_COLLISIONS\n", __func__); - *outbuf = cpu_to_le32(0); - retval = 0; - break; - - default: - pr_warning("%s: query unknown OID 0x%08X\n", - __func__, OID); - } - if (retval < 0) - length = 0; - - resp->InformationBufferLength = cpu_to_le32(length); - r->length = length + sizeof(*resp); - resp->MessageLength = cpu_to_le32(r->length); - return retval; -} - -static int gen_ndis_set_resp(u8 configNr, u32 OID, u8 *buf, u32 buf_len, - rndis_resp_t *r) -{ - rndis_set_cmplt_type *resp; - int i, retval = -ENOTSUPP; - struct rndis_params *params; - - if (!r) - return -ENOMEM; - resp = (rndis_set_cmplt_type *)r->buf; - if (!resp) - return -ENOMEM; - - if (buf_len && rndis_debug > 1) { - pr_debug("set OID %08x value, len %d:\n", OID, buf_len); - for (i = 0; i < buf_len; i += 16) { - pr_debug("%03d: %08x %08x %08x %08x\n", i, - get_unaligned_le32(&buf[i]), - get_unaligned_le32(&buf[i + 4]), - get_unaligned_le32(&buf[i + 8]), - get_unaligned_le32(&buf[i + 12])); - } - } - - params = &rndis_per_dev_params[configNr]; - switch (OID) { - case RNDIS_OID_GEN_CURRENT_PACKET_FILTER: - - /* these NDIS_PACKET_TYPE_* bitflags are shared with - * cdc_filter; it's not RNDIS-specific - * NDIS_PACKET_TYPE_x == USB_CDC_PACKET_TYPE_x for x in: - * PROMISCUOUS, DIRECTED, - * MULTICAST, ALL_MULTICAST, BROADCAST - */ - *params->filter = (u16)get_unaligned_le32(buf); - pr_debug("%s: RNDIS_OID_GEN_CURRENT_PACKET_FILTER %08x\n", - __func__, *params->filter); - - /* this call has a significant side effect: it's - * what makes the packet flow start and stop, like - * activating the CDC Ethernet altsetting. - */ - retval = 0; - if (*params->filter) { - params->state = RNDIS_DATA_INITIALIZED; - netif_carrier_on(params->dev); - if (netif_running(params->dev)) - netif_wake_queue(params->dev); - } else { - params->state = RNDIS_INITIALIZED; - netif_carrier_off(params->dev); - netif_stop_queue(params->dev); - } - break; - - case RNDIS_OID_802_3_MULTICAST_LIST: - /* I think we can ignore this */ - pr_debug("%s: RNDIS_OID_802_3_MULTICAST_LIST\n", __func__); - retval = 0; - break; - - default: - pr_warning("%s: set unknown OID 0x%08X, size %d\n", - __func__, OID, buf_len); - } - - return retval; -} - -/* - * Response Functions - */ - -static int rndis_init_response(int configNr, rndis_init_msg_type *buf) -{ - rndis_init_cmplt_type *resp; - rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; - - if (!params->dev) - return -ENOTSUPP; - - r = rndis_add_response(configNr, sizeof(rndis_init_cmplt_type)); - if (!r) - return -ENOMEM; - resp = (rndis_init_cmplt_type *)r->buf; - - resp->MessageType = cpu_to_le32(RNDIS_MSG_INIT_C); - resp->MessageLength = cpu_to_le32(52); - resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ - resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); - resp->MajorVersion = cpu_to_le32(RNDIS_MAJOR_VERSION); - resp->MinorVersion = cpu_to_le32(RNDIS_MINOR_VERSION); - resp->DeviceFlags = cpu_to_le32(RNDIS_DF_CONNECTIONLESS); - resp->Medium = cpu_to_le32(RNDIS_MEDIUM_802_3); - resp->MaxPacketsPerTransfer = cpu_to_le32(1); - resp->MaxTransferSize = cpu_to_le32( - params->dev->mtu - + sizeof(struct ethhdr) - + sizeof(struct rndis_packet_msg_type) - + 22); - resp->PacketAlignmentFactor = cpu_to_le32(0); - resp->AFListOffset = cpu_to_le32(0); - resp->AFListSize = cpu_to_le32(0); - - params->resp_avail(params->v); - return 0; -} - -static int rndis_query_response(int configNr, rndis_query_msg_type *buf) -{ - rndis_query_cmplt_type *resp; - rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; - - /* pr_debug("%s: OID = %08X\n", __func__, cpu_to_le32(buf->OID)); */ - if (!params->dev) - return -ENOTSUPP; - - /* - * we need more memory: - * gen_ndis_query_resp expects enough space for - * rndis_query_cmplt_type followed by data. - * oid_supported_list is the largest data reply - */ - r = rndis_add_response(configNr, - sizeof(oid_supported_list) + sizeof(rndis_query_cmplt_type)); - if (!r) - return -ENOMEM; - resp = (rndis_query_cmplt_type *)r->buf; - - resp->MessageType = cpu_to_le32(RNDIS_MSG_QUERY_C); - resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ - - if (gen_ndis_query_resp(configNr, le32_to_cpu(buf->OID), - le32_to_cpu(buf->InformationBufferOffset) - + 8 + (u8 *)buf, - le32_to_cpu(buf->InformationBufferLength), - r)) { - /* OID not supported */ - resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED); - resp->MessageLength = cpu_to_le32(sizeof *resp); - resp->InformationBufferLength = cpu_to_le32(0); - resp->InformationBufferOffset = cpu_to_le32(0); - } else - resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); - - params->resp_avail(params->v); - return 0; -} - -static int rndis_set_response(int configNr, rndis_set_msg_type *buf) -{ - u32 BufLength, BufOffset; - rndis_set_cmplt_type *resp; - rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; - - r = rndis_add_response(configNr, sizeof(rndis_set_cmplt_type)); - if (!r) - return -ENOMEM; - resp = (rndis_set_cmplt_type *)r->buf; - - BufLength = le32_to_cpu(buf->InformationBufferLength); - BufOffset = le32_to_cpu(buf->InformationBufferOffset); - -#ifdef VERBOSE_DEBUG - pr_debug("%s: Length: %d\n", __func__, BufLength); - pr_debug("%s: Offset: %d\n", __func__, BufOffset); - pr_debug("%s: InfoBuffer: ", __func__); - - for (i = 0; i < BufLength; i++) { - pr_debug("%02x ", *(((u8 *) buf) + i + 8 + BufOffset)); - } - - pr_debug("\n"); -#endif - - resp->MessageType = cpu_to_le32(RNDIS_MSG_SET_C); - resp->MessageLength = cpu_to_le32(16); - resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ - if (gen_ndis_set_resp(configNr, le32_to_cpu(buf->OID), - ((u8 *)buf) + 8 + BufOffset, BufLength, r)) - resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED); - else - resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); - - params->resp_avail(params->v); - return 0; -} - -static int rndis_reset_response(int configNr, rndis_reset_msg_type *buf) -{ - rndis_reset_cmplt_type *resp; - rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; - - r = rndis_add_response(configNr, sizeof(rndis_reset_cmplt_type)); - if (!r) - return -ENOMEM; - resp = (rndis_reset_cmplt_type *)r->buf; - - resp->MessageType = cpu_to_le32(RNDIS_MSG_RESET_C); - resp->MessageLength = cpu_to_le32(16); - resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); - /* resent information */ - resp->AddressingReset = cpu_to_le32(1); - - params->resp_avail(params->v); - return 0; -} - -static int rndis_keepalive_response(int configNr, - rndis_keepalive_msg_type *buf) -{ - rndis_keepalive_cmplt_type *resp; - rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; - - /* host "should" check only in RNDIS_DATA_INITIALIZED state */ - - r = rndis_add_response(configNr, sizeof(rndis_keepalive_cmplt_type)); - if (!r) - return -ENOMEM; - resp = (rndis_keepalive_cmplt_type *)r->buf; - - resp->MessageType = cpu_to_le32(RNDIS_MSG_KEEPALIVE_C); - resp->MessageLength = cpu_to_le32(16); - resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ - resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); - - params->resp_avail(params->v); - return 0; -} - - -/* - * Device to Host Comunication - */ -static int rndis_indicate_status_msg(int configNr, u32 status) -{ - rndis_indicate_status_msg_type *resp; - rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; - - if (params->state == RNDIS_UNINITIALIZED) - return -ENOTSUPP; - - r = rndis_add_response(configNr, - sizeof(rndis_indicate_status_msg_type)); - if (!r) - return -ENOMEM; - resp = (rndis_indicate_status_msg_type *)r->buf; - - resp->MessageType = cpu_to_le32(RNDIS_MSG_INDICATE); - resp->MessageLength = cpu_to_le32(20); - resp->Status = cpu_to_le32(status); - resp->StatusBufferLength = cpu_to_le32(0); - resp->StatusBufferOffset = cpu_to_le32(0); - - params->resp_avail(params->v); - return 0; -} - -int rndis_signal_connect(int configNr) -{ - rndis_per_dev_params[configNr].media_state - = RNDIS_MEDIA_STATE_CONNECTED; - return rndis_indicate_status_msg(configNr, - RNDIS_STATUS_MEDIA_CONNECT); -} - -int rndis_signal_disconnect(int configNr) -{ - rndis_per_dev_params[configNr].media_state - = RNDIS_MEDIA_STATE_DISCONNECTED; - return rndis_indicate_status_msg(configNr, - RNDIS_STATUS_MEDIA_DISCONNECT); -} - -void rndis_uninit(int configNr) -{ - u8 *buf; - u32 length; - - if (configNr >= RNDIS_MAX_CONFIGS) - return; - rndis_per_dev_params[configNr].state = RNDIS_UNINITIALIZED; - - /* drain the response queue */ - while ((buf = rndis_get_next_response(configNr, &length))) - rndis_free_response(configNr, buf); -} - -void rndis_set_host_mac(int configNr, const u8 *addr) -{ - rndis_per_dev_params[configNr].host_mac = addr; -} - -/* - * Message Parser - */ -int rndis_msg_parser(u8 configNr, u8 *buf) -{ - u32 MsgType, MsgLength; - __le32 *tmp; - struct rndis_params *params; - - if (!buf) - return -ENOMEM; - - tmp = (__le32 *)buf; - MsgType = get_unaligned_le32(tmp++); - MsgLength = get_unaligned_le32(tmp++); - - if (configNr >= RNDIS_MAX_CONFIGS) - return -ENOTSUPP; - params = &rndis_per_dev_params[configNr]; - - /* NOTE: RNDIS is *EXTREMELY* chatty ... Windows constantly polls for - * rx/tx statistics and link status, in addition to KEEPALIVE traffic - * and normal HC level polling to see if there's any IN traffic. - */ - - /* For USB: responses may take up to 10 seconds */ - switch (MsgType) { - case RNDIS_MSG_INIT: - pr_debug("%s: RNDIS_MSG_INIT\n", - __func__); - params->state = RNDIS_INITIALIZED; - return rndis_init_response(configNr, - (rndis_init_msg_type *)buf); - - case RNDIS_MSG_HALT: - pr_debug("%s: RNDIS_MSG_HALT\n", - __func__); - params->state = RNDIS_UNINITIALIZED; - if (params->dev) { - netif_carrier_off(params->dev); - netif_stop_queue(params->dev); - } - return 0; - - case RNDIS_MSG_QUERY: - return rndis_query_response(configNr, - (rndis_query_msg_type *)buf); - - case RNDIS_MSG_SET: - return rndis_set_response(configNr, - (rndis_set_msg_type *)buf); - - case RNDIS_MSG_RESET: - pr_debug("%s: RNDIS_MSG_RESET\n", - __func__); - return rndis_reset_response(configNr, - (rndis_reset_msg_type *)buf); - - case RNDIS_MSG_KEEPALIVE: - /* For USB: host does this every 5 seconds */ - if (rndis_debug > 1) - pr_debug("%s: RNDIS_MSG_KEEPALIVE\n", - __func__); - return rndis_keepalive_response(configNr, - (rndis_keepalive_msg_type *) - buf); - - default: - /* At least Windows XP emits some undefined RNDIS messages. - * In one case those messages seemed to relate to the host - * suspending itself. - */ - pr_warning("%s: unknown RNDIS message 0x%08X len %d\n", - __func__, MsgType, MsgLength); - print_hex_dump_bytes(__func__, DUMP_PREFIX_OFFSET, - buf, MsgLength); - break; - } - - return -ENOTSUPP; -} - -int rndis_register(void (*resp_avail)(void *v), void *v) -{ - u8 i; - - if (!resp_avail) - return -EINVAL; - - for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { - if (!rndis_per_dev_params[i].used) { - rndis_per_dev_params[i].used = 1; - rndis_per_dev_params[i].resp_avail = resp_avail; - rndis_per_dev_params[i].v = v; - pr_debug("%s: configNr = %d\n", __func__, i); - return i; - } - } - pr_debug("failed\n"); - - return -ENODEV; -} - -void rndis_deregister(int configNr) -{ - pr_debug("%s:\n", __func__); - - if (configNr >= RNDIS_MAX_CONFIGS) return; - rndis_per_dev_params[configNr].used = 0; -} - -int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter) -{ - pr_debug("%s:\n", __func__); - if (!dev) - return -EINVAL; - if (configNr >= RNDIS_MAX_CONFIGS) return -1; - - rndis_per_dev_params[configNr].dev = dev; - rndis_per_dev_params[configNr].filter = cdc_filter; - - return 0; -} - -int rndis_set_param_vendor(u8 configNr, u32 vendorID, const char *vendorDescr) -{ - pr_debug("%s:\n", __func__); - if (!vendorDescr) return -1; - if (configNr >= RNDIS_MAX_CONFIGS) return -1; - - rndis_per_dev_params[configNr].vendorID = vendorID; - rndis_per_dev_params[configNr].vendorDescr = vendorDescr; - - return 0; -} - -int rndis_set_param_medium(u8 configNr, u32 medium, u32 speed) -{ - pr_debug("%s: %u %u\n", __func__, medium, speed); - if (configNr >= RNDIS_MAX_CONFIGS) return -1; - - rndis_per_dev_params[configNr].medium = medium; - rndis_per_dev_params[configNr].speed = speed; - - return 0; -} - -void rndis_add_hdr(struct sk_buff *skb) -{ - struct rndis_packet_msg_type *header; - - if (!skb) - return; - header = (void *)skb_push(skb, sizeof(*header)); - memset(header, 0, sizeof *header); - header->MessageType = cpu_to_le32(RNDIS_MSG_PACKET); - header->MessageLength = cpu_to_le32(skb->len); - header->DataOffset = cpu_to_le32(36); - header->DataLength = cpu_to_le32(skb->len - sizeof(*header)); -} - -void rndis_free_response(int configNr, u8 *buf) -{ - rndis_resp_t *r; - struct list_head *act, *tmp; - - list_for_each_safe(act, tmp, - &(rndis_per_dev_params[configNr].resp_queue)) - { - r = list_entry(act, rndis_resp_t, list); - if (r && r->buf == buf) { - list_del(&r->list); - kfree(r); - } - } -} - -u8 *rndis_get_next_response(int configNr, u32 *length) -{ - rndis_resp_t *r; - struct list_head *act, *tmp; - - if (!length) return NULL; - - list_for_each_safe(act, tmp, - &(rndis_per_dev_params[configNr].resp_queue)) - { - r = list_entry(act, rndis_resp_t, list); - if (!r->send) { - r->send = 1; - *length = r->length; - return r->buf; - } - } - - return NULL; -} - -static rndis_resp_t *rndis_add_response(int configNr, u32 length) -{ - rndis_resp_t *r; - - /* NOTE: this gets copied into ether.c USB_BUFSIZ bytes ... */ - r = kmalloc(sizeof(rndis_resp_t) + length, GFP_ATOMIC); - if (!r) return NULL; - - r->buf = (u8 *)(r + 1); - r->length = length; - r->send = 0; - - list_add_tail(&r->list, - &(rndis_per_dev_params[configNr].resp_queue)); - return r; -} - -int rndis_rm_hdr(struct gether *port, - struct sk_buff *skb, - struct sk_buff_head *list) -{ - /* tmp points to a struct rndis_packet_msg_type */ - __le32 *tmp = (void *)skb->data; - - /* MessageType, MessageLength */ - if (cpu_to_le32(RNDIS_MSG_PACKET) - != get_unaligned(tmp++)) { - dev_kfree_skb_any(skb); - return -EINVAL; - } - tmp++; - - /* DataOffset, DataLength */ - if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8)) { - dev_kfree_skb_any(skb); - return -EOVERFLOW; - } - skb_trim(skb, get_unaligned_le32(tmp++)); - - skb_queue_tail(list, skb); - return 0; -} - -#ifdef CONFIG_USB_GADGET_DEBUG_FILES - -static int rndis_proc_show(struct seq_file *m, void *v) -{ - rndis_params *param = m->private; - - seq_printf(m, - "Config Nr. %d\n" - "used : %s\n" - "state : %s\n" - "medium : 0x%08X\n" - "speed : %d\n" - "cable : %s\n" - "vendor ID : 0x%08X\n" - "vendor : %s\n", - param->confignr, (param->used) ? "y" : "n", - ({ char *s = "?"; - switch (param->state) { - case RNDIS_UNINITIALIZED: - s = "RNDIS_UNINITIALIZED"; break; - case RNDIS_INITIALIZED: - s = "RNDIS_INITIALIZED"; break; - case RNDIS_DATA_INITIALIZED: - s = "RNDIS_DATA_INITIALIZED"; break; - }; s; }), - param->medium, - (param->media_state) ? 