Jingoo Han [Mon, 29 Apr 2013 23:18:33 +0000 (16:18 -0700)]
drivers/rtc/class.c: use struct device as the first argument for devm_rtc_device_register()
Other devm_* APIs use 'struct device *dev' as the first argument. Thus,
in order to sync with other devm_* functions, struct device is used as
the first argument for devm_rtc_device_register().
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the kernel was booted with the "quiet" boot option we have currently no
chance to see why an initrd fails. Change KERN_WARNING to KERN_ERR to see
what is going on.
Signed-off-by: Richard Weinberger <richard@nod.at> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Rostedt [Mon, 29 Apr 2013 23:18:18 +0000 (16:18 -0700)]
init: scream bloody murder if interrupts are enabled too early
As I was testing a lot of my code recently, and having several
"successes", I accidentally noticed in the dmesg this little line:
start_kernel(): bug: interrupts were enabled *very* early, fixing it
Sure enough, one of my patches two commits ago enabled interrupts early.
The sad part here is that I never noticed it, and I ran several tests with
ktest too, and ktest did not notice this line.
What ktest looks for (and so does many other automated testing scripts) is
a back trace produced by a WARN_ON() or BUG(). As a back trace was never
produced, my buggy patch could have slipped into linux-next, or even
worse, mainline.
Adding a WARN(!irqs_disabled()) makes this bug a little more obvious:
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2003252k/2054848k available (4857k kernel code, 460k absent, 51136k reserved, 6210k data, 1096k init)
------------[ cut here ]------------
WARNING: at /home/rostedt/work/git/linux-trace.git/init/main.c:543 start_kernel+0x21e/0x415()
Hardware name: To Be Filled By O.E.M.
Interrupts were enabled *very* early, fixing it
Modules linked in:
Pid: 0, comm: swapper/0 Not tainted 3.8.0-test+ #286
Call Trace:
warn_slowpath_common+0x83/0x9b
warn_slowpath_fmt+0x46/0x48
start_kernel+0x21e/0x415
x86_64_start_reservations+0x10e/0x112
x86_64_start_kernel+0x102/0x111
---[ end trace 007d8b0491b4f5d8 ]---
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:4352 nr_irqs:712 16
Console: colour VGA+ 80x25
console [ttyS0] enabled, bootconsole disabled
Do you see it?
The original version of this patch just slapped a WARN_ON() in there and
kept the printk(). Ard van Breemen suggested using the WARN() interface,
which makes the code a bit cleaner.
Also, while examining other warnings in init/main.c, I found two other
locations that deserve a bloody murder scream if their conditions are hit,
and updated them accordingly.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ard van Breemen <ard@telegraafnet.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mugunthan V N [Mon, 29 Apr 2013 23:18:17 +0000 (16:18 -0700)]
checkpatch: add Suggested-by as a standard signature
As people started using Suggested-by as standard signature, adding
"Suggested-by" to the standard signature so that checkpatch won't
generate warning when Suggested-by is used in patch signature
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch: only warn for empty lines before closing braces by themselves
This check was intended to catch extra newlines at the end of a function
definition, but it would trigger on any closing brace, including those
of inline functions and macro definitions, triggering false positives.
Now, only closing braces on a line by themselves trigger this check.
Tested with:
$ cat test.h
/* test.h - Test file */
static inline int foo(void) { return 0; }
static inline int bar(void)
{
return 1;
}
$ ./scripts/checkpatch.pl --strict -f test.h # Before this commit
CHECK: Blank lines aren't necessary before a close brace '}'
+
+static inline int foo(void) { return 0; }
CHECK: Blank lines aren't necessary before a close brace '}'
+
+}
Joe Perches [Mon, 29 Apr 2013 23:18:12 +0000 (16:18 -0700)]
checkpatch: add check for reuse of krealloc arg
On Thu, 2013-03-14 at 13:30 +0000, David Woodhouse wrote:
> If krealloc() returns NULL, it *doesn't* free the original. So any code
> of the form 'foo = krealloc(foo, …);' is almost certainly a bug.
So add a check for it to checkpatch.
Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
argv_split() allocates argv[count_argc(str)] array and assumes that it
will find the same number of arguments later. This is obviously wrong if
this string can be changed, say, by sysctl.
