netfilter: nf_tables: check if payload length is a power of 2
Add a check if payload's length is a power of 2 when selecting ops.
The fast ops were meant for well aligned loads, also this fixes a
small bug when using a length of 3 with some offsets which causes
only 1 byte to be loaded because the fast ops are chosen.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Sat, 15 Feb 2014 22:48:45 +0000 (23:48 +0100)]
netfilter: nf_tables: fix nf_trace always-on with XT_TRACE=n
When using nftables with CONFIG_NETFILTER_XT_TARGET_TRACE=n, we get
lots of "TRACE: filter:output:policy:1 IN=..." warnings as several
places will leave skb->nf_trace uninitialised.
Unlike iptables tracing functionality is not conditional in nftables,
so always copy/zero nf_trace setting when nftables is enabled.
Move this into __nf_copy() helper.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
FX Le Bail [Tue, 11 Feb 2014 14:49:25 +0000 (15:49 +0100)]
netfilter: nf_nat_snmp_basic: fix duplicates in if/else branches
The solution was found by Patrick in 2.4 kernel sources.
Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There are two checks for CONFIG_NET_CLS_ROUTE, but the corresponding
Kconfig symbol was dropped in v2.6.39. Since the code guards access to
dst_entry.tclassid it seems CONFIG_IP_ROUTE_CLASSID should be used
instead.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric Dumazet [Mon, 10 Feb 2014 19:42:35 +0000 (11:42 -0800)]
6lowpan: fix lockdep splats
When a device ndo_start_xmit() calls again dev_queue_xmit(),
lockdep can complain because dev_queue_xmit() is re-entered and the
spinlocks protecting tx queues share a common lockdep class.
Same issue was fixed for bonding/l2tp/ppp in commits
0daa2303028a6 ("[PATCH] bonding: lockdep annotation") 49ee49202b4ac ("bonding: set qdisc_tx_busylock to avoid LOCKDEP splat") 23d3b8bfb8eb2 ("net: qdisc busylock needs lockdep annotations ") 303c07db487be ("ppp: set qdisc_tx_busylock to avoid LOCKDEP splat ")
Reported-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Greene [Mon, 10 Feb 2014 19:34:04 +0000 (14:34 -0500)]
alx: add missing stats_lock spinlock init
Trivial fix for init time stack trace occuring in
alx_get_stats64 upon start up. Should have been part of
commit adding the spinlock: f1b6b106 alx: add alx_get_stats64 operation
Signed-off-by: John Greene <jogreene@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Yao [Sun, 9 Feb 2014 00:32:01 +0000 (19:32 -0500)]
9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers
The 9p-virtio transport does zero copy on things larger than 1024 bytes
in size. It accomplishes this by returning the physical addresses of
pages to the virtio-pci device. At present, the translation is usually a
bit shift.
That approach produces an invalid page address when we read/write to
vmalloc buffers, such as those used for Linux kernel modules. Any
attempt to load a Linux kernel module from 9p-virtio produces the
following stack.
qemu-system-x86_64: virtio: trying to map MMIO memory
This patch enables 9p-virtio to correctly handle this case. This not
only enables us to load Linux kernel modules off virtfs, but also
enables ZFS file-based vdevs on virtfs to be used without killing QEMU.
Special thanks to both Avi Kivity and Alexander Graf for their
interpretation of QEMU backtraces. Without their guidence, tracking down
this bug would have taken much longer. Also, special thanks to Linus
Torvalds for his insightful explanation of why this should use
is_vmalloc_addr() instead of is_vmalloc_or_module_addr():
https://lkml.org/lkml/2014/2/8/272
Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
dingtianhong [Mon, 10 Feb 2014 08:33:59 +0000 (16:33 +0800)]
bonding: remove unwanted bond lock for enslave processing
The bond enslave processing don't hold bond->lock anymore,
so release an unlocked rw lock will cause warning message,
remove the unwanted read_unlock(&bond->lock).
Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Ogness [Mon, 10 Feb 2014 02:40:11 +0000 (18:40 -0800)]
tcp: tsq: fix nonagle handling
Commit 46d3ceabd8d9 ("tcp: TCP Small Queues") introduced a possible
regression for applications using TCP_NODELAY.
If TCP session is throttled because of tsq, we should consult
tp->nonagle when TX completion is done and allow us to send additional
segment, especially if this segment is not a full MSS.
Otherwise this segment is sent after an RTO.
[edumazet] : Cooked the changelog, added another fix about testing
sk_wmem_alloc twice because TX completion can happen right before
setting TSQ_THROTTLED bit.
This problem is particularly visible with recent auto corking,
but might also be triggered with low tcp_limit_output_bytes
values or NIC drivers delaying TX completion by hundred of usec,
and very low rtt.
Thomas Glanzmann for example reported an iscsi regression, caused
by tcp auto corking making this bug quite visible.
Fixes: 46d3ceabd8d9 ("tcp: TCP Small Queues") Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 10 Feb 2014 22:35:11 +0000 (14:35 -0800)]
Merge branch 'bridge'
Toshiaki Makita says:
====================
bridge: Fix corner case problems around local fdb entries
There are so many corner cases that are not handled properly around local
fdb entries.
- We might fail to delete the old entry and might delete an arbitrary local
entry when changing mac address of a bridge port.
- We always fail to delete the old entry when changing mac address of the
bridge device.
- We might incorrectly delete a necessary entry when detaching a bridge port.
- We might incorrectly delete a necessary entry when deleting a vlan.
and so on.
This is a patch series to fix these issues.
v3:
- Handle NTF_USE case in patch 1/9, commented by Vlad Yasevich.
- Tested port detach/attach and didn't find any problem with patch 5/9,
suggested by Stephen Hemminger.
- Add comments about possible inconsistent state in current implementation
into commit log of patch 5/9, found by the above test.
- Reword unintensive changelog of patch 7/9, commented by Vlad Yasevich.
v2:
- Change the way to find the old entry in br_fdb_changeaddr() from memorizing
previous port address to introducing a new flag indicating whether a fdb
entry is added by user or not, commented by Stephen Hemminger.
- Add a fix for the way to insert a new address in br_fdb_changeaddr().
- Prevent creating an entry such that its dst is NULL in br_add_if() to
preserve old behavior, commented by Vlad Yasevich.
- Add more comments about slight behavior change, where the bridge device
come to be able to receive traffic to an address it has during short
window, to changelogs, commented by Vlad Yasevich.
- Add a fix for possible race in br_fdb_change_mac_address().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Fri, 7 Feb 2014 07:48:26 +0000 (16:48 +0900)]
bridge: Prevent possible race condition in br_fdb_change_mac_address
br_fdb_change_mac_address() calls fdb_insert()/fdb_delete() without
br->hash_lock.
