Josef Bacik [Mon, 7 Oct 2013 19:21:08 +0000 (15:21 -0400)]
Btrfs: free reserved space on error in a few places
While trying to track down a reserved space leak I noticed a few places where we
won't properly clean up reserved space if we have an error, this patch fixes
those up. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Mon, 7 Oct 2013 19:18:52 +0000 (15:18 -0400)]
Btrfs: fixup reserved trace points
In trying to track down where we were leaking reserved space I noticed our
reserve extent tracepoints are a little off. First we were saying that the
reserved space had been alloced in btrfs_reserve_extent, which isn't the case,
this needs to be triggered when we actually allocate the space when we run the
delayed ref. We were also missing a few places where we should have been
tracing the btrfs_reserve_extent_free tracepoint. With these in place I was
able to put together where we were leaking reserved space. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Mon, 7 Oct 2013 19:14:44 +0000 (15:14 -0400)]
Btrfs: free up block groups after everything
If we abort a transaction we will do the tree log cleanup at unmount, but this
happens after we free up the block groups. This makes all the leak detection
warnings go off because we think we've leaked space but in reality we just
haven't cleaned it up yet. So instead do the block group cleanup stuff after
free'ing the fs roots so we don't get these warnings. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Mon, 7 Oct 2013 19:11:00 +0000 (15:11 -0400)]
Btrfs: cleanup reserved space when freeing tree log on error
On error we will wait and free the tree log at unmount without a transaction.
This means that the actual freeing of the blocks doesn't happen which means we
complain about space leaks on unmount. So to fix this just skip the transaction
specific cleanup part of the tree log free'ing if we don't have a transaction
and that way we can free up our reserved space and our counters stay happy.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Mon, 7 Oct 2013 14:45:07 +0000 (10:45 -0400)]
Btrfs: do not free the dirty bytes from the trans block rsv on cleanup
The transactions should be cleaning up their reservations on failure, this just
causes us to have warnings on unmount because we go negative by free'ing
reservations that have already been free'ed. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: fix memory leaks on transaction commit failure
Structures of the types tree_mod_elem and qgroup_update are allocated
during transaction commit but were not being released if the call to
btrfs_run_delayed_items() returned an error.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Ilya Dryomov [Mon, 7 Oct 2013 10:42:57 +0000 (13:42 +0300)]
Btrfs: fix the dev-replace suspend sequence
Replace progresses strictly from lower to higher offsets, and the
progress is tracked in chunks, by storing the physical offset of the
dev_extent which is being copied in the cursor_left field of
btrfs_dev_replace_item. When we are done copying the chunk,
left_cursor is updated to point one byte past the dev_extent, so that
on resume we can skip the dev_extents that have already been copied.
There is a major bug (which goes all the way back to the inception of
dev-replace in 3.8) in the way left_cursor is bumped: the bump is done
unconditionally, without any regard to the scrub_chunk return value.
On suspend (and also on any kind of error) scrub_chunk returns early,
i.e. without completing the copy. This leads to us skipping the chunk
that hasn't been fully copied yet when resuming.
Fix this by doing the cursor_left update only if scrub_chunk ret is 0.
(On suspend scrub_chunk returns with -ECANCELED, so this fix covers
both suspend and error cases.)
Cc: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Currently the hash value used for adding an inode to the VFS's inode
hash table consists of the plain inode number, which is a 64 bits
integer. This results in hash table buckets (hlist_head lists) with
too many elements for at least 2 important scenarios:
1) When we have many subvolumes. Each subvolume has its own btree
where its files and directories are added to, and each has its
own objectid (inode number) namespace. This means that if we have
N subvolumes, and all have inode number X associated to a file or
directory, the corresponding inodes all map to the same hash table
entry, resulting in a bucket (hlist_head list) with N elements;
2) On 32 bits machines. Th VFS hash values are unsigned longs, which
are 32 bits wide on 32 bits machines, and the inode (objectid)
numbers are 64 bits unsigned integers. We simply cast the inode
numbers to hash values, which means that for all inodes with the
same 32 bits lower half, the same hash bucket is used for all of
them. For example, all inodes with a number (objectid) between
0x0000_0000_ffff_ffff and 0xffff_ffff_ffff_ffff will end up in
the same hash table bucket.
This change ensures the inode's hash value depends both on the
objectid (inode number) and its subvolume's (btree root) objectid.
For 32 bits machines, this change gives better entropy by making
the hash value depend on both the upper and lower 32 bits of the
64 bits hash previously computed.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: remove unnecessary tree search when logging inode
In tree-log.c:btrfs_log_inode(), we keep calling btrfs_search_forward()
until it returns a key whose objectid is higher than our inode or until
the key's type is higher than our maximum allowed type.
At the end of the loop, we increment our mininum search key's objectid
and type regardless of our desired target objectid and maximum desired
type, which causes another loop iteration that will call again
btrfs_search_forward() just to figure out we've gone beyond our maximum
key and exit the loop. Therefore while incrementing our minimum key,
don't do it blindly and exit the loop immiediately if the next search
key's objectid or type is beyond what we seek.
Also after incrementing the type, set the key's offset to 0, which was
missing and could make us loose some of the inode's items.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: remove unused max_key arg from btrfs_search_forward
It is not used for anything.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: improve jitter performance of the sequential buffered write
The performance was slowed down sometimes when we ran sysbench to measure
the performance of the sequential buffered write by 2 or more threads.
