Dave Airlie [Mon, 4 Aug 2014 07:57:34 +0000 (17:57 +1000)]
Merge tag 'drm-intel-next-2014-07-25-merged' of git://anongit.freedesktop.org/drm-intel into drm-next
Final feature pull for 3.17.
drm-intel-next-2014-07-25:
- Ditch UMS support (well just the config option for now)
- Prep work for future platforms (Sonika Jindal, Damien)
- runtime pm/soix fixes (Paulo, Jesse)
- psr tracking improvements, locking fixes, now enabled by default!
- rps fixes for chv (Deepak, Ville)
- drm core patches for rotation support (Ville, Sagar Kamble) - the i915 parts
unfortunately didn't make it yet
- userptr fixes (Chris)
- minimum backlight brightness (Jani), acked long ago by Matthew Garret on irc -
I've forgotten about this patch :(
QA is a bit unhappy about the DP MST stuff since it broke hpd testing a
bit, but otherwise looks sane. I've backmerged drm-next to resolve
conflicts with the mst stuff, which means the new tag itself doesn't
contain the overview as usual.
* tag 'drm-intel-next-2014-07-25-merged' of git://anongit.freedesktop.org/drm-intel: (75 commits)
drm/i915/userptr: Keep spin_lock/unlock in the same block
drm/i915: Allow overlapping userptr objects
drm/i915: Ditch UMS config option
drm/i915: respect the VBT minimum backlight brightness
drm/i915: extract backlight minimum brightness from VBT
drm/i915: Replace HAS_PCH_SPLIT which incorrectly lets some platforms in
drm/i915: Returning from increase/decrease of pllclock when invalid
drm/i915: Setting legacy palette correctly for different platforms
drm/i915: Avoid incorrect returning for some platforms
drm/i915: Writing proper check for reading of pipe status reg
drm/i915: Returning the right VGA control reg for platforms
drm/i915: Allowing changing of wm latencies for valid platforms
drm/i915: Adding HAS_GMCH_DISPLAY macro
drm/i915: Fix possible overflow when recording semaphore states.
drm/i915: Do not unmap object unless no other VMAs reference it
drm/i915: remove plane/cursor/pipe assertions from intel_crtc_disable
drm/i915: Reorder ctx unref on ppgtt cleanup
drm/i915/error: Check the potential ctx obj's vm
drm/i915: Fix printing proper min/min/rpe values in debugfs
drm/i915: BDW can also detect unclaimed registers
...
Dave Airlie [Thu, 24 Jul 2014 01:53:45 +0000 (11:53 +1000)]
drm: close race in connector registration (v2)
Daniel pointed out with hotplug that userspace could be trying to oops us
as root for lols, and that to be correct we shouldn't register the object
with the idr before we have fully set the connector object up.
His proposed solution was a lot more life changing, this seemed like a simpler
proposition to me, get the connector object id from the idr, but don't
register the object until the drm_connector_register callback.
The open question is whether the drm_mode_object_register needs a bigger lock
than just the idr one, but I can't see why it would, but I can be locking
challenged.
v2: fix bool noreg into sane - add comment.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Chris Wilson [Mon, 4 Aug 2014 06:15:09 +0000 (07:15 +0100)]
drm/i915: only hook up hpd pulse for DP outputs
On HSW+, the digital encoders are shared between HDMI and DP outputs,
with one encoder masquerading as both. The VBT should tell us if we need
to have DP or HDMI support on a particular port, but if we don't have DP
support and we enable the DP hpd pulse handler then we cause an oops.
Don't hook up the DP hpd handling if we don't have a DP port.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81856 Reported-by: Intel QA Team. Signed-off-by: Dave Airlie <airlied@redhat.com> # v1
[ickle: Fix the error handling after a malloc failure] Reviewed-by: Dave Airlie <airlied@redhat.com> Cc: Paulo Zanoni <przanoni@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 4 Aug 2014 05:07:21 +0000 (15:07 +1000)]
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
This pull request includes i80 interface support, module auto-loading
ipp consolidation, and trivail fixups and cleanups.