0 : param->speed*100, - (param->media_state) ? "disconnected" : "connected", - param->vendorID, param->vendorDescr); - return 0; -} - -static ssize_t rndis_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *ppos) -{ - rndis_params *p = PDE(file_inode(file))->data; - u32 speed = 0; - int i, fl_speed = 0; - - for (i = 0; i < count; i++) { - char c; - if (get_user(c, buffer)) - return -EFAULT; - switch (c) { - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - case '8': - case '9': - fl_speed = 1; - speed = speed * 10 + c - '0'; - break; - case 'C': - case 'c': - rndis_signal_connect(p->confignr); - break; - case 'D': - case 'd': - rndis_signal_disconnect(p->confignr); - break; - default: - if (fl_speed) p->speed = speed; - else pr_debug("%c is not valid\n", c); - break; - } - - buffer++; - } - - return count; -} - -static int rndis_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, rndis_proc_show, PDE(inode)->data); -} - -static const struct file_operations rndis_proc_fops = { - .owner = THIS_MODULE, - .open = rndis_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = rndis_proc_write, -}; - -#define NAME_TEMPLATE "driver/rndis-%03d" - -static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS]; - -#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ - - -int rndis_init(void) -{ - u8 i; - - for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { -#ifdef CONFIG_USB_GADGET_DEBUG_FILES - char name [20]; - - sprintf(name, NAME_TEMPLATE, i); - rndis_connect_state[i] = proc_create_data(name, 0660, NULL, - &rndis_proc_fops, - (void *)(rndis_per_dev_params + i)); - if (!rndis_connect_state[i]) { - pr_debug("%s: remove entries", __func__); - while (i) { - sprintf(name, NAME_TEMPLATE, --i); - remove_proc_entry(name, NULL); - } - pr_debug("\n"); - return -EIO; - } -#endif - rndis_per_dev_params[i].confignr = i; - rndis_per_dev_params[i].used = 0; - rndis_per_dev_params[i].state = RNDIS_UNINITIALIZED; - rndis_per_dev_params[i].media_state - = RNDIS_MEDIA_STATE_DISCONNECTED; - INIT_LIST_HEAD(&(rndis_per_dev_params[i].resp_queue)); - } - - return 0; -} - -void rndis_exit(void) -{ -#ifdef CONFIG_USB_GADGET_DEBUG_FILES - u8 i; - char name[20]; - - for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { - sprintf(name, NAME_TEMPLATE, i); - remove_proc_entry(name, NULL); - } -#endif -} diff --git a/drivers/staging/ccg/rndis.h b/drivers/staging/ccg/rndis.h deleted file mode 100644 index 0647f2f34e8..00000000000 --- a/drivers/staging/ccg/rndis.h +++ /dev/null @@ -1,222 +0,0 @@ -/* - * RNDIS Definitions for Remote NDIS - * - * Authors: Benedikt Spranger, Pengutronix - * Robert Schwebel, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2, as published by the Free Software Foundation. - * - * This software was originally developed in conformance with - * Microsoft's Remote NDIS Specification License Agreement. - */ - -#ifndef _LINUX_RNDIS_H -#define _LINUX_RNDIS_H - -#include -#include "ndis.h" - -#define RNDIS_MAXIMUM_FRAME_SIZE 1518 -#define RNDIS_MAX_TOTAL_SIZE 1558 - -typedef struct rndis_init_msg_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 RequestID; - __le32 MajorVersion; - __le32 MinorVersion; - __le32 MaxTransferSize; -} rndis_init_msg_type; - -typedef struct rndis_init_cmplt_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 RequestID; - __le32 Status; - __le32 MajorVersion; - __le32 MinorVersion; - __le32 DeviceFlags; - __le32 Medium; - __le32 MaxPacketsPerTransfer; - __le32 MaxTransferSize; - __le32 PacketAlignmentFactor; - __le32 AFListOffset; - __le32 AFListSize; -} rndis_init_cmplt_type; - -typedef struct rndis_halt_msg_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 RequestID; -} rndis_halt_msg_type; - -typedef struct rndis_query_msg_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 RequestID; - __le32 OID; - __le32 InformationBufferLength; - __le32 InformationBufferOffset; - __le32 DeviceVcHandle; -} rndis_query_msg_type; - -typedef struct rndis_query_cmplt_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 RequestID; - __le32 Status; - __le32 InformationBufferLength; - __le32 InformationBufferOffset; -} rndis_query_cmplt_type; - -typedef struct rndis_set_msg_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 RequestID; - __le32 OID; - __le32 InformationBufferLength; - __le32 InformationBufferOffset; - __le32 DeviceVcHandle; -} rndis_set_msg_type; - -typedef struct rndis_set_cmplt_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 RequestID; - __le32 Status; -} rndis_set_cmplt_type; - -typedef struct rndis_reset_msg_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 Reserved; -} rndis_reset_msg_type; - -typedef struct rndis_reset_cmplt_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 Status; - __le32 AddressingReset; -} rndis_reset_cmplt_type; - -typedef struct rndis_indicate_status_msg_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 Status; - __le32 StatusBufferLength; - __le32 StatusBufferOffset; -} rndis_indicate_status_msg_type; - -typedef struct rndis_keepalive_msg_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 RequestID; -} rndis_keepalive_msg_type; - -typedef struct rndis_keepalive_cmplt_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 RequestID; - __le32 Status; -} rndis_keepalive_cmplt_type; - -struct rndis_packet_msg_type -{ - __le32 MessageType; - __le32 MessageLength; - __le32 DataOffset; - __le32 DataLength; - __le32 OOBDataOffset; - __le32 OOBDataLength; - __le32 NumOOBDataElements; - __le32 PerPacketInfoOffset; - __le32 PerPacketInfoLength; - __le32 VcHandle; - __le32 Reserved; -} __attribute__ ((packed)); - -struct rndis_config_parameter -{ - __le32 ParameterNameOffset; - __le32 ParameterNameLength; - __le32 ParameterType; - __le32 ParameterValueOffset; - __le32 ParameterValueLength; -}; - -/* implementation specific */ -enum rndis_state -{ - RNDIS_UNINITIALIZED, - RNDIS_INITIALIZED, - RNDIS_DATA_INITIALIZED, -}; - -typedef struct rndis_resp_t -{ - struct list_head list; - u8 *buf; - u32 length; - int send; -} rndis_resp_t; - -typedef struct rndis_params -{ - u8 confignr; - u8 used; - u16 saved_filter; - enum rndis_state state; - u32 medium; - u32 speed; - u32 media_state; - - const u8 *host_mac; - u16 *filter; - struct net_device *dev; - - u32 vendorID; - const char *vendorDescr; - void (*resp_avail)(void *v); - void *v; - struct list_head resp_queue; -} rndis_params; - -/* RNDIS Message parser and other useless functions */ -int rndis_msg_parser (u8 configNr, u8 *buf); -int rndis_register(void (*resp_avail)(void *v), void *v); -void rndis_deregister (int configNr); -int rndis_set_param_dev (u8 configNr, struct net_device *dev, - u16 *cdc_filter); -int rndis_set_param_vendor (u8 configNr, u32 vendorID, - const char *vendorDescr); -int rndis_set_param_medium (u8 configNr, u32 medium, u32 speed); -void rndis_add_hdr (struct sk_buff *skb); -int rndis_rm_hdr(struct gether *port, struct sk_buff *skb, - struct sk_buff_head *list); -u8 *rndis_get_next_response (int configNr, u32 *length); -void rndis_free_response (int configNr, u8 *buf); - -void rndis_uninit (int configNr); -int rndis_signal_connect (int configNr); -int rndis_signal_disconnect (int configNr); -int rndis_state (int configNr); -extern void rndis_set_host_mac (int configNr, const u8 *addr); - -int rndis_init(void); -void rndis_exit (void); - -#endif /* _LINUX_RNDIS_H */ diff --git a/drivers/staging/ccg/storage_common.c b/drivers/staging/ccg/storage_common.c deleted file mode 100644 index abb01ac74ce..00000000000 --- a/drivers/staging/ccg/storage_common.c +++ /dev/null @@ -1,893 +0,0 @@ -/* - * storage_common.c -- Common definitions for mass storage functionality - * - * Copyright (C) 2003-2008 Alan Stern - * Copyeight (C) 2009 Samsung Electronics - * Author: Michal Nazarewicz (mina86@mina86.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - - -/* - * This file requires the following identifiers used in USB strings to - * be defined (each of type pointer to char): - * - fsg_string_manufacturer -- name of the manufacturer - * - fsg_string_product -- name of the product - * - fsg_string_config -- name of the configuration - * - fsg_string_interface -- name of the interface - * The first four are only needed when FSG_DESCRIPTORS_DEVICE_STRINGS - * macro is defined prior to including this file. - */ - -/* - * When FSG_NO_INTR_EP is defined fsg_fs_intr_in_desc and - * fsg_hs_intr_in_desc objects as well as - * FSG_FS_FUNCTION_PRE_EP_ENTRIES and FSG_HS_FUNCTION_PRE_EP_ENTRIES - * macros are not defined. - * - * When FSG_NO_DEVICE_STRINGS is defined FSG_STRING_MANUFACTURER, - * FSG_STRING_PRODUCT, FSG_STRING_SERIAL and FSG_STRING_CONFIG are not - * defined (as well as corresponding entries in string tables are - * missing) and FSG_STRING_INTERFACE has value of zero. - * - * When FSG_NO_OTG is defined fsg_otg_desc won't be defined. - */ - -/* - * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers - * sets the number of pipeline buffers (length of the fsg_buffhd array). - * The valid range of num_buffers is: num >= 2 && num <= 4. - */ - - -#include -#include -#include - - -/* - * Thanks to NetChip Technologies for donating this product ID. - * - * DO NOT REUSE THESE IDs with any other driver!! Ever!! - * Instead: allocate your own, using normal USB-IF procedures. - */ -#define FSG_VENDOR_ID 0x0525 /* NetChip */ -#define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */ - - -/*-------------------------------------------------------------------------*/ - - -#ifndef DEBUG -#undef VERBOSE_DEBUG -#undef DUMP_MSGS -#endif /* !DEBUG */ - -#ifdef VERBOSE_DEBUG -#define VLDBG LDBG -#else -#define VLDBG(lun, fmt, args...) do { } while (0) -#endif /* VERBOSE_DEBUG */ - -#define LDBG(lun, fmt, args...) dev_dbg (&(lun)->dev, fmt, ## args) -#define LERROR(lun, fmt, args...) dev_err (&(lun)->dev, fmt, ## args) -#define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args) -#define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args) - -/* - * Keep those macros in sync with those in - * include/linux/usb/composite.h or else GCC will complain. If they - * are identical (the same names of arguments, white spaces in the - * same places) GCC will allow redefinition otherwise (even if some - * white space is removed or added) warning will be issued. - * - * Those macros are needed here because File Storage Gadget does not - * include the composite.h header. For composite gadgets those macros - * are redundant since composite.h is included any way. - * - * One could check whether those macros are already defined (which - * would indicate composite.h had been included) or not (which would - * indicate we were in FSG) but this is not done because a warning is - * desired if definitions here differ from the ones in composite.h. - * - * We want the definitions to match and be the same in File Storage - * Gadget as well as Mass Storage Function (and so composite gadgets - * using MSF). If someone changes them in composite.h it will produce - * a warning in this file when building MSF. - */ -#define DBG(d, fmt, args...) dev_dbg(&(d)->gadget->dev , fmt , ## args) -#define VDBG(d, fmt, args...) dev_vdbg(&(d)->gadget->dev , fmt , ## args) -#define ERROR(d, fmt, args...) dev_err(&(d)->gadget->dev , fmt , ## args) -#define WARNING(d, fmt, args...) dev_warn(&(d)->gadget->dev , fmt , ## args) -#define INFO(d, fmt, args...) dev_info(&(d)->gadget->dev , fmt , ## args) - - - -#ifdef DUMP_MSGS - -# define dump_msg(fsg, /* const char * */ label, \ - /* const u8 * */ buf, /* unsigned */ length) do { \ - if (length < 512) { \ - DBG(fsg, "%s, length %u:\n", label, length); \ - print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \ - 16, 1, buf, length, 0); \ - } \ -} while (0) - -# define dump_cdb(fsg) do { } while (0) - -#else - -# define dump_msg(fsg, /* const char * */ label, \ - /* const u8 * */ buf, /* unsigned */ length) do { } while (0) - -# ifdef VERBOSE_DEBUG - -# define dump_cdb(fsg) \ - print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, \ - 16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0) \ - -# else - -# define dump_cdb(fsg) do { } while (0) - -# endif /* VERBOSE_DEBUG */ - -#endif /* DUMP_MSGS */ - -/*-------------------------------------------------------------------------*/ - -/* CBI Interrupt data structure */ -struct interrupt_data { - u8 bType; - u8 bValue; -}; - -#define CBI_INTERRUPT_DATA_LEN 2 - -/* CBI Accept Device-Specific Command request */ -#define USB_CBI_ADSC_REQUEST 0x00 - - -/* Length of a SCSI Command Data Block */ -#define MAX_COMMAND_SIZE 16 - -/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */ -#define SS_NO_SENSE 0 -#define SS_COMMUNICATION_FAILURE 0x040800 -#define SS_INVALID_COMMAND 0x052000 -#define SS_INVALID_FIELD_IN_CDB 0x052400 -#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100 -#define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500 -#define SS_MEDIUM_NOT_PRESENT 0x023a00 -#define SS_MEDIUM_REMOVAL_PREVENTED 0x055302 -#define SS_NOT_READY_TO_READY_TRANSITION 0x062800 -#define SS_RESET_OCCURRED 0x062900 -#define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900 -#define SS_UNRECOVERED_READ_ERROR 0x031100 -#define SS_WRITE_ERROR 0x030c02 -#define SS_WRITE_PROTECTED 0x072700 - -#define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */ -#define ASC(x) ((u8) ((x) >> 8)) -#define ASCQ(x) ((u8) (x)) - - -/*-------------------------------------------------------------------------*/ - - -struct fsg_lun { - struct file *filp; - loff_t file_length; - loff_t num_sectors; - - unsigned int initially_ro:1; - unsigned int ro:1; - unsigned int removable:1; - unsigned int cdrom:1; - unsigned int prevent_medium_removal:1; - unsigned int registered:1; - unsigned int info_valid:1; - unsigned int nofua:1; - - u32 sense_data; - u32 sense_data_info; - u32 unit_attention_data; - - unsigned int blkbits; /* Bits of logical block size of bound block device */ - unsigned int blksize; /* logical block size of bound block device */ - struct device dev; -}; - -#define fsg_lun_is_open(curlun) ((curlun)->filp != NULL) - -static struct fsg_lun *fsg_lun_from_dev(struct device *dev) -{ - return container_of(dev, struct fsg_lun, dev); -} - - -/* Big enough to hold our biggest descriptor */ -#define EP0_BUFSIZE 256 -#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ - -#ifdef CONFIG_USB_GADGET_DEBUG_FILES - -static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS; -module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO); -MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers"); - -#else - -/* - * Number of buffers