It was because the write order of the test threads might be confused
by the task scheduler, and the coming write would be beyond the end of
the file, in this case, we need insert dummy file extents and create
a hole for the area we skip. But in order to avoid the ongoing ordered
extents which are in the area, we need wait for them. Unfortunately,
the current code doesn't check if there are ordered extents in the area
or not, try to find and flush the dirty pages directly, but in fact,
there is no dirty page in that area, this step of the current code is
unnecessary, and just wastes time. Sometimes, it would increase
the contention of some locks, and makes the performance slow down suddenly.
So we remove the ordered extent flush function before the check, and flush
the dirty pages and wait for the ordered extents only when we find them.
According to my test, we got 1-2 times of the performance regression when
we ran the test by 10 times before applying this patch. After applying
this patch, the regression went away.
Test Environment:
CPU: 1CPU * 4Cores
Memory: 6GB
Partition: 20GB
Test Command:
# sysbench --test=fileio --file-total-size=16G --file-test-mode=seqwr \
> --num-threads=512 --file-block-size=16384 --max-time=60 --max-requests=0 run
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: fix BUG_ON() casued by the reserved space migration
When we did space balance and snapshot creation at the same time, we might
meet the following oops:
kernel BUG at fs/btrfs/inode.c:3038!
[SNIP]
Call Trace:
[<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs]
[<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs]
[<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs]
[<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs]
[<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs]
[<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379
[<ffffffff811215a9>] vfs_ioctl+0x1d/0x39
[<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2
[<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8
[<ffffffff81121e88>] SyS_ioctl+0x57/0x83
[<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14
[<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b
[SNIP]
RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs]
The reason of the problem is that the relocation root creation stole
the reserved space, which was reserved for orphan item deletion.
There are several ways to fix this problem, one is to increasing
the reserved space size of the space balace, and then we can use
that space to create the relocation tree for each fs/file trees.
But it is hard to calculate the suitable size because we doesn't
know how many fs/file trees we need relocate.
We fixed this problem by reserving the space for relocation root creation
actively since the space it need is very small (one tree block, used for
root node copy), then we use that reserved space to create the
relocation tree. If we don't reserve space for relocation tree creation,
we will use the reserved space of the balance.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Updated to be rebased against current upstream and correct diff supplied this time!
Signed-off-by: Ross Kirk <ross.kirk@gmail.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Mon, 30 Sep 2013 15:36:38 +0000 (11:36 -0400)]
Btrfs: fix two use-after-free bugs with transaction cleanup
I was noticing the slab redzone stuff going off every once and a while during
transaction aborts. This was caused by two things
1) We would walk the pending snapshots and set their error to -ECANCELED. We
don't need to do this, the snapshot stuff waits for a transaction commit and if
there is a problem we just free our pending snapshot object and exit. Doing
this was causing us to touch the pending snapshot object after the thing had
already been freed.
2) We were freeing the transaction manually with wanton disregard for it's
use_count reference counter. To fix this I cleaned up the transaction freeing
loop to either wait for the transaction commit to finish if it was in the middle
of that (since it will be cleaned and freed up there) or to do the cleanup
oursevles.
I also moved the global "kill all things dirty everywhere" stuff outside of the
transaction cleanup loop since that only needs to be done once. With this patch
I'm no longer seeing slab corruption because of use after frees. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Fri, 27 Sep 2013 20:36:02 +0000 (16:36 -0400)]
Btrfs: don't delete ordered roots from list during cleanup
During transaction cleanup after an abort we are just removing roots from the
ordered roots list which is incorrect. We have a BUG_ON() to make sure that the
root is still part of the ordered roots list when we put our ordered extent
which we were tripping in this case. So do like we do everywhere else and just
move it to the tail of the ordered roots list and allow the normal cleanup to
take care of stuff. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Fri, 27 Sep 2013 20:32:39 +0000 (16:32 -0400)]
Btrfs: cleanup transaction on abort
If we abort not during a transaction commit we won't clean up anything until we
unmount. Unfortunately if we abort in the middle of writing out an ordered
extent we won't clean it up and if somebody is waiting on that ordered extent
they will wait forever. To fix this just make the transaction kthread call the
cleanup transaction stuff if it notices theres an error, and make
btrfs_end_transaction wake up the transaction kthread if there is an error.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Fri, 27 Sep 2013 18:57:43 +0000 (14:57 -0400)]
Btrfs: do not release metadata for space cache inodes
I've been testing our error paths and I was tripping the BUG_ON() in
drop_outstanding_extent because our outstanding_extents is 0 for space cache
inodes. This is because we don't reserve metadata space for these inodes since
we depend on the global block reserve for our space. To fix this we need to
make sure the DO_ACCOUNTING stuff doesn't actually call release_metadata for
space cache inodes. With this patch I'm no longer panicing. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Fri, 27 Sep 2013 13:33:09 +0000 (09:33 -0400)]
Btrfs: relocate csums properly with prealloc extents
A user reported a problem where they were getting csum errors when running a
balance and running systemd's journal. This is because systemd is awesome and
fallocate()'s its log space and writes into it. Unfortunately we assume that
when we read in all the csums for an extent that they are sequential starting at
the bytenr we care about. This obviously isn't the case for prealloc extents,
where we could have written to the middle of the prealloc extent only, which
means the csum would be for the bytenr in the middle of our range and not the
front of our range. Fix this by offsetting the new bytenr we are logging to
based on the original bytenr the csum was for. With this patch I no longer see
the csum errors I was seeing. Thanks,
Cc: stable@vger.kernel.org Reported-by: Chris Murphy <lists@colorremedies.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In extent-tree.c:btrfs_write_dirty_block_groups(), if the call to
write_one_cache_group() failed, we would return without putting
the block group first.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: fix sync fs to actually wait for all data to be persisted
Currently the fs sync function (super.c:btrfs_sync_fs()) doesn't
wait for delayed work to finish before returning success to the
caller. This change fixes this, ensuring that there's no data loss
if a power failure happens right after fs sync returns success to
the caller and before the next commit happens.
