Andrey Ryabinin [Fri, 8 Aug 2014 21:22:07 +0000 (14:22 -0700)]
lib/idr.c: fix out-of-bounds pointer dereference
I'm working on address sanitizer project for kernel. Recently we
started experiments with stack instrumentation, to detect out-of-bounds
read/write bugs on stack.
Just after booting I've hit out-of-bounds read on stack in idr_for_each
(and in __idr_remove_all as well):
struct idr_layer **paa = &pa[0];
while (id >= 0 && id <= max) {
...
while (n < fls(id)) {
n += IDR_BITS;
p = *--paa; <--- here we are reading pa[-1] value.
}
}
Despite the fact that after this dereference we are exiting out of loop
and never use p, such behaviour is undefined and should be avoided.
Fix this by moving pointer derference to the beggining of the loop,
right before we will use it.
fs/proc/vmcore.c:mmap_vmcore: skip non-ram pages reported by hypervisors
We have a special check in read_vmcore() handler to check if the page was
reported as ram or not by the hypervisor (pfn_is_ram()). However, when
vmcore is read with mmap() no such check is performed. That can lead to
unpredictable results, e.g. when running Xen PVHVM guest memcpy() after
mmap() on /proc/vmcore will hang processing HVMMEM_mmio_dm pages creating
enormous load in both DomU and Dom0.
Fix the issue by mapping each non-ram page to the zero page. Keep direct
path with remap_oldmem_pfn_range() to avoid looping through all pages on
bare metal.
The issue can also be solved by overriding remap_oldmem_pfn_range() in
xen-specific code, as remap_oldmem_pfn_range() was been designed for.
That, however, would involve non-obvious xen code path for all x86 builds
with CONFIG_XEN_PVHVM=y and would prevent all other hypervisor-specific
code on x86 arch from doing the same override.
[fengguang.wu@intel.com: remap_oldmem_pfn_checked() can be static]
[akpm@linux-foundation.org: clean up layout] Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a forking process has a thread calling (un)mmap (silly but still),
the child process may have some of its mm's vm usage counters (total_vm
and friends) screwed up, because currently they are copied from oldmm
w/o holding any locks (memcpy in dup_mm).
This patch moves the counters initialization to dup_mmap() to be called
under oldmm->mmap_sem, which eliminates any possibility of race.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm->pinned_vm counts pages of mm's address space that were permanently
pinned in memory by increasing their reference counter. The counter was
introduced by commit bc3e53f682d9 ("mm: distinguish between mlocked and
pinned pages"), while before it locked_vm had been used for such pages.
Obviously, we should reset the counter on fork if !CLONE_VM, just like
we do with locked_vm, but currently we don't. Let's fix it.
This patch will fix the contents of /proc/pid/status:VmPin.
ib_umem_get[infiniband] and perf_mmap still check pinned_vm against
RLIMIT_MEMLOCK. It's left from the times when pinned pages were accounted
under locked_vm, but today it looks wrong. It isn't clear how we should
deal with it.
We still have some drivers accounting pinned pages under mm->locked_vm -
this is what commit bc3e53f682d9 was fighting against. It's
infiniband/usnic and vfio.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 8 Aug 2014 21:21:27 +0000 (14:21 -0700)]
proc: faster /proc/$PID lookup
Currently lookup for /proc/$PID first goes through spinlock and whole list
of misc /proc entries only to confirm that, yes, /proc/42 can not possibly
match random proc entry.
List is is several dozens entries long (52 entries on my setup).
None of this is necessary.
Try to convert dentry name to integer first.
If it works, it must be /proc/$PID.
If it doesn't, it must be random proc entry.
Based on patch from Al Viro.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
proc_uid_seq_operations, proc_gid_seq_operations and
proc_projid_seq_operations are only called in proc_id_map_open with
seq_open as const struct seq_operations so we can constify the 3
structures and update proc_id_map_open prototype.
text data bss dec hex filename
6817 404 1984 9205 23f5 kernel/user_namespace.o-before
6913 308 1984 9205 23f5 kernel/user_namespace.o-after
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch integrates creation of sysfs groups and
attributes into NILFS file system driver.
It was found the issue with nilfs_sysfs_{create/delete}_snapshot_group
functions by Michael L Semon <mlsemon35@gmail.com> in the first
version of the patch:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:579
in_atomic(): 1, irqs_disabled(): 0, pid: 32676, name: umount.nilfs2
2 locks held by umount.nilfs2/32676:
#0: (&type->s_umount_key#21){++++..}, at: [<790c18e2>] deactivate_super+0x37/0x58
#1: (&(&nilfs->ns_cptree_lock)->rlock){+.+...}, at: [<791bf659>] nilfs_put_root+0x23/0x5a
Preemption disabled at:[<791bf659>] nilfs_put_root+0x23/0x5a
The reason of the issue was placement of
nilfs_sysfs_{create/delete}_snapshot_group() call under
nilfs->ns_cptree_lock protection. But this protection is unnecessary and
wrong solution. The second version of the patch fixes this issue.
[fengguang.wu@intel.com: nilfs_sysfs_create_mounted_snapshots_group can be static] Reported-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nilfs2: add /sys/fs/nilfs2/<device>/mounted_snapshots/<snapshot> group
This patch adds creation of <snapshot> group for every mounted
snapshot in /sys/fs/nilfs2/<device>/mounted_snapshots group.
The group contains details about mounted snapshot:
(1) inodes_count - show number of inodes for snapshot.
(2) blocks_count - show number of blocks for snapshot.
Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nilfs2: add /sys/fs/nilfs2/<device>/checkpoints group
This patch adds creation of /sys/fs/nilfs2/<device>/checkpoints
group.
The checkpoints group contains attributes that describe
details about volume's checkpoints:
(1) checkpoints_number - show number of checkpoints on volume.
(2) snapshots_number - show number of snapshots on volume.