we will use. - * 2 is usually enough for good buffering pipeline - */ -#define fsg_num_buffers CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS - -#endif /* CONFIG_USB_DEBUG */ - -/* check if fsg_num_buffers is within a valid range */ -static inline int fsg_num_buffers_validate(void) -{ - if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4) - return 0; - pr_err("fsg_num_buffers %u is out of range (%d to %d)\n", - fsg_num_buffers, 2 ,4); - return -EINVAL; -} - -/* Default size of buffer length. */ -#define FSG_BUFLEN ((u32)16384) - -/* Maximal number of LUNs supported in mass storage function */ -#define FSG_MAX_LUNS 8 - -enum fsg_buffer_state { - BUF_STATE_EMPTY = 0, - BUF_STATE_FULL, - BUF_STATE_BUSY -}; - -struct fsg_buffhd { - void *buf; - enum fsg_buffer_state state; - struct fsg_buffhd *next; - - /* - * The NetChip 2280 is faster, and handles some protocol faults - * better, if we don't submit any short bulk-out read requests. - * So we will record the intended request length here. - */ - unsigned int bulk_out_intended_length; - - struct usb_request *inreq; - int inreq_busy; - struct usb_request *outreq; - int outreq_busy; -}; - -enum fsg_state { - /* This one isn't used anywhere */ - FSG_STATE_COMMAND_PHASE = -10, - FSG_STATE_DATA_PHASE, - FSG_STATE_STATUS_PHASE, - - FSG_STATE_IDLE = 0, - FSG_STATE_ABORT_BULK_OUT, - FSG_STATE_RESET, - FSG_STATE_INTERFACE_CHANGE, - FSG_STATE_CONFIG_CHANGE, - FSG_STATE_DISCONNECT, - FSG_STATE_EXIT, - FSG_STATE_TERMINATED -}; - -enum data_direction { - DATA_DIR_UNKNOWN = 0, - DATA_DIR_FROM_HOST, - DATA_DIR_TO_HOST, - DATA_DIR_NONE -}; - - -/*-------------------------------------------------------------------------*/ - - -static inline u32 get_unaligned_be24(u8 *buf) -{ - return 0xffffff & (u32) get_unaligned_be32(buf - 1); -} - - -/*-------------------------------------------------------------------------*/ - - -enum { -#ifndef FSG_NO_DEVICE_STRINGS - FSG_STRING_MANUFACTURER = 1, - FSG_STRING_PRODUCT, - FSG_STRING_SERIAL, - FSG_STRING_CONFIG, -#endif - FSG_STRING_INTERFACE -}; - - -#ifndef FSG_NO_OTG -static struct usb_otg_descriptor -fsg_otg_desc = { - .bLength = sizeof fsg_otg_desc, - .bDescriptorType = USB_DT_OTG, - - .bmAttributes = USB_OTG_SRP, -}; -#endif - -/* There is only one interface. */ - -static struct usb_interface_descriptor -fsg_intf_desc = { - .bLength = sizeof fsg_intf_desc, - .bDescriptorType = USB_DT_INTERFACE, - - .bNumEndpoints = 2, /* Adjusted during fsg_bind() */ - .bInterfaceClass = USB_CLASS_MASS_STORAGE, - .bInterfaceSubClass = USB_SC_SCSI, /* Adjusted during fsg_bind() */ - .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */ - .iInterface = FSG_STRING_INTERFACE, -}; - -/* - * Three full-speed endpoint descriptors: bulk-in, bulk-out, and - * interrupt-in. - */ - -static struct usb_endpoint_descriptor -fsg_fs_bulk_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - /* wMaxPacketSize set by autoconfiguration */ -}; - -static struct usb_endpoint_descriptor -fsg_fs_bulk_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - /* wMaxPacketSize set by autoconfiguration */ -}; - -#ifndef FSG_NO_INTR_EP - -static struct usb_endpoint_descriptor -fsg_fs_intr_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(2), - .bInterval = 32, /* frames -> 32 ms */ -}; - -#ifndef FSG_NO_OTG -# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 2 -#else -# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 1 -#endif - -#endif - -static struct usb_descriptor_header *fsg_fs_function[] = { -#ifndef FSG_NO_OTG - (struct usb_descriptor_header *) &fsg_otg_desc, -#endif - (struct usb_descriptor_header *) &fsg_intf_desc, - (struct usb_descriptor_header *) &fsg_fs_bulk_in_desc, - (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc, -#ifndef FSG_NO_INTR_EP - (struct usb_descriptor_header *) &fsg_fs_intr_in_desc, -#endif - NULL, -}; - - -/* - * USB 2.0 devices need to expose both high speed and full speed - * descriptors, unless they only run at full speed. - * - * That means alternate endpoint descriptors (bigger packets) - * and a "device qualifier" ... plus more construction options - * for the configuration descriptor. - */ -static struct usb_endpoint_descriptor -fsg_hs_bulk_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512), -}; - -static struct usb_endpoint_descriptor -fsg_hs_bulk_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512), - .bInterval = 1, /* NAK every 1 uframe */ -}; - -#ifndef FSG_NO_INTR_EP - -static struct usb_endpoint_descriptor -fsg_hs_intr_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(2), - .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */ -}; - -#ifndef FSG_NO_OTG -# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 2 -#else -# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 1 -#endif - -#endif - -static struct usb_descriptor_header *fsg_hs_function[] = { -#ifndef FSG_NO_OTG - (struct usb_descriptor_header *) &fsg_otg_desc, -#endif - (struct usb_descriptor_header *) &fsg_intf_desc, - (struct usb_descriptor_header *) &fsg_hs_bulk_in_desc, - (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc, -#ifndef FSG_NO_INTR_EP - (struct usb_descriptor_header *) &fsg_hs_intr_in_desc, -#endif - NULL, -}; - -static struct usb_endpoint_descriptor -fsg_ss_bulk_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(1024), -}; - -static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { - .bLength = sizeof(fsg_ss_bulk_in_comp_desc), - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, - - /*.bMaxBurst = DYNAMIC, */ -}; - -static struct usb_endpoint_descriptor -fsg_ss_bulk_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(1024), -}; - -static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { - .bLength = sizeof(fsg_ss_bulk_in_comp_desc), - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, - - /*.bMaxBurst = DYNAMIC, */ -}; - -#ifndef FSG_NO_INTR_EP - -static struct usb_endpoint_descriptor -fsg_ss_intr_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(2), - .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */ -}; - -static struct usb_ss_ep_comp_descriptor fsg_ss_intr_in_comp_desc = { - .bLength = sizeof(fsg_ss_bulk_in_comp_desc), - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, - - .wBytesPerInterval = cpu_to_le16(2), -}; - -#ifndef FSG_NO_OTG -# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 2 -#else -# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 1 -#endif - -#endif - -static __maybe_unused struct usb_ext_cap_descriptor fsg_ext_cap_desc = { - .bLength = USB_DT_USB_EXT_CAP_SIZE, - .bDescriptorType = USB_DT_DEVICE_CAPABILITY, - .bDevCapabilityType = USB_CAP_TYPE_EXT, - - .bmAttributes = cpu_to_le32(USB_LPM_SUPPORT), -}; - -static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = { - .bLength = USB_DT_USB_SS_CAP_SIZE, - .bDescriptorType = USB_DT_DEVICE_CAPABILITY, - .bDevCapabilityType = USB_SS_CAP_TYPE, - - /* .bmAttributes = LTM is not supported yet */ - - .wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION - | USB_FULL_SPEED_OPERATION - | USB_HIGH_SPEED_OPERATION - | USB_5GBPS_OPERATION), - .bFunctionalitySupport = USB_LOW_SPEED_OPERATION, - .bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT, - .bU2DevExitLat = cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT), -}; - -static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = { - .bLength = USB_DT_BOS_SIZE, - .bDescriptorType = USB_DT_BOS, - - .wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE - + USB_DT_USB_EXT_CAP_SIZE - + USB_DT_USB_SS_CAP_SIZE), - - .bNumDeviceCaps = 2, -}; - -static struct usb_descriptor_header *fsg_ss_function[] = { -#ifndef FSG_NO_OTG - (struct usb_descriptor_header *) &fsg_otg_desc, -#endif - (struct usb_descriptor_header *) &fsg_intf_desc, - (struct usb_descriptor_header *) &fsg_ss_bulk_in_desc, - (struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc, - (struct usb_descriptor_header *) &fsg_ss_bulk_out_desc, - (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc, -#ifndef FSG_NO_INTR_EP - (struct usb_descriptor_header *) &fsg_ss_intr_in_desc, - (struct usb_descriptor_header *) &fsg_ss_intr_in_comp_desc, -#endif - NULL, -}; - -/* Maxpacket and other transfer characteristics vary by speed. */ -static __maybe_unused struct usb_endpoint_descriptor * -fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs, - struct usb_endpoint_descriptor *hs, - struct usb_endpoint_descriptor *ss) -{ - if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) - return ss; - else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) - return hs; - return fs; -} - - -/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ -static struct usb_string fsg_strings[] = { -#ifndef FSG_NO_DEVICE_STRINGS - {FSG_STRING_MANUFACTURER, fsg_string_manufacturer}, - {FSG_STRING_PRODUCT, fsg_string_product}, - {FSG_STRING_SERIAL, ""}, - {FSG_STRING_CONFIG, fsg_string_config}, -#endif - {FSG_STRING_INTERFACE, fsg_string_interface}, - {} -}; - -static struct usb_gadget_strings fsg_stringtab = { - .language = 0x0409, /* en-us */ - .strings = fsg_strings, -}; - - - /*-------------------------------------------------------------------------*/ - -/* - * If the next two routines are called while the gadget is registered, - * the caller must own fsg->filesem for writing. - */ - -static void fsg_lun_close(struct fsg_lun *curlun) -{ - if (curlun->filp) { - LDBG(curlun, "close backing file\n"); - fput(curlun->filp); - curlun->filp = NULL; - } -} - - -static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) -{ - int ro; - struct file *filp = NULL; - int rc = -EINVAL; - struct inode *inode = NULL; - loff_t size; - loff_t num_sectors; - loff_t min_sectors; - unsigned int blkbits; - unsigned int blksize; - - /* R/W if we can, R/O if we must */ - ro = curlun->initially_ro; - if (!ro) { - filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0); - if (PTR_ERR(filp) == -EROFS || PTR_ERR(filp) == -EACCES) - ro = 1; - } - if (ro) - filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0); - if (IS_ERR(filp)) { - LINFO(curlun, "unable to open backing file: %s\n", filename); - return PTR_ERR(filp); - } - - if (!(filp->f_mode & FMODE_WRITE)) - ro = 1; - - inode = file_inode(filp); - if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) { - LINFO(curlun, "invalid file type: %s\n", filename); - goto out; - } - - /* - * If we can't read the file, it's no good. - * If we can't write the file, use it read-only. - */ - if (!(filp->f_op->read || filp->f_op->aio_read)) { - LINFO(curlun, "file not readable: %s\n", filename); - goto out; - } - if (!(filp->f_op->write || filp->f_op->aio_write)) - ro = 1; - - size = i_size_read(inode->i_mapping->host); - if (size < 0) { - LINFO(curlun, "unable to find file size: %s\n", filename); - rc = (int) size; - goto out; - } - - if (curlun->cdrom) { - blksize = 2048; - blkbits = 11; - } else if (inode->i_bdev) { - blksize = bdev_logical_block_size(inode->i_bdev); - blkbits = blksize_bits(blksize); - } else { - blksize = 512; - blkbits = 9; - } - - num_sectors = size >> blkbits; /* File size in logic-block-size blocks */ - min_sectors = 1; - if (curlun->cdrom) { - min_sectors = 300; /* Smallest track is 300 frames */ - if (num_sectors >= 256*60*75) { - num_sectors = 256*60*75 - 1; - LINFO(curlun, "file too big: %s\n", filename); - LINFO(curlun, "using only first %d blocks\n", - (int) num_sectors); - } - } - if (num_sectors < min_sectors) { - LINFO(curlun, "file too small: %s\n", filename); - rc = -ETOOSMALL; - goto out; - } - - if (fsg_lun_is_open(curlun)) - fsg_lun_close(curlun); - - curlun->blksize = blksize; - curlun->blkbits = blkbits; - curlun->ro = ro; - curlun->filp = filp; - curlun->file_length = size; - curlun->num_sectors = num_sectors; - LDBG(curlun, "open backing file: %s\n", filename); - return 0; - -out: - fput(filp); - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -/* - * Sync the file data, don't bother with the metadata. - * This code was copied from fs/buffer.c:sys_fdatasync(). - */ -static int fsg_lun_fsync_sub(struct fsg_lun *curlun) -{ - struct file *filp = curlun->filp; - - if (curlun->ro || !filp) - return 0; - return vfs_fsync(filp, 1); -} - -static void store_cdrom_address(u8 *dest, int msf, u32 addr) -{ - if (msf) { - /* Convert to Minutes-Seconds-Frames */ - addr >>= 2; /* Convert to 2048-byte frames */ - addr += 2*75; /* Lead-in occupies 2 seconds */ - dest[3] = addr % 75; /* Frames */ - addr /= 75; - dest[2] = addr % 60; /* Seconds */ - addr /= 60; - dest[1] = addr; /* Minutes */ - dest[0] = 0; /* Reserved */ - } else { - /* Absolute sector */ - put_unaligned_be32(addr, dest); - } -} - - -/*-------------------------------------------------------------------------*/ - - -static ssize_t fsg_show_ro(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - - return sprintf(buf, "%d\n", fsg_lun_is_open(curlun) - ? curlun->ro - : curlun->initially_ro); -} - -static ssize_t fsg_show_nofua(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - - return sprintf(buf, "%u\n", curlun->nofua); -} - -static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - struct rw_semaphore *filesem = dev_get_drvdata(dev); - char *p; - ssize_t rc; - - down_read(filesem); - if (fsg_lun_is_open(curlun)) { /* Get the complete pathname */ - p = d_path(&curlun->filp->f_path, buf, PAGE_SIZE - 1); - if (IS_ERR(p)) - rc = PTR_ERR(p); - else { - rc = strlen(p); - memmove(buf, p, rc); - buf[rc] = '\n'; /* Add a newline */ - buf[++rc] = 0; - } - } else { /* No file, return 0 bytes */ - *buf = 0; - rc = 0; - } - up_read(filesem); - return rc; -} - - -static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - ssize_t rc; - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - struct rw_semaphore *filesem = dev_get_drvdata(dev); - unsigned ro; - - rc = kstrtouint(buf, 2, &ro); - if (rc) - return rc; - - /* - * Allow the write-enable status to change only while the - * backing file is closed. - */ - down_read(filesem); - if (fsg_lun_is_open(curlun)) { - LDBG(curlun, "read-only status change prevented\n"); - rc = -EBUSY; - } else { - curlun->ro = ro; - curlun->initially_ro = ro; - LDBG(curlun, "read-only status set to %d\n", curlun->ro); - rc = count; - } - up_read(filesem); - return rc; -} - -static ssize_t fsg_store_nofua(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - unsigned nofua; - int ret; - - ret = kstrtouint(buf, 2, &nofua); - if (ret) - return ret; - - /* Sync data when switching from async mode to sync */ - if (!nofua && curlun->nofua) - fsg_lun_fsync_sub(curlun); - - curlun->nofua = nofua; - - return count; -} - -static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - struct rw_semaphore *filesem = dev_get_drvdata(dev); - int rc = 0; - - if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) { - LDBG(curlun, "eject attempt prevented\n"); - return -EBUSY; /* "Door is locked" */ - } - - /* Remove a trailing newline */ - if (count > 0 && buf[count-1] == '\n') - ((char *) buf)[count-1] = 0; /* Ugh! */ - - /* Load new medium */ - down_write(filesem); - if (count > 0 && buf[0]) { - /* fsg_lun_open() will close existing file if any. */ - rc = fsg_lun_open(curlun, buf); - if (rc == 0) - curlun->unit_attention_data = - SS_NOT_READY_TO_READY_TRANSITION; - } else if (fsg_lun_is_open(curlun)) { - fsg_lun_close(curlun); - curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; - } - up_write(filesem); - return (rc < 0 ? rc : count); -} diff --git a/drivers/staging/ccg/sysfs-class-ccg_usb b/drivers/staging/ccg/sysfs-class-ccg_usb deleted file mode 100644 index dd12a332fb0..00000000000 --- a/drivers/staging/ccg/sysfs-class-ccg_usb +++ /dev/null @@ -1,158 +0,0 @@ -What: /sys/class/ccg_usb -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - The ccg_usb/ class subdirectory belongs to ccg - USB gadget. - -What: /sys/class/ccg_usb/ccgX -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - The /sys/class/ccg_usb/ccg{0,1,2,3...