Steps to reproduce the data loss issue:
$ mkfs.btrfs -f /dev/sdb3
$ mount /dev/sdb3 /mnt/btrfs
$ perl -e '$d = ("\x41" x 6001); open($f,">","/mnt/btrfs/foobar"); print $f $d; close($f);' && btrfs fi sync /mnt/btrfs
Right after the btrfs fi sync command (a second or 2 for example), power
off the machine and reboot it. The file will be empty, as it can be verified
after mounting the filesystem and through btrfs-debug-tree:
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In inode.c:btrfs_orphan_add() if we failed to insert the orphan
item, we would return without decrementing the orphan count that
we just incremented before attempting the insertion, leaving the
orphan inode count wrong.
In inode.c:btrfs_orphan_del(), we were decrementing the inode
orphan count if the bit BTRFS_INODE_ORPHAN_META_RESERVED was set,
which is logically wrong because it should be decremented if the
bit BTRFS_INODE_HAS_ORPHAN_ITEM was set - after all we increment
the count when we set the bit BTRFS_INODE_HAS_ORPHAN_ITEM elsewhere.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Liu Bo [Sun, 22 Sep 2013 04:54:23 +0000 (12:54 +0800)]
Btrfs: export btrfs space shared info to userspace
Similar to ocfs2, btrfs also supports that extents can be shared by
different inodes, and there are some userspace tools requesting
for this kind of 'space shared infomation'.[1]
ocfs2 uses flag FIEMAP_EXTENT_SHARED, so does btrfs.
Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: remove path arg from btrfs_truncate_free_space_cache
Not used for anything, and removing it avoids caller's need to
allocate a path structure.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We're doing a unnecessary extra lookup of the ino cache's
inode when we already have it (and holding a reference)
during the process of saving the ino cache contents to disk.
Therefore remove this extra lookup.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Tue, 24 Sep 2013 18:09:34 +0000 (14:09 -0400)]
Btrfs: do a full search everytime in btrfs_search_old_slot
While running some snashot aware defrag tests I noticed I was panicing every
once and a while in key_search. This is because of the optimization that says
if we find a key at slot 0 it will be at slot 0 all the way down the rest of the
tree. This isn't the case for btrfs_search_old_slot since it will likely replay
changes to a buffer if something has changed since we took our sequence number.
So short circuit this optimization by setting prev_cmp to -1 every time we call
key_search so we will do our normal binary search. With this patch I am no
longer seeing the panics I was seeing before. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Thu, 19 Sep 2013 20:07:01 +0000 (16:07 -0400)]
Btrfs: add a sanity test for btrfs_split_item
While looking at somebodys corruption I became completely convinced that
btrfs_split_item was broken, so I wrote this test to verify that it was working
as it was supposed to. Thankfully it appears to be working as intended, so just
add this test to make sure nobody breaks it in the future. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Ross Kirk [Mon, 16 Sep 2013 14:58:09 +0000 (15:58 +0100)]
btrfs: drop unused parameter from btrfs_item_nr
Remove unused eb parameter from btrfs_item_nr
Signed-off-by: Ross Kirk <ross.kirk@gmail.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
It is not necessary to store the NULL byte in a symlink inline file
extent. There's currently no code that requires the NULL byte to be
present in the extent. This change also doesn't break file format
compatibility nor the send/receive feature.
The VFS also doesn't need the NULL byte to be present in the extent,
as it reads up to inode->i_size bytes (which already excluded the NULL
byte) and sets the NULL byte for us (in fs/namei.c:page_getlink()).
So with this change we save 1 byte per symlink file extent (which is
always inlined in the btree leaf) without losing backward and forward
compatibility.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Stefan Behrens [Thu, 5 Sep 2013 14:58:43 +0000 (16:58 +0200)]
Btrfs: eliminate the exceptional root_tree refs=0
The fact that btrfs_root_refs() returned 0 for the tree_root caused
bugs in the past, therefore it is set to 1 with this patch and
(hopefully) all affected code is adapted to this change.
I verified this change by temporarily adding WARN_ON() checks
everywhere where btrfs_root_refs() is used, checking whether the
logic of the code is changed by btrfs_root_refs() returning 1
instead of 0 for root->root_key.objectid == BTRFS_ROOT_TREE_OBJECTID.
With these added checks, I ran the xfstests './check -g auto'.
The two roots chunk_root and log_root_tree that are only referenced
by the superblock and the log_roots below the log_root_tree still
have btrfs_root_refs() == 0, only the tree_root is changed.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Linus Torvalds [Sun, 3 Nov 2013 19:36:41 +0000 (11:36 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Three fixes across arch/mips with the most complex one being the GIC
interrupt fix - at nine lines still not monster. I'm confident this
are the final MIPS patches even if there should go for an rc8"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: ralink: fix return value check in rt_timer_probe()
MIPS: malta: Fix GIC interrupt offsets
MIPS: Perf: Fix 74K cache map
Mathias Krause [Sun, 3 Nov 2013 11:36:28 +0000 (12:36 +0100)]
ipc, msg: forbid negative values for "msg{max,mnb,mni}"
Negative message lengths make no sense -- so don't do negative queue
lenghts or identifier counts. Prevent them from getting negative.