(3) last_seg_checkpoint - show checkpoint number of the latest segment.
(4) next_checkpoint - show next checkpoint number.
Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nilfs2: add /sys/fs/nilfs2/<device>/segments group
This patch adds creation of /sys/fs/nilfs2/<device>/segments
group.
The segments group contains attributes that describe
details about volume's segments:
(1) segments_number - show number of segments on volume.
(2) blocks_per_segment - show number of blocks in segment.
(3) clean_segments - show count of clean segments.
(4) dirty_segments - show count of dirty segments.
Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds creation of /sys/fs/nilfs2/<device>/segctor
group.
The segctor group contains attributes that describe
segctor thread activity details:
(1) last_pseg_block - show start block number of the latest segment.
(2) last_seg_sequence - show sequence value of the latest segment.
(3) last_seg_checkpoint - show checkpoint number of the latest segment.
(4) current_seg_sequence - show segment sequence counter.
(5) current_last_full_seg - show index number of the latest full segment.
(6) next_full_seg - show index number of the full segment index
to be used next.
(7) next_pseg_offset - show offset of next partial segment in
the current full segment.
(8) next_checkpoint - show next checkpoint number.
(9) last_seg_write_time - show write time of the last segment
in human-readable format.
(10) last_seg_write_time_secs - show write time of the last segment
in seconds.
(11) last_nongc_write_time - show write time of the last segment
not for cleaner operation in human-readable format.
(12) last_nongc_write_time_secs - show write time of the last segment
not for cleaner operation in seconds.
(13) dirty_data_blocks_count - show number of dirty data blocks.
Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nilfs2: add /sys/fs/nilfs2/<device>/superblock group
This patch adds creation of /sys/fs/nilfs2/<device>/superblock
group.
The superblock group contains attributes that describe
superblock's details:
(1) sb_write_time - show previous write time of super block in
human-readable format.
(2) sb_write_time_secs - show previous write time of super block
in seconds.
(3) sb_write_count - show write count of super block.
(4) sb_update_frequency - show/set interval of periodical update
of superblock (in seconds). You can set preferable frequency of
superblock update by command:
This patch adds creation of /sys/fs/nilfs2/<device> group.
The <device> group contains attributes that describe file
system partition's details:
(1) revision - show NILFS file system revision.
(2) blocksize - show volume block size in bytes.
(3) device_size - show volume size in bytes.
(4) free_blocks - show count of free blocks on volume.
(5) uuid - show volume's UUID.
(6) volume_name - show volume's name.
Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset implements creation of sysfs groups and attributes with
the purpose to show NILFS2 volume details, internal state of the driver
and to manage internal state of NILFS2 driver.
Sysfs is a virtual file system that exports information about devices
and drivers from the kernel device model to user space, and is also used
for configuration. NILFS2 is a complex file system that has segctor
thread, GC thread, checkpoint/snapshot model and so on. Sysfs namespace
provides native and easy way for: (1) getting info and statistics about
volume state; (2) getting info and configuration of internal subsystems
(segctor thread); (3) snapshots management.
Suggested patchset provides basis for managing segctor thread behaviour
and manipulation by snapshots. Currently, it informs only about segctor
thread's internal parameters and about mounted snapshots. But sysfs
interface can provide easy and simple way for deep management of segctor
thread and snapshots.
This patchset provides opportunity to manage interval of periodical
update of superblock (in seconds). Default value is 10 seconds. Now a
user can increase this value by means of
nilfs2/<device>/superblock/sb_update_frequency attribute in the case of
necessity.
Also the patchset provides opportunity to get information easily about
key volumes's parameters (free blocks, superblock write count,
superblock update frequency, latest segment info, dirty data blocks
count, count of clean segments, count of dirty segments and so on) in
real time manner. Such information can be used in scripts for subtle
management of filesystem.
Implemented functionality creates such groups:
(1) /sys/fs/nilfs2 - root group
(2) /sys/fs/nilfs2/features - group contains attributes that describe NILFS
file system driver features
(3) /sys/fs/nilfs2/<device> - group contains attributes that describe file
system partition's details
(4) /sys/fs/nilfs2/<device>/superblock - group contains attributes that describe
superblock's details
(5) /sys/fs/nilfs2/<device>/segctor - group contains attributes that describe
segctor thread activity details
(6) /sys/fs/nilfs2/<device>/segments - group contains attributes that describe
details about volume's segments
(7) /sys/fs/nilfs2/<device>/checkpoints - group contains attributes that describe
details about volume's checkpoints
(8) /sys/fs/nilfs2/<device>/mounted_snapshots - group contains group for every
mounted snapshot
(9) /sys/fs/nilfs2/<device>/mounted_snapshots/<snapshot> - group contains
details about mounted snapshot
This patch (of 9):
This patch adds code of creation /sys/fs/nilfs2 group and
/sys/fs/nilfs2/features group.
The features group contains attributes that describe NILFS
file system driver features:
(1) revision - show current revision of NILFS file system driver.
There are two formats of timestamp output - seconds and human-readable
format. Every showed timestamp has two sysfs files (time-<xxx> and
time-<xxx>-secs). One sysfs file (time-<xxx>) shows time in
human-readable format. Another sysfs file (time-<xxx>-secs) shows time in
seconds.
It was reported by Michael Semon that timestamp output in human-readable
format should be changed from "2014-4-12 14:5:38" to "2014-04-12
14:05:38". Second version of the patch fixes this issue.
Reported-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/befs/linuxvfs.c: check superblock before dump operation
befs_dump_super_block was called between befs_load_sb and befs_check_sb.
It has been reported to crash (5/900) with null block testing.
This patch loads, checks and only dump superblock if it's a valid one
then brelse bh.
(befs_dump_super_block uses disk_sb (bh->b_data) so it seems we need to
call it before brelse(bh) but I don't know why befs_check_sb was called
after brelse. Another thing I don't understand is why this problem
appears now).