These hash list updates are racy with br_fdb_update()/br_fdb_cleanup().
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Fri, 7 Feb 2014 07:48:25 +0000 (16:48 +0900)]
bridge: Properly check if local fdb entry can be deleted when deleting vlan
Vlan codes unconditionally delete local fdb entries.
We should consider the possibility that other ports have the same
address and vlan.
Example of problematic case:
ip link set eth0 address 12:34:56:78:90:ab
ip link set eth1 address aa:bb:cc:dd:ee:ff
brctl addif br0 eth0
brctl addif br0 eth1 # br0 will have mac address 12:34:56:78:90:ab
bridge vlan add dev eth0 vid 10
bridge vlan add dev eth1 vid 10
bridge vlan add dev br0 vid 10 self
We will have fdb entry such that f->dst == eth0, f->vlan_id == 10 and
f->addr == 12:34:56:78:90:ab at this time.
Next, delete eth0 vlan 10.
bridge vlan del dev eth0 vid 10
In this case, we still need the entry for br0, but it will be deleted.
Note that br0 needs the entry even though its mac address is not set
manually. To delete the entry with proper condition checking,
fdb_delete_local() is suitable to use.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Fri, 7 Feb 2014 07:48:24 +0000 (16:48 +0900)]
bridge: Properly check if local fdb entry can be deleted in br_fdb_delete_by_port
br_fdb_delete_by_port() doesn't care about vlan and mac address of the
bridge device.
As the check is almost the same as mac address changing, slightly modify
fdb_delete_local() and use it.
Note that we can always set added_by_user to 0 in fdb_delete_local() because
- br_fdb_delete_by_port() calls fdb_delete_local() for local entries
regardless of its added_by_user. In this case, we have to check if another
port has the same address and vlan, and if found, we have to create the
entry (by changing dst). This is kernel-added entry, not user-added.
- br_fdb_changeaddr() doesn't call fdb_delete_local() for user-added entry.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Fri, 7 Feb 2014 07:48:23 +0000 (16:48 +0900)]
bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address
br_fdb_change_mac_address() doesn't check if the local entry has the
same address as any of bridge ports.
Although I'm not sure when it is beneficial, current implementation allow
the bridge device to receive any mac address of its ports.
To preserve this behavior, we have to check if the mac address of the
entry being deleted is identical to that of any port.
As this check is almost the same as that in br_fdb_changeaddr(), create
a common function fdb_delete_local() and call it from
br_fdb_changeadddr() and br_fdb_change_mac_address().
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Fri, 7 Feb 2014 07:48:22 +0000 (16:48 +0900)]
bridge: Fix the way to check if a local fdb entry can be deleted
We should take into account the followings when deleting a local fdb
entry.
- nbp_vlan_find() can be used only when vid != 0 to check if an entry is
deletable, because a fdb entry with vid 0 can exist at any time while
nbp_vlan_find() always return false with vid 0.
Example of problematic case:
ip link set eth0 address 12:34:56:78:90:ab
ip link set eth1 address 12:34:56:78:90:ab
brctl addif br0 eth0
brctl addif br0 eth1
ip link set eth0 address aa:bb:cc:dd:ee:ff
Then, the fdb entry 12:34:56:78:90:ab will be deleted even though the
bridge port eth1 still has that address.
- The port to which the bridge device is attached might needs a local entry
if its mac address is set manually.
Example of problematic case:
ip link set eth0 address 12:34:56:78:90:ab
brctl addif br0 eth0
ip link set br0 address 12:34:56:78:90:ab
ip link set eth0 address aa:bb:cc:dd:ee:ff
Then, the fdb still must have the entry 12:34:56:78:90:ab, but it will be
deleted.
We can use br->dev->addr_assign_type to check if the address is manually
set or not, but I propose another approach.
Since we delete and insert local entries whenever changing mac address
of the bridge device, we can change dst of the entry to NULL regardless of
addr_assign_type when deleting an entry associated with a certain port,
and if it is found to be unnecessary later, then delete it.
That is, if changing mac address of a port, the entry might be changed
to its dst being NULL first, but is eventually deleted when recalculating
and changing bridge id.
This approach is especially useful when we want to share the code with
deleting vlan in which the bridge device might want such an entry regardless
of addr_assign_type, and makes things easy because we don't have to consider
if mac address of the bridge device will be changed or not at the time we
delete a local entry of a port, which means fdb code will not be bothered
even if the bridge id calculating logic is changed in the future.
Also, this change reduces inconsistent state, where frames whose dst is the
mac address of the bridge, can't reach the bridge because of premature fdb
entry deletion. This change reduces the possibility that the bridge device
replies unreachable mac address to arp requests, which could occur during
the short window between calling del_nbp() and br_stp_recalculate_bridge_id()
in br_del_if(). This will effective after br_fdb_delete_by_port() starts to
use the same code by following patch.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Fri, 7 Feb 2014 07:48:21 +0000 (16:48 +0900)]
bridge: Change local fdb entries whenever mac address of bridge device changes
Vlan code may need fdb change when changing mac address of bridge device
even if it is caused by the mac address changing of a bridge port.
Example configuration:
ip link set eth0 address 12:34:56:78:90:ab
ip link set eth1 address aa:bb:cc:dd:ee:ff
brctl addif br0 eth0
brctl addif br0 eth1 # br0 will have mac address 12:34:56:78:90:ab
bridge vlan add dev br0 vid 10 self
bridge vlan add dev eth0 vid 10
We will have fdb entry such that f->dst == NULL, f->vlan_id == 10 and
f->addr == 12:34:56:78:90:ab at this time.
Next, change the mac address of eth0 to greater value.
ip link set eth0 address ee:ff:12:34:56:78
Then, mac address of br0 will be recalculated and set to aa:bb:cc:dd:ee:ff.
However, an entry aa:bb:cc:dd:ee:ff will not be created and we will be not
able to communicate using br0 on vlan 10.
Address this issue by deleting and adding local entries whenever
changing the mac address of the bridge device.
If there already exists an entry that has the same address, for example,
in case that br_fdb_changeaddr() has already inserted it,
br_fdb_change_mac_address() will simply fail to insert it and no
duplicated entry will be made, as it was.
This approach also needs br_add_if() to call br_fdb_insert() before
br_stp_recalculate_bridge_id() so that we don't create an entry whose
dst == NULL in this function to preserve previous behavior.
Note that this is a slight change in behavior where the bridge device can
receive the traffic to the new address before calling
br_stp_recalculate_bridge_id() in br_add_if().