Summary:
- Add i80 interface support. For this, we added some features to
Exynos drm framework, which don't affect any other SoC and common
framework because they are specific to Exynos drm.
- Add module auto-loading support. For this, sub drivers of Exynos drm
exports their of match tables to userspace. This allows modules to be
loaded automatically based on devicetree information
- Consolidate ipp driver. This patch just just includes cleanups and
a littl bit refactoring codes.
If there is any problem, please kindly let me know.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (38 commits)
drm/exynos: g2d: let exynos_g2d_get_ver_ioctl fail
drm/exynos: g2d: make ioctls more robust
drm/exynos: hdmi: add null check for hdmiphy_port
drm/exynos: control blending of mixer graphic layer 0
drm/exynos: Add MODULE_DEVICE_TABLE entries for various components
Subject: Revert "drm/exynos: remove MODULE_DEVICE_TABLE definitions"
Subject: Revert "drm/exynos: fix module build error"
drm/exynos/ipp: simplify ipp_find_driver
drm/exynos/ipp: simplify ipp_create_id
drm/exynos/ipp: remove redundant messages
drm/exynos/ipp: simplify ipp_find_obj
drm/exynos/ipp: remove useless registration checks
drm/exynos/ipp: simplify memory check function
drm/exynos/ipp: remove incorrect checks of list_first_entry result
drm/exynos/ipp: remove temporary variable
drm/exynos/ipp: correct address type
drm/exynos/ipp: remove struct exynos_drm_ipp_private
drm/exynos/ipp: remove unused field from exynos_drm_ipp_private
drm/exynos/ipp: remove type casting
drm/exynos: g2d: add exynos4212 as a compatible device.
...
drm/exynos: g2d: let exynos_g2d_get_ver_ioctl fail
Currently the DRM_IOCTL_EXYNOS_G2D_GET_VER ioctl always succeeds, even
if no G2D support is available. Let the ioctl fail when this is the
case, so that userspace can accurately probe for G2D support.
This also fixes the exynos tests in libdrm. There 'g2d_init' doesn't
fail when G2D is absent, leading to a segfault later.
Both exynos_g2d_set_cmdlist_ioctl and exynos_g2d_exec_ioctl don't check
if the G2D was succesfully probe. If that is not the case, then g2d_priv
is just NULL and extracting 'dev' from it in the next step is going to
produce a kernel oops.
Add proper checks and return ENODEV if the G2D is not available.
drm/exynos: control blending of mixer graphic layer 0
The mixer graphic layer 0 isn't blended as default by commit 0377f4ed9f1aed30292c4e3c87f24e028ae26f36(drm/exynos: Don't blend mixer
layer 0). But it needs to be blended with graphic layer 0 if video layer
is enabled by vp because video layer is bottom.
drm/exynos: Add MODULE_DEVICE_TABLE entries for various components
Add MODULE_DEVICE_TABLE calls for the various OF match tables that
currently don't have one. This allows the module to be
autoloaded based on devicetree information.
This reverts commit d089621896c3530a9bd309f96e9c9124d07f6c3f was
original to prevent multiple MODULE_DEVICE_TABLE in one module.
Which, as a side-effect broke autoloading of the module.
Since 21bdd17b21b45ea48e06e23918d681afbe0622e9 it is possible to have
multiple calls to MODULE_DEVICE_TABLE, so the patch can be
reverted to restore support for autoloading
Since 21bdd17b21b45ea48e06e23918d681afbe0622e9 it is possible to have
multiple calls to MODULE_DEVICE_TABLE, so the patch can be
reverted to restore support for autoloading
Andrzej Hajda [Thu, 3 Jul 2014 13:10:31 +0000 (15:10 +0200)]
drm/exynos/ipp: remove incorrect checks of list_first_entry result
list_first_entry does not return NULL on empty list so this check
does not make sense. Moreover there is already code which prevents calling
list_first_entry on empty lists.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Thu, 17 Jul 2014 09:01:23 +0000 (18:01 +0900)]
drm/exynos: dsi: add driver data to support Exynos5410/5420/5440 SoCs
The offset of register DSIM_PLLTMR_REG in Exynos5410 / 5420 / 5440
SoCs is different from the one in Exynos4 SoCs.