Signed-off-by: Fabian Frederick <fabf@skynet.be> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The interrupt handler gets the driver data associated with the RTC
device and doesn't check it for validity. This can cause a NULL pointer
being dereferenced when and interrupt fires before the driver data was
properly set up.
Fix this by setting the driver data earlier (before the interrupt is
requested).
Hyogi Gim [Fri, 8 Aug 2014 21:20:24 +0000 (14:20 -0700)]
driver/rtc/class.c: check the error after rtc_read_time()
In rtc_suspend() and rtc_resume(), the error after rtc_read_time() is not
checked. If rtc device fail to read time, we cannot guarantee the
following process.
Add the verification code for returned rtc_read_time() error.
Stuart Longland [Fri, 8 Aug 2014 21:20:20 +0000 (14:20 -0700)]
drivers/rtc/rtc-isl12022.c: device tree support
Add support for configuring the ISL12022 real-time clock via the Device
tree framework. This is based on what I've seen in the related ISL12057
driver, it has been tested and works on a Technologic Systems TS-7670
device which uses a ISL12020 RTC device, my device tree looks like this:
This patch adds alarm support for the NXP PCF8563 chip.
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This functions allow to factorize I2C I/O operations.
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Salter [Fri, 8 Aug 2014 21:20:14 +0000 (14:20 -0700)]
rtc: ia64: allow other architectures to use EFI RTC
Currently, the rtc-efi driver is restricted to ia64 only. Newer
architectures with EFI support may want to also use that driver. This
patch moves the platform device setup from ia64 into drivers/rtc and
allow any architecture with CONFIG_EFI=y to use the rtc-efi driver.
Signed-off-by: Mark Salter <msalter@redhat.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Beulich [Fri, 8 Aug 2014 21:20:09 +0000 (14:20 -0700)]
drivers/rtc/rtc-efi.c: check for invalid data coming back from UEFI
In particular seeing zero in eft->month is problematic, as it results in
-1 (converted to unsigned int, i.e. yielding 0xffffffff) getting passed
to rtc_year_days(), where the value gets used as an array index
(normally resulting in a crash). This was observed with the driver
enabled on x86 on some Fujitsu system (with possibly not up to date
firmware, but anyway).
Perhaps efi_read_alarm() should not fail if neither enabled nor pending
are set, but the returned time is invalid?
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reported-by: Raymund Will <rw@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Acked-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 5516f0971793 ("drivers/rtc/rtc-ds1742.c: remove redundant
of_match_ptr() helper") has description as: "'ds1742_rtc_of_match' is
always compiled in. Hence the helper macro is not needed".
It is not true, of_match_ptr() macro makes of_device_id parameter unused
and this constant is declared with __maybe_unused attribute, so normally
this variable should be discarded by linker. This patch revers this
commit, since there are no reason to compile of_device_id constant for
non-DT systems.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jean Delvare [Fri, 8 Aug 2014 21:20:05 +0000 (14:20 -0700)]
drivers/rtc/Kconfig: add hardware dependency to rtc-moxart
The rtc-moxart driver is only useful on MOXA ART systems so it should
depend on ARCH_MOXART as all other MOXA ART drivers already do. Add
COMPILE_TEST as an alternative to allow for build testing on other
systems.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Fri, 8 Aug 2014 21:19:58 +0000 (14:19 -0700)]
autofs4: comment typo: remove a a doubled word
Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Fri, 8 Aug 2014 21:19:54 +0000 (14:19 -0700)]
autofs4: don't take spinlock when not needed in autofs4_lookup_expiring
If the expiring_list is empty, we can avoid a costly spinlock in the
rcu-walk path through autofs4_d_manage (once the rest of the path
becomes rcu-walk friendly).
Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Fri, 8 Aug 2014 21:19:52 +0000 (14:19 -0700)]
autofs4: remove a redundant assignment
The variable 'ino' already exists and already has the correct value.
The d_fsdata of a dentry is never changed after the d_fsdata is
instantiated, so this new assignment cannot be necessary.
It was introduced in commit b5b801779d59 ("autofs4: Add d_manage()
dentry operation").
Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Fri, 8 Aug 2014 21:19:50 +0000 (14:19 -0700)]
autofs4: remove unused autofs4_ispending()
Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Gortmaker [Fri, 8 Aug 2014 21:19:46 +0000 (14:19 -0700)]
init: make rootdelay=N consistent with rootwait behaviour
Currently rootdelay=N and rootwait behave differently (aside from the
obvious unbounded wait duration) because they are at different places in
the init sequence.
The difference manifests itself for md devices because the call to
md_run_setup() lives between rootdelay and rootwait, so if you try to use
rootdelay=20 to try and allow a slow RAID0 array to assemble, you get
this:
[ 4.526011] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 22.972079] md: Waiting for all devices to be available before autodetect
i.e. you've achieved nothing other than delaying the probing 20s, when
what you wanted was a 20s delay _after_ the probing for md devices was
initiated.
Here we move the rootdelay code to be right beside the rootwait code, so
that their behaviour is consistent.
It should be noted that in doing so, the actions based on the
saved_root_name[0] and initrd_load() were previously put on hold by
rootdelay=N and now currently will not be delayed. However, I think
consistent behaviour is more important than matching historical behaviour
of delaying the above two operations.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/ramfs/file-nommu.c: replace count*size kzalloc by kcalloc
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Axel Lin <axel.lin@ingics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Namhyung Kim [Fri, 8 Aug 2014 21:19:41 +0000 (14:19 -0700)]
kernel/kallsyms.c: fix %pB when there's no symbol at the address
__sprint_symbol() should restore original address when kallsyms_lookup()
failed to find a symbol. It's reported when dumpstack shows an address in
a dynamically allocated trampoline for ftrace.
Johannes Weiner [Fri, 8 Aug 2014 21:19:33 +0000 (14:19 -0700)]
mm: memcontrol: avoid charge statistics churn during page migration
Charge migration currently disables IRQs twice to update the charge
statistics for the old page and then again for the new page.