However, it is not a problem because we have already the address on the
new port and such a way to insert new one before recalculating bridge id
is taken in br_device_event() as well.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Fri, 7 Feb 2014 07:48:20 +0000 (16:48 +0900)]
bridge: Fix the way to find old local fdb entries in br_fdb_change_mac_address
We have been always failed to delete the old entry at
br_fdb_change_mac_address() because br_set_mac_address() updates
dev->dev_addr before calling br_fdb_change_mac_address() and
br_fdb_change_mac_address() uses dev->dev_addr to find the old entry.
That update of dev_addr is completely unnecessary because the same work
is done in br_stp_change_bridge_id() which is called right away after
calling br_fdb_change_mac_address().
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Fri, 7 Feb 2014 07:48:19 +0000 (16:48 +0900)]
bridge: Fix the way to insert new local fdb entries in br_fdb_changeaddr
Since commit bc9a25d21ef8 ("bridge: Add vlan support for local fdb entries"),
br_fdb_changeaddr() has inserted a new local fdb entry only if it can
find old one. But if we have two ports where they have the same address
or user has deleted a local entry, there will be no entry for one of the
ports.
Example of problematic case:
ip link set eth0 address aa:bb:cc:dd:ee:ff
ip link set eth1 address aa:bb:cc:dd:ee:ff
brctl addif br0 eth0
brctl addif br0 eth1 # eth1 will not have a local entry due to dup.
ip link set eth1 address 12:34:56:78:90:ab
Then, the new entry for the address 12:34:56:78:90:ab will not be
created, and the bridge device will not be able to communicate.
Insert new entries regardless of whether we can find old entries or not.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Fri, 7 Feb 2014 07:48:18 +0000 (16:48 +0900)]
bridge: Fix the way to find old local fdb entries in br_fdb_changeaddr
br_fdb_changeaddr() assumes that there is at most one local entry per port
per vlan. It used to be true, but since commit 36fd2b63e3b4 ("bridge: allow
creating/deleting fdb entries via netlink"), it has not been so.
Therefore, the function might fail to search a correct previous address
to be deleted and delete an arbitrary local entry if user has added local
entries manually.
Example of problematic case:
ip link set eth0 address ee:ff:12:34:56:78
brctl addif br0 eth0
bridge fdb add 12:34:56:78:90:ab dev eth0 master
ip link set eth0 address aa:bb:cc:dd:ee:ff
Then, the address 12:34:56:78:90:ab might be deleted instead of
ee:ff:12:34:56:78, the original mac address of eth0.
Address this issue by introducing a new flag, added_by_user, to struct
net_bridge_fdb_entry.
Note that br_fdb_delete_by_port() has to set added_by_user to 0 in cases
like:
ip link set eth0 address 12:34:56:78:90:ab
ip link set eth1 address aa:bb:cc:dd:ee:ff
brctl addif br0 eth0
bridge fdb add aa:bb:cc:dd:ee:ff dev eth0 master
brctl addif br0 eth1
brctl delif br0 eth0
In this case, kernel should delete the user-added entry aa:bb:cc:dd:ee:ff,
but it also should have been added by "brctl addif br0 eth1" originally,
so we don't delete it and treat it a new kernel-created entry.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Sun, 9 Feb 2014 22:30:32 +0000 (23:30 +0100)]
tcp: correct code comment stating 3 min timeout for FIN_WAIT2, we only do 1 min
As far as I can tell we have used a default of 60 seconds for
FIN_WAIT2 timeout for ages (since 2.x times??).
In any case, the timeout these days is 60 seconds, so the 3 min
comment is wrong (and cost me a few minutes of my life when I was
debugging a FIN_WAIT2 related problem in a userspace application and
checked the kernel source for details).
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Remove occurrences of unused struct __vxge_hw_device pointer in functions
vxge_learn_mac() and vxge_rem_isr().
Detected by Coverity: CID 139839, CID 139842.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Raymond Wanyoike <raymond.wanyoike@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
ip rules with iif/oif references do not update:
(detach/attach) across interface renames.
Signed-off-by: Maciej Żenczykowski <maze@google.com> CC: Willem de Bruijn <willemb@google.com> CC: Eric Dumazet <edumazet@google.com> CC: Chris Davis <chrismd@google.com> CC: Carlo Contavalli <ccontavalli@google.com>
Google-Bug-Id: 12936021 Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
FX Le Bail [Fri, 7 Feb 2014 10:22:37 +0000 (11:22 +0100)]
ipv6: icmp6_send: fix Oops when pinging a not set up IPv6 peer on a sit tunnel
The patch 446fab59333dea91e54688f033dd8d788d0486fb ("ipv6: enable anycast addresses
as source addresses in ICMPv6 error messages") causes an Oops when pinging a not
set up IPv6 peer on a sit tunnel.
The problem is that ipv6_anycast_destination() uses unconditionally skb_dst(skb),
which is NULL in this case.
The solution is to use instead the ipv6_chk_acast_addr_src() function.
Here are the steps to reproduce it:
modprobe sit
ip link add sit1 type sit remote 10.16.0.121 local 10.16.0.249
ip l s sit1 up
ip -6 a a dev sit1 2001:1234::123 remote 2001:1234::121
ping6 2001:1234::121
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 17:03:03 +0000 (22:33 +0530)]
net: Mark functions as static in net/sunrpc/svc_xprt.c
Mark functions as static in net/sunrpc/svc_xprt.c because they are not
used outside this file.
This eliminates the following warning in net/sunrpc/svc_xprt.c:
net/sunrpc/svc_xprt.c:574:5: warning: no previous prototype for ‘svc_alloc_arg’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:615:18: warning: no previous prototype for ‘svc_get_next_xprt’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:694:6: warning: no previous prototype for ‘svc_add_new_temp_xprt’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 17:01:42 +0000 (22:31 +0530)]
net: Include appropriate header file in netfilter/nft_lookup.c
Include appropriate header file net/netfilter/nf_tables_core.h in
net/netfilter/nft_lookup.c because it has prototype declaration of
functions defined in net/netfilter/nft_lookup.c.
This eliminates the following warning in net/netfilter/nft_lookup.c:
net/netfilter/nft_lookup.c:133:12: warning: no previous prototype for ‘nft_lookup_module_init’ [-Wmissing-prototypes]
net/netfilter/nft_lookup.c:138:6: warning: no previous prototype for ‘nft_lookup_module_exit’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 16:59:14 +0000 (22:29 +0530)]
net: Move prototype declaration to header file include/net/net_namespace.h from net/ipx/af_ipx.c
Move prototype declaration of function to header file
include/net/net_namespace.h from net/ipx/af_ipx.c because they are used
by more than one file.