In case of Exynos5410 / 5420 / 5440 SoCs, there is no frequency
band bit in DSIM_PLLCTRL_REG, and it uses DSIM_PHYCTRL_REG and
DSIM_PHYTIMING*_REG instead.
So this patch adds driver data to distinguish it.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Thu, 17 Jul 2014 09:01:21 +0000 (18:01 +0900)]
drm/exynos: fimd: support LCD I80 interface
To support MIPI command mode based I80 interface panel,
FIMD should do followings:
- Sets LCD I80 interface timings configuration.
- Uses "lcd_sys" as an IRQ resource and sets relevant IRQ configuration.
- Sets LCD block configuration for I80 interface.
- Sets ideal(pixel) clock is 2 times faster than the original one
to generate frame done IRQ prior to the next TE signal.
- Implements trigger feature that transfers image data if there is page
flip request, and implements TE handler to call trigger function.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Tue, 22 Jul 2014 10:49:44 +0000 (19:49 +0900)]
drm/exynos: dsi: add TE interrupt handler to support LCD I80 interface
This is a temporary solution and should be made by more
generic way.
To support LCD I80 interface, the DSI host should register
TE interrupt handler from the TE GPIO of attached panel.
So the panel generates a tearing effect synchronization signal
then the DSI host calls the CRTC device manager to trigger
to transfer video image.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Thu, 17 Jul 2014 09:01:19 +0000 (18:01 +0900)]
drm/exynos: add TE handler to support LCD I80 interface
To support LCD I80 interface, the panel should generate
Tearing Effect synchronization signal between MCU and FB
to display video images.
And the display controller should trigger to transfer
video image at this signal.
So the panel receives the TE IRQ, then calls these handler
chains to notify it to the display controller.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Thu, 17 Jul 2014 09:01:17 +0000 (18:01 +0900)]
drm/exynos: use wait_event_timeout() for safety usage
There could be the case that the page flip operation isn't finished correctly
with some abnormal condition such as panel reset. So this patch replaces
wait_event() with wait_event_timeout() to avoid waiting for page flip completion
infinitely.
And clears exynos_crtc->pending_flip in exynos_drm_crtc_page_flip()
when exynos_drm_crtc_mode_set_commit() is failed.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/exynos: hdmi: enable exynos 4210 and 4x12 soc support
Configuration sets for Exynos 4210 and 4x12 SoC were already defined in
Exynos HDMI and Mixed drivers, but they lacked proper linking to device
tree 'compatible' values. This patch fixes this issue adding support for
following compatible values: samsung,exynos4210-mixer,
samsung,exynos4212-mixer and samsung,exynos4210-hdmi. It also corrects
access to sclk_mixer clock, which is available only on Exynos 4210.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/exynos: hdmi: make 'hdmi-en' regulator optional and keep it enabled
HDMI_EN regulator is additional regulator for providing voltage source
for DCC lines available on HDMI connector. When there is no power
provided for DDC epprom, some TV-sets do not pulls up HPD (hot plug
detect) line, what causes HDMI block to stay turned off. This patch
enables HDMI_EN regulator (if available) on driver probe and keep it
enabled all the time to let TV-set correctly signal HPD event.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/exynos: Fix NULL pointer exception when suspending without components
Fix a NULL pointer exception when main exynos drm driver was probed
successfully but no components were added (e.g. by incomplete DTS). In
such case the exynos_drm_load() is never called and drvdata is NULL.
The NULL pointer exception may theoretically also happen as a effect of race between
adding components and main driver: if suspend of the driver happens
before adding components.
