From 32a7ede673cd0be580f24d855099a8a5f195e80c Mon Sep 17 00:00:00 2001 From: "Steven J. Hill" Date: Thu, 3 Jan 2013 19:01:52 +0000 Subject: [PATCH] MIPS: dsp: Add assembler support for DSP ASEs. Newer toolchains support the DSP and DSP Rev2 instructions. This patch performs a check for that support and adds compiler and assembler flags for only the files that need use those instructions. Signed-off-by: Steven J. Hill Acked-by: Florian Fainelli Patchwork: http://patchwork.linux-mips.org/patch/4752/ Signed-off-by: John Crispin --- arch/mips/include/asm/mipsregs.h | 53 ++++++++++++++++++++++---------- arch/mips/kernel/Makefile | 31 +++++++++++++++++++ 2 files changed, 67 insertions(+), 17 deletions(-) diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 3e36745670b..578132219ff 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1155,36 +1155,26 @@ do { \ : "=r" (__res)); \ __res;}) +#ifdef HAVE_AS_DSP #define rddsp(mask) \ ({ \ - unsigned int __res; \ + unsigned int __dspctl; \ \ __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # rddsp $1, %x1 \n" \ - " .word 0x7c000cb8 | (%x1 << 16) \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__res) \ + " rddsp %0, %x1 \n" \ + : "=r" (__dspctl) \ : "i" (mask)); \ - __res; \ + __dspctl; \ }) #define wrdsp(val, mask) \ do { \ __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # wrdsp $1, %x1 \n" \ - " .word 0x7c2004f8 | (%x1 << 11) \n" \ - " .set pop \n" \ - : \ + " wrdsp %0, %x1 \n" \ + : \ : "r" (val), "i" (mask)); \ } while (0) -#if 0 /* Need DSP ASE capable assembler ... */ #define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;}) #define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;}) #define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;}) @@ -1207,6 +1197,35 @@ do { \ #else +#define rddsp(mask) \ +({ \ + unsigned int __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # rddsp $1, %x1 \n" \ + " .word 0x7c000cb8 | (%x1 << 16) \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res) \ + : "i" (mask)); \ + __res; \ +}) + +#define wrdsp(val, mask) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # wrdsp $1, %x1 \n" \ + " .word 0x7c2004f8 | (%x1 << 11) \n" \ + " .set pop \n" \ + : \ + : "r" (val), "i" (mask)); \ +} while (0) + #define mfhi0() \ ({ \ unsigned long __treg; \ diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 007c33d7371..6c17e1f3d0e 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -98,4 +98,35 @@ obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o obj-$(CONFIG_JUMP_LABEL) += jump_label.o +# +# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe +# to enable DSP assembler support here even if the MIPS Release 2 CPU we +# are targetting does not support DSP because all code-paths making use of +# it properly check that the running CPU *actually does* support these +# instructions. +# +ifeq ($(CONFIG_CPU_MIPSR2), y) +CFLAGS_DSP = -DHAVE_AS_DSP + +# +# Check if assembler supports DSP ASE +# +ifeq ($(call cc-option-yn,-mdsp), y) +CFLAGS_DSP += -mdsp +endif + +# +# Check if assembler supports DSP ASE Rev2 +# +ifeq ($(call cc-option-yn,-mdspr2), y) +CFLAGS_DSP += -mdspr2 +endif + +CFLAGS_signal.o = $(CFLAGS_DSP) +CFLAGS_signal32.o = $(CFLAGS_DSP) +CFLAGS_process.o = $(CFLAGS_DSP) +CFLAGS_branch.o = $(CFLAGS_DSP) +CFLAGS_ptrace.o = $(CFLAGS_DSP) +endif + CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS) -- 2.46.0