This eliminates the following warning in net/ipx/sysctl_net_ipx.c:
net/ipx/sysctl_net_ipx.c:33:6: warning: no previous prototype for ‘ipx_register_sysctl’ [-Wmissing-prototypes]
net/ipx/sysctl_net_ipx.c:38:6: warning: no previous prototype for ‘ipx_unregister_sysctl’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 16:57:41 +0000 (22:27 +0530)]
net: Move prototype declaration to header file include/net/datalink.h from net/ipx/af_ipx.c
Move prototype declarations of function to header file
include/net/datalink.h from net/ipx/af_ipx.c because they are used by
more than one file.
This eliminates the following warning in net/ipx/pe2.c:
net/ipx/pe2.c:20:24: warning: no previous prototype for ‘make_EII_client’ [-Wmissing-prototypes]
net/ipx/pe2.c:32:6: warning: no previous prototype for ‘destroy_EII_client’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 16:56:32 +0000 (22:26 +0530)]
net: Move prototype declaration to header file include/net/ipx.h from net/ipx/af_ipx.c
Move prototype declaration of functions to header file include/net/ipx.h
from net/ipx/af_ipx.c because they are used by more than one file.
This eliminates the following warning in
net/ipx/ipx_route.c:33:19: warning: no previous prototype for ‘ipxrtr_lookup’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:52:5: warning: no previous prototype for ‘ipxrtr_add_route’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:94:6: warning: no previous prototype for ‘ipxrtr_del_routes’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:149:5: warning: no previous prototype for ‘ipxrtr_route_skb’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:171:5: warning: no previous prototype for ‘ipxrtr_route_packet’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:261:5: warning: no previous prototype for ‘ipxrtr_ioctl’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 16:54:33 +0000 (22:24 +0530)]
net: Move prototype declaration to include/net/ipx.h from net/ipx/ipx_route.c
Move prototype definition of function to header file include/net/ipx.h
from net/ipx/ipx_route.c because they are used by more than one file.
This eliminates the following warning from net/ipx/af_ipx.c:
net/ipx/af_ipx.c:193:23: warning: no previous prototype for ‘ipxitf_find_using_net’ [-Wmissing-prototypes]
net/ipx/af_ipx.c:577:5: warning: no previous prototype for ‘ipxitf_send’ [-Wmissing-prototypes]
net/ipx/af_ipx.c:1219:8: warning: no previous prototype for ‘ipx_cksum’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 16:52:53 +0000 (22:22 +0530)]
net: Move prototype declaration to header file include/net/dn.h from net/decnet/af_decnet.c
Move prototype declaration of functions to header file include/net/dn.h
from net/decnet/af_decnet.c because they are used by more than one file.
This eliminates the following warning in net/decnet/af_decnet.c:
net/decnet/sysctl_net_decnet.c:354:6: warning: no previous prototype for ‘dn_register_sysctl’ [-Wmissing-prototypes]
net/decnet/sysctl_net_decnet.c:359:6: warning: no previous prototype for ‘dn_unregister_sysctl’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 16:50:09 +0000 (22:20 +0530)]
net: Move prototype declaration to appropriate header file from decnet/af_decnet.c
Move prototype declaration of functions to header file include/net/dn_route.h
from net/decnet/af_decnet.c because it is used by more than one file.
This eliminates the following warning in net/decnet/dn_route.c:
net/decnet/dn_route.c:629:5: warning: no previous prototype for ‘dn_route_rcv’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 14:56:25 +0000 (20:26 +0530)]
net: Mark functions as static in core/dev.c
Mark functions as static in core/dev.c because they are not used outside
this file.
This eliminates the following warning in core/dev.c:
net/core/dev.c:2806:5: warning: no previous prototype for ‘__dev_queue_xmit’ [-Wmissing-prototypes]
net/core/dev.c:4640:5: warning: no previous prototype for ‘netdev_adjacent_sysfs_add’ [-Wmissing-prototypes]
net/core/dev.c:4650:6: warning: no previous prototype for ‘netdev_adjacent_sysfs_del’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 14:32:16 +0000 (20:02 +0530)]
net: Include appropriate header file in caif/cfsrvl.c
Include appropriate header file net/caif/caif_dev.h in caif/cfsrvl.c
because it has prototype declaration of functions defined in
caif/cfsrvl.c.
This eliminates the following warning in caif/cfsrvl.c:
net/caif/cfsrvl.c:198:6: warning: no previous prototype for ‘caif_free_client’ [-Wmissing-prototypes]
net/caif/cfsrvl.c:208:6: warning: no previous prototype for ‘caif_client_register_refcnt’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 14:29:04 +0000 (19:59 +0530)]
net: Include appropriate header file in caif/caif_dev.c
Include appropriate header file net/caif/caif_dev.h in caif/caif_dev.c
because it has prototype declarations of function defined in
caif/caif_dev.c.
This eliminates the following file in caif/caif_dev.c:
net/caif/caif_dev.c:303:6: warning: no previous prototype for ‘caif_enroll_dev’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Rashika Kheria [Sun, 9 Feb 2014 14:27:33 +0000 (19:57 +0530)]
net: Mark function as static in 9p/client.c
Mark function as static in net/9p/client.c because it is not used
outside this file.
This eliminates the following warning in net/9p/client.c:
net/9p/client.c:207:18: warning: no previous prototype for ‘p9_fcall_alloc’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 9 Feb 2014 22:21:25 +0000 (14:21 -0800)]
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:
====================
Please pull this batch of fixes intended for the 3.14 stream!
For the mac80211 bits, Johannes says:
"This is just a collection of small fixes, the commit logs explain the
details. The only thing that isn't strictly a fix is the 5/10 MHz
enabling, I had forgotten this and there's little point in waiting
longer. The patch simply removes the force-disable code that I put in
when there was a problem with the userspace API (that has long been
fixed.)"
For the iwlwifi bits, Emmanuel says:
"I have an important fix that disables A band in case the driver thought
it was enabled, and the firmware disagreed. We ended up making the
firmware unhappy. I also fix the station table in AP mode and fix the
scan while we have BT working.
Johannes removes a static variable that could potentially lead to to
issues on multi-device setups and disables scheduled scan to avoid
issues with old versions of wpa_supplicant.
A small fix from David on scan and a few new device IDs for 7265."
On top of that...
Oleksij Rempel adds a USB ID to the ar5523 driver and changes the
default powersave setting for ath9k_htc to "off", due to observed
stability issues (based on an equivalent ath9k patch).
Stanislaw Gruszka similarly disables powersave for a couple of rt2x00
drivers. He also fixes a couple of scheduling while atomic issues
in ath9k_htc.
Sujith Manoharan rounds-out the powersave disables with one for ath9k.