David Herrmann [Wed, 23 Jul 2014 15:26:37 +0000 (17:26 +0200)]
drm: drop unused "struct drm_queue"
This object is unused, drop it.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
David Herrmann [Wed, 23 Jul 2014 15:26:36 +0000 (17:26 +0200)]
drm: remove unused "struct drm_freelist"
This object is not used except for static fields in drm_bufs *cough*.
Inline the watermark fields and drop the unused structure definition.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
drm/rcar-du: Fix maximum frame buffer pitch computation
The maximum pitch constraint for the hardware is expressed in pixels.
Convert it to bytes to validate frame buffer creation, as frame buffer
pitches are expressed in bytes.
Reported-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Tue, 29 Jul 2014 18:49:36 +0000 (20:49 +0200)]
Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next
Pull in drm-next with Dave's DP MST support so that I can merge some
conflicting patches which also touch the driver load sequencing around
interrupt handling.
Chris Wilson [Thu, 24 Jul 2014 12:28:44 +0000 (13:28 +0100)]
drm/i915/userptr: Keep spin_lock/unlock in the same block
Move the code around in order to acquire and release the spinlock in the
same function and in the same block. This keeps static analysers happy
and the reader sane.
Suggested-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 21 Jul 2014 12:21:23 +0000 (13:21 +0100)]
drm/i915: Allow overlapping userptr objects
Whilst I strongly advise against doing so for the implicit coherency
issues between the multiple buffer objects accessing the same backing
store, it nevertheless is a valid use case, akin to mmaping the same
file multiple times.
The reason why we forbade it earlier was that our use of the interval
tree for fast invalidation upon vma changes excluded overlapping
objects. So in the case where the user wishes to create such pairs of
overlapping objects, we degrade the range invalidation to walkin the
linear list of objects associated with the mm.
A situation where overlapping objects could arise is the lax implementation
of MIT-SHM Pixmaps in the xserver. A second situation is where the user
wishes to have different access modes to a region of memory (e.g. access
through a read-only userptr buffer and through a normal userptr buffer).
v2: Compile for mmu-notifiers after tweaking
v3: Rename is_linear/has_linear
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Li, Victor Y" <victor.y.li@intel.com> Cc: "Kelley, Sean V" <sean.v.kelley@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Gong, Zhipeng" <zhipeng.gong@intel.com> Cc: Akash Goel <akash.goel@intel.com> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thus far no regression report yet, so the transparent fallback plan
seems to pan out.
Cc: Dave Airlie <airlied@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Suggested-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Wed, 23 Jul 2014 04:26:12 +0000 (14:26 +1000)]
drm/i915: fix initial fbdev setup warnings
This chunk was no longer required from what I can see, or
at least it is doing the wrong thing, as I confused
intel_connector->encoder and connector->encoder. Drop it
for now, to remove the warnings at bootup.
Jani Nikula [Tue, 24 Jun 2014 15:27:40 +0000 (18:27 +0300)]
drm/i915: respect the VBT minimum backlight brightness
Historically we've exposed the full backlight PWM duty cycle range to
the userspace, in the name of "mechanism, not policy". However, it turns
out there are both panels and board designs where there is a minimum
duty cycle that is required for proper operation. The minimum duty cycle
is available in the VBT.
The backlight class sysfs interface does not make any promises to the
userspace about the physical meaning of the range
0..max_brightness. Specifically there is no guarantee that 0 means off;
indeed for acpi_backlight 0 usually is not off, but the minimum
acceptable value.
Respect the minimum backlight, and expose the range acceptable to the
hardware as 0..max_brightness to the userspace via the backlight class
device; 0 means the minimum acceptable enabled value. To switch off the
backlight, the user must disable the encoder.
As a side effect, make the backlight class device max brightness and
physical PWM modulation frequency (i.e. max duty cycle)
independent. This allows a follow-up patch to virtualize the max value
exposed to the userspace.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: s/BUG_ON/WARN_ON/] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Fix possible overflow when recording semaphore states.
semaphore _sync_seqno, _seqno and _mbox are smaller than number of rings.
