From 497af1f3fb221e82015658eebbe1b961346f1f8a Mon Sep 17 00:00:00 2001 From: Zumeng Chen Date: Wed, 20 Jun 2012 17:14:50 +0800 Subject: [PATCH] ARM: OMAP3EVM: Adding USB internal LDOs board file EHCI PHY requires these regulators: EVM Rev >=E --> VAUX2 EVM Rev < E --> VUSB1V5, VUSB1V8 Adding USB internal LDOs (vusb1v5 & vusb1v8) and VAUX2 to omap3evm board file. Also removing vaux2_{1/2/3} supplies as they are not used on omap3 evm. But we need not to add vaux2 in twl4030_platform_data since it will be added conditionally. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Vaibhav Hiremath Signed-off-by: Zumeng Chen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3evm.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 0b83d0e7e72..1bfbe42bbed 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -466,6 +466,28 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { }; #endif +/* VAUX2 for USB */ +static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { + REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ + REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ + REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vaux2", NULL), +}; + +static struct regulator_init_data omap3evm_vaux2 = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vaux2_supplies), + .consumer_supplies = omap3evm_vaux2_supplies, +}; + static struct twl4030_platform_data omap3evm_twldata = { /* platform_data for children goes here */ .keypad = &omap3evm_kp_data, @@ -659,6 +681,9 @@ static void __init omap3_evm_init(void) omap_mux_init_gpio(63, OMAP_PIN_INPUT); omap_hsmmc_init(mmc); + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) + omap3evm_twldata.vaux2 = &omap3evm_vaux2; + omap3_evm_i2c_init(); omap_display_init(&omap3_evm_dss_data); -- 2.46.0