But migration is a seamless transition of a charge from one physical
page to another one of the same size, so this should be a non-event from
an accounting point of view. Leave the statistics alone.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add forward declarations for struct pglist_data, mem_cgroup.
Remove __init, __meminit from function prototypes and inline functions.
Remove redundant inclusion of bit_spinlock.h.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Fri, 8 Aug 2014 21:19:24 +0000 (14:19 -0700)]
mm: memcontrol: use page lists for uncharge batching
Pages are now uncharged at release time, and all sources of batched
uncharges operate on lists of pages. Directly use those lists, and
get rid of the per-task batching state.
This also batches statistics accounting, in addition to the res
counter charges, to reduce IRQ-disabling and re-enabling.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Fri, 8 Aug 2014 21:19:22 +0000 (14:19 -0700)]
mm: memcontrol: rewrite uncharge API
The memcg uncharging code that is involved towards the end of a page's
lifetime - truncation, reclaim, swapout, migration - is impressively
complicated and fragile.
Because anonymous and file pages were always charged before they had their
page->mapping established, uncharges had to happen when the page type
could still be known from the context; as in unmap for anonymous, page
cache removal for file and shmem pages, and swap cache truncation for swap
pages. However, these operations happen well before the page is actually
freed, and so a lot of synchronization is necessary:
- Charging, uncharging, page migration, and charge migration all need
to take a per-page bit spinlock as they could race with uncharging.
- Swap cache truncation happens during both swap-in and swap-out, and
possibly repeatedly before the page is actually freed. This means
that the memcg swapout code is called from many contexts that make
no sense and it has to figure out the direction from page state to
make sure memory and memory+swap are always correctly charged.
- On page migration, the old page might be unmapped but then reused,
so memcg code has to prevent untimely uncharging in that case.
Because this code - which should be a simple charge transfer - is so
special-cased, it is not reusable for replace_page_cache().
But now that charged pages always have a page->mapping, introduce
mem_cgroup_uncharge(), which is called after the final put_page(), when we
know for sure that nobody is looking at the page anymore.
For page migration, introduce mem_cgroup_migrate(), which is called after
the migration is successful and the new page is fully rmapped. Because
the old page is no longer uncharged after migration, prevent double
charges by decoupling the page's memcg association (PCG_USED and
pc->mem_cgroup) from the page holding an actual charge. The new bits
PCG_MEM and PCG_MEMSW represent the respective charges and are transferred
to the new page during migration.
mem_cgroup_migrate() is suitable for replace_page_cache() as well,
which gets rid of mem_cgroup_replace_page_cache(). However, care
needs to be taken because both the source and the target page can
already be charged and on the LRU when fuse is splicing: grab the page
lock on the charge moving side to prevent changing pc->mem_cgroup of a
page under migration. Also, the lruvecs of both pages change as we
uncharge the old and charge the new during migration, and putback may
race with us, so grab the lru lock and isolate the pages iff on LRU to
prevent races and ensure the pages are on the right lruvec afterward.
Swap accounting is massively simplified: because the page is no longer
uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can
transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry
before the final put_page() in page reclaim.
Finally, page_cgroup changes are now protected by whatever protection the
page itself offers: anonymous pages are charged under the page table lock,
whereas page cache insertions, swapin, and migration hold the page lock.
Uncharging happens under full exclusion with no outstanding references.
Charging and uncharging also ensure that the page is off-LRU, which
serializes against charge migration. Remove the very costly page_cgroup
lock and set pc->flags non-atomically.
[mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable]
[vdavydov@parallels.com: fix flags definition] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Tested-by: Jet Chen <jet.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Fri, 8 Aug 2014 21:19:20 +0000 (14:19 -0700)]
mm: memcontrol: rewrite charge API
These patches rework memcg charge lifetime to integrate more naturally
with the lifetime of user pages. This drastically simplifies the code and
reduces charging and uncharging overhead. The most expensive part of
charging and uncharging is the page_cgroup bit spinlock, which is removed
entirely after this series.
Here are the top-10 profile entries of a stress test that reads a 128G
sparse file on a freshly booted box, without even a dedicated cgroup (i.e.
executing in the root memcg). Before:
As you can see, the memcg footprint has shrunk quite a bit.
text data bss dec hex filename
37970 9892 400 48262 bc86 mm/memcontrol.o.old
35239 9892 400 45531 b1db mm/memcontrol.o
This patch (of 4):
The memcg charge API charges pages before they are rmapped - i.e. have an
actual "type" - and so every callsite needs its own set of charge and
uncharge functions to know what type is being operated on. Worse,
uncharge has to happen from a context that is still type-specific, rather
than at the end of the page's lifetime with exclusive access, and so
requires a lot of synchronization.
Rewrite the charge API to provide a generic set of try_charge(),
commit_charge() and cancel_charge() transaction operations, much like
what's currently done for swap-in:
mem_cgroup_try_charge() attempts to reserve a charge, reclaiming
pages from the memcg if necessary.
mem_cgroup_commit_charge() commits the page to the charge once it
has a valid page->mapping and PageAnon() reliably tells the type.
mem_cgroup_cancel_charge() aborts the transaction.
This reduces the charge API and enables subsequent patches to
drastically simplify uncharging.
As pages need to be committed after rmap is established but before they
are added to the LRU, page_add_new_anon_rmap() must stop doing LRU
additions again. Revive lru_cache_add_active_or_unevictable().
[hughd@google.com: fix shmem_unuse]
[hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Fri, 8 Aug 2014 21:19:15 +0000 (14:19 -0700)]
Revert "slab: remove BAD_ALIEN_MAGIC"
This reverts commit a640616822b2 ("slab: remove BAD_ALIEN_MAGIC").
commit a640616822b2 ("slab: remove BAD_ALIEN_MAGIC") assumes that the
system with !CONFIG_NUMA has only one memory node. But, it turns out to
be false by the report from Geert. His system, m68k, has many memory
nodes and is configured in !CONFIG_NUMA. So it couldn't boot with above
change.