} class - subdirectories correspond to each ccg gadget device; - at the time of this writing there is only ccg0 and it - represents the ccg gadget. - -What: /sys/class/ccg_usb/ccgX/functions -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - A comma-separated list of USB function names to be activated - in this ccg gadget. It includes both the functions provided - in-kernel by the ccg gadget and the functions provided from - userspace through FunctionFS. - -What: /sys/class/ccg_usb/ccgX/enable -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - A flag activating/deactivating the ccg usb gadget. - -What: /sys/class/ccg_usb/ccgX/state -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - Configurable usb gadget state: - - DISCONNECTED - CONNECTED - CONFIGURED - -What: /sys/class/ccg_usb/ccgX/f_acm/ -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - The /sys/class/ccg_usb/ccgX/f_acm subdirectory - corresponds to the gadget's USB CDC serial (ACM) function - driver. - -What: /sys/class/ccg_usb/ccgX/f_acm/instances -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - Maximum number of the /dev/ttyGS interface the driver uses. - -What: /sys/class/ccg_usb/ccgX/f_fs -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - The /sys/class/ccg_usb/ccgX/f_fs subdirectory - corresponds to the gadget's FunctionFS driver. - -What: /sys/class/ccg_usb/ccgX/f_fs/user_functions -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - A comma-separeted list of USB function names to be supported - from userspace. No other userspace FunctionFS functions can - be supported than listed here. However, the actual activation - of these functions is still done through - /sys/class/ccg_usb/ccgX/functions, where it is possible - to specify any subset (including maximum and empty) of - /sys/class/ccg_usb/ccgX/f_fs/user_functions. - -What: /sys/class/ccg_usb/ccgX/f_fs/max_user_functions -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - Maximum number of USB functions to be supported from userspace. - -What: /sys/class/ccg_usb/ccgX/f_rndis -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - The /sys/class/ccg_usb/ccgX/f_rndis subdirectory - corresponds to the gadget's RNDIS driver. - -What: /sys/class/ccg_usb/ccgX/f_rndis/manufacturer -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - RNDIS Ethernet port manufacturer string. - -What: /sys/class/ccg_usb/ccgX/f_rndis/wceis -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - RNDIS Ethernet port wireless flag. - -What: /sys/class/ccg_usb/ccgX/f_rndis/ethaddr -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - RNDIS Ethernet port Ethernet address. - -What: /sys/class/ccg_usb/ccgX/f_rndis/vendorID -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - RNDIS Ethernet port vendor ID. - -What: /sys/class/ccg_usb/ccgX/f_mass_storage -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - The /sys/class/ccg_usb/ccgX/f_mass_storage subdirectory - corresponds to the gadget's USB mass storage driver. - -What: /sys/class/ccg_usb/ccgX/f_mass_storage/lun -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - The /sys/class/ccg_usb/ccgX/f_mass_storage/lun - subdirectory corresponds to the gadget's USB mass storage - driver and its underlying storage. - -What: /sys/class/ccg_usb/ccgX/f_mass_storage/lun -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - The /sys/class/ccg_usb/ccgX/f_mass_storage/lun - subdirectory corresponds to the gadget's USB mass storage - driver and its underlying storage. - -What: /sys/class/ccg_usb/ccgX/f_mass_storage/lun/file -Date: May 2012 -KernelVersion: 3.4 -Contact: linux-usb@vger.kernel.org -Description: - Gadget's USB mass storage underlying file. diff --git a/drivers/staging/ccg/u_ether.c b/drivers/staging/ccg/u_ether.c deleted file mode 100644 index fed78865adc..00000000000 --- a/drivers/staging/ccg/u_ether.c +++ /dev/null @@ -1,986 +0,0 @@ -/* - * u_ether.c -- Ethernet-over-USB link layer utilities for Gadget stack - * - * Copyright (C) 2003-2005,2008 David Brownell - * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger - * Copyright (C) 2008 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* #define VERBOSE_DEBUG */ - -#include -#include -#include -#include -#include -#include - -#include "u_ether.h" - - -/* - * This component encapsulates the Ethernet link glue needed to provide - * one (!) network link through the USB gadget stack, normally "usb0". - * - * The control and data models are handled by the function driver which - * connects to this code; such as CDC Ethernet (ECM or EEM), - * "CDC Subset", or RNDIS. That includes all descriptor and endpoint - * management. - * - * Link level addressing is handled by this component using module - * parameters; if no such parameters are provided, random link level - * addresses are used. Each end of the link uses one address. The - * host end address is exported in various ways, and is often recorded - * in configuration databases. - * - * The driver which assembles each configuration using such a link is - * responsible for ensuring that each configuration includes at most one - * instance of is network link. (The network layer provides ways for - * this single "physical" link to be used by multiple virtual links.) - */ - -#define UETH__VERSION "29-May-2008" - -struct eth_dev { - /* lock is held while accessing port_usb - * or updating its backlink port_usb->ioport - */ - spinlock_t lock; - struct gether *port_usb; - - struct net_device *net; - struct usb_gadget *gadget; - - spinlock_t req_lock; /* guard {rx,tx}_reqs */ - struct list_head tx_reqs, rx_reqs; - atomic_t tx_qlen; - - struct sk_buff_head rx_frames; - - unsigned header_len; - struct sk_buff *(*wrap)(struct gether *, struct sk_buff *skb); - int (*unwrap)(struct gether *, - struct sk_buff *skb, - struct sk_buff_head *list); - - struct work_struct work; - - unsigned long todo; -#define WORK_RX_MEMORY 0 - - bool zlp; - u8 host_mac[ETH_ALEN]; -}; - -/*-------------------------------------------------------------------------*/ - -#define RX_EXTRA 20 /* bytes guarding against rx overflows */ - -#define DEFAULT_QLEN 2 /* double buffering by default */ - -static unsigned qmult = 5; -module_param(qmult, uint, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed"); - -/* for dual-speed hardware, use deeper queues at high/super speed */ -static inline int qlen(struct usb_gadget *gadget) -{ - if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH || - gadget->speed == USB_SPEED_SUPER)) - return qmult * DEFAULT_QLEN; - else - return DEFAULT_QLEN; -} - -/*-------------------------------------------------------------------------*/ - -/* REVISIT there must be a better way than having two sets - * of debug calls ... - */ - -#undef DBG -#undef VDBG -#undef ERROR -#undef INFO - -#define xprintk(d, level, fmt, args...) \ - printk(level "%s: " fmt , (d)->net->name , ## args) - -#ifdef DEBUG -#undef DEBUG -#define DBG(dev, fmt, args...) \ - xprintk(dev , KERN_DEBUG , fmt , ## args) -#else -#define DBG(dev, fmt, args...) \ - do { } while (0) -#endif /* DEBUG */ - -#ifdef VERBOSE_DEBUG -#define VDBG DBG -#else -#define VDBG(dev, fmt, args...) \ - do { } while (0) -#endif /* DEBUG */ - -#define ERROR(dev, fmt, args...) \ - xprintk(dev , KERN_ERR , fmt , ## args) -#define INFO(dev, fmt, args...) \ - xprintk(dev , KERN_INFO , fmt , ## args) - -/*-------------------------------------------------------------------------*/ - -/* NETWORK DRIVER HOOKUP (to the layer above this driver) */ - -static int ueth_change_mtu(struct net_device *net, int new_mtu) -{ - struct eth_dev *dev = netdev_priv(net); - unsigned long flags; - int status = 0; - - /* don't change MTU on "live" link (peer won't know) */ - spin_lock_irqsave(&dev->lock, flags); - if (dev->port_usb) - status = -EBUSY; - else if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN) - status = -ERANGE; - else - net->mtu = new_mtu; - spin_unlock_irqrestore(&dev->lock, flags); - - return status; -} - -static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) -{ - struct eth_dev *dev = netdev_priv(net); - - strlcpy(p->driver, "g_ether", sizeof(p->driver)); - strlcpy(p->version, UETH__VERSION, sizeof(p->version)); - strlcpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version)); - strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info)); -} - -/* REVISIT can also support: - * - WOL (by tracking suspends and issuing remote wakeup) - * - msglevel (implies updated messaging) - * - ... probably more ethtool ops - */ - -static const struct ethtool_ops ops = { - .get_drvinfo = eth_get_drvinfo, - .get_link = ethtool_op_get_link, -}; - -static void defer_kevent(struct eth_dev *dev, int flag) -{ - if (test_and_set_bit(flag, &dev->todo)) - return; - if (!schedule_work(&dev->work)) - ERROR(dev, "kevent %d may have been dropped\n", flag); - else - DBG(dev, "kevent %d scheduled\n", flag); -} - -static void rx_complete(struct usb_ep *ep, struct usb_request *req); - -static int -rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) -{ - struct sk_buff *skb; - int retval = -ENOMEM; - size_t size = 0; - struct usb_ep *out; - unsigned long flags; - - spin_lock_irqsave(&dev->lock, flags); - if (dev->port_usb) - out = dev->port_usb->out_ep; - else - out = NULL; - spin_unlock_irqrestore(&dev->lock, flags); - - if (!out) - return -ENOTCONN; - - - /* Padding up to RX_EXTRA handles minor disagreements with host. - * Normally we use the USB "terminate on short read" convention; - * so allow up to (N*maxpacket), since that memory is normally - * already allocated. Some hardware doesn't deal well with short - * reads (e.g. DMA must be N*maxpacket), so for now don't trim a - * byte off the end (to force hardware errors on overflow). - * - * RNDIS uses internal framing, and explicitly allows senders to - * pad to end-of-packet. That's potentially nice for speed, but - * means receivers can't recover lost synch on their own (because - * new packets don't only start after a short RX). - */ - size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA; - size += dev->port_usb->header_len; - size += out->maxpacket - 1; - size -= size % out->maxpacket; - - if (dev->port_usb->is_fixed) - size = max_t(size_t, size, dev->port_usb->fixed_out_len); - - skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags); - if (skb == NULL) { - DBG(dev, "no rx skb\n"); - goto enomem; - } - - /* Some platforms perform better when IP packets are aligned, - * but on at least one, checksumming fails otherwise. Note: - * RNDIS headers involve variable numbers of LE32 values. - */ - skb_reserve(skb, NET_IP_ALIGN); - - req->buf = skb->data; - req->length = size; - req->complete = rx_complete; - req->context = skb; - - retval = usb_ep_queue(out, req, gfp_flags); - if (retval == -ENOMEM) -enomem: - defer_kevent(dev, WORK_RX_MEMORY); - if (retval) { - DBG(dev, "rx submit --> %d\n", retval); - if (skb) - dev_kfree_skb_any(skb); - spin_lock_irqsave(&dev->req_lock, flags); - list_add(&req->list, &dev->rx_reqs); - spin_unlock_irqrestore(&dev->req_lock, flags); - } - return retval; -} - -static void rx_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct sk_buff *skb = req->context, *skb2; - struct eth_dev *dev = ep->driver_data; - int status = req->status; - - switch (status) { - - /* normal completion */ - case 0: - skb_put(skb, req->actual); - - if (dev->unwrap) { - unsigned long flags; - - spin_lock_irqsave(&dev->lock, flags); - if (dev->port_usb) { - status = dev->unwrap(dev->port_usb, - skb, - &dev->rx_frames); - } else { - dev_kfree_skb_any(skb); - status = -ENOTCONN; - } - spin_unlock_irqrestore(&dev->lock, flags); - } else { - skb_queue_tail(&dev->rx_frames, skb); - } - skb = NULL; - - skb2 = skb_dequeue(&dev->rx_frames); - while (skb2) { - if (status < 0 - || ETH_HLEN > skb2->len - || skb2->len > ETH_FRAME_LEN) { - dev->net->stats.rx_errors++; - dev->net->stats.rx_length_errors++; - DBG(dev, "rx length %d\n", skb2->len); - dev_kfree_skb_any(skb2); - goto next_frame; - } - skb2->protocol = eth_type_trans(skb2, dev->net); - dev->net->stats.rx_packets++; - dev->net->stats.rx_bytes += skb2->len; - - /* no buffer copies needed, unless hardware can't - * use skb buffers. - */ - status = netif_rx(skb2); -next_frame: - skb2 = skb_dequeue(&dev->rx_frames); - } - break; - - /* software-driven interface shutdown */ - case -ECONNRESET: /* unlink */ - case -ESHUTDOWN: /* disconnect etc */ - VDBG(dev, "rx shutdown, code %d\n", status); - goto quiesce; - - /* for hardware automagic (such as pxa) */ - case -ECONNABORTED: /* endpoint reset */ - DBG(dev, "rx %s reset\n", ep->name); - defer_kevent(dev, WORK_RX_MEMORY); -quiesce: - dev_kfree_skb_any(skb); - goto clean; - - /* data overrun */ - case -EOVERFLOW: - dev->net->stats.rx_over_errors++; - /* FALLTHROUGH */ - - default: - dev->net->stats.rx_errors++; - DBG(dev, "rx status %d\n", status); - break; - } - - if (skb) - dev_kfree_skb_any(skb); - if (!netif_running(dev->net)) { -clean: - spin_lock(&dev->req_lock); - list_add(&req->list, &dev->rx_reqs); - spin_unlock(&dev->req_lock); - req = NULL; - } - if (req) - rx_submit(dev, req, GFP_ATOMIC); -} - -static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n) -{ - unsigned i; - struct usb_request *req; - - if (!n) - return -ENOMEM; - - /* queue/recycle up to N requests */ - i = n; - list_for_each_entry(req, list, list) { - if (i-- == 0) - goto extra; - } - while (i--) { - req = usb_ep_alloc_request(ep, GFP_ATOMIC); - if (!req) - return list_empty(list) ? -ENOMEM : 0; - list_add(&req->list, list); - } - return 0; - -extra: - /* free extras */ - for (;;) { - struct