From 3735ba8db8e6ea22ad3ff524328926d8d780a884 Mon Sep 17 00:00:00 2001 From: Shengzhou Liu Date: Wed, 22 Aug 2012 18:17:00 +0800 Subject: [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock when missing USB PHY clock, kernel booting up will hang during USB initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid CPU hanging in this case. Signed-off-by: Shengzhou Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 58 +++++++++++++++++++++++++------------ drivers/usb/host/ehci-fsl.h | 1 + include/linux/fsl_devices.h | 1 + 3 files changed, 42 insertions(+), 18 deletions(-) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index b7451b29c5a..11ff4b4dc7a 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -210,11 +210,11 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, usb_put_hcd(hcd); } -static void ehci_fsl_setup_phy(struct usb_hcd *hcd, +static int ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) { - u32 portsc, temp; + u32 portsc; struct ehci_hcd *ehci = hcd_to_ehci(hcd); void __iomem *non_ehci = hcd->regs; struct device *dev = hcd->self.controller; @@ -232,9 +232,15 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_ULPI: if (pdata->controller_ver) { /* controller version 1.6 or above */ - temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); - out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | - USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL); + setbits32(non_ehci + FSL_SOC_USB_CTRL, + ULPI_PHY_CLK_SEL); + /* + * Due to controller issue of PHY_CLK_VALID in ULPI + * mode, we set USB_CTRL_USB_EN before checking + * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work. + */ + clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, + UTMI_PHY_EN, USB_CTRL_USB_EN); } portsc |= PORT_PTS_ULPI; break; @@ -247,9 +253,7 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_UTMI: if (pdata->controller_ver) { /* controller version 1.6 or above */ - temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); - out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | - UTMI_PHY_EN | USB_CTRL_USB_EN); + setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to become stable - 10ms*/ } @@ -262,23 +266,34 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_NONE: break; } + + if ((pdata->controller_ver) && ((phy_mode == FSL_USB2_PHY_ULPI) || + (phy_mode == FSL_USB2_PHY_UTMI))) { + /* check PHY_CLK_VALID to get phy clk valid */ + if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & + PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) { + printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n"); + return -EINVAL; + } + } + ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); + + if (phy_mode != FSL_USB2_PHY_ULPI) + setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN); + + return 0; } -static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) +static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) { struct usb_hcd *hcd = ehci_to_hcd(ehci); struct fsl_usb2_platform_data *pdata; void __iomem *non_ehci = hcd->regs; - u32 temp; pdata = hcd->self.controller->platform_data; - /* Enable PHY interface in the control reg. */ if (pdata->have_sysif_regs) { - temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); - out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004); - /* * Turn on cache snooping hardware, since some PowerPC platforms * wholly rely on hardware to deal with cache coherent @@ -293,7 +308,8 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) if ((pdata->operating_mode == FSL_USB2_DR_HOST) || (pdata->operating_mode == FSL_USB2_DR_OTG)) - ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) + return -EINVAL; if (pdata->operating_mode == FSL_USB2_MPH_HOST) { unsigned int chip, rev, svr; @@ -307,9 +323,12 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) ehci->has_fsl_port_bug = 1; if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) - ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) + return -EINVAL; + if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) - ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1); + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1)) + return -EINVAL; } if (pdata->have_sysif_regs) { @@ -322,12 +341,15 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) #endif out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001); } + + return 0; } /* called after powerup, by probe or system-pm "wakeup" */ static int ehci_fsl_reinit(struct ehci_hcd *ehci) { - ehci_fsl_usb_setup(ehci); + if (ehci_fsl_usb_setup(ehci)) + return -EINVAL; ehci_port_power(ehci, 0); return 0; diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 88403684d10..dbd292e9f0a 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -61,4 +61,5 @@ #define PLL_RESET (1<<8) #define UTMI_PHY_EN (1<<9) #define ULPI_PHY_CLK_SEL (1<<10) +#define PHY_CLK_VALID (1<<17) #endif /* _EHCI_FSL_H */ diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 15be561e739..ccfc4bb3dc4 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -19,6 +19,7 @@ #define FSL_UTMI_PHY_DLY 10 /*As per P1010RM, delay for UTMI PHY CLK to become stable - 10ms*/ +#define FSL_USB_PHY_CLK_TIMEOUT 1000 /* uSec */ #define FSL_USB_VER_OLD 0 #define FSL_USB_VER_1_6 1 #define FSL_USB_VER_2_2 2 -- 2.46.0