Here goes his failure report.
With latest mainline, I'm getting a crash during bootup on m68k/ARAnyM:
Code: f7e5 4879 002f 69ef 61ff ffca 462a 4e47 <4879> 0035 4b1c 61ff
fff0 0cc4 7005 23c0 0037 fd20 588f 265f 285f 4e75 48e7 301c
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill the idle task!
Although there is a alternative way to fix this issue such as disabling
use of alien cache on !CONFIG_NUMA, but, reverting issued commit is better
to me in this time.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 7 Aug 2014 16:02:26 +0000 (09:02 -0700)]
Merge tag 'microblaze-3.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
- add new syscall and fix comment
- fix udelay implementation
- fix libgcc for modules
* tag 'microblaze-3.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Change libgcc-style functions from lib-y to obj-y
microblaze: Wire-up renameat2 syscall
microblaze: Add syscall number comment
microblaze: delay.h fix udelay and ndelay for 8 bit args
Linus Torvalds [Thu, 7 Aug 2014 15:50:34 +0000 (08:50 -0700)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt:
"This is the powerpc new goodies for 3.17. The short story:
The biggest bit is Michael removing all of pre-POWER4 processor
support from the 64-bit kernel. POWER3 and rs64. This gets rid of a
ton of old cruft that has been bitrotting in a long while. It was
broken for quite a few versions already and nobody noticed. Nobody
uses those machines anymore. While at it, he cleaned up a bunch of
old dusty cabinets, getting rid of a skeletton or two.
Then, we have some base VFIO support for KVM, which allows assigning
of PCI devices to KVM guests, support for large 64-bit BARs on
"powernv" platforms, support for HMI (Hardware Management Interrupts)
on those same platforms, some sparse-vmemmap improvements (for memory
hotplug),
There is the usual batch of Freescale embedded updates (summary in the
merge commit) and fixes here or there, I think that's it for the
highlights"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits)
powerpc/eeh: Export eeh_iommu_group_to_pe()
powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API
powerpc: Reduce scariness of interrupt frames in stack traces
powerpc: start loop at section start of start in vmemmap_populated()
powerpc: implement vmemmap_free()
powerpc: implement vmemmap_remove_mapping() for BOOK3S
powerpc: implement vmemmap_list_free()
powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE
powerpc/book3s: Fix endianess issue for HMI handling on napping cpus.
powerpc/book3s: handle HMIs for cpus in nap mode.
powerpc/powernv: Invoke opal call to handle hmi.
powerpc/book3s: Add basic infrastructure to handle HMI in Linux.
powerpc/iommu: Fix comments with it_page_shift
powerpc/powernv: Handle compound PE in config accessors
powerpc/powernv: Handle compound PE for EEH
powerpc/powernv: Handle compound PE
powerpc/powernv: Split ioda_eeh_get_state()
powerpc/powernv: Allow to freeze PE
powerpc/powernv: Enable M64 aperatus for PHB3
powerpc/eeh: Aux PE data for error log
...
Linus Torvalds [Thu, 7 Aug 2014 15:47:00 +0000 (08:47 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for 3.17. It contains:
- misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy updates
- MIPS ptrace updates and cleanups
- various fixes that will also go to -stable
- a number of cleanups and small non-critical fixes.
- NUMA support for the Loongson 3.
- more support for MSA
- support for MAAR
- various FP enhancements and fixes"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits)
MIPS: jz4740: remove unnecessary null test before debugfs_remove
MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive
MIPS: ZBOOT: implement stack protector in compressed boot phase
MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT
MIPS: Bonito64: remove a duplicate define
MIPS: Malta: initialise MAARs
MIPS: Initialise MAARs
MIPS: detect presence of MAARs
MIPS: define MAAR register accessors & bits
MIPS: mark MSA experimental
MIPS: Don't build MSA support unless it can be used
MIPS: consistently clear MSA flags when starting & copying threads
MIPS: 16 byte align MSA vector context
MIPS: disable preemption whilst initialising MSA
MIPS: ensure MSA gets disabled during boot
MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains
MIPS: fix MSA context for tasks which don't use FP first
MIPS: init upper 64b of vector registers when MSA is first used
MIPS: save/disable MSA in lose_fpu
MIPS: preserve scalar FP CSR when switching vector context
...
Linus Torvalds [Thu, 7 Aug 2014 15:41:00 +0000 (08:41 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
"Mostly cleanups and bug-fixes, with two exceptions.
The first is lazy flushing of I/O-TLBs for PCI to improve performance,
the second is software dirty bits in the pmd for the madvise-free
implementation"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
s390/locking: Reenable optimistic spinning
s390/mm: implement dirty bits for large segment table entries
KVM: s390/mm: Fix page table locking vs. split pmd lock
s390/dasd: fix camel case
s390/3215: fix hanging console issue
s390/irq: improve displayed interrupt order in /proc/interrupts
s390/seccomp: fix error return for filtered system calls
s390/pci: introduce lazy IOTLB flushing for DMA unmap
dasd: fix error recovery for alias devices during format
dasd: fix list_del corruption during format
dasd: fix unresponsive device during format
dasd: use aliases for formatted devices during format
s390/pci: fix kmsg component
s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE
s390/watchdog: Fix module name in Kconfig help text
s390/dasd: replace seq_printf by seq_puts
s390/dasd: replace pr_warning by pr_warn
s390/dasd: Move EXPORT_SYMBOL after function/variable
s390/dasd: remove unnecessary null test before debugfs_remove
s390/zfcp: use qdio buffer helpers
...
