From 0edc352743156a39dfc3f21206b2bf7b9f371832 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Nov 2008 22:24:29 -0800 Subject: [PATCH] ixgb: convert to net_device_ops Convert this driver to network device ops. Compile tested only. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ixgb/ixgb_main.c | 31 ++++++++++++++++++------------- drivers/net/ixgbe/ixgbe_main.c | 32 ++++++++++++++++++-------------- 2 files changed, 36 insertions(+), 27 deletions(-) diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index cb7d1a6d343..3ca9daa70b3 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -321,6 +321,23 @@ ixgb_reset(struct ixgb_adapter *adapter) } } +static const struct net_device_ops ixgb_netdev_ops = { + .ndo_open = ixgb_open, + .ndo_stop = ixgb_close, + .ndo_get_stats = ixgb_get_stats, + .ndo_set_multicast_list = ixgb_set_multi, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = ixgb_set_mac, + .ndo_change_mtu = ixgb_change_mtu, + .ndo_tx_timeout = ixgb_tx_timeout, + .ndo_vlan_rx_register = ixgb_vlan_rx_register, + .ndo_vlan_rx_add_vid = ixgb_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = ixgb_vlan_rx_kill_vid, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = ixgb_netpoll, +#endif +}; + /** * ixgb_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -396,23 +413,11 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } } - netdev->open = &ixgb_open; - netdev->stop = &ixgb_close; + netdev->netdev_ops = &ixgb_netdev_ops; netdev->hard_start_xmit = &ixgb_xmit_frame; - netdev->get_stats = &ixgb_get_stats; - netdev->set_multicast_list = &ixgb_set_multi; - netdev->set_mac_address = &ixgb_set_mac; - netdev->change_mtu = &ixgb_change_mtu; ixgb_set_ethtool_ops(netdev); - netdev->tx_timeout = &ixgb_tx_timeout; netdev->watchdog_timeo = 5 * HZ; netif_napi_add(netdev, &adapter->napi, ixgb_clean, 64); - netdev->vlan_rx_register = ixgb_vlan_rx_register; - netdev->vlan_rx_add_vid = ixgb_vlan_rx_add_vid; - netdev->vlan_rx_kill_vid = ixgb_vlan_rx_kill_vid; -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = ixgb_netpoll; -#endif strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index d1f80dd88bc..6fb873889e7 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3727,6 +3727,23 @@ static int ixgbe_link_config(struct ixgbe_hw *hw) return hw->mac.ops.setup_link_speed(hw, autoneg, true, true); } +static const struct net_device_ops ixgbe_netdev_ops = { + .ndo_open = ixgbe_open, + .ndo_stop = ixgbe_close, + .ndo_get_stats = ixgbe_get_stats, + .ndo_set_multicast_list = ixgbe_set_rx_mode, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = ixgbe_set_mac, + .ndo_change_mtu = ixgbe_change_mtu, + .ndo_tx_timeout = ixgbe_tx_timeout, + .ndo_vlan_rx_register = ixgbe_vlan_rx_register, + .ndo_vlan_rx_add_vid = ixgbe_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = ixgbe_netpoll, +#endif +}; + /** * ixgbe_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -3808,23 +3825,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, continue; } - netdev->open = &ixgbe_open; - netdev->stop = &ixgbe_close; + netdev->netdev_ops = &ixgbe_netdev_ops; netdev->hard_start_xmit = &ixgbe_xmit_frame; - netdev->get_stats = &ixgbe_get_stats; - netdev->set_rx_mode = &ixgbe_set_rx_mode; - netdev->set_multicast_list = &ixgbe_set_rx_mode; - netdev->set_mac_address = &ixgbe_set_mac; - netdev->change_mtu = &ixgbe_change_mtu; ixgbe_set_ethtool_ops(netdev); - netdev->tx_timeout = &ixgbe_tx_timeout; netdev->watchdog_timeo = 5 * HZ; - netdev->vlan_rx_register = ixgbe_vlan_rx_register; - netdev->vlan_rx_add_vid = ixgbe_vlan_rx_add_vid; - netdev->vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid; -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = ixgbe_netpoll; -#endif strcpy(netdev->name, pci_name(pdev)); adapter->bd_number = cards_found; -- 2.46.0