Also change the underlying data types to be unsigned to avoid hairy
surprises with sign extensions in cases where those variables get
evaluated in unsigned expressions with bigger data types, e.g size_t.
In case a user still wants to have "unlimited" sizes she could just use
INT_MAX instead.
Vineet Gupta [Sat, 2 Nov 2013 12:17:49 +0000 (17:47 +0530)]
ARC: Incorrect mm reference used in vmalloc fault handler
A vmalloc fault needs to sync up PGD/PTE entry from init_mm to current
task's "active_mm". ARC vmalloc fault handler however was using mm.
A vmalloc fault for non user task context (actually pre-userland, from
init thread's open for /dev/console) caused the handler to deref NULL mm
(for mm->pgd)
The reasons it worked so far is amazing:
1. By default (!SMP), vmalloc fault handler uses a cached value of PGD.
In SMP that MMU register is repurposed hence need for mm pointer deref.
2. In pre-3.12 SMP kernel, the problem triggering vmalloc didn't exist in
pre-userland code path - it was introduced with commit 20bafb3d23d108bc
"n_tty: Move buffers into n_tty_data"
Ming Lei [Fri, 1 Nov 2013 22:41:33 +0000 (09:11 +1030)]
scripts/kallsyms: filter symbols not in kernel address space
This patch uses CONFIG_PAGE_OFFSET to filter symbols which
are not in kernel address space because these symbols are
generally for generating code purpose and can't be run at
kernel mode, so we needn't keep them in /proc/kallsyms.
For example, on ARM there are some symbols which may be
linked in relocatable code section, then perf can't parse
symbols any more from /proc/kallsyms, this patch fixes the
problem (introduced b9b32bf70f2fb710b07c94e13afbc729afe221da)
Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@vger.kernel.org
Linus Torvalds [Fri, 1 Nov 2013 19:23:56 +0000 (12:23 -0700)]
Merge tag 'usb-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here is a set of patches that revert all of the changes done to the
pl2303 USB serial driver in the 3.12-rc timeframe, as it turns out
they break some devices that work just fine on 3.11. As it's not a
good idea to break working systems, drop them all and they will be
reworked for future kernel versions such that there is no breakage.
I've also included a MAINTAINERS update for the USB serial subsystem
and a new device id for the ftdi_sio driver as well"
* tag 'usb-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: ftdi_sio: add id for Z3X Box device
USB: Maintainers change for usb serial drivers
Revert "USB: pl2303: restrict the divisor based baud rate encoding method to the "HX" chip type"
Revert "usb: pl2303: fix+improve the divsor based baud rate encoding method"
Revert "usb: pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method"
Revert "usb: pl2303: remove 500000 baud from the list of standard baud rates"
Revert "usb: pl2303: move the two baud rate encoding methods to separate functions"
Revert "usb: pl2303: increase the allowed baud rate range for the divisor based encoding method"
Revert "usb: pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips"
Revert "usb: pl2303: add two comments concerning the supported baud rates with HX chips"
Revert "pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()"
Revert "pl2303: improve the chip type information output on startup"
Revert "pl2303: improve the chip type detection/distinction"
Revert "USB: pl2303: distinguish between original and cloned HX chips"
Linus Torvalds [Fri, 1 Nov 2013 19:23:22 +0000 (12:23 -0700)]
Merge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound fixes from Takashi Iwai:
"The fixes for random bugs that have been reported lately in the game:
a few fixes in ASoC dpam and wm_hubs bugs spotted by Coverity, a
one-liner HD-audio fixup, and a fix for Oops with DPCM.
They are not so critically urgent bugs, but all small and safe"
* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: fix oops in snd_pcm_info() caused by ASoC DPCM
ASoC: wm_hubs: Add missing break in hp_supply_event()
ALSA: hda - Add a fixup for ASUS N76VZ
ASoC: dapm: Return -ENOMEM in snd_soc_dapm_new_dai_widgets()
ASoC: dapm: Fix source list debugfs outputs
Linus Torvalds [Fri, 1 Nov 2013 19:22:47 +0000 (12:22 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux
Pull clock subsystem fixes from Mike Turquette.
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
clk: fixup argument order when setting VCO parameters
clk: socfpga: Fix incorrect sdmmc clock name
clk: armada-370: fix tclk frequencies
clk: nomadik: set all timers to use 2.4 MHz TIMCLK
Greg Thelen [Fri, 1 Nov 2013 19:16:59 +0000 (12:16 -0700)]
memcg: remove incorrect underflow check
When a memcg is deleted mem_cgroup_reparent_charges() moves charged
memory to the parent memcg. As of v3.11-9444-g3ea67d0 "memcg: add per
cgroup writeback pages accounting" there's bad pointer read. The goal
was to check for counter underflow. The counter is a per cpu counter
and there are two problems with the code:
(1) per cpu access function isn't used, instead a naked pointer is used
which easily causes oops.
(2) the check doesn't sum all cpus
The fix is to remove the check. It's currently dangerous and isn't
worth fixing it to use something expensive, such as
percpu_counter_sum(), for each reparented page. __this_cpu_read() isn't
enough to fix this because there's no guarantees of the current cpus
count. The only guarantees is that the sum of all per-cpu counter is >=
nr_pages.
