From 36efec48e2e6016e05364906720a0ec350a5d768 Mon Sep 17 00:00:00 2001 From: Matthias Schwarzott Date: Tue, 22 Jul 2014 17:12:13 -0300 Subject: [PATCH] [media] cx23885: Add si2165 support for HVR-5500 The same card entry is used for HVR-4400 and HVR-5500. Only HVR-5500 has been tested. Signed-off-by: Matthias Schwarzott Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/cx23885/Kconfig | 1 + drivers/media/pci/cx23885/cx23885-cards.c | 17 +++++++-- drivers/media/pci/cx23885/cx23885-dvb.c | 43 ++++++++++++++++++++--- 3 files changed, 53 insertions(+), 8 deletions(-) diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig index 5158133c653..e12c006e6e2 100644 --- a/drivers/media/pci/cx23885/Kconfig +++ b/drivers/media/pci/cx23885/Kconfig @@ -31,6 +31,7 @@ config VIDEO_CX23885 select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT + select DVB_SI2165 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 1d1550a8116..c2b60800719 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -619,7 +619,12 @@ struct cx23885_board cx23885_boards[] = { }, [CX23885_BOARD_HAUPPAUGE_HVR4400] = { .name = "Hauppauge WinTV-HVR4400", + .porta = CX23885_ANALOG_VIDEO, .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_NXP_TDA18271, + .tuner_addr = 0x60, /* 0xc0 >> 1 */ + .tuner_bus = 1, }, [CX23885_BOARD_AVERMEDIA_HC81R] = { .name = "AVerTV Hybrid Express Slim HC81R", @@ -1486,13 +1491,16 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) break; case CX23885_BOARD_HAUPPAUGE_HVR4400: /* GPIO-8 tda10071 demod reset */ + /* GPIO-9 si2165 demod reset */ /* Put the parts into reset and back */ - cx23885_gpio_enable(dev, GPIO_8, 1); - cx23885_gpio_clear(dev, GPIO_8); + cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1); + + cx23885_gpio_clear(dev, GPIO_8 | GPIO_9); mdelay(100); - cx23885_gpio_set(dev, GPIO_8); + cx23885_gpio_set(dev, GPIO_8 | GPIO_9); mdelay(100); + break; case CX23885_BOARD_AVERMEDIA_HC81R: cx_clear(MC417_CTL, 1); @@ -1839,6 +1847,9 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1500: diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c index 6968706b83b..968fecc32f9 100644 --- a/drivers/media/pci/cx23885/cx23885-dvb.c +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -72,6 +72,7 @@ #include "tda10071.h" #include "a8293.h" #include "mb86a20s.h" +#include "si2165.h" static unsigned int debug; @@ -303,6 +304,11 @@ static struct tda18271_config hauppauge_hvr1210_tuner_config = { .output_opt = TDA18271_OUTPUT_LT_OFF, }; +static struct tda18271_config hauppauge_hvr4400_tuner_config = { + .gate = TDA18271_GATE_DIGITAL, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + static struct tda18271_std_map hauppauge_hvr127x_std_map = { .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, .if_lvl = 1, .rfagc_top = 0x58 }, @@ -703,6 +709,12 @@ static const struct a8293_config hauppauge_a8293_config = { .i2c_addr = 0x0b, }; +static const struct si2165_config hauppauge_hvr4400_si2165_config = { + .i2c_addr = 0x64, + .chip_mode = SI2165_MODE_PLL_XTAL, + .ref_freq_Hz = 16000000, +}; + static int netup_altera_fpga_rw(void *device, int flag, int data, int read) { struct cx23885_dev *dev = (struct cx23885_dev *)device; @@ -1459,13 +1471,34 @@ static int dvb_register(struct cx23885_tsport *port) break; case CX23885_BOARD_HAUPPAUGE_HVR4400: i2c_bus = &dev->i2c_bus[0]; - fe0->dvb.frontend = dvb_attach(tda10071_attach, + i2c_bus2 = &dev->i2c_bus[1]; + switch (port->nr) { + /* port b */ + case 1: + fe0->dvb.frontend = dvb_attach(tda10071_attach, &hauppauge_tda10071_config, &i2c_bus->i2c_adap); - if (fe0->dvb.frontend != NULL) { - dvb_attach(a8293_attach, fe0->dvb.frontend, - &i2c_bus->i2c_adap, - &hauppauge_a8293_config); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(a8293_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_a8293_config)) + goto frontend_detach; + } + break; + /* port c */ + case 2: + fe0->dvb.frontend = dvb_attach(si2165_attach, + &hauppauge_hvr4400_si2165_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + fe0->dvb.frontend->ops.i2c_gate_ctrl = 0; + if (!dvb_attach(tda18271_attach, + fe0->dvb.frontend, + 0x60, &i2c_bus2->i2c_adap, + &hauppauge_hvr4400_tuner_config)) + goto frontend_detach; + } + break; } break; default: -- 2.41.0