With this patch argv_split() kstrndup's the whole string and does not
split it, we simply replace the spaces with zeroes and keep the allocated
memory in argv[-1] for argv_free(arg).
We do not use argv[0] because:
- str can be all-spaces or empty. In fact this case is fine,
we could kfree() it before return, but:
- str can have a space at the start, and we can not rely on
kstrndup(skip_spaces(str)) because it can equally race if
this string is mutable.
Also, simplify count_argc() and kill the no longer used skip_arg().
Kim, Milo [Mon, 29 Apr 2013 23:18:06 +0000 (16:18 -0700)]
backlight: lp855x: add a device tree structure
Enable supporting the DT structure of LP855x family devices. If the
platform data is NULL, the driver tries to parse a DT structure. Then,
the platform data is copied from the DT. Documentation is added as well.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kim, Milo [Mon, 29 Apr 2013 23:18:05 +0000 (16:18 -0700)]
backlight: lp855x: remove duplicate platform data
The 'load_new_rom_data' was used for checking whether new ROM data should
be updated or not.
However, we can decide it with 'size_program' data. If the size is
greater than 0, it means updating ROM area is required. Otherwise, the
default ROM data will be used. Therefore, this duplicate platform data
can be removed.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kim, Milo [Mon, 29 Apr 2013 23:18:03 +0000 (16:18 -0700)]
backlight: lp855x: move backlight mode platform data
The brightness of LP855x devices is controlled by I2C register or PWM
input . This mode was selected through the platform data, but it can be
chosen by the driver internally without platform data configuration.
How to decide the control mode:
If the PWM period has specific value, the mode is PWM input.
On the other hand, the mode is register-based.
This mode selection is done on the _probe().
Move 'mode' from a header file to the driver private data structure,
'lp855 x'. And correlated code was replaced.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Mon, 29 Apr 2013 23:18:01 +0000 (16:18 -0700)]
backlight: vgg2432a4: convert vgg2432a4_driver to dev_pm_ops
Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management. Also, use of
pm_message_t is deprecated. Thus, it is removed.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Platform LCD devices may need to do some device-specific initialization
before they can be used (regulator or GPIO setup, for example), but
currently the driver does not support any way of doing this. This patch
adds a probe() callback to plat_lcd_data which platform LCD devices can
set to indicate that device-specific initialization is needed.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Mon, 29 Apr 2013 23:17:57 +0000 (16:17 -0700)]
backlight: ili922x: use spi_set_drvdata()
Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Mon, 29 Apr 2013 23:17:56 +0000 (16:17 -0700)]
backlight: ili9320: use spi_set_drvdata()
Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/video/backlight/as3711_bl.c: add OF support
Add support for configuring AS3711 backlight driver from DT.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Simon Horman <horms@verge.net.au> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add LCD driver for Ilitek ILI9221/ILI9222 controller. The driver uses
SPI interface for controller access and configuration and RGB interface
for graphics data transfer.
Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/video/backlight/adp5520_bl.c: fix compiler warning in adp5520_show()
While compiling with make W=1 (gcc gcc (GCC) 4.7.2 20121109 (Red Hat
4.7.2-8)) the following warning happens:
drivers/video/backlight/adp5520_bl.c: In function `adp5520_show':
drivers/video/backlight/adp5520_bl.c:146:6: warning: variable `error' set but not used [-Wunused-but-set-variable]
fixed by checking the return value of the variable
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Bolle [Mon, 29 Apr 2013 23:17:48 +0000 (16:17 -0700)]
drivers/video/backlight/Kconfig: fix typo "MACH_SAM9...EK" three times
Fix three typos (originally) introduced by commit a9a84c37d1ee
("atmel_lcdfb: backlight control").
Two of these typos were introduced in v2.6.25. (The third was
introduced in 915190f7d4f0 ("[ARM] 5614/1: at91: atmel_lcdfb: add
at91sam9g10 support to atmel LCD driver")). Checking these commits
reveals that the default value of 'y' has never been set automatically
in all releases since v2.6.25! Perhaps this line might as well be
dropped.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / ~shefty / rdma-dev.git / log