list_head *next; - - next = req->list.next; - list_del(&req->list); - usb_ep_free_request(ep, req); - - if (next == list) - break; - - req = container_of(next, struct usb_request, list); - } - return 0; -} - -static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n) -{ - int status; - - spin_lock(&dev->req_lock); - status = prealloc(&dev->tx_reqs, link->in_ep, n); - if (status < 0) - goto fail; - status = prealloc(&dev->rx_reqs, link->out_ep, n); - if (status < 0) - goto fail; - goto done; -fail: - DBG(dev, "can't alloc requests\n"); -done: - spin_unlock(&dev->req_lock); - return status; -} - -static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) -{ - struct usb_request *req; - unsigned long flags; - - /* fill unused rxq slots with some skb */ - spin_lock_irqsave(&dev->req_lock, flags); - while (!list_empty(&dev->rx_reqs)) { - req = container_of(dev->rx_reqs.next, - struct usb_request, list); - list_del_init(&req->list); - spin_unlock_irqrestore(&dev->req_lock, flags); - - if (rx_submit(dev, req, gfp_flags) < 0) { - defer_kevent(dev, WORK_RX_MEMORY); - return; - } - - spin_lock_irqsave(&dev->req_lock, flags); - } - spin_unlock_irqrestore(&dev->req_lock, flags); -} - -static void eth_work(struct work_struct *work) -{ - struct eth_dev *dev = container_of(work, struct eth_dev, work); - - if (test_and_clear_bit(WORK_RX_MEMORY, &dev->todo)) { - if (netif_running(dev->net)) - rx_fill(dev, GFP_KERNEL); - } - - if (dev->todo) - DBG(dev, "work done, flags = 0x%lx\n", dev->todo); -} - -static void tx_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct sk_buff *skb = req->context; - struct eth_dev *dev = ep->driver_data; - - switch (req->status) { - default: - dev->net->stats.tx_errors++; - VDBG(dev, "tx err %d\n", req->status); - /* FALLTHROUGH */ - case -ECONNRESET: /* unlink */ - case -ESHUTDOWN: /* disconnect etc */ - break; - case 0: - dev->net->stats.tx_bytes += skb->len; - } - dev->net->stats.tx_packets++; - - spin_lock(&dev->req_lock); - list_add(&req->list, &dev->tx_reqs); - spin_unlock(&dev->req_lock); - dev_kfree_skb_any(skb); - - atomic_dec(&dev->tx_qlen); - if (netif_carrier_ok(dev->net)) - netif_wake_queue(dev->net); -} - -static inline int is_promisc(u16 cdc_filter) -{ - return cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS; -} - -static netdev_tx_t eth_start_xmit(struct sk_buff *skb, - struct net_device *net) -{ - struct eth_dev *dev = netdev_priv(net); - int length = skb->len; - int retval; - struct usb_request *req = NULL; - unsigned long flags; - struct usb_ep *in; - u16 cdc_filter; - - spin_lock_irqsave(&dev->lock, flags); - if (dev->port_usb) { - in = dev->port_usb->in_ep; - cdc_filter = dev->port_usb->cdc_filter; - } else { - in = NULL; - cdc_filter = 0; - } - spin_unlock_irqrestore(&dev->lock, flags); - - if (!in) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - /* apply outgoing CDC or RNDIS filters */ - if (!is_promisc(cdc_filter)) { - u8 *dest = skb->data; - - if (is_multicast_ether_addr(dest)) { - u16 type; - - /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host - * SET_ETHERNET_MULTICAST_FILTERS requests - */ - if (is_broadcast_ether_addr(dest)) - type = USB_CDC_PACKET_TYPE_BROADCAST; - else - type = USB_CDC_PACKET_TYPE_ALL_MULTICAST; - if (!(cdc_filter & type)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - } - /* ignores USB_CDC_PACKET_TYPE_DIRECTED */ - } - - spin_lock_irqsave(&dev->req_lock, flags); - /* - * this freelist can be empty if an interrupt triggered disconnect() - * and reconfigured the gadget (shutting down this queue) after the - * network stack decided to xmit but before we got the spinlock. - */ - if (list_empty(&dev->tx_reqs)) { - spin_unlock_irqrestore(&dev->req_lock, flags); - return NETDEV_TX_BUSY; - } - - req = container_of(dev->tx_reqs.next, struct usb_request, list); - list_del(&req->list); - - /* temporarily stop TX queue when the freelist empties */ - if (list_empty(&dev->tx_reqs)) - netif_stop_queue(net); - spin_unlock_irqrestore(&dev->req_lock, flags); - - /* no buffer copies needed, unless the network stack did it - * or the hardware can't use skb buffers. - * or there's not enough space for extra headers we need - */ - if (dev->wrap) { - unsigned long flags; - - spin_lock_irqsave(&dev->lock, flags); - if (dev->port_usb) - skb = dev->wrap(dev->port_usb, skb); - spin_unlock_irqrestore(&dev->lock, flags); - if (!skb) - goto drop; - - length = skb->len; - } - req->buf = skb->data; - req->context = skb; - req->complete = tx_complete; - - /* NCM requires no zlp if transfer is dwNtbInMaxSize */ - if (dev->port_usb->is_fixed && - length == dev->port_usb->fixed_in_len && - (length % in->maxpacket) == 0) - req->zero = 0; - else - req->zero = 1; - - /* use zlp framing on tx for strict CDC-Ether conformance, - * though any robust network rx path ignores extra padding. - * and some hardware doesn't like to write zlps. - */ - if (req->zero && !dev->zlp && (length % in->maxpacket) == 0) - length++; - - req->length = length; - - /* throttle high/super speed IRQ rate back slightly */ - if (gadget_is_dualspeed(dev->gadget)) - req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH || - dev->gadget->speed == USB_SPEED_SUPER) - ? ((atomic_read(&dev->tx_qlen) % qmult) != 0) - : 0; - - retval = usb_ep_queue(in, req, GFP_ATOMIC); - switch (retval) { - default: - DBG(dev, "tx queue err %d\n", retval); - break; - case 0: - net->trans_start = jiffies; - atomic_inc(&dev->tx_qlen); - } - - if (retval) { - dev_kfree_skb_any(skb); -drop: - dev->net->stats.tx_dropped++; - spin_lock_irqsave(&dev->req_lock, flags); - if (list_empty(&dev->tx_reqs)) - netif_start_queue(net); - list_add(&req->list, &dev->tx_reqs); - spin_unlock_irqrestore(&dev->req_lock, flags); - } - return NETDEV_TX_OK; -} - -/*-------------------------------------------------------------------------*/ - -static void eth_start(struct eth_dev *dev, gfp_t gfp_flags) -{ - DBG(dev, "%s\n", __func__); - - /* fill the rx queue */ - rx_fill(dev, gfp_flags); - - /* and open the tx floodgates */ - atomic_set(&dev->tx_qlen, 0); - netif_wake_queue(dev->net); -} - -static int eth_open(struct net_device *net) -{ - struct eth_dev *dev = netdev_priv(net); - struct gether *link; - - DBG(dev, "%s\n", __func__); - if (netif_carrier_ok(dev->net)) - eth_start(dev, GFP_KERNEL); - - spin_lock_irq(&dev->lock); - link = dev->port_usb; - if (link && link->open) - link->open(link); - spin_unlock_irq(&dev->lock); - - return 0; -} - -static int eth_stop(struct net_device *net) -{ - struct eth_dev *dev = netdev_priv(net); - unsigned long flags; - - VDBG(dev, "%s\n", __func__); - netif_stop_queue(net); - - DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n", - dev->net->stats.rx_packets, dev->net->stats.tx_packets, - dev->net->stats.rx_errors, dev->net->stats.tx_errors - ); - - /* ensure there are no more active requests */ - spin_lock_irqsave(&dev->lock, flags); - if (dev->port_usb) { - struct gether *link = dev->port_usb; - - if (link->close) - link->close(link); - - /* NOTE: we have no abort-queue primitive we could use - * to cancel all pending I/O. Instead, we disable then - * reenable the endpoints ... this idiom may leave toggle - * wrong, but that's a self-correcting error. - * - * REVISIT: we *COULD* just let the transfers complete at - * their own pace; the network stack can handle old packets. - * For the moment we leave this here, since it works. - */ - usb_ep_disable(link->in_ep); - usb_ep_disable(link->out_ep); - if (netif_carrier_ok(net)) { - DBG(dev, "host still using in/out endpoints\n"); - usb_ep_enable(link->in_ep); - usb_ep_enable(link->out_ep); - } - } - spin_unlock_irqrestore(&dev->lock, flags); - - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */ -static char *dev_addr; -module_param(dev_addr, charp, S_IRUGO); -MODULE_PARM_DESC(dev_addr, "Device Ethernet Address"); - -/* this address is invisible to ifconfig */ -static char *host_addr; -module_param(host_addr, charp, S_IRUGO); -MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); - -static int get_ether_addr(const char *str, u8 *dev_addr) -{ - if (str) { - unsigned i; - - for (i = 0; i < 6; i++) { - unsigned char num; - - if ((*str == '.') || (*str == ':')) - str++; - num = hex_to_bin(*str++) << 4; - num |= hex_to_bin(*str++); - dev_addr [i] = num; - } - if (is_valid_ether_addr(dev_addr)) - return 0; - } - eth_random_addr(dev_addr); - return 1; -} - -static struct eth_dev *the_dev; - -static const struct net_device_ops eth_netdev_ops = { - .ndo_open = eth_open, - .ndo_stop = eth_stop, - .ndo_start_xmit = eth_start_xmit, - .ndo_change_mtu = ueth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static struct device_type gadget_type = { - .name = "gadget", -}; - -/** - * gether_setup_name - initialize one ethernet-over-usb link - * @g: gadget to associated with these links - * @ethaddr: NULL, or a buffer in which the ethernet address of the - * host side of the link is recorded - * @netname: name for network device (for example, "usb") - * Context: may sleep - * - * This sets up the single network link that may be exported by a - * gadget driver using this framework. The link layer addresses are - * set up using module parameters. - * - * Returns negative errno, or zero on success - */ -int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], - const char *netname) -{ - struct eth_dev *dev; - struct net_device *net; - int status; - - if (the_dev) - return -EBUSY; - - net = alloc_etherdev(sizeof *dev); - if (!net) - return -ENOMEM; - - dev = netdev_priv(net); - spin_lock_init(&dev->lock); - spin_lock_init(&dev->req_lock); - INIT_WORK(&dev->work, eth_work); - INIT_LIST_HEAD(&dev->tx_reqs); - INIT_LIST_HEAD(&dev->rx_reqs); - - skb_queue_head_init(&dev->rx_frames); - - /* network device setup */ - dev->net = net; - snprintf(net->name, sizeof(net->name), "%s%%d", netname); - - if (get_ether_addr(dev_addr, net->dev_addr)) - dev_warn(&g->dev, - "using random %s ethernet address\n", "self"); - if (get_ether_addr(host_addr, dev->host_mac)) - dev_warn(&g->dev, - "using random %s ethernet address\n", "host"); - - if (ethaddr) - memcpy(ethaddr, dev->host_mac, ETH_ALEN); - - net->netdev_ops = ð_netdev_ops; - - SET_ETHTOOL_OPS(net, &ops); - - dev->gadget = g; - SET_NETDEV_DEV(net, &g->dev); - SET_NETDEV_DEVTYPE(net, &gadget_type); - - status = register_netdev(net); - if (status < 0) { - dev_dbg(&g->dev, "register_netdev failed, %d\n", status); - free_netdev(net); - } else { - INFO(dev, "MAC %pM\n", net->dev_addr); - INFO(dev, "HOST MAC %pM\n", dev->host_mac); - - the_dev = dev; - - /* two kinds of host-initiated state changes: - * - iff DATA transfer is active, carrier is "on" - * - tx queueing enabled if open *and* carrier is "on" - */ - netif_carrier_off(net); - } - - return status; -} - -/** - * gether_cleanup - remove Ethernet-over-USB device - * Context: may sleep - * - * This is called to free all resources allocated by @gether_setup(). - */ -void gether_cleanup(void) -{ - if (!the_dev) - return; - - unregister_netdev(the_dev->net); - flush_work(&the_dev->work); - free_netdev(the_dev->net); - - the_dev = NULL; -} - - -/** - * gether_connect - notify network layer that USB link is active - * @link: the USB link, set up with endpoints, descriptors matching - * current device speed, and any framing wrapper(s) set up. - * Context: irqs blocked - * - * This is called to activate endpoints and let the network layer know - * the connection is active ("carrier detect"). It may cause the I/O - * queues to open and start letting network packets flow, but will in - * any case activate the endpoints so that they respond properly to the - * USB host. - * - * Verify net_device pointer returned using IS_ERR(). If it doesn't - * indicate some error code (negative errno), ep->driver_data values - * have been overwritten. - */ -struct net_device *gether_connect(struct gether *link) -{ - struct eth_dev *dev = the_dev; - int result = 0; - - if (!dev) - return ERR_PTR(-EINVAL); - - link->in_ep->driver_data = dev; - result = usb_ep_enable(link->in_ep); - if (result != 0) { - DBG(dev, "enable %s --> %d\n", - link->in_ep->name, result); - goto fail0; - } - - link->out_ep->driver_data = dev; - result = usb_ep_enable(link->out_ep); - if (result != 0) { - DBG(dev, "enable %s --> %d\n", - link->out_ep->name, result); - goto fail1; - } - - if (result == 0) - result = alloc_requests(dev, link, qlen(dev->gadget)); - - if (result == 0) { - dev->zlp = link->is_zlp_ok; - DBG(dev, "qlen %d\n", qlen(dev->gadget)); - - dev->header_len = link->header_len; - dev->unwrap = link->unwrap; - dev->wrap = link->wrap; - - spin_lock(&dev->lock); - dev->port_usb = link; - link->ioport = dev; - if (netif_running(dev->net)) { - if (link->open) - link->open(link); - } else { - if (link->close) - link->close(link); - } - spin_unlock(&dev->lock); - - netif_carrier_on(dev->net); - if (netif_running(dev->net)) - eth_start(dev, GFP_ATOMIC); - - /* on error, disable any endpoints */ - } else { - (void) usb_ep_disable(link->out_ep); -fail1: - (void) usb_ep_disable(link->in_ep); - } -fail0: - /* caller is responsible for cleanup on error */ - if (result < 0) - return ERR_PTR(result); - return dev->net; -} - -/** - * gether_disconnect - notify network layer that USB link is inactive - * @link: the USB link, on which gether_connect() was called - * Context: irqs blocked - * - * This is called to deactivate endpoints and let the network layer know - * the connection went inactive ("no carrier"). - * - * On return, the state is as if gether_connect() had never been called. - * The endpoints are inactive, and accordingly without active USB I/O. - * Pointers to endpoint descriptors and endpoint private data are nulled. - */ -void gether_disconnect(struct gether *link) -{ - struct eth_dev *dev = link->ioport; - struct usb_request *req; - - WARN_ON(!dev); - if (!dev) - return; - - DBG(dev, "%s\n", __func__); - - netif_stop_queue(dev->net); - netif_carrier_off(dev->net); - - /* disable endpoints, forcing (synchronous) completion - * of all pending i/o. then free the request objects - * and forget about the endpoints. - */ - usb_ep_disable(link->in_ep); - spin_lock(&dev->req_lock); - while (!list_empty(&dev->tx_reqs)) { - req = container_of(dev->tx_reqs.next, - struct usb_request, list); - list_del(&req->list); - - spin_unlock(&dev->req_lock); - usb_ep_free_request(link->in_ep, req); - spin_lock(&dev->req_lock); - } - spin_unlock(&dev->req_lock); - link->in_ep->driver_data = NULL; - link->in_ep->desc = NULL; - - usb_ep_disable(link->out_ep); - spin_lock(&dev->req_lock); - while (!list_empty(&dev->rx_reqs)) { - req = container_of(dev->rx_reqs.next, - struct usb_request, list); - list_del(&req->list); - - spin_unlock(&dev->req_lock); - usb_ep_free_request(link->out_ep, req); - spin_lock(&dev->req_lock); - } - spin_unlock(&dev->req_lock); - link->out_ep->driver_data = NULL; - link->out_ep->desc = NULL; - - /* finish forgetting about this USB link episode */ - dev->header_len = 0; - dev->unwrap = NULL; - dev->wrap = NULL; - - spin_lock(&dev->lock); - dev->port_usb = NULL; - link->ioport = NULL; - spin_unlock(&dev->lock); -} diff --git a/drivers/staging/ccg/u_ether.h b/drivers/staging/ccg/u_ether.h deleted file mode 100644 index 6f4a1623d85..00000000000 --- a/drivers/staging/ccg/u_ether.