He also fixes a build prolem with ath9k on ARM and fixes an ath9k Tx
power calculation.
Finally, Andrea Merello fixes a couple of lingering DMA mapping
problems in the rtl8180 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 9 Feb 2014 22:20:00 +0000 (14:20 -0800)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter/nftables/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes, mostly nftables
fixes, most relevantly they are:
* Fix a crash in the h323 conntrack NAT helper due to expectation list
corruption, from Alexey Dobriyan.
* A couple of RCU race fixes for conntrack, one manifests by hitting BUG_ON
in nf_nat_setup_info() and the destroy path, patches from Andrey Vagin and
me.
* Dump direction attribute in nft_ct only if it is set, from Arturo
Borrero.
* Fix IPVS bug in its own connection tracking system that may lead to
copying only 4 bytes of the IPv6 address when initializing the
ip_vs_conn object, from Michal Kubecek.
* Fix -EBUSY errors in nftables when deleting the rules, chain and tables
in a row due mixture of asynchronous and synchronous object releasing,
from me.
* Three fixes for the nf_tables set infrastructure when using intervals and
mappings, from me.
* Four patches to fixing the nf_tables log, reject and ct expressions from
the new inet table, from Patrick McHardy.
* Fix memory overrun in the map that is used to dynamically allocate names
from anonymous sets, also from Patrick.
* Fix a potential oops if you dump a set with NFPROTO_UNSPEC and a table
name, from Patrick McHardy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter: nft_rbtree: fix data handling of end interval elements
This patch fixes several things which related to the handling of
end interval elements:
* Chain use underflow with intervals and map: If you add a rule
using intervals+map that introduces a loop, the error path of the
rbtree set decrements the chain refcount for each side of the
interval, leading to a chain use counter underflow.
* Don't copy the data part of the end interval element since, this
area is uninitialized and this confuses the loop detection code.
* Don't allocate room for the data part of end interval elements
since this is unused.
So, after this patch the idea is that end interval elements don't
have a data part.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Patrick McHardy <kaber@trash.net>
Eric Dumazet [Thu, 6 Feb 2014 23:57:10 +0000 (15:57 -0800)]
tcp: remove 1ms offset in srtt computation
TCP pacing depends on an accurate srtt estimation.
Current srtt estimation is using jiffie resolution,
and has an artificial offset of at least 1 ms, which can produce
slowdowns when FQ/pacing is used, especially in DC world,
where typical rtt is below 1 ms.
We are planning a switch to usec resolution for linux-3.15,
but in the meantime, this patch removes the 1 ms offset.
All we need is to have tp->srtt minimal value of 1 to differentiate
the case of srtt being initialized or not, not 8.
The problematic behavior was observed on a 40Gbit testbed,
where 32 concurrent netperf were reaching 12Gbps of aggregate
speed, instead of line speed.
This patch also has the effect of reporting more accurate srtt and send
rates to iproute2 ss command as in :
Reported-by: Vytautas Valancius <valas@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Thu, 6 Feb 2014 23:00:52 +0000 (15:00 -0800)]
bridge: fix netconsole setup over bridge
Commit 93d8bf9fb8f3 ("bridge: cleanup netpoll code") introduced
a check in br_netpoll_enable(), but this check is incorrect for
br_netpoll_setup(). This patch moves the code after the check
into __br_netpoll_enable() and calls it in br_netpoll_setup().
For br_add_if(), the check is still needed.
Fixes: 93d8bf9fb8f3 ("bridge: cleanup netpoll code") Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Tested-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 6 Feb 2014 18:42:42 +0000 (10:42 -0800)]
net: use __GFP_NORETRY for high order allocations
sock_alloc_send_pskb() & sk_page_frag_refill()
have a loop trying high order allocations to prepare
skb with low number of fragments as this increases performance.
Problem is that under memory pressure/fragmentation, this can
trigger OOM while the intent was only to try the high order
allocations, then fallback to order-0 allocations.
We had various reports from unexpected regressions.
According to David, setting __GFP_NORETRY should be fine,
as the asynchronous compaction is still enabled, and this
will prevent OOM from kicking as in :
Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Thu, 6 Feb 2014 17:34:12 +0000 (18:34 +0100)]
netpoll: fix netconsole IPv6 setup
Currently, to make netconsole start over IPv6, the source address
needs to be specified. Without a source address, netpoll_parse_options
assumes we're setting up over IPv4 and the destination IPv6 address is
rejected.
Check if the IP version has been forced by a source address before
checking for a version mismatch when parsing the destination address.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/sfc/tx.c: In function 'efx_enqueue_skb':
drivers/net/ethernet/sfc/tx.c:432:1: warning: label 'finish_packet' defined but not used
Stick the label inside the same #ifdef that the code which calls
it uses. Note that this is only seen for arch that do not set
ARCH_HAS_IOREMAP_WC, such as arm, mips, sparc, ..., as the others
enable the write combining code and hence use the label.
Cc: Jon Cooper <jcooper@solarflare.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 6 Feb 2014 12:53:19 +0000 (15:53 +0300)]
hso: remove some dead code
It seems like this function was intended to have special handling for
urb statuses of -ENOENT and -ECONNRESET. But now it just prints some
debugging and returns at the start of the function.
I have removed the dead code, it's still in the git history if anyone
wants to revive it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
inet: defines IPPROTO_* needed for module alias generation
Commit cfd280c91253 ("net: sync some IP headers with glibc") changed a set of
define's to an enum (with no explanation why) which introduced a bug
in module mip6 where aliases are generated using the IPPROTO_* defines;
mip6 doesn't load if require_module called with the aliases from
xfrm_get_type().
Reverting this change back to define's to fix the aliases.
modinfo mip6 (before this change)
alias: xfrm-type-10-IPPROTO_DSTOPTS
alias: xfrm-type-10-IPPROTO_ROUTING
modinfo mip6 (after this change)
alias: xfrm-type-10-43
alias: xfrm-type-10-60
Signed-off-by: Jan Moskyto Matejka <mq@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
net: sctp: fix initialization of local source address on accepted ipv6 sockets
commit efe4208f47f907b86f528788da711e8ab9dea44d:
'ipv6: make lookups simpler and faster' broke initialization of local source
address on accepted ipv6 sockets. Before the mentioned commit receive address
was copied along with the contents of ipv6_pinfo in sctp_v6_create_accept_sk.
Now when it is moved, it has to be copied separately.
This also fixes lksctp's ipv6 regression in a sense that test_getname_v6, TC5 -
'getsockname on a connected server socket' now passes.
