From 1cabcd3164029da5f718f0c9807bcc108b63cb7b Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 14 Sep 2012 17:34:11 +0100 Subject: [PATCH] staging: comedi: ni_labpc: convert printk() to dev_...() Convert the `printk()` calls in this driver to use the `dev_...()` calls where possible, or the `pr_...()` calls otherwise. Remove the ifdefed out code that prints the EEPROM contents. Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_labpc.c | 64 ++++++++--------------- 1 file changed, 23 insertions(+), 41 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 65d5dfcc794..8f835b68ad7 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -73,9 +73,6 @@ NI manuals: */ -#undef LABPC_DEBUG -/* #define LABPC_DEBUG enable debugging messages */ - #include #include #include @@ -538,17 +535,9 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase, short lsb, msb; int ret; - printk(KERN_ERR "comedi%d: ni_labpc: %s, io 0x%lx", dev->minor, - thisboard->name, - iobase); - if (irq) - printk(", irq %u", irq); - if (dma_chan) - printk(", dma %u", dma_chan); - printk("\n"); - + dev_info(dev->class_dev, "ni_labpc: %s\n", thisboard->name); if (iobase == 0) { - printk(KERN_ERR "io base address is zero!\n"); + dev_err(dev->class_dev, "io base address is zero!\n"); return -EINVAL; } /* request io regions for isa boards */ @@ -556,7 +545,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase, /* check if io addresses are available */ if (!request_region(iobase, LABPC_SIZE, driver_labpc.driver_name)) { - printk(KERN_ERR "I/O port conflict\n"); + dev_err(dev->class_dev, "I/O port conflict\n"); return -EIO; } } @@ -589,7 +578,8 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase, isr_flags |= IRQF_SHARED; if (request_irq(irq, labpc_interrupt, isr_flags, driver_labpc.driver_name, dev)) { - printk(KERN_ERR "unable to allocate irq %u\n", irq); + dev_err(dev->class_dev, "unable to allocate irq %u\n", + irq); return -EINVAL; } } @@ -598,19 +588,21 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase, #ifdef CONFIG_ISA_DMA_API /* grab dma channel */ if (dma_chan > 3) { - printk(KERN_ERR " invalid dma channel %u\n", dma_chan); + dev_err(dev->class_dev, "invalid dma channel %u\n", dma_chan); return -EINVAL; } else if (dma_chan) { /* allocate dma buffer */ devpriv->dma_buffer = kmalloc(dma_buffer_size, GFP_KERNEL | GFP_DMA); if (devpriv->dma_buffer == NULL) { - printk(KERN_ERR " failed to allocate dma buffer\n"); + dev_err(dev->class_dev, + "failed to allocate dma buffer\n"); return -ENOMEM; } if (request_dma(dma_chan, driver_labpc.driver_name)) { - printk(KERN_ERR " failed to allocate dma channel %u\n", - dma_chan); + dev_err(dev->class_dev, + "failed to allocate dma channel %u\n", + dma_chan); return -EINVAL; } devpriv->dma_chan = dma_chan; @@ -706,12 +698,6 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase, for (i = 0; i < EEPROM_SIZE; i++) devpriv->eeprom_data[i] = labpc_eeprom_read(dev, i); -#ifdef LABPC_DEBUG - printk(KERN_ERR " eeprom:"); - for (i = 0; i < EEPROM_SIZE; i++) - printk(" %i:0x%x ", i, devpriv->eeprom_data[i]); - printk("\n"); -#endif } else s->type = COMEDI_SUBD_UNUSED; @@ -740,8 +726,8 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) irq = it->options[1]; dma_chan = it->options[2]; #else - printk(KERN_ERR " this driver has not been built with ISA DMA " - "support.\n"); + dev_err(dev->class_dev, + "ni_labpc driver has not been built with ISA DMA support.\n"); return -EINVAL; #endif break; @@ -756,18 +742,14 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) iobase = (unsigned long)devpriv->mite->daq_io_addr; irq = mite_irq(devpriv->mite); #else - printk(KERN_ERR " this driver has not been built with PCI " - "support.\n"); + dev_err(dev->class_dev, + "ni_labpc driver has not been built with PCI support.\n"); return -EINVAL; #endif break; - case pcmcia_bustype: - printk - (" this driver does not support pcmcia cards, use ni_labpc_cs.o\n"); - return -EINVAL; - break; default: - printk(KERN_ERR "bug! couldn't determine board type\n"); + dev_err(dev->class_dev, + "ni_labpc: bug! couldn't determine board type\n"); return -EINVAL; break; } @@ -801,7 +783,7 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot) } } } - printk(KERN_ERR "no device found\n"); + dev_err(dev->class_dev, "no device found\n"); mite_list_devices(); return -EIO; } @@ -872,8 +854,7 @@ static enum scan_mode labpc_ai_scan_mode(const struct comedi_cmd *cmd) if (CR_CHAN(cmd->chanlist[0]) > CR_CHAN(cmd->chanlist[1])) return MODE_MULT_CHAN_DOWN; - printk(KERN_ERR "ni_labpc: bug! this should never happen\n"); - + pr_err("ni_labpc: bug! cannot determine AI scan mode\n"); return 0; } @@ -928,7 +909,8 @@ static int labpc_ai_chanlist_invalid(const struct comedi_device *dev, } break; default: - printk(KERN_ERR "ni_labpc: bug! in chanlist check\n"); + dev_err(dev->class_dev, + "ni_labpc: bug! in chanlist check\n"); return 1; break; } @@ -1790,8 +1772,8 @@ static int labpc_eeprom_write_insn(struct comedi_device *dev, /* only allow writes to user area of eeprom */ if (channel < 16 || channel > 127) { - printk - ("eeprom writes are only allowed to channels 16 through 127 (the pointer and user areas)"); + dev_dbg(dev->class_dev, + "eeprom writes are only allowed to channels 16 through 127 (the pointer and user areas)\n"); return -EINVAL; } -- 2.41.0