This optimization is to remove the ring itself from the list and the logic to do that
is at intel_ring_sync_index as below:
v2: Skip when from == to (Damien).
v3: avoid computing idx when from == to (Damien).
use ring == to instead of ring->id == to->id (Damien).
use continue instead of return (Rodrigo).
v4: avoid all unecessary computation (Damien).
reduce idx to loop scope (Damien).
Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Do not unmap object unless no other VMAs reference it
When using an IOMMU, GEM objects are mapped by their DMA address as the
physical address is unknown. This depends on the underlying IOMMU
driver to map and unmap the physical pages properly as defined in
intel_iommu.c.
The current code will tell the IOMMU to unmap the GEM BO's pages on the
destruction of the first VMA that "maps" that BO. This is clearly wrong
as there may be other VMAs "mapping" that BO (using flink). The scanout
is one such example.
The patch fixes this issue by only unmapping the DMA maps when there are
no more VMAs mapping that object. This is equivalent to when an object
is considered unbound as can be seen by the code. On the first VMA that
again because bound, we will remap.
An alternate solution would be to move the dma mapping to object
creation and destrubtion. I am not sure if this is considered an
unfriendly thing to do.
Some notes to backporters trying to backport full PPGTT:
The bug can never be hit without enabling the IOMMU. The existing code
will also do the right thing when the object is shared via dmabuf. The
failure should be demonstrable with flink. In cases when not using
intel_iommu_strict it is likely (likely, as defined by: off the top of
my head) on current workloads to *not* hit this bug since we often
teardown all VMAs for an object shared across multiple VMs. We also
finish access to that object before the first dma_unmapping.
intel_iommu_strict with flinked buffers is likely to hit this issue.
Signed-off-by: Armin Reese <armin.c.reese@intel.com>
[danvet: Add the excellent commit message provided by Ben.] Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 17 Jul 2014 14:16:39 +0000 (11:16 -0300)]
drm/i915: remove plane/cursor/pipe assertions from intel_crtc_disable
Since we merged runtime PM support for DPMS, it is possible that these
assertions will be called when the power wells are disabled but a mode
is "set", resulting in "failed assertion" and "device suspended while
reading register" WARNs.
To reproduce the bug: disable all screens using mode unset, do a
modeset on one screen, disable it using DPMS, then try to do a mode
unset on it again to see the WARNs.
v2: The first version of this patch changed the assertions to also
check the power domains. Daniel suggested that it would be better to
just remove the assertions: "The modeset state checker
will already notice when we've failed to turn off the pipe. And we
check cursors and plane state in the enable sequence, too. Since we
use these asserts a lot to lock down the precise modeset sequence I
actually prefer if they're a bit dumb and don't check the power
wells."
Testcase: igt/rpm_rpm/dpms-mode-unset-lpsp
Testcase: igt/rpm_rpm/dpms-mode-unset-non-lpsp Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 1 Jul 2014 18:17:47 +0000 (11:17 -0700)]
drm/i915: Reorder ctx unref on ppgtt cleanup
The comment [which was mine] is wrong. The context object can never be
bound in a PPGTT because it is only capable of living in the Global GTT.
So, remove the comment, and reorder the unref. What's nice about the
latter is it keeps the context object alive past the PPGTT. This makes
the destroy ordering symmetric with the creation ordering.
Create:
1. Create context
2. Create PPGTT
Destroy:
1. Destroy PPGTT
2. Destroy context
As far as I know, this does not fix a bug. The code previously kept the
context data structure, only the object was gone. As the code was,
nothing tried to use the object after this point.