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nsn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hayeswang [Thu, 6 Feb 2014 03:55:48 +0000 (11:55 +0800)]
r8152: fix the submission of the interrupt transfer
The submission of the interrupt transfer should be done after setting
the bit of WORK_ENABLE, otherwise the callback function would have
the opportunity to be returned directly.
Clear the bit of WORK_ENABLE before killing the interrupt transfer.
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Wed, 5 Feb 2014 14:07:12 +0000 (16:07 +0200)]
bnx2x: Allow VF rss on higher PFs
bnx2x driver uses incorrect PF identifier to configure (in HW) the VF
interrupt scheme; As a result, in multi-function mode the configuration
for PFs with a high index (4+) will overflow and the PF will erroneously
configure a single ISR scheme for its VFs.
As a result, if such a VF uses multiple queues, interrupt generation will
stop after VF receives an Rx packet or sends a Tx packet on a queue
other than queue[0].
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nithin Sujir [Thu, 6 Feb 2014 22:13:05 +0000 (14:13 -0800)]
tg3: Fix deadlock in tg3_change_mtu()
Quoting David Vrabel -
"5780 cards cannot have jumbo frames and TSO enabled together. When
jumbo frames are enabled by setting the MTU, the TSO feature must be
cleared. This is done indirectly by calling netdev_update_features()
which will call tg3_fix_features() to actually clear the flags.
netdev_update_features() will also trigger a new netlink message for the
feature change event which will result in a call to tg3_get_stats64()
which deadlocks on the tg3 lock."
tg3_set_mtu() does not need to be under the tg3 lock since converting
the flags to use set_bit(). Move it out to after tg3_netif_stop().
Reported-by: David Vrabel <david.vrabel@citrix.com> Tested-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 5 Feb 2014 13:29:21 +0000 (16:29 +0300)]
tg3: cleanup an error path in tg3_phy_reset_5703_4_5()
In the original code, if tg3_readphy() fails then it does an unnecessary
check to verify "err" is still zero and then returns -EBUSY.
My static checker complains about the unnecessary "if (!err)" check and
anyway it is better to propagate the -EBUSY error code from
tg3_readphy() instead of hard coding it here. And really the original
code is confusing to look at.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Apparently commit 5c766d642bcaffd0c2a5b354db2068515b3846cf ("ipv4:
introduce address lifetime") forgot to take into account the addition of
struct ifa_cacheinfo in inet_nlmsg_size(). Hence add it, like is already
done for ipv6.
Suggested-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes old and unsupported CLPS711X IrDA driver.
Support for IrDA for CLPS711X serial port now provided by commit 4a33f1f59abd (serial: clps711x: Add support for N_IRDA line
discipline), so IrDA-mode can be turned ON with "irattach" tool
through "irtty" driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Ripard [Sun, 2 Feb 2014 13:49:12 +0000 (14:49 +0100)]
net: phy: sunxi: Add new compatibles
The Allwinner A10 compatibles were following a slightly different compatible
patterns than the rest of the SoCs for historical reasons. Add compatibles
matching the other pattern to the mdio driver for consistency, and keep the
older one for backward compatibility.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Ripard [Sun, 2 Feb 2014 13:49:11 +0000 (14:49 +0100)]
net: ethernet: sunxi: Add new compatibles
The Allwinner A10 compatibles were following a slightly different compatible
patterns than the rest of the SoCs for historical reasons. Add compatibles
matching the other pattern to the ethernet driver for consistency, and keep the
older one for backward compatibility.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
andrea.merello [Wed, 5 Feb 2014 21:38:05 +0000 (22:38 +0100)]
rtl8180: Add error check for pci_map_single return value in RX path
In original code the old RX DMA buffer is unmapped and processed and at the end
of the isr a new buffer is mapped with pci_map_single and attached to the RX
descriptor.
If pci_map_single fails then the RX descriptor remains with no valid DMA buffer
attached.
In this condition the DMA will target where it shouldn't with obvious evil
consequences.
Simply avoiding re-arming the descriptor will prevent buggy DMA but it will
result soon in RX stuck.
This patch move the DMA mapping of the new buffer at the beginning of the ISR
(and it adds error check for pci_map_single success/fail).
If the DMA mapping fails then we do not unmap the old buffer and we re-arm the
descriptor without processing it, with the old DMA buffer still attached.
In this way we lose the currently RX-ed packet, but whenever next calls to
pci_map_single will succeed again,then the RX process will go on without stuck.
Signed-off-by: andrea merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
We may lost race if we flush the rule-set (which happens asynchronously
via call_rcu) and we try to remove the table (that userspace assumes
to be empty).
Fix this by recovering synchronous rule and chain deletion. This was
introduced time ago before we had no batch support, and synchronous
rule deletion performance was not good. Now that we have the batch
support, we can just postpone the purge of old rule in a second step
in the commit phase. All object deletions are synchronous after this
patch.
As a side effect, we save memory as we don't need rcu_head per rule
anymore.
Cc: Patrick McHardy <kaber@trash.net> Reported-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Patrick McHardy [Thu, 6 Feb 2014 09:17:41 +0000 (09:17 +0000)]
netfilter: nf_tables: fix log/queue expressions for NFPROTO_INET
The log and queue expressions both store the family during ->init() and
use it to deliver packets. This is wrong when used in NFPROTO_INET since
they should both deliver to the actual AF of the packet, not the dummy
NFPROTO_INET.
Use the family from the hook ops to fix this.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Johannes Berg [Fri, 31 Jan 2014 23:16:23 +0000 (00:16 +0100)]
mac80211: fix fragmentation code, particularly for encryption
The "new" fragmentation code (since my rewrite almost 5 years ago)
erroneously sets skb->len rather than using skb_trim() to adjust
the length of the first fragment after copying out all the others.
This leaves the skb tail pointer pointing to after where the data
originally ended, and thus causes the encryption MIC to be written
at that point, rather than where it belongs: immediately after the
data.
The impact of this is that if software encryption is done, then
a) encryption doesn't work for the first fragment, the connection
becomes unusable as the first fragment will never be properly
verified at the receiver, the MIC is practically guaranteed to
be wrong
b) we leak up to 8 bytes of plaintext (!) of the packet out into
the air
This is only mitigated by the fact that many devices are capable
of doing encryption in hardware, in which case this can't happen
as the tail pointer is irrelevant in that case. Additionally,
fragmentation is not used very frequently and would normally have
to be configured manually.
Sujith Manoharan [Thu, 30 Jan 2014 08:47:28 +0000 (14:17 +0530)]
mac80211: Fix IBSS disconnect
Currently, when a station leaves an IBSS network, the
corresponding BSS is not dropped from cfg80211 if there are
other active stations in the network. But, the small
window that is present when trying to determine a station's
status based on IEEE80211_IBSS_MERGE_INTERVAL introduces
a race.