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * u_ether.h -- interface to USB gadget "ethernet link" utilities - * - * Copyright (C) 2003-2005,2008 David Brownell - * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger - * Copyright (C) 2008 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __U_ETHER_H -#define __U_ETHER_H - -#include -#include -#include -#include - -#include "gadget_chips.h" - - -/* - * This represents the USB side of an "ethernet" link, managed by a USB - * function which provides control and (maybe) framing. Two functions - * in different configurations could share the same ethernet link/netdev, - * using different host interaction models. - * - * There is a current limitation that only one instance of this link may - * be present in any given configuration. When that's a problem, network - * layer facilities can be used to package multiple logical links on this - * single "physical" one. - */ -struct gether { - struct usb_function func; - - /* updated by gether_{connect,disconnect} */ - struct eth_dev *ioport; - - /* endpoints handle full and/or high speeds */ - struct usb_ep *in_ep; - struct usb_ep *out_ep; - - bool is_zlp_ok; - - u16 cdc_filter; - - /* hooks for added framing, as needed for RNDIS and EEM. */ - u32 header_len; - /* NCM requires fixed size bundles */ - bool is_fixed; - u32 fixed_out_len; - u32 fixed_in_len; - struct sk_buff *(*wrap)(struct gether *port, - struct sk_buff *skb); - int (*unwrap)(struct gether *port, - struct sk_buff *skb, - struct sk_buff_head *list); - - /* called on network open/close */ - void (*open)(struct gether *); - void (*close)(struct gether *); -}; - -#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \ - |USB_CDC_PACKET_TYPE_ALL_MULTICAST \ - |USB_CDC_PACKET_TYPE_PROMISCUOUS \ - |USB_CDC_PACKET_TYPE_DIRECTED) - -/* variant of gether_setup that allows customizing network device name */ -int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], - const char *netname); - -/* netdev setup/teardown as directed by the gadget driver */ -/* gether_setup - initialize one ethernet-over-usb link - * @g: gadget to associated with these links - * @ethaddr: NULL, or a buffer in which the ethernet address of the - * host side of the link is recorded - * Context: may sleep - * - * This sets up the single network link that may be exported by a - * gadget driver using this framework. The link layer addresses are - * set up using module parameters. - * - * Returns negative errno, or zero on success - */ -static inline int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]) -{ - return gether_setup_name(g, ethaddr, "usb"); -} - -void gether_cleanup(void); - -/* connect/disconnect is handled by individual functions */ -struct net_device *gether_connect(struct gether *); -void gether_disconnect(struct gether *); - -/* Some controllers can't support CDC Ethernet (ECM) ... */ -static inline bool can_support_ecm(struct usb_gadget *gadget) -{ - if (!gadget_supports_altsettings(gadget)) - return false; - - /* Everything else is *presumably* fine ... but this is a bit - * chancy, so be **CERTAIN** there are no hardware issues with - * your controller. Add it above if it can't handle CDC. - */ - return true; -} - -/* each configuration may bind one instance of an ethernet link */ -int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); -int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); -int ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); -int eem_bind_config(struct usb_configuration *c); - -#ifdef USB_ETH_RNDIS - -int rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], - u32 vendorID, const char *manufacturer); - -#else - -static inline int -rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], - u32 vendorID, const char *manufacturer) -{ - return 0; -} - -#endif - -/** - * rndis_bind_config - add RNDIS network link to a configuration - * @c: the configuration to support the network link - * @ethaddr: a buffer in which the ethernet address of the host side - * side of the link was recorded - * Context: single threaded during gadget setup - * - * Returns zero on success, else negative errno. - * - * Caller must have called @gether_setup(). Caller is also responsible - * for calling @gether_cleanup() before module unload. - */ -static inline int rndis_bind_config(struct usb_configuration *c, - u8 ethaddr[ETH_ALEN]) -{ - return rndis_bind_config_vendor(c, ethaddr, 0, NULL); -} - - -#endif /* __U_ETHER_H */ diff --git a/drivers/staging/ccg/u_serial.c b/drivers/staging/ccg/u_serial.c deleted file mode 100644 index b10947ae0ac..00000000000 --- a/drivers/staging/ccg/u_serial.c +++ /dev/null @@ -1,1339 +0,0 @@ -/* - * u_serial.c - utilities for USB gadget "serial port"/TTY support - * - * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) - * Copyright (C) 2008 David Brownell - * Copyright (C) 2008 by Nokia Corporation - * - * This code also borrows from usbserial.c, which is - * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) - * Copyright (C) 2000 Peter Berger (pberger@brimson.com) - * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com) - * - * This software is distributed under the terms of the GNU General - * Public License ("GPL") as published by the Free Software Foundation, - * either version 2 of that License or (at your option) any later version. - */ - -/* #define VERBOSE_DEBUG */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "u_serial.h" - - -/* - * This component encapsulates the TTY layer glue needed to provide basic - * "serial port" functionality through the USB gadget stack. Each such - * port is exposed through a /dev/ttyGS* node. - * - * After initialization (gserial_setup), these TTY port devices stay - * available until they are removed (gserial_cleanup). Each one may be - * connected to a USB function (gserial_connect), or disconnected (with - * gserial_disconnect) when the USB host issues a config change event. - * Data can only flow when the port is connected to the host. - * - * A given TTY port can be made available in multiple configurations. - * For example, each one might expose a ttyGS0 node which provides a - * login application. In one case that might use CDC ACM interface 0, - * while another configuration might use interface 3 for that. The - * work to handle that (including descriptor management) is not part - * of this component. - * - * Configurations may expose more than one TTY port. For example, if - * ttyGS0 provides login service, then ttyGS1 might provide dialer access - * for a telephone or fax link. And ttyGS2 might be something that just - * needs a simple byte stream interface for some messaging protocol that - * is managed in userspace ... OBEX, PTP, and MTP have been mentioned. - */ - -#define PREFIX "ttyGS" - -/* - * gserial is the lifecycle interface, used by USB functions - * gs_port is the I/O nexus, used by the tty driver - * tty_struct links to the tty/filesystem framework - * - * gserial <---> gs_port ... links will be null when the USB link is - * inactive; managed by gserial_{connect,disconnect}(). each gserial - * instance can wrap its own USB control protocol. - * gserial->ioport == usb_ep->driver_data ... gs_port - * gs_port->port_usb ... gserial - * - * gs_port <---> tty_struct ... links will be null when the TTY file - * isn't opened; managed by gs_open()/gs_close() - * gserial->port_tty ... tty_struct - * tty_struct->driver_data ... gserial - */ - -/* RX and TX queues can buffer QUEUE_SIZE packets before they hit the - * next layer of buffering. For TX that's a circular buffer; for RX - * consider it a NOP. A third layer is provided by the TTY code. - */ -#define QUEUE_SIZE 16 -#define WRITE_BUF_SIZE 8192 /* TX only */ - -/* circular buffer */ -struct gs_buf { - unsigned buf_size; - char *buf_buf; - char *buf_get; - char *buf_put; -}; - -/* - * The port structure holds info for each port, one for each minor number - * (and thus for each /dev/ node). - */ -struct gs_port { - struct tty_port port; - spinlock_t port_lock; /* guard port_* access */ - - struct gserial *port_usb; - - bool openclose; /* open/close in progress */ - u8 port_num; - - struct list_head read_pool; - int read_started; - int read_allocated; - struct list_head read_queue; - unsigned n_read; - struct tasklet_struct push; - - struct list_head write_pool; - int write_started; - int write_allocated; - struct gs_buf port_write_buf; - wait_queue_head_t drain_wait; /* wait while writes drain */ - - /* REVISIT this state ... */ - struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */ -}; - -/* increase N_PORTS if you need more */ -#define N_PORTS 4 -static struct portmaster { - struct mutex lock; /* protect open/close */ - struct gs_port *port; -} ports[N_PORTS]; -static unsigned n_ports; - -#define GS_CLOSE_TIMEOUT 15 /* seconds */ - - - -#ifdef VERBOSE_DEBUG -#define pr_vdebug(fmt, arg...) \ - pr_debug(fmt, ##arg) -#else -#define pr_vdebug(fmt, arg...) \ - ({ if (0) pr_debug(fmt, ##arg); }) -#endif - -/*-------------------------------------------------------------------------*/ - -/* Circular Buffer */ - -/* - * gs_buf_alloc - * - * Allocate a circular buffer and all associated memory. - */ -static int gs_buf_alloc(struct gs_buf *gb, unsigned size) -{ - gb->buf_buf = kmalloc(size, GFP_KERNEL); - if (gb->buf_buf == NULL) - return -ENOMEM; - - gb->buf_size = size; - gb->buf_put = gb->buf_buf; - gb->buf_get = gb->buf_buf; - - return 0; -} - -/* - * gs_buf_free - * - * Free the buffer and all associated memory. - */ -static void gs_buf_free(struct gs_buf *gb) -{ - kfree(gb->buf_buf); - gb->buf_buf = NULL; -} - -/* - * gs_buf_clear - * - * Clear out all data in the circular buffer. - */ -static void gs_buf_clear(struct gs_buf *gb) -{ - gb->buf_get = gb->buf_put; - /* equivalent to a get of all data available */ -} - -/* - * gs_buf_data_avail - * - * Return the number of bytes of data written into the circular - * buffer. - */ -static unsigned gs_buf_data_avail(struct gs_buf *gb) -{ - return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size; -} - -/* - * gs_buf_space_avail - * - * Return the number of bytes of space available in the circular - * buffer. - */ -static unsigned gs_buf_space_avail(struct gs_buf *gb) -{ - return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size; -} - -/* - * gs_buf_put - * - * Copy data data from a user buffer and put it into the circular buffer. - * Restrict to the amount of space available. - * - * Return the number of bytes copied. - */ -static unsigned -gs_buf_put(struct gs_buf *gb, const char *buf, unsigned count) -{ - unsigned len; - - len = gs_buf_space_avail(gb); - if (count > len) - count = len; - - if (count == 0) - return 0; - - len = gb->buf_buf + gb->buf_size - gb->buf_put; - if (count > len) { - memcpy(gb->buf_put, buf, len); - memcpy(gb->buf_buf, buf+len, count - len); - gb->buf_put = gb->buf_buf + count - len; - } else { - memcpy(gb->buf_put, buf, count); - if (count < len) - gb->buf_put += count; - else /* count == len */ - gb->buf_put = gb->buf_buf; - } - - return count; -} - -/* - * gs_buf_get - * - * Get data from the circular buffer and copy to the given buffer. - * Restrict to the amount of data available. - * - * Return the number of bytes copied. - */ -static unsigned -gs_buf_get(struct gs_buf *gb, char *buf, unsigned count) -{ - unsigned len; - - len = gs_buf_data_avail(gb); - if (count > len) - count = len; - - if (count == 0) - return 0; - - len = gb->buf_buf + gb->buf_size - gb->buf_get; - if (count > len) { - memcpy(buf, gb->buf_get, len); - memcpy(buf+len, gb->buf_buf, count - len); - gb->buf_get = gb->buf_buf + count - len; - } else { - memcpy(buf, gb->buf_get, count); - if (count < len) - gb->buf_get += count; - else /* count == len */ - gb->buf_get = gb->buf_buf; - } - - return count; -} - -/*-------------------------------------------------------------------------*/ - -/* I/O glue between TTY (upper) and USB function (lower) driver layers */ - -/* - * gs_alloc_req - * - * Allocate a usb_request and its buffer. Returns a pointer to the - * usb_request or NULL if there is an error. - */ -struct usb_request * -gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags) -{ - struct usb_request *req; - - req = usb_ep_alloc_request(ep, kmalloc_flags); - - if (req != NULL) { - req->length = len; - req->buf = kmalloc(len, kmalloc_flags); - if (req->buf == NULL) { - usb_ep_free_request(ep, req); - return NULL; - } - } - - return req; -} - -/* - * gs_free_req - * - * Free a usb_request and its buffer. - */ -void gs_free_req(struct usb_ep *ep, struct usb_request *req) -{ - kfree(req->buf); - usb_ep_free_request(ep, req); -} - -/* - * gs_send_packet - * - * If there is data to send, a packet is built in the given - * buffer and the size is returned. If there is no data to - * send, 0 is returned. - * - * Called with port_lock held. - */ -static unsigned -gs_send_packet(struct gs_port *port, char *packet, unsigned size) -{ - unsigned len; - - len = gs_buf_data_avail(&port->port_write_buf); - if (len < size) - size = len; - if (size != 0) - size = gs_buf_get(&port->port_write_buf, packet, size); - return size; -} - -/* - * gs_start_tx - * - * This function finds available write requests, calls - * gs_send_packet to fill these packets with data, and - * continues until either there are no more write requests - * available or no more data to send. This function is - * run whenever data arrives or write requests are available. - * - * Context: caller owns port_lock; port_usb is non-null. - */ -static int gs_start_tx(struct gs_port *port) -/* -__releases(&port->port_lock) -__acquires(&port->port_lock) -*/ -{ - struct list_head *pool = &port->write_pool; - struct usb_ep *in = port->port_usb->in; - int status = 0; - bool do_tty_wake = false; - - while (!list_empty(pool)) { - struct usb_request *req; - int len; - - if (port->write_started >= QUEUE_SIZE) - break; - - req = list_entry(pool->next, struct usb_request, list); - len = gs_send_packet(port, req->buf, in->maxpacket); - if (len == 0) { - wake_up_interruptible(&port->drain_wait); - break; - } - do_tty_wake = true; - - req->length = len; - list_del(&req->list); - req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0); - - pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n", - port->port_num, len, *((u8 *)req->buf), - *((u8 *)req->buf+1), *((u8 *)req->buf+2)); - - /* Drop lock while we call out of driver; completions - * could be issued while we do so. Disconnection may - * happen too; maybe immediately before we queue this! - * - * NOTE that we may keep sending data for a while after - * the TTY closed (dev->ioport->port_tty is NULL). - */ - spin_unlock(&port->port_lock); - status = usb_ep_queue(in, req, GFP_ATOMIC); - spin_lock(&port->port_lock); - - if (status) { - pr_debug("%s: %s %s err %d\n", - __func__, "queue", in->name, status); - list_add(&req->list, pool); - break; - } - - port->write_started++; - - /* abort immediately after disconnect */ - if (!port->port_usb) - break; - } - - if (do_tty_wake && port->port.tty) - tty_wakeup(port->port.tty); - return status; -} - -/* - * Context: caller owns port_lock, and port_usb is set - */ -static unsigned gs_start_rx(struct gs_port *port) -/* -__releases(&port->port_lock) -__acquires(&port->port_lock) -*/ -{ - struct list_head *pool = &port->read_pool; - struct usb_ep *out = port->port_usb->out; - - while (!list_empty(pool)) { - struct usb_request *req; - int status; - struct tty_struct *tty; - - /* no more rx if closed */ - tty = port->port.tty; - if (!tty) - break; - - if (port->read_started >= QUEUE_SIZE) - break; - - req = list_entry(pool->next, struct usb_request, list); - list_del(&req->list); - req->length = out->maxpacket; - - /* drop lock while we call out; the controller driver - * may need to call us back (e.g. for disconnect) - */ - spin_unlock(&port->port_lock); - status = usb_ep_queue(out, req, GFP_ATOMIC); - spin_lock(&port->port_lock); - - if (status) { - pr_debug("%s: %s %s err %d\n", - __func__, "queue", out->name, status); - list_add(&req->list, pool); - break; - } - port->read_started++; - - /* abort immediately after disconnect */ - if (!port->port_usb) - break; - } - return port->read_started; -} - -/* - * RX tasklet takes data out of the RX queue and hands it up to the TTY - * layer until it refuses to take any more data (or is throttled back). - * Then it issues reads for any further data. - * - * If the RX queue becomes full enough that no usb_request is queued, - * the OUT endpoint may begin NAKing as soon as its FIFO fills up. - * So QUEUE_SIZE packets plus however many the FIFO holds (usually two) - * can be buffered before the TTY layer's buffers (currently 64 KB). - */ -static void gs_rx_push(unsigned long _port) -{ - struct gs_port *port = (void *)_port; - struct tty_struct *tty; - struct list_head *queue = &port->read_queue; - bool disconnect = false; - bool do_push = false; - - /* hand any queued data to the tty */ - spin_lock_irq(&port->port_lock); - tty = port->port.tty; - while (!list_empty(queue)) { - struct usb_request *req; - - req = list_first_entry(queue, struct usb_request, list); - - /* leave data queued if tty was rx throttled */ - if (tty && test_bit(TTY_THROTTLED, &tty->flags)) - break; - - switch (req->status) { - case -ESHUTDOWN: - disconnect = true; - pr_vdebug(PREFIX "%d: shutdown\n", port->port_num); - break; - - default: - /* presumably a transient fault */ - pr_warning(PREFIX "%d: unexpected RX status %d\n", - port->port_num, req->status); - /* FALLTHROUGH */ - case 0: - /* normal completion */ - break; - } - - /* push data to (open) tty */ - if (req->actual) { - char *packet = req->buf; - unsigned size = req->actual; - unsigned n; - int count; - - /* we may have pushed part of this packet already... */ - n = port->n_read; - if (n) { - packet += n; - size -= n; - } - - count = tty_insert_flip_string(&port->port, packet, size); - if (count) - do_push = true; - if (count != size) { - /* stop pushing; TTY layer can't handle more */ - port->n_read += count; - pr_vdebug(PREFIX "%d: rx block %d/%d\n", - port->port_num, - count, req->actual); - break; - } - port->n_read = 0; - } - list_move(&req->list, &port->read_pool); - port->read_started--; - } - - /* Push from tty to ldisc; without low_latency set this is handled by - * a workqueue, so we won't get callbacks and can hold port_lock - */ - if (do_push) - tty_flip_buffer_push(&port->port); - - - /* We want our data queue to become empty ASAP, keeping data - * in the tty and ldisc (not here). If we couldn't push any - * this time around, there may be trouble unless there's an - * implicit tty_unthrottle() call on its way... - * - * REVISIT we should probably add a timer to keep the tasklet - * from starving ... but it's not clear that case ever happens. - */ - if (!list_empty(queue) && tty) { - if (!test_bit(TTY_THROTTLED, &tty->flags)) { - if (do_push) - tasklet_schedule(&port->push); - else - pr_warning(PREFIX "%d: RX not scheduled?\n", - port->port_num); - } - } - - /* If we're still connected, refill the USB RX queue. */ - if (!disconnect && port->port_usb) - gs_start_rx(port); - - spin_unlock_irq(&port->port_lock); -} - -static void gs_read_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct gs_port *port = ep->driver_data; - - /* Queue all received data until the tty layer is ready for it. */ - spin_lock(&port->port_lock); - list_add_tail(&req->list, &port->read_queue); - tasklet_schedule(&port->push); - spin_unlock(&port->port_lock); -} - -static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct gs_port *port = ep->driver_data; - - spin_lock(&port->port_lock); - list_add(&req->list, &port->write_pool); - port->write_started--; - - switch (req->status) { - default: - /* presumably a transient fault */ - pr_warning("%s: unexpected %s status %d\n", - __func__, ep->name, req->status); - /* FALL THROUGH */ - case 0: - /* normal completion */ - gs_start_tx(port); - break; - - case -ESHUTDOWN: - /* disconnect */ - pr_vdebug("%s: %s shutdown\n", __func__, ep->name); - break; - } - - spin_unlock(&port->port_lock); -} - -static void gs_free_requests(struct usb_ep *ep, struct list_head *head, - int *allocated) -{ - struct usb_request *req; - - while (!list_empty(head)) { - req = list_entry(head->next, struct usb_request, list); - list_del(&req->list); - gs_free_req(ep, req); - if (allocated) - (*allocated)--; - } -} - -static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head, - void (*fn)(struct usb_ep *, struct usb_request *), - int *allocated) -{ - int i; - struct usb_request *req; - int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE; - - /* Pre-allocate up to QUEUE_SIZE transfers, but if we can't - * do quite that many this time, don't fail ... we just won't - * be as speedy as we might otherwise be. - */ - for (i = 0; i < n; i++) { - req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC); - if (!req) - return list_empty(head) ? -ENOMEM : 0; - req->complete = fn; - list_add_tail(&req->list, head); - if (allocated) - (*allocated)++; - } - return 0; -} - -/** - * gs_start_io - start USB I/O streams - * @dev: encapsulates endpoints to use - * Context: holding port_lock; port_tty and port_usb are non-null - * - * We only start I/O when something is connected to both sides of - * this port. If nothing is listening on the host side, we may - * be pointlessly filling up our TX buffers and FIFO. - */ -static int gs_start_io(struct gs_port *port) -{ - struct list_head *head = &port->read_pool; - struct usb_ep *ep = port->port_usb->out; - int status; - unsigned started; - - /* Allocate RX and TX I/O buffers. We can't easily do this much - * earlier (with GFP_KERNEL) because the requests are coupled to - * endpoints, as are the packet sizes we'll be using. Different - * configurations may use different endpoints with a given port; - * and high speed vs full speed changes packet sizes too. - */ - status = gs_alloc_requests(ep, head, gs_read_complete, - &port->read_allocated); - if (status) - return status; - - status = gs_alloc_requests(port->port_usb->in, &port->write_pool, - gs_write_complete, &port->write_allocated); - if (status) { - gs_free_requests(ep, head, &port->read_allocated); - return status; - } - - /* queue read requests */ - port->n_read = 0; - started = gs_start_rx(port); - - /* unblock any pending writes into our circular buffer */ - if (started) { - tty_wakeup(port->port.tty); - } else { - gs_free_requests(ep, head, &port->read_allocated); - gs_free_requests(port->port_usb->in, &port->write_pool, - &port->write_allocated); - status = -EIO; - } - - return status; -} - -/*-------------------------------------------------------------------------*/ - -/* TTY Driver */ - -/* - * gs_open sets up the link between a gs_port and its associated TTY. - * That link is broken *only* by TTY close(), and all driver methods - * know that. - */ -static int gs_open(struct tty_struct *tty, struct file *file) -{ - int port_num = tty->index; - struct gs_port *port; - int status; - - do { - mutex_lock(&ports[port_num].lock); - port = ports[port_num].port; - if (!port) - status = -ENODEV; - else { - spin_lock_irq(&port->port_lock); - - /* already open? Great. */ - if (port->port.count) { - status = 0; - port->port.count++; - - /* currently opening/closing? wait ... */ - } else if (port->openclose) { - status = -EBUSY; - - /* ... else we do the work */ - } else { - status = -EAGAIN; - port->openclose = true; - } - spin_unlock_irq(&port->port_lock); - } - mutex_unlock(&ports[port_num].lock); - - switch (status) { - default: - /* fully handled */ - return status; - case -EAGAIN: - /* must do the work */ - break; - case -EBUSY: - /* wait for EAGAIN task to finish */ - msleep(1); - /* REVISIT could have a waitchannel here, if - * concurrent open performance is important - */ - break; - } - } while (status != -EAGAIN); - - /* Do the "real open" */ - spin_lock_irq(&port->port_lock); - - /* allocate circular buffer on first open */ - if (port->port_write_buf.buf_buf == NULL) { - - spin_unlock_irq(&port->port_lock); - status = gs_buf_alloc(&port->port_write_buf, WRITE_BUF_SIZE); - spin_lock_irq(&port->port_lock); - - if (status) { - pr_debug("gs_open: ttyGS%d (%p,%p) no buffer\n", - port->port_num, tty, file); - port->openclose = false; - goto exit_unlock_port; - } - } - - /* REVISIT if REMOVED (ports[].port NULL), abort the open - * to let rmmod work faster (but this way isn't wrong). - */ - - /* REVISIT maybe wait for "carrier detect" */ - - tty->driver_data = port; - port->port.tty = tty; - - port->port.count = 1; - port->openclose = false; - - /* if connected, start the I/O stream */ - if (port->port_usb) { - struct gserial *gser = port->port_usb; - - pr_debug("gs_open: start ttyGS%d\n", port->port_num); - gs_start_io(port); - - if (gser->connect) - gser->connect(gser); - } - - pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file); - - status = 0; - -exit_unlock_port: - spin_unlock_irq(&port->port_lock); - return status; -} - -static int gs_writes_finished(struct gs_port *p) -{ - int cond; - - /* return true on disconnect or empty buffer */ - spin_lock_irq(&p->port_lock); - cond = (p->port_usb == NULL) || !gs_buf_data_avail(&p->port_write_buf); - spin_unlock_irq(&p->port_lock); - - return cond; -} - -static void gs_close(struct tty_struct *tty, struct file *file) -{ - struct gs_port *port = tty->driver_data; - struct gserial *gser; - - spin_lock_irq(&port->port_lock); - - if (port->port.count != 1) { - if (port->port.count == 0) - WARN_ON(1); - else - --port->port.count; - goto exit; - } - - pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file); - - /* mark port as closing but in use; we can drop port lock - * and sleep if necessary - */ - port->openclose = true; - port->port.count = 0; - - gser = port->port_usb; - if (gser && gser->disconnect) - gser->disconnect(gser); - - /* wait for circular write buffer to drain, disconnect, or at - * most GS_CLOSE_TIMEOUT seconds; then discard the rest - */ - if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) { - spin_unlock_irq(&port->port_lock); - wait_event_interruptible_timeout(port->drain_wait, - gs_writes_finished(port), - GS_CLOSE_TIMEOUT * HZ); - spin_lock_irq(&port->port_lock); - gser = port->port_usb; - } - - /* Iff we're disconnected, there can be no I/O in flight so it's - * ok to free the circular buffer; else just scrub it. And don't - * let the push tasklet fire again until we're re-opened. - */ - if (gser == NULL) - gs_buf_free(&port->port_write_buf); - else - gs_buf_clear(&port->port_write_buf); - - tty->driver_data = NULL; - port->port.tty = NULL; - - port->openclose = false; - - pr_debug("gs_close: ttyGS%d (%p,%p) done!\n", - port->port_num, tty, file); - - wake_up_interruptible(&port->port.close_wait); -exit: - spin_unlock_irq(&port->port_lock); -} - -static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - struct gs_port *port = tty->driver_data; - unsigned long flags; - int status; - - pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n", - port->port_num, tty, count); - - spin_lock_irqsave(&port->port_lock, flags); - if (count) - count = gs_buf_put(&port->port_write_buf, buf, count); - /* treat count == 0 as flush_chars() */ - if (port->port_usb) - status = gs_start_tx(port); - spin_unlock_irqrestore(&port->port_lock, flags); - - return count; -} - -static int gs_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct gs_port *port = tty->driver_data; - unsigned long flags; - int status; - - pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %pf\n", - port->port_num, tty, ch, __builtin_return_address(0)); - - spin_lock_irqsave(&port->port_lock, flags); - status = gs_buf_put(&port->port_write_buf, &ch, 1); - spin_unlock_irqrestore(&port->port_lock, flags); - - return status; -} - -static void gs_flush_chars(struct tty_struct *tty) -{ - struct gs_port *port = tty->driver_data; - unsigned long flags; - - pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty); - - spin_lock_irqsave(&port->port_lock, flags); - if (port->port_usb) - gs_start_tx(port); - spin_unlock_irqrestore(&port->port_lock, flags); -} - -static int gs_write_room(struct tty_struct *tty) -{ - struct gs_port *port = tty->driver_data; - unsigned long flags; - int room = 0; - - spin_lock_irqsave(&port->port_lock, flags); - if (port->port_usb) - room = gs_buf_space_avail(&port->port_write_buf); - spin_unlock_irqrestore(&port->port_lock, flags); - - pr_vdebug("gs_write_room: (%d,%p) room=%d\n", - port->port_num, tty, room); - - return room; -} - -static int gs_chars_in_buffer(struct tty_struct *tty) -{ - struct gs_port *port = tty->driver_data; - unsigned long flags; - int chars = 0; - - spin_lock_irqsave(&port->port_lock, flags); - chars = gs_buf_data_avail(&port->port_write_buf); - spin_unlock_irqrestore(&port->port_lock, flags); - - pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%d\n", - port->port_num, tty, chars); - - return