Linus Torvalds [Thu, 7 Aug 2014 04:14:42 +0000 (21:14 -0700)]
Merge branch 'akpm' (patchbomb from Andrew Morton)
Merge incoming from Andrew Morton:
- Various misc things.
- arch/sh updates.
- Part of ocfs2. Review is slow.
- Slab updates.
- Most of -mm.
- printk updates.
- lib/ updates.
- checkpatch updates.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits)
checkpatch: update $declaration_macros, add uninitialized_var
checkpatch: warn on missing spaces in broken up quoted
checkpatch: fix false positives for --strict "space after cast" test
checkpatch: fix false positive MISSING_BREAK warnings with --file
checkpatch: add test for native c90 types in unusual order
checkpatch: add signed generic types
checkpatch: add short int to c variable types
checkpatch: add for_each tests to indentation and brace tests
checkpatch: fix brace style misuses of else and while
checkpatch: add --fix option for a couple OPEN_BRACE misuses
checkpatch: use the correct indentation for which()
checkpatch: add fix_insert_line and fix_delete_line helpers
checkpatch: add ability to insert and delete lines to patch/file
checkpatch: add an index variable for fixed lines
checkpatch: warn on break after goto or return with same tab indentation
checkpatch: emit a warning on file add/move/delete
checkpatch: add test for commit id formatting style in commit log
checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings
checkpatch: improve "no space after cast" test
checkpatch: allow multiple const * types
...
Pull networking fixes from David Miller:
"This fixes the most immediate fallout from yesterday's networking
merge:
1) sock_tx_timestamp() must not clear the passed in tx_flags, but
rather add to them. Fix from Eric Dumazet.
2) The hyperv driver sendbuf region increase needs to be decreased
slightly to handle older backends. From KY Srinivasan.
3) Fix RCU lockdep splats in netlink diag after recent hashing
changes, from Thomas Graf.
4) The new IPV6_FLOWLABEL was given a socket option number that
overlapped with an existing IP6 tables one, breaking ip6_tables.
Fixed by Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netlink: hold nl_sock_hash_lock during diag dump
tcp: md5: check md5 signature without socket lock
net: fix USB network driver config option.
net: reallocate new socket option number for IPV6_AUTOFLOWLABEL
vmxnet3: fix decimal printf format specifiers prefixed with 0x
net-timestamp: cumulative tcp timestamping fixes
hyperv: Adjust the size of sendbuf region to support ws2008r2
cxgb4: Fix for SR-IOV VF initialization
net-timestamp: sock_tx_timestamp() fix
Linus Torvalds [Thu, 7 Aug 2014 04:03:53 +0000 (21:03 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree changes from Jiri Kosina:
"Summer edition of trivial tree updates"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
doc: fix two typos in watchdog-api.txt
irq-gic: remove file name from heading comment
MAINTAINERS: Add miscdevice.h to file list for char/misc drivers.
scsi: mvsas: mv_sas.c: Fix for possible null pointer dereference
doc: replace "practise" with "practice" in Documentation
befs: remove check for CONFIG_BEFS_RW
scsi: doc: fix 'SCSI_NCR_SETUP_MASTER_PARITY'
drivers/usb/phy/phy.c: remove a leading space
mfd: fix comment
cpuidle: fix comment
doc: hpfall.c: fix missing null-terminate after strncpy call
usb: doc: hotplug.txt code typos
kbuild: fix comment in Makefile.modinst
SH: add proper prompt to SH_MAGIC_PANEL_R2_VERSION
ARM: msm: Remove MSM_SCM
crypto: Remove MPILIB_EXTRA
doc: CN: remove dead link, kerneltrap.org no longer works
media: update reference, kerneltrap.org no longer works
hexagon: update reference, kerneltrap.org no longer works
doc: LSM: update reference, kerneltrap.org no longer works
...
Linus Torvalds [Thu, 7 Aug 2014 03:56:28 +0000 (20:56 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
"Some highlights:
- hid-sony improvements of Sixaxis device support by Antonio Ospite
- hid-hyperv driven devices can now be used as wakeup source, by
Dexuan Cui
- hid-lenovo driver is now more generic and supports more devices, by
Jamie Lentin
- hid-huion now supports wider range of tablets, by Nikolai
Kondrashov
- other various unsorted fixes and device ID additions"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits)
HID: hyperv: register as a wakeup source
HID: sony: Default initialize all elements of the LED max_brightness array to 1
HID: huion: Fix sparse warnings
HID: usbhid: Use flag HID_DISCONNECTED when a usb device is removed
HID: ignore jabra gn9350e
HID: cp2112: add I2C mode
HID: use multi input quirk for 22b9:2968
HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices
HID: rmi: check that report ids exist in the report_id_hash before accessing their size
HID: lenovo: Add support for Compact (BT|USB) keyboard
HID: lenovo: Don't call function in condition, show error codes
HID: lenovo: Prepare support for adding other devices
HID: lenovo: Rename hid-lenovo-tpkbd to hid-lenovo
HID: huion: Handle tablets with UC-Logic vendor ID
HID: huion: Switch to generating report descriptor
HID: huion: Don't ignore other interfaces
HID: huion: Use "tablet" instead of specific model
HID: add quirk for 0x04d9:0xa096 device
HID: i2c-hid: call the hid driver's suspend and resume callbacks
HID: rmi: change logging level of log messages related to unexpected reports
...
Linus Torvalds [Thu, 7 Aug 2014 03:54:47 +0000 (20:54 -0700)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- remove unnecessary checks after platform_get_resource()
- fix watchdog api documentation typo's
- imx2_wdt: adds big endianness support
- move restart code to the sunxi watchdog driver
* git://www.linux-watchdog.org/linux-watchdog:
wdt: sunxi: Move restart code to the watchdog driver
Documentation: fix two typos in watchdog-api.txt
watchdog: imx2_wdt: adds big endianness support.
watchdog: shwdt: Remove the unnecessary check of resource after platform_get_resource()
watchdog: lantiq_wdt: Remove the un-necessary check of resource after platform_get_resource()
watchdog: dw_wdt: Remove the un-necessary check after platform_get_resource()
Linus Torvalds [Thu, 7 Aug 2014 03:34:19 +0000 (20:34 -0700)]
Merge tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"Again, ACPICA leads the pack (47 commits), followed by cpufreq (18
commits) and system suspend/hibernation (9 commits).