Greg KH [Wed, 30 Oct 2013 18:07:31 +0000 (11:07 -0700)]
USB: Maintainers change for usb serial drivers
Johan has been conned^Wgracious in accepting the maintainership of the
USB serial drivers, especially as he's been doing all of the real work
for the past few years.
At the same time, remove a bunch of old entries for USB serial drivers
that don't make sense anymore, given that the developers are no longer
around, and individual driver maintainerships for tiny things like this
is pretty pointless.
Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip. This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 31 Oct 2013 23:58:23 +0000 (16:58 -0700)]
Merge branch 'akpm' (fixes from Andrew Morton)
Merge four more fixes from Andrew Morton.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib/scatterlist.c: don't flush_kernel_dcache_page on slab page
mm: memcg: fix test for child groups
mm: memcg: lockdep annotation for memcg OOM lock
mm: memcg: use proper memcg in limit bypass
Ming Lei [Thu, 31 Oct 2013 23:34:17 +0000 (16:34 -0700)]
lib/scatterlist.c: don't flush_kernel_dcache_page on slab page
Commit b1adaf65ba03 ("[SCSI] block: add sg buffer copy helper
functions") introduces two sg buffer copy helpers, and calls
flush_kernel_dcache_page() on pages in SG list after these pages are
written to.
Unfortunately, the commit may introduce a potential bug:
- Before sending some SCSI commands, kmalloc() buffer may be passed to
block layper, so flush_kernel_dcache_page() can see a slab page
finally
- According to cachetlb.txt, flush_kernel_dcache_page() is only called
on "a user page", which surely can't be a slab page.
- ARCH's implementation of flush_kernel_dcache_page() may use page
mapping information to do optimization so page_mapping() will see the
slab page, then VM_BUG_ON() is triggered.
Aaro Koskinen reported the bug on ARM/kirkwood when DEBUG_VM is enabled,
and this patch fixes the bug by adding test of '!PageSlab(miter->page)'
before calling flush_kernel_dcache_page().
Signed-off-by: Ming Lei <ming.lei@canonical.com> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Tejun Heo <tj@kernel.org> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> [3.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Thu, 31 Oct 2013 23:34:15 +0000 (16:34 -0700)]
mm: memcg: fix test for child groups
When memcg code needs to know whether any given memcg has children, it
uses the cgroup child iteration primitives and returns true/false
depending on whether the iteration loop is executed at least once or
not.
Because a cgroup's list of children is RCU protected, these primitives
require the RCU read-lock to be held, which is not the case for all
memcg callers. This results in the following splat when e.g. enabling
hierarchy mode:
In the memcg case, we only care about children when we are attempting to
modify inheritable attributes interactively. Racing with deletion could
mean a spurious -EBUSY, no problem. Racing with addition is handled
just fine as well through the memcg_create_mutex: if the child group is
not on the list after the mutex is acquired, it won't be initialized
from the parent's attributes until after the unlock.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Thu, 31 Oct 2013 23:34:13 +0000 (16:34 -0700)]
mm: memcg: use proper memcg in limit bypass
Commit 84235de394d9 ("fs: buffer: move allocation failure loop into the
allocator") allowed __GFP_NOFAIL allocations to bypass the limit if they
fail to reclaim enough memory for the charge. But because the main test
case was on a 3.2-based system, the patch missed the fact that on newer
kernels the charge function needs to return root_mem_cgroup when
bypassing the limit, and not NULL. This will corrupt whatever memory is
at NULL + percpu pointer offset. Fix this quickly before problems are
reported.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 31 Oct 2013 22:43:02 +0000 (15:43 -0700)]
vfs: decrapify dput(), fix cache behavior under normal load
We do not want to dirty the dentry->d_flags cacheline in dput() just to
set the DCACHE_REFERENCED flag when it is already set in the common case
anyway. This way the first cacheline of the dentry (which contains the
RCU lookup information etc) can stay shared among multiple CPU's.
This finishes off some of the details of all the scalability patches
merged during the merge window.
Also don't mark dentry_kill() for inlining, since it's the uncommon path
and inlining it just makes the common path slower due to extra function
entry/exit overhead.
Linus Torvalds [Thu, 31 Oct 2013 22:21:26 +0000 (15:21 -0700)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull NUMA balancing memory corruption fixes from Ingo Molnar:
"So these fixes are definitely not something I'd like to sit on, but as
I said to Mel at the KS the timing is quite tight, with Linus planning
v3.12-final within a week.
These 6 commits are a minimalized set of cherry-picks needed to fix
the memory corruption bugs. All commits are fixes, except "mm: numa:
Sanitize task_numa_fault() callsites" which is a cleanup that made two
followup fixes simpler.