chars; -} - -/* undo side effects of setting TTY_THROTTLED */ -static void gs_unthrottle(struct tty_struct *tty) -{ - struct gs_port *port = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&port->port_lock, flags); - if (port->port_usb) { - /* Kickstart read queue processing. We don't do xon/xoff, - * rts/cts, or other handshaking with the host, but if the - * read queue backs up enough we'll be NAKing OUT packets. - */ - tasklet_schedule(&port->push); - pr_vdebug(PREFIX "%d: unthrottle\n", port->port_num); - } - spin_unlock_irqrestore(&port->port_lock, flags); -} - -static int gs_break_ctl(struct tty_struct *tty, int duration) -{ - struct gs_port *port = tty->driver_data; - int status = 0; - struct gserial *gser; - - pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n", - port->port_num, duration); - - spin_lock_irq(&port->port_lock); - gser = port->port_usb; - if (gser && gser->send_break) - status = gser->send_break(gser, duration); - spin_unlock_irq(&port->port_lock); - - return status; -} - -static const struct tty_operations gs_tty_ops = { - .open = gs_open, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .chars_in_buffer = gs_chars_in_buffer, - .unthrottle = gs_unthrottle, - .break_ctl = gs_break_ctl, -}; - -/*-------------------------------------------------------------------------*/ - -static struct tty_driver *gs_tty_driver; - -static int -gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding) -{ - struct gs_port *port; - - port = kzalloc(sizeof(struct gs_port), GFP_KERNEL); - if (port == NULL) - return -ENOMEM; - - tty_port_init(&port->port); - spin_lock_init(&port->port_lock); - init_waitqueue_head(&port->drain_wait); - - tasklet_init(&port->push, gs_rx_push, (unsigned long) port); - - INIT_LIST_HEAD(&port->read_pool); - INIT_LIST_HEAD(&port->read_queue); - INIT_LIST_HEAD(&port->write_pool); - - port->port_num = port_num; - port->port_line_coding = *coding; - - ports[port_num].port = port; - - return 0; -} - -/** - * gserial_setup - initialize TTY driver for one or more ports - * @g: gadget to associate with these ports - * @count: how many ports to support - * Context: may sleep - * - * The TTY stack needs to know in advance how many devices it should - * plan to manage. Use this call to set up the ports you will be - * exporting through USB. Later, connect them to functions based - * on what configuration is activated by the USB host; and disconnect - * them as appropriate. - * - * An example would be a two-configuration device in which both - * configurations expose port 0, but through different functions. - * One configuration could even expose port 1 while the other - * one doesn't. - * - * Returns negative errno or zero. - */ -int gserial_setup(struct usb_gadget *g, unsigned count) -{ - unsigned i; - struct usb_cdc_line_coding coding; - int status; - - if (count == 0 || count > N_PORTS) - return -EINVAL; - - gs_tty_driver = alloc_tty_driver(count); - if (!gs_tty_driver) - return -ENOMEM; - - gs_tty_driver->driver_name = "g_serial"; - gs_tty_driver->name = PREFIX; - /* uses dynamically assigned dev_t values */ - - gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; - gs_tty_driver->subtype = SERIAL_TYPE_NORMAL; - gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - gs_tty_driver->init_termios = tty_std_termios; - - /* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on - * MS-Windows. Otherwise, most of these flags shouldn't affect - * anything unless we were to actually hook up to a serial line. - */ - gs_tty_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - gs_tty_driver->init_termios.c_ispeed = 9600; - gs_tty_driver->init_termios.c_ospeed = 9600; - - coding.dwDTERate = cpu_to_le32(9600); - coding.bCharFormat = 8; - coding.bParityType = USB_CDC_NO_PARITY; - coding.bDataBits = USB_CDC_1_STOP_BITS; - - tty_set_operations(gs_tty_driver, &gs_tty_ops); - - /* make devices be openable */ - for (i = 0; i < count; i++) { - mutex_init(&ports[i].lock); - status = gs_port_alloc(i, &coding); - if (status) { - count = i; - goto fail; - } - } - n_ports = count; - - /* export the driver ... */ - status = tty_register_driver(gs_tty_driver); - if (status) { - pr_err("%s: cannot register, err %d\n", - __func__, status); - goto fail; - } - - /* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */ - for (i = 0; i < count; i++) { - struct device *tty_dev; - - tty_dev = tty_register_device(gs_tty_driver, i, &g->dev); - if (IS_ERR(tty_dev)) - pr_warning("%s: no classdev for port %d, err %ld\n", - __func__, i, PTR_ERR(tty_dev)); - } - - pr_debug("%s: registered %d ttyGS* device%s\n", __func__, - count, (count == 1) ? "" : "s"); - - return status; -fail: - while (count--) { - tty_port_destroy(&ports[count].port->port); - kfree(ports[count].port); - } - put_tty_driver(gs_tty_driver); - gs_tty_driver = NULL; - return status; -} - -static int gs_closed(struct gs_port *port) -{ - int cond; - - spin_lock_irq(&port->port_lock); - cond = (port->port.count == 0) && !port->openclose; - spin_unlock_irq(&port->port_lock); - return cond; -} - -/** - * gserial_cleanup - remove TTY-over-USB driver and devices - * Context: may sleep - * - * This is called to free all resources allocated by @gserial_setup(). - * Accordingly, it may need to wait until some open /dev/ files have - * closed. - * - * The caller must have issued @gserial_disconnect() for any ports - * that had previously been connected, so that there is never any - * I/O pending when it's called. - */ -void gserial_cleanup(void) -{ - unsigned i; - struct gs_port *port; - - if (!gs_tty_driver) - return; - - /* start sysfs and /dev/ttyGS* node removal */ - for (i = 0; i < n_ports; i++) - tty_unregister_device(gs_tty_driver, i); - - for (i = 0; i < n_ports; i++) { - /* prevent new opens */ - mutex_lock(&ports[i].lock); - port = ports[i].port; - ports[i].port = NULL; - mutex_unlock(&ports[i].lock); - - tasklet_kill(&port->push); - - /* wait for old opens to finish */ - wait_event(port->port.close_wait, gs_closed(port)); - - WARN_ON(port->port_usb != NULL); - - tty_port_destroy(&port->port); - kfree(port); - } - n_ports = 0; - - tty_unregister_driver(gs_tty_driver); - put_tty_driver(gs_tty_driver); - gs_tty_driver = NULL; - - pr_debug("%s: cleaned up ttyGS* support\n", __func__); -} - -/** - * gserial_connect - notify TTY I/O glue that USB link is active - * @gser: the function, set up with endpoints and descriptors - * @port_num: which port is active - * Context: any (usually from irq) - * - * This is called activate endpoints and let the TTY layer know that - * the connection is active ... not unlike "carrier detect". It won't - * necessarily start I/O queues; unless the TTY is held open by any - * task, there would be no point. However, the endpoints will be - * activated so the USB host can perform I/O, subject to basic USB - * hardware flow control. - * - * Caller needs to have set up the endpoints and USB function in @dev - * before calling this, as well as the appropriate (speed-specific) - * endpoint descriptors, and also have set up the TTY driver by calling - * @gserial_setup(). - * - * Returns negative errno or zero. - * On success, ep->driver_data will be overwritten. - */ -int gserial_connect(struct gserial *gser, u8 port_num) -{ - struct gs_port *port; - unsigned long flags; - int status; - - if (!gs_tty_driver || port_num >= n_ports) - return -ENXIO; - - /* we "know" gserial_cleanup() hasn't been called */ - port = ports[port_num].port; - - /* activate the endpoints */ - status = usb_ep_enable(gser->in); - if (status < 0) - return status; - gser->in->driver_data = port; - - status = usb_ep_enable(gser->out); - if (status < 0) - goto fail_out; - gser->out->driver_data = port; - - /* then tell the tty glue that I/O can work */ - spin_lock_irqsave(&port->port_lock, flags); - gser->ioport = port; - port->port_usb = gser; - - /* REVISIT unclear how best to handle this state... - * we don't really couple it with the Linux TTY. - */ - gser->port_line_coding = port->port_line_coding; - - /* REVISIT if waiting on "carrier detect", signal. */ - - /* if it's already open, start I/O ... and notify the serial - * protocol about open/close status (connect/disconnect). - */ - if (port->port.count) { - pr_debug("gserial_connect: start ttyGS%d\n", port->port_num); - gs_start_io(port); - if (gser->connect) - gser->connect(gser); - } else { - if (gser->disconnect) - gser->disconnect(gser); - } - - spin_unlock_irqrestore(&port->port_lock, flags); - - return status; - -fail_out: - usb_ep_disable(gser->in); - gser->in->driver_data = NULL; - return status; -} - -/** - * gserial_disconnect - notify TTY I/O glue that USB link is inactive - * @gser: the function, on which gserial_connect() was called - * Context: any (usually from irq) - * - * This is called to deactivate endpoints and let the TTY layer know - * that the connection went inactive ... not unlike "hangup". - * - * On return, the state is as if gserial_connect() had never been called; - * there is no active USB I/O on these endpoints. - */ -void gserial_disconnect(struct gserial *gser) -{ - struct gs_port *port = gser->ioport; - unsigned long flags; - - if (!port) - return; - - /* tell the TTY glue not to do I/O here any more */ - spin_lock_irqsave(&port->port_lock, flags); - - /* REVISIT as above: how best to track this? */ - port->port_line_coding = gser->port_line_coding; - - port->port_usb = NULL; - gser->ioport = NULL; - if (port->port.count > 0 || port->openclose) { - wake_up_interruptible(&port->drain_wait); - if (port->port.tty) - tty_hangup(port->port.tty); - } - spin_unlock_irqrestore(&port->port_lock, flags); - - /* disable endpoints, aborting down any active I/O */ - usb_ep_disable(gser->out); - gser->out->driver_data = NULL; - - usb_ep_disable(gser->in); - gser->in->driver_data = NULL; - - /* finally, free any unused/unusable I/O buffers */ - spin_lock_irqsave(&port->port_lock, flags); - if (port->port.count == 0 && !port->openclose) - gs_buf_free(&port->port_write_buf); - gs_free_requests(gser->out, &port->read_pool, NULL); - gs_free_requests(gser->out, &port->read_queue, NULL); - gs_free_requests(gser->in, &port->write_pool, NULL); - - port->read_allocated = port->read_started = - port->write_allocated = port->write_started = 0; - - spin_unlock_irqrestore(&port->port_lock, flags); -} diff --git a/drivers/staging/ccg/u_serial.h b/drivers/staging/ccg/u_serial.h deleted file mode 100644 index 9b0fe6450fb..00000000000 --- a/drivers/staging/ccg/u_serial.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * u_serial.h - interface to USB gadget "serial port"/TTY utilities - * - * Copyright (C) 2008 David Brownell - * Copyright (C) 2008 by Nokia Corporation - * - * This software is distributed under the terms of the GNU General - * Public License ("GPL") as published by the Free Software Foundation, - * either version 2 of that License or (at your option) any later version. - */ - -#ifndef __U_SERIAL_H -#define __U_SERIAL_H - -#include -#include - -/* - * One non-multiplexed "serial" I/O port ... there can be several of these - * on any given USB peripheral device, if it provides enough endpoints. - * - * The "u_serial" utility component exists to do one thing: manage TTY - * style I/O using the USB peripheral endpoints listed here, including - * hookups to sysfs and /dev for each logical "tty" device. - * - * REVISIT at least ACM could support tiocmget() if needed. - * - * REVISIT someday, allow multiplexing several TTYs over these endpoints. - */ -struct gserial { - struct usb_function func; - - /* port is managed by gserial_{connect,disconnect} */ - struct gs_port *ioport; - - struct usb_ep *in; - struct usb_ep *out; - - /* REVISIT avoid this CDC-ACM support harder ... */ - struct usb_cdc_line_coding port_line_coding; /* 9600-8-N-1 etc */ - - /* notification callbacks */ - void (*connect)(struct gserial *p); - void (*disconnect)(struct gserial *p); - int (*send_break)(struct gserial *p, int duration); -}; - -/* utilities to allocate/free request and buffer */ -struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags); -void gs_free_req(struct usb_ep *, struct usb_request *req); - -/* port setup/teardown is handled by gadget driver */ -int gserial_setup(struct usb_gadget *g, unsigned n_ports); -void gserial_cleanup(void); - -/* connect/disconnect is handled by individual functions */ -int gserial_connect(struct gserial *, u8 port_num); -void gserial_disconnect(struct gserial *); - -/* functions are bound to configurations by a config or gadget driver */ -int acm_bind_config(struct usb_configuration *c, u8 port_num); -int gser_bind_config(struct usb_configuration *c, u8 port_num); -int obex_bind_config(struct usb_configuration *c, u8 port_num); - -#endif /* __U_SERIAL_H */ diff --git a/drivers/staging/ccg/usbstring.c b/drivers/staging/ccg/usbstring.c deleted file mode 100644 index 4d25b9009ed..00000000000 --- a/drivers/staging/ccg/usbstring.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright (C) 2003 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as published - * by the Free Software Foundation; either version 2.1 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - - -/** - * usb_gadget_get_string - fill out a string descriptor - * @table: of c strings encoded using UTF-8 - * @id: string id, from low byte of wValue in get string descriptor - * @buf: at least 256 bytes, must be 16-bit aligned - * - * Finds the UTF-8 string matching the ID, and converts it into a - * string descriptor in utf16-le. - * Returns length of descriptor (always even) or negative errno - * - * If your driver needs stings in multiple languages, you'll probably - * "switch (wIndex) { ... }" in your ep0 string descriptor logic, - * using this routine after choosing which set of UTF-8 strings to use. - * Note that US-ASCII is a strict subset of UTF-8; any string bytes with - * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 - * characters (which are also widely used in C strings). - */ -int -usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) -{ - struct usb_string *s; - int len; - - /* descriptor 0 has the language id */ - if (id == 0) { - buf [0] = 4; - buf [1] = USB_DT_STRING; - buf [2] = (u8) table->language; - buf [3] = (u8) (table->language >> 8); - return 4; - } - for (s = table->strings; s && s->s; s++) - if (s->id == id) - break; - - /* unrecognized: stall. */ - if (!s || !s->s) - return -EINVAL; - - /* string descriptors have length, tag, then UTF16-LE text */ - len = min ((size_t) 126, strlen (s->s)); - len = utf8s_to_utf16s(s->s, len, UTF16_LITTLE_ENDIAN, - (wchar_t *) &buf[2], 126); - if (len < 0) - return -EINVAL; - buf [0] = (len + 1) * 2; - buf [1] = USB_DT_STRING; - return buf [0]; -} - -- 2.41.0