From 08fb68bb4bbc9c5970e4ed4920cb6144a70684cd Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 13 Oct 2007 23:56:32 +0200 Subject: [PATCH] i2c: Move i2c-dev interfaces to i2c-dev.h Move the i2c-dev support into where it should always have lived. Now no longer holds stuff related to the optional userspace /dev/i2c-X interface. Improve the descriptions for these ioctl requests. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- include/linux/i2c-dev.h | 31 +++++++++++++++++++++++++++++-- include/linux/i2c.h | 30 ------------------------------ 2 files changed, 29 insertions(+), 32 deletions(-) diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h index 81c229a0fbc..311315b56b6 100644 --- a/include/linux/i2c-dev.h +++ b/include/linux/i2c-dev.h @@ -25,8 +25,31 @@ #include #include -/* Some IOCTL commands are defined in */ -/* Note: 10-bit addresses are NOT supported! */ +/* /dev/i2c-X ioctl commands. The ioctl's parameter is always an + * unsigned long, except for: + * - I2C_FUNCS, takes pointer to an unsigned long + * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data + * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data + */ +#define I2C_RETRIES 0x0701 /* number of times a device address should + be polled when not acknowledging */ +#define I2C_TIMEOUT 0x0702 /* set timeout in jiffies - call with int */ + +/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses + * are NOT supported! (due to code brokenness) + */ +#define I2C_SLAVE 0x0703 /* Use this slave address */ +#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it + is already in use by a driver! */ +#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ + +#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */ + +#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */ + +#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */ +#define I2C_SMBUS 0x0720 /* SMBus transfer */ + /* This is the structure as used in the I2C_SMBUS ioctl call */ struct i2c_smbus_ioctl_data { @@ -44,4 +67,8 @@ struct i2c_rdwr_ioctl_data { #define I2C_RDRW_IOCTL_MAX_MSGS 42 +#ifdef __KERNEL__ +#define I2C_MAJOR 89 /* Device major number */ +#endif + #endif /* _LINUX_I2C_DEV_H */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index ae477b3106a..e43d99d7551 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -557,38 +557,8 @@ union i2c_smbus_data { #define I2C_SMBUS_I2C_BLOCK_DATA 8 -/* ----- commands for the ioctl like i2c_command call: - * note that additional calls are defined in the algorithm and hw - * dependent layers - these can be listed here, or see the - * corresponding header files. - */ - /* -> bit-adapter specific ioctls */ -#define I2C_RETRIES 0x0701 /* number of times a device address */ - /* should be polled when not */ - /* acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ - - -/* this is for i2c-dev.c */ -#define I2C_SLAVE 0x0703 /* Change slave address */ - /* Attn.: Slave address is 7 or 10 bits */ -#define I2C_SLAVE_FORCE 0x0706 /* Change slave address */ - /* Attn.: Slave address is 7 or 10 bits */ - /* This changes the address, even if it */ - /* is already taken! */ -#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ - -#define I2C_FUNCS 0x0705 /* Get the adapter functionality */ -#define I2C_RDWR 0x0707 /* Combined R/W transfer (one stop only)*/ -#define I2C_PEC 0x0708 /* != 0 for SMBus PEC */ - -#define I2C_SMBUS 0x0720 /* SMBus-level access */ - -/* ----- I2C-DEV: char device interface stuff ------------------------- */ #ifdef __KERNEL__ -#define I2C_MAJOR 89 /* Device major number */ - /* These defines are used for probing i2c client addresses */ /* The length of the option lists */ #define I2C_CLIENT_MAX_OPTS 48 -- 2.41.0