Instead of trying to keep the BSS, always remove it when
leaving an IBSS network. There is not much benefit to retain
the BSS entry since it will be added with a subsequent join
operation.
This fixes an issue where a dangling BSS entry causes ath9k
to wait for a beacon indefinitely.
Cc: <stable@vger.kernel.org> Reported-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Wed, 22 Jan 2014 09:14:19 +0000 (11:14 +0200)]
cfg80211: send scan results from work queue
Due to the previous commit, when a scan finishes, it is in theory
possible to hit the following sequence:
1. interface starts being removed
2. scan is cancelled by driver and cfg80211 is notified
3. scan done work is scheduled
4. interface is removed completely, rdev->scan_req is freed,
event sent to userspace but scan done work remains pending
5. new scan is requested on another virtual interface
6. scan done work runs, freeing the still-running scan
To fix this situation, hang on to the scan done message and block
new scans while that is the case, and only send the message from
the work function, regardless of whether the scan_req is already
freed from interface removal. This makes step 5 above impossible
and changes step 6 to be
5. scan done work runs, sending the scan done message
As this can't work for wext, so we send the message immediately,
but this shouldn't be an issue since we still return -EBUSY.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Wed, 22 Jan 2014 09:14:18 +0000 (11:14 +0200)]
cfg80211: fix scan done race
When an interface/wdev is removed, any ongoing scan should be
cancelled by the driver. This will make it call cfg80211, which
only queues a work struct. If interface/wdev removal is quick
enough, this can leave the scan request pending and processed
only after the interface is gone, causing a use-after-free.
Fix this by making sure the scan request is not pending after
the interface is destroyed. We can't flush or cancel the work
item due to locking concerns, but when it'll run it shouldn't
find anything to do. This leaves a potential issue, if a new
scan gets requested before the work runs, it prematurely stops
the running scan, potentially causing another crash. I'll fix
that in the next patch.
This was particularly observed with P2P_DEVICE wdevs, likely
because freeing them is quicker than freeing netdevs.
Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Fixes: 4a58e7c38443 ("cfg80211: don't "leak" uncompleted scans") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
sdata->u.ap.request_smps_work can’t be flushed synchronously
under wdev_lock(wdev) since ieee80211_request_smps_ap_work
itself locks the same lock.
While at it, reset the driver_smps_mode when the ap is
stopped to its default: OFF.
This solves:
======================================================
[ INFO: possible circular locking dependency detected ]
3.12.0-ipeer+ #2 Tainted: G O
-------------------------------------------------------
rmmod/2867 is trying to acquire lock:
((&sdata->u.ap.request_smps_work)){+.+...}, at: [<c105b8d0>] flush_work+0x0/0x90
but task is already holding lock:
(&wdev->mtx){+.+.+.}, at: [<f9b32626>] cfg80211_stop_ap+0x26/0x230 [cfg80211]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
Johannes Berg [Thu, 23 Jan 2014 15:32:29 +0000 (16:32 +0100)]
cfg80211: re-enable 5/10 MHz support
Unfortunately I forgot this during the merge window, but the
patch seems small enough to go in as a fix. The userspace API
bug that was the reason for disabling it has long been fixed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pontus Fuchs [Thu, 16 Jan 2014 14:00:40 +0000 (15:00 +0100)]
nl80211: Reset split_start when netlink skb is exhausted
When the netlink skb is exhausted split_start is left set. In the
subsequent retry, with a larger buffer, the dump is continued from the
failing point instead of from the beginning.
This was causing my rt28xx based USB dongle to now show up when
running "iw list" with an old iw version without split dump support.
Cc: stable@vger.kernel.org Fixes: 3713b4e364ef ("nl80211: allow splitting wiphy information in dumps") Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
[avoid the entire workaround when state->split is set] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Eliad Peller [Sun, 12 Jan 2014 09:06:37 +0000 (11:06 +0200)]
mac80211: move roc cookie assignment earlier
ieee80211_start_roc_work() might add a new roc
to existing roc, and tell cfg80211 it has already
started.
However, this might happen before the roc cookie
was set, resulting in REMAIN_ON_CHANNEL (started)
event with null cookie. Consequently, it can make
wpa_supplicant go out of sync.
Fix it by setting the roc cookie earlier.
Cc: stable@vger.kernel.org Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Patrick McHardy [Wed, 5 Feb 2014 15:03:38 +0000 (15:03 +0000)]
netfilter: nft_reject: split up reject module into IPv4 and IPv6 specifc parts
Currently the nft_reject module depends on symbols from ipv6. This is
wrong since no generic module should force IPv6 support to be loaded.
Split up the module into AF-specific and a generic part.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David S. Miller [Thu, 6 Feb 2014 00:25:53 +0000 (16:25 -0800)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch
Jesse Gross says:
====================
Open vSwitch
A handful of bug fixes for net/3.14. High level fixes are:
* Regressions introduced by the zerocopy changes, particularly with
old userspaces.
* A few bugs lingering from the introduction of megaflows.
* Overly zealous error checking that is now being triggered frequently
in common cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Zoltan Kiss [Tue, 4 Feb 2014 19:54:37 +0000 (19:54 +0000)]
xen-netback: Fix Rx stall due to race condition
The recent patch to fix receive side flow control
(11b57f90257c1d6a91cee720151b69e0c2020cf6: xen-netback: stop vif thread
spinning if frontend is unresponsive) solved the spinning thread problem,
however caused an another one. The receive side can stall, if:
- [THREAD] xenvif_rx_action sets rx_queue_stopped to true
- [INTERRUPT] interrupt happens, and sets rx_event to true
- [THREAD] then xenvif_kthread sets rx_event to false
- [THREAD] rx_work_todo doesn't return true anymore
Also, if interrupt sent but there is still no room in the ring, it take quite a
long time until xenvif_rx_action realize it. This patch ditch that two variable,
and rework rx_work_todo. If the thread finds it can't fit more skb's into the
ring, it saves the last slot estimation into rx_last_skb_slots, otherwise it's
kept as 0. Then rx_work_todo will check if:
- there is something to send to the ring (like before)
- there is space for the topmost packet in the queue
I think that's more natural and optimal thing to test than two bool which are
set somewhere else.