NOTE: If in the future we have cases where the PPGTT can/should outlive
the context (which doesn't occur today, but the code permits it), this
ordering does not matter. Even if this occurs, as it stands now, we do
not expect that to be the normal case, and having this order makes
debugging a bit easier if we're tracking object lifetimes for the
context vs ppgtt
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Resolve conflict with Oscar's execlist prep patches.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 1 Jul 2014 18:17:41 +0000 (11:17 -0700)]
drm/i915/error: Check the potential ctx obj's vm
The bound list is global (all objects which back the VMAs are stored
here). Recently the BUG() in the offset lookup was demoted to a WARN,
but the fault actually lies in the caller, here.
This bug has existed since the initial introduction of PPGTT (however,
it was fixed in unmerged patches to fix up the error state).
Note: The reason for the BUG_ON to WARN_ON demotion was _not_ to
duct-tape over this bug here but another but triggerable without
ppgtt. See the commit for details:
The BUG in here seems to be the cause behind hard-hangs when I cat the
i915_gem_pageflip debugfs file (which calls this from an irq
spinlock). But only while running a full igt run after a while. I
still need to root cause the underlying issue.
I'll also start reject patches which add new BUG_ON but don't come
with a really good justification for it. The general rule really
should be to just WARN and hope the driver survives for long enough.
v2: Make the WARN a bit more useful per Chris' suggestion.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Clarfy that the WARN_ON (former BUG_ON) in ggtt_offset caught
more than just this bug fixed in this patch here.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Wed, 16 Jul 2014 20:49:30 +0000 (17:49 -0300)]
drm/i915: BDW can also detect unclaimed registers
By the time I wrote this patch, it allowed me to catch some problems.
But due to patch reordering - in order to prevent fake "regression"
reports - this patch may be merged after the fixes of the problems
identified by this patch.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Wed, 16 Jul 2014 20:49:29 +0000 (17:49 -0300)]
drm/i915: reorganize the unclaimed register detection code
The current code only runs when we do an I915_WRITE operation. It
checks if the unclaimed register flag is set before we do the
operation, and then it checks it again after we do the operation. This
double check allows us to find out if the I915_WRITE operation in
question is the bad one, or if some previous code is the bad one. When
it finds a problem, our code uses DRM_ERROR to signal it.
The good thing about the current code is that it detects the problem,
so at least we can know we did something wrong. The problem is that
even though we find the problem, we don't really have much information
to actually debug it. So whenever I see one of these DRM_ERROR
messages on my systems, the first thing I do is apply a patch to
change the DRM_ERROR to a WARN and also check for unclaimed registers
on I915_READ operations. This local patch makes things even slower,
but it usually helps a lot in finding the bad code.
The first point here is that since the current code is only useful to
detect whether we have a problem or not, but it is not really good to
find the cause of the problem, I don't think we should be checking
both before and after every I915_WRITE operation: just doing the check
once should be enough for us to quickly detect problems. With this
change, the code that runs by default for every single user will only
do 1 read operation for every single I915_WRITE, instead of 2. This
patch does this change.
The second point is that the local patch I have should be upstream,
but since it makes things slower it should be disabled by default. So
I added the i915.mmio_debug option to enable it.
So after this patch, this is what will happen:
- By default, we will try to detect unclaimed registers once after
every I915_WRITE operation. Previously we tried twice for every
I915_WRITE.
- When we find an unclaimed register we will still print a DRM_ERROR
message, but we will now tell the user to try again with
i915.mmio_debug=1.
- When we use i915.mmio_debug=1 we will try to find unclaimed
registers both before and after every I915_READ and I915_WRITE
operation, and we will print stack traces in case we find them.
This should really help locating the exact point of the bad code
(or at least finding out that i915.ko is not the problem).
This commit also opens space for really-slow register debugging
operations on other platforms. In theory we can now add lots and lots
of debug code behind i915.mmio_debug, enable this option on our tests,
and catch more problems.