I've done targeted testing with just this SHA1 to try to make sure
there are no cherry-picking artifacts. The original non-cherry-picked
set of fixes were exposed to linux-next for a couple of weeks"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm: Account for a THP NUMA hinting update as one PTE update
mm: Close races between THP migration and PMD numa clearing
mm: numa: Sanitize task_numa_fault() callsites
mm: Prevent parallel splits during THP migration
mm: Wait for THP migrations to complete during NUMA hinting faults
mm: numa: Do not account for a hinting fault if we raced
Linus Torvalds [Thu, 31 Oct 2013 17:38:59 +0000 (10:38 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"A bit later than I would want, but the changes are very minor - a few
new device IDs for new hardware in existing drivers, fix for battery
in Wacom devices not be considered system battery and cause emergency
hibernations, and a couple of other bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ALPS - add support for model found on Dell XT2
Input: wacom - add support for ISDv4 0x10E sensor
Input: wacom - add support for ISDv4 0x10F sensor
Input: wacom - export battery scope
Input: cm109 - convert high volume dev_err() to dev_err_ratelimited()
Input: move name/timer init to input_alloc_dev()
Input: i8042 - i8042_flush fix for a full 8042 buffer
Input: pxa27x_keypad - fix NULL pointer dereference
Linus Torvalds [Thu, 31 Oct 2013 17:13:28 +0000 (10:13 -0700)]
Merge tag 'pm+acpi-3.12-late' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael J Wysocki:
"Last-minute ACPI and power management fixes for 3.12
- Revert epoll and select commits related to the freezer, introduced
during the 3.11 cycle, that cause mysterious user space breakage to
occur during resume from suspend to RAM for multiple users of
32-bit x86 systems. Material for 3.11.y stable kernels.
- Revert a recent ACPI-based PCI hotplug (ACPIPHP) commit that was
part of boot problem fixes for one machine, but turns out to cause
issues with hotplug on Thunderbolt chains with multiple devices.
It also turns out to be unnecessary after another fix in the same
area that went in later. From Mika Westerberg"
* tag 'pm+acpi-3.12-late' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / hotplug / PCI: Avoid doing too much for spurious notifies"
Revert "select: use freezable blocking call"
Revert "epoll: use freezable blocking call"
This is provoked when the ASoC front end is open along with its backend,
(which causes the backend to have a runtime assigned to it) and then the
SNDRV_CTL_IOCTL_PCM_INFO is requested for the (visible) backend device.
Resolve this by ensuring that ASoC internal backend devices are not
visible to userspace, just as the commentry for snd_pcm_new_internal()
says it should be.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark Brown <broonie@linaro.org> Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
Wei Yongjun [Thu, 31 Oct 2013 07:51:38 +0000 (15:51 +0800)]
MIPS: ralink: fix return value check in rt_timer_probe()
In case of error, the function devm_request_and_ioremap() returns NULL
pointer not ERR_PTR(). Fix it by using devm_ioremap_resource() instead
of devm_request_and_ioremap().
Dave Airlie [Thu, 31 Oct 2013 05:29:10 +0000 (15:29 +1000)]
Merge branch 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Just a few small fixes for radeon (audio regression fix,
stability fix, and an endian bug noticed by coverity).
* 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: fix incompatible casting on big endian
drm/radeon: disable bapm on KB
drm/radeon: use sw CTS/N values for audio on DCE4+
Linus Torvalds [Wed, 30 Oct 2013 21:27:10 +0000 (14:27 -0700)]
Merge branch 'akpm' (fixes from Andrew Morton)
Merge three fixes from Andrew Morton.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
memcg: use __this_cpu_sub() to dec stats to avoid incorrect subtrahend casting
percpu: fix this_cpu_sub() subtrahend casting for unsigneds
mm/pagewalk.c: fix walk_page_range() access of wrong PTEs
Greg Thelen [Wed, 30 Oct 2013 20:56:21 +0000 (13:56 -0700)]
memcg: use __this_cpu_sub() to dec stats to avoid incorrect subtrahend casting
As of commit 3ea67d06e467 ("memcg: add per cgroup writeback pages
accounting") memcg counter errors are possible when moving charged
memory to a different memcg. Charge movement occurs when processing
writes to memory.force_empty, moving tasks to a memcg with
memcg.move_charge_at_immigrate=1, or memcg deletion.
An example showing error after memory.force_empty:
mapped_file should end with 0. 4503599627370496 == 0x10,0000,0000,0000 == 0x100,0000,0000 pages 1048576 == 0x10,0000 == 0x100 pages
This issue only affects the source memcg on 64 bit machines; the
destination memcg counters are correct. So the rmdir case is not too
important because such counters are soon disappearing with the entire
memcg. But the memcg.force_empty and memory.move_charge_at_immigrate=1
cases are larger problems as the bogus counters are visible for the
(possibly long) remaining life of the source memcg.
The problem is due to memcg use of __this_cpu_from(.., -nr_pages), which
is subtly wrong because it subtracts the unsigned int nr_pages (either
-1 or -512 for THP) from a signed long percpu counter. When
nr_pages=-1, -nr_pages=0xffffffff. On 64 bit machines stat->count[idx]
is signed 64 bit. So memcg's attempt to simply decrement a count (e.g.
from 1 to 0) boils down to:
long count = 1
unsigned int nr_pages = 1
count += -nr_pages /* -nr_pages == 0xffff,ffff */
count is now 0x1,0000,0000 instead of 0
The fix is to subtract the unsigned page count rather than adding its
negation. This only works once "percpu: fix this_cpu_sub() subtrahend
casting for unsigneds" is applied to fix this_cpu_sub().
Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Thelen [Wed, 30 Oct 2013 20:56:20 +0000 (13:56 -0700)]
percpu: fix this_cpu_sub() subtrahend casting for unsigneds
this_cpu_sub() is implemented as negation and addition.
This patch casts the adjustment to the counter type before negation to
sign extend the adjustment. This helps in cases where the counter type
is wider than an unsigned adjustment. An alternative to this patch is
to declare such operations unsupported, but it seemed useful to avoid
surprises.
