From 26b818511c6562ce372566c219a2ef1afea35fe6 Mon Sep 17 00:00:00 2001 From: Wei WANG Date: Fri, 13 Sep 2013 17:45:43 +0800 Subject: [PATCH] mfd: rtsx: Modify rts5249_optimize_phy In some platforms, specially Thinkpad series, rts5249 won't be initialized properly. So we need adjust some phy parameters to improve the compatibility issue. It is a little different between simulation and real chip. We have no idea about which configuration is better before tape-out. We set default settings according to simulation, but need to tune these parameters after getting the real chip. I can't explain every change in detail here. The below information is just a rough description: PHY_REG_REV: Disable internal clkreq_tx, enable rx_pwst PHY_BPCR: No change, just turn the magic number to macro definitions PHY_PCR: Change OOBS sensitivity, from 60mV to 90mV PHY_RCR2: Control charge-pump current automatically PHY_FLD4: Use TX cmu reference clock PHY_RDR: Change RXDSEL from 30nF to 1.9nF PHY_RCR1: Change the duration between adp_st and asserting cp_en from 0.32 us to 0.64us PHY_FLD3: Adjust internal timers PHY_TUNE: Fine tune the regulator12 output voltage Signed-off-by: Wei WANG Signed-off-by: Lee Jones --- drivers/mfd/rts5249.c | 48 ++++++++++++++++++++++++++++++-- include/linux/mfd/rtsx_pci.h | 53 ++++++++++++++++++++++++++++++++++++ 2 files changed, 99 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c index 3b835f593e3..573de7bfcce 100644 --- a/drivers/mfd/rts5249.c +++ b/drivers/mfd/rts5249.c @@ -130,13 +130,57 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr) { int err; - err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV, 0xFE46); + err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV, + PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED | + PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN | + PHY_REG_REV_RX_PWST | PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 | + PHY_REG_REV_STOP_CLKRD | PHY_REG_REV_STOP_CLKWR); if (err < 0) return err; msleep(1); - return rtsx_pci_write_phy_register(pcr, PHY_BPCR, 0x05C0); + err = rtsx_pci_write_phy_register(pcr, PHY_BPCR, + PHY_BPCR_IBRXSEL | PHY_BPCR_IBTXSEL | + PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN); + if (err < 0) + return err; + err = rtsx_pci_write_phy_register(pcr, PHY_PCR, + PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 | + PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 | + PHY_PCR_RSSI_EN); + if (err < 0) + return err; + err = rtsx_pci_write_phy_register(pcr, PHY_RCR2, + PHY_RCR2_EMPHASE_EN | PHY_RCR2_NADJR | + PHY_RCR2_CDR_CP_10 | PHY_RCR2_CDR_SR_2 | + PHY_RCR2_FREQSEL_12 | PHY_RCR2_CPADJEN | + PHY_RCR2_CDR_SC_8 | PHY_RCR2_CALIB_LATE); + if (err < 0) + return err; + err = rtsx_pci_write_phy_register(pcr, PHY_FLD4, + PHY_FLD4_FLDEN_SEL | PHY_FLD4_REQ_REF | + PHY_FLD4_RXAMP_OFF | PHY_FLD4_REQ_ADDA | + PHY_FLD4_BER_COUNT | PHY_FLD4_BER_TIMER | + PHY_FLD4_BER_CHK_EN); + if (err < 0) + return err; + err = rtsx_pci_write_phy_register(pcr, PHY_RDR, PHY_RDR_RXDSEL_1_9); + if (err < 0) + return err; + err = rtsx_pci_write_phy_register(pcr, PHY_RCR1, + PHY_RCR1_ADP_TIME | PHY_RCR1_VCO_COARSE); + if (err < 0) + return err; + err = rtsx_pci_write_phy_register(pcr, PHY_FLD3, + PHY_FLD3_TIMER_4 | PHY_FLD3_TIMER_6 | + PHY_FLD3_RXDELINK); + if (err < 0) + return err; + return rtsx_pci_write_phy_register(pcr, PHY_TUNE, + PHY_TUNE_TUNEREF_1_0 | PHY_TUNE_VBGSEL_1252 | + PHY_TUNE_SDBUS_33 | PHY_TUNE_TUNED18 | + PHY_TUNE_TUNED12); } static int rts5249_turn_on_led(struct rtsx_pcr *pcr) diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h index d1382dfbeff..0ce77210550 100644 --- a/include/linux/mfd/rtsx_pci.h +++ b/include/linux/mfd/rtsx_pci.h @@ -756,6 +756,59 @@ #define PCR_SETTING_REG2 0x814 #define PCR_SETTING_REG3 0x747 +/* Phy bits */ +#define PHY_PCR_FORCE_CODE 0xB000 +#define PHY_PCR_OOBS_CALI_50 0x0800 +#define PHY_PCR_OOBS_VCM_08 0x0200 +#define PHY_PCR_OOBS_SEN_90 0x0040 +#define PHY_PCR_RSSI_EN 0x0002 + +#define PHY_RCR1_ADP_TIME 0x0100 +#define PHY_RCR1_VCO_COARSE 0x001F + +#define PHY_RCR2_EMPHASE_EN 0x8000 +#define PHY_RCR2_NADJR 0x4000 +#define PHY_RCR2_CDR_CP_10 0x0400 +#define PHY_RCR2_CDR_SR_2 0x0100 +#define PHY_RCR2_FREQSEL_12 0x0040 +#define PHY_RCR2_CPADJEN 0x0020 +#define PHY_RCR2_CDR_SC_8 0x0008 +#define PHY_RCR2_CALIB_LATE 0x0002 + +#define PHY_RDR_RXDSEL_1_9 0x4000 + +#define PHY_TUNE_TUNEREF_1_0 0x4000 +#define PHY_TUNE_VBGSEL_1252 0x0C00 +#define PHY_TUNE_SDBUS_33 0x0200 +#define PHY_TUNE_TUNED18 0x01C0 +#define PHY_TUNE_TUNED12 0X0020 + +#define PHY_BPCR_IBRXSEL 0x0400 +#define PHY_BPCR_IBTXSEL 0x0100 +#define PHY_BPCR_IB_FILTER 0x0080 +#define PHY_BPCR_CMIRROR_EN 0x0040 + +#define PHY_REG_REV_RESV 0xE000 +#define PHY_REG_REV_RXIDLE_LATCHED 0x1000 +#define PHY_REG_REV_P1_EN 0x0800 +#define PHY_REG_REV_RXIDLE_EN 0x0400 +#define PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 0x0040 +#define PHY_REG_REV_STOP_CLKRD 0x0020 +#define PHY_REG_REV_RX_PWST 0x0008 +#define PHY_REG_REV_STOP_CLKWR 0x0004 + +#define PHY_FLD3_TIMER_4 0x7800 +#define PHY_FLD3_TIMER_6 0x00E0 +#define PHY_FLD3_RXDELINK 0x0004 + +#define PHY_FLD4_FLDEN_SEL 0x4000 +#define PHY_FLD4_REQ_REF 0x2000 +#define PHY_FLD4_RXAMP_OFF 0x1000 +#define PHY_FLD4_REQ_ADDA 0x0800 +#define PHY_FLD4_BER_COUNT 0x00E0 +#define PHY_FLD4_BER_TIMER 0x000A +#define PHY_FLD4_BER_CHK_EN 0x0001 + #define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0) struct rtsx_pcr; -- 2.46.0