Jesse Barnes [Fri, 20 Jun 2014 16:29:20 +0000 (09:29 -0700)]
drm/i915: add helper for checking whether IRQs are enabled
Now that we use the runtime IRQ enable/disable functions in our suspend
path, we can simply check the pm._irqs_disabled flag everywhere. So
rename it to catch the users, and add an inline for it to make the
checks clear everywhere.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Fri, 20 Jun 2014 16:29:19 +0000 (09:29 -0700)]
drm/i915: don't warn if IRQs are disabled when shutting down display IRQs
This was always the case on our suspend path, but it was recently
exposed by the change to use our runtime IRQ disable routine rather than
the full DRM IRQ disable. Keep the warning on the enable side, as that
really would indicate a bug.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 4 Jul 2014 14:50:31 +0000 (11:50 -0300)]
drm/i915: extract and improve gen8_irq_power_well_post_enable
Move it from hsw_power_well_post_enable() (intel_pm.c) to i915_irq.c
so we can reuse the nice IRQ macros we have there. The main difference
is that now we're going to check if the IIR register is non-zero when
we try to re-enable the interrupts.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 4 Jul 2014 14:50:29 +0000 (11:50 -0300)]
drm/i915: don't write powered down IRQ registers on Gen 8
If we enable unclaimed register reporting on Gen 8, we will discover
that the IRQ registers for pipes B and C are also on the power well,
so writes to them when the power well is disabled result in unclaimed
register errors.
Also, hsw_power_well_post_enable() already takes care of re-enabling
them once the power well is enabled.
Testcase: igt/pm_rpm/rte Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 16 Jul 2014 07:49:40 +0000 (09:49 +0200)]
drm/i915: Use genX_ prefix for gt irq enable/disable functions
Traditionally we use genX_ for GT/render stuff and the codenames for
display stuff. But the gt and pm interrupt handling functions on
gen5/6+ stuck out as exceptions, so convert them.
Looking at the diff this nicely realigns our ducks since almost all
the callers are already platform-specific functions following the
genX_ pattern.
Spotted while reviewing some internal rps patches.
No function change in this patch.
Acked-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 11 Jul 2014 10:28:01 +0000 (11:28 +0100)]
drm/i915: Initialise userptr mmu_notifier serial to 1
During the range invalidate, we walk the list of buffers associated with
the mmu_notifer and find the ones that overlap the range. An
optimisation is made to speed up the iteration by assuming the previous
iter is still valid whilst the tree is unmodified. This exposes a bug
when a range invalidate is triggered after we have just created the
mmu_notifier, but before attaching any buffers. In that case, we presume
we have an unmodified list and start walking from the last iter which is
NULL. Oops.
The easiest fix is then to initialise the serial of the tree to 1.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Testecase: igt/gem_userptr_blts/stress-mm Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 11 Jul 2014 10:28:00 +0000 (11:28 +0100)]
drm/i915: Abandon oom quickly if killed by a signal
Whilst waiting to obtain our locks for the last resort shrinking before
an oom, we check whether or not a fatal signal was pending. If there was,
we do not need to keep waiting as the oom will be aborted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The prefix is a bit inconsistent since we usually pick gen8_ for GT
related functions. But this anti-pattern is already established with snb,
so material for a different patch.
Vandana Kannan [Wed, 11 Jun 2014 05:36:01 +0000 (11:06 +0530)]
drm/i915: Add aspect ratio property for HDMI
Create and attach the drm property to set aspect ratio. If there is no user
specified value, then PAR_NONE/Automatic option is set by default. User can
select aspect ratio 4:3 or 16:9. The aspect ratio selected by user would
come into effect with a mode set.
v2: Modified switch case to include aspect ratio enum changes
v3: Modified the patch according the change in the earlier patch to return
errno in case property creation fails. With this change, property will be
attached only if creation is successful
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Vandana Kannan [Thu, 5 Jun 2014 09:15:29 +0000 (14:45 +0530)]
drm/edid: Check for user aspect ratio input
In case user has specified an input for aspect ratio through the property,
then the user space value for PAR would take preference over the value from
CEA mode list.
v2: Thierry's review comments.
- Modified the comment "Populate..." as per review comments
v3: Thierry's review comments.