This patch specifically helps the following example:
unsigned int delta = 1
preempt_disable()
this_cpu_write(long_counter, 0)
this_cpu_sub(long_counter, delta)
preempt_enable()
Before this change long_counter on a 64 bit machine ends with value
0xffffffff, rather than 0xffffffffffffffff. This is because
this_cpu_sub(pcp, delta) boils down to this_cpu_add(pcp, -delta),
which is basically:
long_counter = 0 + 0xffffffff
Also apply the same cast to:
__this_cpu_sub()
__this_cpu_sub_return()
this_cpu_sub_return()
All percpu_test.ko passes, especially the following cases which
previously failed:
l -= ui_one;
__this_cpu_sub(long_counter, ui_one);
CHECK(l, long_counter, -1);
Chen LinX [Wed, 30 Oct 2013 20:56:18 +0000 (13:56 -0700)]
mm/pagewalk.c: fix walk_page_range() access of wrong PTEs
When walk_page_range walk a memory map's page tables, it'll skip
VM_PFNMAP area, then variable 'next' will to assign to vma->vm_end, it
maybe larger than 'end'. In next loop, 'addr' will be larger than
'next'. Then in /proc/XXXX/pagemap file reading procedure, the 'addr'
will growing forever in pagemap_pte_range, pte_to_pagemap_entry will
access the wrong pte.
BUG: Bad page map in process procrank pte:8437526f pmd:785de067
addr:9108d000 vm_flags:00200073 anon_vma:f0d99020 mapping: (null) index:9108d
CPU: 1 PID: 4974 Comm: procrank Tainted: G B W O 3.10.1+ #1
Call Trace:
dump_stack+0x16/0x18
print_bad_pte+0x114/0x1b0
vm_normal_page+0x56/0x60
pagemap_pte_range+0x17a/0x1d0
walk_page_range+0x19e/0x2c0
pagemap_read+0x16e/0x200
vfs_read+0x84/0x150
SyS_read+0x4a/0x80
syscall_call+0x7/0xb
Signed-off-by: Liu ShuoX <shuox.liu@intel.com> Signed-off-by: Chen LinX <linx.z.chen@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> [3.10.x+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Russell King [Wed, 30 Oct 2013 14:16:16 +0000 (14:16 +0000)]
mm: list_lru: fix almost infinite loop causing effective livelock
I've seen a fair number of issues with kswapd and other processes
appearing to get stuck in v3.12-rc. Using sysrq-p many times seems to
indicate that it gets stuck somewhere in list_lru_walk_node(), called
from prune_icache_sb() and super_cache_scan().
I never seem to be able to trigger a calltrace for functions above that
point.
So I decided to add the following to super_cache_scan():
/*
* prune the dcache first as the icache is pinned by it, then
@@ -99,7 +103,7 @@ static unsigned long super_cache_scan(struct shrinker *shrink,
freed += sb->s_op->free_cached_objects(sb, fs_objects,
sc->nid);
}
-
+printk("%s:%u: %s: dentries %lu inodes %lu freed %lu\n", current->comm, current->pid, __func__, dentries, inodes, freed);
drop_super(sb);
return freed;
}
and shortly thereafter, having applied some pressure, I got this:
update-apt-xapi:1616: super_cache_scan: dentries 25632 inodes 2 total 25635
update-apt-xapi:1616: super_cache_scan: dentries 1023 inodes 0
------------[ cut here ]------------
Kernel BUG at c0101994 [verbose debug info unavailable]
Internal error: Oops - BUG: 0 [#3] SMP ARM
Modules linked in: fuse rfcomm bnep bluetooth hid_cypress
CPU: 0 PID: 1616 Comm: update-apt-xapi Tainted: G D 3.12.0-rc7+ #154
task: daea1200 ti: c3bf8000 task.ti: c3bf8000
PC is at super_cache_scan+0x1c0/0x278
LR is at trace_hardirqs_on+0x14/0x18
Process update-apt-xapi (pid: 1616, stack limit = 0xc3bf8240)
...
Backtrace:
(super_cache_scan) from [<c00cd69c>] (shrink_slab+0x254/0x4c8)
(shrink_slab) from [<c00d09a0>] (try_to_free_pages+0x3a0/0x5e0)
(try_to_free_pages) from [<c00c59cc>] (__alloc_pages_nodemask+0x5)
(__alloc_pages_nodemask) from [<c00e07c0>] (__pte_alloc+0x2c/0x13)
(__pte_alloc) from [<c00e3a70>] (handle_mm_fault+0x84c/0x914)
(handle_mm_fault) from [<c001a4cc>] (do_page_fault+0x1f0/0x3bc)
(do_page_fault) from [<c001a7b0>] (do_translation_fault+0xac/0xb8)
(do_translation_fault) from [<c000840c>] (do_DataAbort+0x38/0xa0)
(do_DataAbort) from [<c00133f8>] (__dabt_usr+0x38/0x40)
Notice that we had a very low number of inodes, which were reduced to
zero my mult_frac().
Now, prune_icache_sb() calls list_lru_walk_node() passing that number of
inodes (0) into that as the number of objects to scan:
long prune_icache_sb(struct super_block *sb, unsigned long nr_to_scan,
int nid)
{
LIST_HEAD(freeable);
long freed;
spin_lock(&nlru->lock);
restart:
list_for_each_safe(item, n, &nlru->list) {
enum lru_status ret;
/*
* decrement nr_to_walk first so that we don't livelock if we
* get stuck on large numbesr of LRU_RETRY items
*/
if (--(*nr_to_walk) == 0)
break;
So, if *nr_to_walk was zero when this function was entered, that means
we're wanting to operate on (~0UL)+1 objects - which might as well be
infinite.