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Wed, 5 Feb 2014 15:03:37 +0000 (15:03 +0000)]
netfilter: nf_tables: add AF specific expression support
For the reject module, we need to add AF-specific implementations to
get rid of incorrect module dependencies. Try to load an AF-specific
module first and fall back to generic modules.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Patrick McHardy [Wed, 5 Feb 2014 15:03:35 +0000 (15:03 +0000)]
netfilter: nf_tables: fix potential oops when dumping sets
Commit c9c8e48597 (netfilter: nf_tables: dump sets in all existing families)
changed nft_ctx_init_from_setattr() to only look up the address family if it
is not NFPROTO_UNSPEC. However if it is NFPROTO_UNSPEC and a table attribute
is given, nftables_afinfo_lookup() will dereference the NULL afi pointer.
Fix by checking for non-NULL afi and also move a check added by that commit
to the proper position.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_conntrack: don't release a conntrack with non-zero refcnt
With this patch, the conntrack refcount is initially set to zero and
it is bumped once it is added to any of the list, so we fulfill
Eric's golden rule which is that all released objects always have a
refcount that equals zero.
Andrey Vagin reports that nf_conntrack_free can't be called for a
conntrack with non-zero ref-counter, because it can race with
nf_conntrack_find_get().
A conntrack slab is created with SLAB_DESTROY_BY_RCU. Non-zero
ref-counter says that this conntrack is used. So when we release
a conntrack with non-zero counter, we break this assumption.
CPU1 CPU2
____nf_conntrack_find()
nf_ct_put()
destroy_conntrack()
...
init_conntrack
__nf_conntrack_alloc (set use = 1)
atomic_inc_not_zero(&ct->use) (use = 2)
if (!l4proto->new(ct, skb, dataoff, timeouts))
nf_conntrack_free(ct); (use = 2 !!!)
...
__nf_conntrack_alloc (set use = 1)
if (!nf_ct_key_equal(h, tuple, zone))
nf_ct_put(ct); (use = 0)
destroy_conntrack()
/* continue to work with CT */
After applying the path "[PATCH] netfilter: nf_conntrack: fix RCU
race in nf_conntrack_find_get" another bug was triggered in
destroy_conntrack():
I have reused the original title for the RFC patch that Andrey posted and
most of the original patch description.
Cc: Eric Dumazet <edumazet@google.com> Cc: Andrew Vagin <avagin@parallels.com> Cc: Florian Westphal <fw@strlen.de> Reported-by: Andrew Vagin <avagin@parallels.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Andrew Vagin <avagin@parallels.com>
net->ct.nf_conntrack_cachep is created with SLAB_DESTROY_BY_RCU.
The hash is protected by rcu, so readers look up conntracks without
locks.
A conntrack is removed from the hash, but in this moment a few readers
still can use the conntrack. Then this conntrack is released and another
thread creates conntrack with the same address and the equal tuple.
After this a reader starts to validate the conntrack:
* It's not dying, because a new conntrack was created
* nf_ct_tuple_equal() returns true.
But this conntrack is not initialized yet, so it can not be used by two
threads concurrently. In this case BUG_ON may be triggered from
nf_nat_setup_info().
Florian Westphal suggested to check the confirm bit too. I think it's
right.
task 1 task 2 task 3
nf_conntrack_find_get
____nf_conntrack_find
destroy_conntrack
hlist_nulls_del_rcu
nf_conntrack_free
kmem_cache_free
__nf_conntrack_alloc
kmem_cache_alloc
memset(&ct->tuplehash[IP_CT_DIR_MAX],
if (nf_ct_is_dying(ct))
if (!nf_ct_tuple_equal()
I'm not sure, that I have ever seen this race condition in a real life.
Currently we are investigating a bug, which is reproduced on a few nodes.
In our case one conntrack is initialized from a few tasks concurrently,
we don't have any other explanation for this.
Patrick McHardy [Sat, 25 Jan 2014 08:04:07 +0000 (08:04 +0000)]
netfilter: nf_tables: fix oops when deleting a chain with references
The following commands trigger an oops:
# nft -i
nft> add table filter
nft> add chain filter input { type filter hook input priority 0; }
nft> add chain filter test
nft> add rule filter input jump test
nft> delete chain filter test
We need to check the chain use counter before allowing destruction since
we might have references from sets or jump rules.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=69341 Reported-by: Matthew Ife <deleriux1@gmail.com> Tested-by: Matthew Ife <deleriux1@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Arturo Borrero [Fri, 17 Jan 2014 01:28:45 +0000 (02:28 +0100)]
netfilter: nft_ct: fix unconditional dump of 'dir' attr
We want to make sure that the information that we get from the kernel can
be reinjected without troubles. The kernel shouldn't return an attribute
that is not required, or even prohibited.
Dumping unconditionally NFTA_CT_DIRECTION could lead an application in
userspace to interpret that the attribute was originally set, while it
was not.
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Andy Zhou [Mon, 3 Feb 2014 01:08:06 +0000 (17:08 -0800)]
openvswitch: Suppress error messages on megaflow updates
With subfacets, we'd expect megaflow updates message to carry
the original micro flow. If not, EINVAL is returned and kernel
logs an error message. Now that the user space subfacet layer is
removed, it is expected that flow updates can arrive with a
micro flow other than the original. Change the return code to
EEXIST and remove the kernel error log message.
Reported-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
Pravin B Shelar [Fri, 31 Jan 2014 17:43:23 +0000 (09:43 -0800)]
openvswitch: Fix ovs_flow_free() ovs-lock assert.
ovs_flow_free() is not called under ovs-lock during packet
execute path (ovs_packet_cmd_execute()). Since packet execute
does not touch flow->mask, there is no need to take that
lock either. So move assert in case where flow->mask is checked.
Found by code inspection.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
commit 43d4be9cb55f3bac5253e9289996fd9d735531db (openvswitch: Allow user space
to announce ability to accept unaligned Netlink messages) introduced
OVS_DP_ATTR_USER_FEATURES netlink attribute in datapath responses,
but the attribute size was not taken into account in ovs_dp_cmd_msg_size().
Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
Andy Zhou [Tue, 21 Jan 2014 17:31:04 +0000 (09:31 -0800)]
openvswitch: Fix kernel panic on ovs_flow_free
Both mega flow mask's reference counter and per flow table mask list
should only be accessed when holding ovs_mutex() lock. However
this is not true with ovs_flow_table_flush(). The patch fixes this bug.
Reported-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
Thomas Graf [Tue, 14 Jan 2014 16:27:49 +0000 (16:27 +0000)]
openvswitch: Pad OVS_PACKET_ATTR_PACKET if linear copy was performed
While the zerocopy method is correctly omitted if user space
does not support unaligned Netlink messages. The attribute is
still not padded correctly as skb_zerocopy() will not ensure
padding and the attribute size is no longer pre calculated
though nla_reserve() which ensured padding previously.
This patch applies appropriate padding if a linear data copy
was performed in skb_zerocopy().
Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: Jesse Gross <jesse@nicira.com>