From the new code perspective, the ACPICA update brings ACPI 5.1 to
the table, including a new device configuration object called _DSD
(Device Specific Data) that will hopefully help us to operate device
properties like Device Trees do (at least to some extent) and changes
related to supporting ACPI on ARM.
Apart from that we have hibernation changes making it use radix trees
to store memory bitmaps which should speed up some operations carried
out by it quite significantly. We also have some power management
changes related to suspend-to-idle (the "freeze" sleep state) support
and more preliminary changes needed to support ACPI on ARM (outside of
ACPICA).
The rest is fixes and cleanups pretty much everywhere.
Specifics:
- ACPICA update to upstream version 20140724. That includes ACPI 5.1
material (support for the _CCA and _DSD predefined names, changes
related to the DMAR and PCCT tables and ARM support among other
things) and cleanups related to using ACPICA's header files. A
major part of it is related to acpidump and the core code used by
that utility. Changes from Bob Moore, David E Box, Lv Zheng,
Sascha Wildner, Tomasz Nowicki, Hanjun Guo.
- Radix trees for memory bitmaps used by the hibernation core from
Joerg Roedel.
- Support for waking up the system from suspend-to-idle (also known
as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
(Rafael J Wysocki).
- Fixes for issues related to ACPI button events (Rafael J Wysocki).
- New device ID for an ACPI-enumerated device included into the
Wildcat Point PCH from Jie Yang.
- ACPI video updates related to backlight handling from Hans de Goede
and Linus Torvalds.
- Preliminary changes needed to support ACPI on ARM from Hanjun Guo
and Graeme Gregory.
- ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.
- Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
(Rafael J Wysocki).
- ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J
Wysocki.
- Cleanups and improvements related to system suspend from Lan
Tianyu, Randy Dunlap and Rafael J Wysocki.
- ACPI battery cleanup from Wei Yongjun.
- cpufreq core fixes from Viresh Kumar.
- Elimination of a deadband effect from the cpufreq ondemand governor
and intel_pstate driver cleanups from Stratos Karafotis.
- 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas
Patocka.
- Fix for the imx6 cpufreq driver from Anson Huang.
- cpuidle core and governor cleanups from Daniel Lezcano, Sandeep
Tripathy and Mohammad Merajul Islam Molla.
- Build fix for the big_little cpuidle driver from Sachin Kamat.
- Configuration fix for the Operation Performance Points (OPP)
framework from Mark Brown.
- APM cleanup from Jean Delvare.
- cpupower utility fixes and cleanups from Peter Senna Tschudin,
Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas
Renninger"
* tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits)
ACPI / LPSS: add LPSS device for Wildcat Point PCH
ACPI / PNP: Replace faulty is_hex_digit() by isxdigit()
ACPICA: Update version to 20140724.
ACPICA: ACPI 5.1: Update for PCCT table changes.
ACPICA/ARM: ACPI 5.1: Update for GTDT table changes.
ACPICA/ARM: ACPI 5.1: Update for MADT changes.
ACPICA/ARM: ACPI 5.1: Update for FADT changes.
ACPICA: ACPI 5.1: Support for the _CCA predifined name.
ACPICA: ACPI 5.1: New notify value for System Affinity Update.
ACPICA: ACPI 5.1: Support for the _DSD predefined name.
ACPICA: Debug object: Add current value of Timer() to debug line prefix.
ACPICA: acpihelp: Add UUID support, restructure some existing files.
ACPICA: Utilities: Fix local printf issue.
ACPICA: Tables: Update for DMAR table changes.
ACPICA: Remove some extraneous printf arguments.
ACPICA: Update for comments/formatting. No functional changes.
ACPICA: Disassembler: Add support for the ToUUID opererator (macro).
ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro.
ACPICA: Work around an ancient GCC bug.
ACPI / processor: Make it possible to get local x2apic id via _MAT
...
Linus Torvalds [Thu, 7 Aug 2014 03:10:32 +0000 (20:10 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This patch set consists of the usual driver updates (ufs, storvsc,
pm8001 hpsa). It also has removal of the user space target driver
code (everyone is using LIO now), a partial PCI MSI-X update, more
multi-queue updates, conversion to 64 bit LUNs (so we could
theoretically cope with any LUN returned by a device) and placeholder
support for the ZBC device type (Shingle drives), plus an assortment
of minor updates and bug fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (143 commits)
scsi: do not issue SCSI RSOC command to Promise Vtrak E610f
vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix()
pm8001: Fix invalid return when request_irq() failed
lpfc: Remove superfluous call to pci_disable_msix()
isci: Use pci_enable_msix_exact() instead of pci_enable_msix()
bfa: Use pci_enable_msix_exact() instead of pci_enable_msix()
bfa: Cleanup bfad_setup_intr() function
bfa: Do not call pci_enable_msix() after it failed once
fnic: Use pci_enable_msix_exact() instead of pci_enable_msix()
scsi: use short driver name for per-driver cmd slab caches
scsi_debug: support scsi-mq, queues and locks
Drivers: add blist flags
scsi: ufs: fix endianness sparse warnings
scsi: ufs: make undeclared functions static
bnx2i: Update driver version to 2.7.10.1
pm8001: fix a memory leak in nvmd_resp
pm8001: fix update_flash
pm8001: fix a memory leak in flash_update
pm8001: Cleaning up uninitialized variables
pm8001: Fix to remove null pointer checks that could never happen
...
