From 4489a5712b086621a6c3f669057d2996245cd3fb Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 27 Apr 2006 15:54:22 -0400 Subject: [PATCH] [PATCH] USB: usbcore: always turn on hub port power Some hubs claim not to support port-power switching, and right now the hub driver believes them and does not enable power to their ports. However it turns out that even though they don't actually switch power, they do ignore all events on a port until told to turn on the power! This problem has been reported by several users. This revised patch (as672b) makes the hub driver always try to turn on port power to all hubs, regardless of what the hub descriptor says. It also adds a comment explaining the need for this. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 90b8d43c6b3..1b1846e6473 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -432,15 +432,22 @@ static void hub_power_on(struct usb_hub *hub) { int port1; unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2; - u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); - - /* if hub supports power switching, enable power on each port */ - if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2) { + u16 wHubCharacteristics = + le16_to_cpu(hub->descriptor->wHubCharacteristics); + + /* Enable power on each port. Some hubs have reserved values + * of LPSM (> 2) in their descriptors, even though they are + * USB 2.0 hubs. Some hubs do not implement port-power switching + * but only emulate it. In all cases, the ports won't work + * unless we send these messages to the hub. + */ + if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2) dev_dbg(hub->intfdev, "enabling power on all ports\n"); - for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++) - set_port_feature(hub->hdev, port1, - USB_PORT_FEAT_POWER); - } + else + dev_dbg(hub->intfdev, "trying to enable port power on " + "non-switchable hub\n"); + for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++) + set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER); /* Wait at least 100 msec for power to become stable */ msleep(max(pgood_delay, (unsigned) 100)); -- 2.46.0