- Modified the comment to block comment format.
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 24 Apr 2014 13:50:56 +0000 (10:50 -0300)]
drm/i915: remove useless runtime PM get calls
We already call intel_display_power_get, which will get a power
domain, and every power domain should get a runtime PM reference,
which will wake up the machine.
v2: - Also touch intel_crt_detect() (Ville).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Fixup commit message as spotted by Ville.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 16 Dec 2013 15:57:40 +0000 (15:57 +0000)]
drm/i915: Handle failure to kick out a conflicting fb driver
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Panel Self Refresh is an eDP power saving feature specified by VESA's eDP v1.3,
that allows some panel componets to shutdown while you still see static images on
the screen. Besides being supported on the platform it must be supported by the
eDP panel itself.
Now that we have the propper frontbuffer tracking support and correct locks on place
we can enabled this feature by default.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 11 Jul 2014 17:30:18 +0000 (10:30 -0700)]
drm/i915: Remove redundant HAS_PSR checks
We only need to check for this in psr_enable, everything else is
already protect by the dev_priv->psr.enabled checks. Those need the
psr locking, but these functions are called infrequent enough that the
locking overhead is negligible.
Suggested by Chris Wilson.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 11 Jul 2014 17:30:16 +0000 (10:30 -0700)]
drm/i915: Fix up PSR frontbuffer tracking
I've tried to split this up, but all the changes are so tightly
related that I didn't find a good way to do this without breaking
bisecting. Essentially this completely changes how psr is glued into
the overall driver, and there's not much you can do to soften such a
paradigm change.
- Use frontbuffer tracking bits stuff to separate disable and
re-enable.
- Don't re-check everything in the psr work. We have now accurate
tracking for everything, so no need to check for sprites or tiling
really. Allows us to ditch tons of locks.
- That in turn allows us to properly cancel the work in the disable
function - no more deadlocks.
- Add a check for HSW sprites and force a flush. Apparently the
hardware doesn't forward the flushing when updating the sprite base
address. We can do the same trick everywhere else we have such
issues, e.g. on baytrail with ... everything.
- Don't re-enable psr with a delay in psr_exit. It really must be
turned off forever if we detect a gtt write. At least with the
current frontbuffer render tracking. Userspace can do a busy ioctl
call or no-op pageflip to re-enable psr.
- Drop redundant checks for crtc and crtc->active - now that they're
only called from enable this is guaranteed.
- Fix up the hsw port check. eDP can also happen on port D, but the
issue is exactly that it doesn't work there. So an || check is
wrong.
- We still schedule the psr work with a delay. The frontbuffer
flushing interface mandates that we upload the next full frame, so
need to wait a bit. Once we have single-shot frame uploads we can do
better here.
v2: Don't enable psr initially, rely upon the fb flush of the initial
plane setup for that. Gives us more unified code flow and makes the
crtc enable sequence less a special case.
v3: s/psr_exit/psr_invalidate/ for consistency
v4: Fixup whitespace.
v5: Correctly bail out of psr_invalidate/flush when
dev_priv->psr.enabled is NULL. Spotted by Rodrigo.
v6:
- Only schedule work when there's work to do. Fixes WARNINGs reported
by Rodrigo.
- Comments Chris requested to clarify the code.
v7: Fix conflict on rebase (Rodrigo)
Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v6) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 11 Jul 2014 17:30:15 +0000 (10:30 -0700)]
drm/i915: Add locking to psr code
It's not really optional to have locking ...
The ugly part is how much locking the psr work needs since it has to
recheck everything. Which is way too much. But we need to ditch the
psr work in it's current form anyway and implement proper frontbuffer
tracking.
The other nasty bit that had to go was the delayed work cancle in
psr_exit. Which means a bunch of races just became a bit more likely,
but mea culpa.
v2: Fixup HAS_PSR checks, resulting in uninitialized mutex issues.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
projects / ~emulex / infiniband.git / log