From 294440887b32c58d220fb54b73b7a58079b78f20 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 22 Apr 2010 20:03:35 +0400 Subject: [PATCH] libata-sff: kill unused ata_bus_reset() ... since I see no callers of it. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- Documentation/DocBook/libata.tmpl | 6 +- drivers/ata/libata-sff.c | 94 ------------------------------- include/linux/libata.h | 1 - 3 files changed, 2 insertions(+), 99 deletions(-) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index ff3e5bec1c2..70b811e9f2c 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -81,16 +81,14 @@ void (*port_disable) (struct ata_port *); - Called from ata_bus_probe() and ata_bus_reset() error paths, - as well as when unregistering from the SCSI module (rmmod, hot - unplug). + Called from ata_bus_probe() error path, as well as when + unregistering from the SCSI module (rmmod, hot unplug). This function should do whatever needs to be done to take the port out of use. In most cases, ata_port_disable() can be used as this hook. Called from ata_bus_probe() on a failed probe. - Called from ata_bus_reset() on a failed bus reset. Called from ata_scsi_release(). diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index e3877b6843c..b31389605be 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2631,100 +2631,6 @@ u8 ata_bmdma_status(struct ata_port *ap) } EXPORT_SYMBOL_GPL(ata_bmdma_status); -/** - * ata_bus_reset - reset host port and associated ATA channel - * @ap: port to reset - * - * This is typically the first time we actually start issuing - * commands to the ATA channel. We wait for BSY to clear, then - * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its - * result. Determine what devices, if any, are on the channel - * by looking at the device 0/1 error register. Look at the signature - * stored in each device's taskfile registers, to determine if - * the device is ATA or ATAPI. - * - * LOCKING: - * PCI/etc. bus probe sem. - * Obtains host lock. - * - * SIDE EFFECTS: - * Sets ATA_FLAG_DISABLED if bus reset fails. - * - * DEPRECATED: - * This function is only for drivers which still use old EH and - * will be removed soon. - */ -void ata_bus_reset(struct ata_port *ap) -{ - struct ata_device *device = ap->link.device; - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - u8 err; - unsigned int dev0, dev1 = 0, devmask = 0; - int rc; - - DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no); - - /* determine if device 0/1 are present */ - if (ap->flags & ATA_FLAG_SATA_RESET) - dev0 = 1; - else { - dev0 = ata_devchk(ap, 0); - if (slave_possible) - dev1 = ata_devchk(ap, 1); - } - - if (dev0) - devmask |= (1 << 0); - if (dev1) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->sff_dev_select(ap, 0); - - /* issue bus reset */ - if (ap->flags & ATA_FLAG_SRST) { - rc = ata_bus_softreset(ap, devmask, - ata_deadline(jiffies, 40000)); - if (rc && rc != -ENODEV) - goto err_out; - } - - /* - * determine by signature whether we have ATA or ATAPI devices - */ - device[0].class = ata_sff_dev_classify(&device[0], dev0, &err); - if ((slave_possible) && (err != 0x81)) - device[1].class = ata_sff_dev_classify(&device[1], dev1, &err); - - /* is double-select really necessary? */ - if (device[1].class != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 1); - if (device[0].class != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 0); - - /* if no devices were detected, disable this port */ - if ((device[0].class == ATA_DEV_NONE) && - (device[1].class == ATA_DEV_NONE)) - goto err_out; - - if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { - /* set up device control for ATA_FLAG_SATA_RESET */ - iowrite8(ap->ctl, ioaddr->ctl_addr); - ap->last_ctl = ap->ctl; - } - - DPRINTK("EXIT\n"); - return; - -err_out: - ata_port_printk(ap, KERN_ERR, "disabling port\n"); - ata_port_disable(ap); - - DPRINTK("EXIT\n"); -} -EXPORT_SYMBOL_GPL(ata_bus_reset); - #ifdef CONFIG_PCI /** diff --git a/include/linux/libata.h b/include/linux/libata.h index b2f2003b92e..4fa748e9bc0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1631,7 +1631,6 @@ extern void ata_bmdma_setup(struct ata_queued_cmd *qc); extern void ata_bmdma_start(struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc); extern u8 ata_bmdma_status(struct ata_port *ap); -extern void ata_bus_reset(struct ata_port *ap); #ifdef CONFIG_PCI extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev); -- 2.41.0