Linus Torvalds [Thu, 7 Aug 2014 03:07:24 +0000 (20:07 -0700)]
Merge tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There've been many updates in ASoC side at this time, especially the
framework enhancement for multiple CODECs on a single DAI and more
componentization works.
The only major change in ALSA core is the addition of timestamp type
in sw_params field. This should behave in backward compatible way.
Other than that, there are lots of small changes and new drivers in
wide range, including a large code cut in HD-audio driver for
deprecated static quirks. Some highlights are below:
ALSA Core:
- Add the new timestamp type field to sw_params to choose
MONOTONIC_RAW type
HD-audio:
- Continued conversion to standard printk macros, generic code
cleanups
- Removal of obsoleted static quirk codes for Conexant and C-Media
codecs
- Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED,
Gigabyte BXBT-2807 mobo
- Intel Braswell support
ASoC:
- Support for multiple CODECs attached to a single DAI, enabling
systems with for example multiple DAC/speaker drivers on a single
link, contributed by Benoit Cousson based on work from Misael Lopez
Cruz
- Support for byte controls larger than 256 bytes based on the use of
TLVs contributed by Omair Mohammed Abdullah
- More componentisation work from Lars-Peter Clausen
- The remainder of the conversions of CODEC drivers to params_width()
by Mark Brown
- Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks,
Realtek RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas
Instruments TAS2552
- Lots of updates and fixes, especially to the DaVinci, Intel,
Freescale, Realtek, and rcar drivers"
* tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (402 commits)
ALSA: usb-audio: Whitespace cleanups for sound/usb/midi.*
ALSA: usb-audio: Respond to suspend and resume callbacks for MIDI input
sound/oss/pss: Remove typedefs pss_mixerdata and pss_confdata
sound/oss/opl3: Remove typedef opl_devinfo
ALSA: fireworks: fix specifiers in format strings for propper output
ASoC: imx-audmux: Use uintptr_t for port numbers
ASoC: davinci: Enable menuconfig entry for McASP
ASoC: fsl_asrc: Don't access members of config before checking it
ASoC: fsl_sarc_dma: Check pair before using it
ASoC: adau1977: Fix truncation warning on 64 bit architectures
ALSA: virtuoso: add Xonar Essence STX II support
ALSA: riptide: fix %d confusingly prefixed with 0x in format strings
ALSA: fireworks: fix %d confusingly prefixed with 0x in format strings
ALSA: hda - add codec ID for Braswell display audio codec
ALSA: hda - add PCI IDs for Intel Braswell
ALSA: usb-audio: Adjust Gamecom 780 volume level
ALSA: usb-audio: improve dmesg source grepability
ASoC: rt5670: Fix duplicate const warnings
ASoC: rt5670: Staticise non-exported symbols
ASoC: Intel: update stream only on stream IPC msgs
...
Linus Torvalds [Thu, 7 Aug 2014 03:06:14 +0000 (20:06 -0700)]
Merge tag 'hsi-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI changes from Sebastian Reichel:
"Misc fixes in SSI related drivers"
* tag 'hsi-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi: Fix return value check in ssi_debug_add_ctrl()
HSI: omap_ssi_port: Fix return value check in ssi_debug_add_port()
HSI: ssi_protocol: Fix sparse non static symbol warning
drivers/hsi/controllers/omap_ssi{,_port}.c: fix failure checks
Linus Torvalds [Thu, 7 Aug 2014 03:05:34 +0000 (20:05 -0700)]
Merge tag 'for-v3.17' of git://git.infradead.org/battery-2.6
Pull power supply changes from Sebastian Reichel:
- Added iPaq h3xxx battery driver
- Added Broadcom STB reset driver
- DT support for rx51-battery
- misc. fixes
* tag 'for-v3.17' of git://git.infradead.org/battery-2.6:
ipaq_micro_battery: fix sparse non static symbol warning
power: add driver for battery reading on iPaq h3xxx
power: twl4030_charger: detect battery presence prior to enabling charger
power: reset: Add reboot driver for brcmstb
power_supply: Fix sparse non static symbol warning
power_supply: Add inlmt,iterm, min/max temp props
charger: tps65090: Allow charger module to be used when no irq
power/reset: Fix GPL v2 license string typo
power: poweroff: gpio: convert to use descriptors
bq27000: report missing device better.
bq27x00_battery: Introduce the use of the managed version of kzalloc
Documentation: DT: Document rx51-battery binding
rx51_battery: convert to iio consumer
bq2415x_charger: Fix Atomic Sleep Bug
Thomas Graf [Wed, 6 Aug 2014 23:18:47 +0000 (00:18 +0100)]
netlink: hold nl_sock_hash_lock during diag dump
Although RCU protection would be possible during diag dump, doing
so allows for concurrent table mutations which can render the
in-table offset between individual Netlink messages invalid and
thus cause legitimate sockets to be skipped in the dump.
Since the diag dump is relatively low volume and consistency is
more important than performance, the table mutex is held during
dump.
Reported-by: Andrey Wagin <avagin@gmail.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Fixes: e341694e3eb57fc ("netlink: Convert netlink_lookup() to use RCU protected hash table") Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 6 Aug 2014 23:11:29 +0000 (16:11 -0700)]
checkpatch: warn on missing spaces in broken up quoted
Checkpatch already complains when people break up quoted strings but
it's still pretty common. One mistake that people often make is they
leave out the space character between the two strings.
This check adds around 450 new warnings and has a low rate of false
positives.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andy Whitcroft <apw@canonical.com> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Wed, 6 Aug 2014 23:11:27 +0000 (16:11 -0700)]
checkpatch: fix false positives for --strict "space after cast" test
Commit 89da401f6cff ("checkpatch: improve "no space after cast" test")
in -next improved the cast test for non pointer types, but also
introduced false positives for some types of static inlines.
Add a test for an open brace to the exclusions to avoid these false
positives.
Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Hartley Sweeten <HartleyS@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>