Clearly this is not correct behaviour. If we think about the behaviour
of this function when *nr_to_walk is 1, then clearly it's wrong - we
decrement first and then test for zero - which results in us doing
nothing at all. A post-decrement would give the desired behaviour -
we'd try to walk one object and one object only if *nr_to_walk were one.
It also gives the correct behaviour for zero - we exit at this point.
Fixes: 5cedf721a7cd ("list_lru: fix broken LRU_RETRY behaviour") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org>
[ Modified to make sure we never underflow the count: this function gets
called in a loop, so the 0 -> ~0ul transition is dangerous - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 30 Oct 2013 19:29:06 +0000 (12:29 -0700)]
Merge tag 'tty-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial fixes from Greg KH:
"Here are 3 tiny fixes that are needed for 3.12-final for some serial
drivers.
One of them is a revert of a broken patch, and two others are fixes
for reported bugs. All of these have been in linux-next for a while,
I forgot I had not sent them to you yet, my fault"
(Actually, Greg, you _had_ sent two of the three, so this pulls in just
one actual new fix)
* tag 'tty-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty/serial: at91: fix uart/usart selection for older products
Linus Torvalds [Wed, 30 Oct 2013 19:27:12 +0000 (12:27 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Mainly Intel regression fixes and quirks, along with a simple one
liner to fix rendernodes ioctl access (off by default, but testers
want to test it)"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: allow DRM_IOCTL_VERSION on render-nodes
drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb
drm/i915: No LVDS hardware on Intel D410PT and D425KT
drm/i915/dp: workaround BIOS eDP bpp clamping issue
drm/i915: Add HSW CRT output readout support
drm/i915: Add support for pipe_bpp readout
Linus Torvalds [Wed, 30 Oct 2013 19:25:15 +0000 (12:25 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Fixes for the 3.12 debugfs problem - removing the duplicate directory
name, and using a better the error code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: use a more sensible error number when debugfs directory creation fails
KVM: Fix modprobe failure for kvm_intel/kvm_amd
Dan Carpenter [Tue, 29 Oct 2013 19:11:06 +0000 (22:11 +0300)]
aacraid: missing capable() check in compat ioctl
In commit d496f94d22d1 ('[SCSI] aacraid: fix security weakness') we
added a check on CAP_SYS_RAWIO to the ioctl. The compat ioctls need the
check as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Markos Chandras [Wed, 30 Oct 2013 14:27:48 +0000 (14:27 +0000)]
MIPS: malta: Fix GIC interrupt offsets
The GIC interrupt offsets are calculated based on the value of NR_CPUS.
However, this is wrong because NR_CPUS may or may not contain the real
number of the actual cpus present in the system. We fix that by using
the 'nr_cpu_ids' variable which contains the real number of cpus in
the system. Previously, an MT core (eg with 8 VPEs) will fail to boot if
NR_CPUS was > 8 with the following errors:
Mika Westerberg [Wed, 30 Oct 2013 12:40:36 +0000 (14:40 +0200)]
Revert "ACPI / hotplug / PCI: Avoid doing too much for spurious notifies"
Commit 2dc4128 (ACPI / hotplug / PCI: Avoid doing too much for
spurious notifies) changed the enable_slot() to check return value of
pci_scan_slot() and if it is zero return early from the function. It
means that there were no new devices in this particular slot.
However, if a device appeared deeper in the hierarchy the code now
ignores it causing things like Thunderbolt chaining fail to recognize
new devices.
The problem with Alex Williamson's machine was solved with commit a47d8c8 (ACPI / hotplug / PCI: Avoid parent bus rescans on spurious
device checks) and hence we should be able to restore the original
functionality that we always rescan on bus check notification.
On a device check notification we still check what acpiphp_rescan_slot()
returns and on zero bail out early.
Fixes: 2dc41281b1d1 (ACPI / hotplug / PCI: Avoid doing too much for spurious notifies) Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 9745cdb36da8 (select: use freezable blocking call)
that triggers problems during resume from suspend to RAM on Paul Bolle's
32-bit x86 machines. Paul says:
Ever since I tried running (release candidates of) v3.11 on the two
working i686s I still have lying around I ran into issues on resuming
from suspend. Reverting 9745cdb36da8 (select: use freezable blocking
call) resolves those issues.
Resuming from suspend on i686 on (release candidates of) v3.11 and
later triggers issues like:
traps: systemd[1] general protection ip:b738e490 sp:bf882fc0 error:0 in libc-2.16.so[b731c000+1b0000]
and
traps: rtkit-daemon[552] general protection ip:804d6e5 sp:b6cb32f0 error:0 in rtkit-daemon[8048000+d000]
Once I hit the systemd error I can only get out of the mess that the
system is at that point by power cycling it.
Since we are reverting another freezer-related change causing similar
problems to happen, this one should be reverted as well.
References: https://lkml.org/lkml/2013/10/29/583 Reported-by: Paul Bolle <pebolle@tiscali.nl> Fixes: 9745cdb36da8 (select: use freezable blocking call) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
This reverts commit 1c441e921201 (epoll: use freezable blocking call)
which is reported to cause user space memory corruption to happen
after suspend to RAM.
Since it appears to be extremely difficult to root cause this
problem, it is best to revert the offending commit and try to address
the original issue in a better way later.
References: https://bugzilla.kernel.org/show_bug.cgi?id=61781 Reported-by: Natrio <natrio@list.ru> Reported-by: Jeff Pohlmeyer <yetanothergeek@gmail.com> Bisected-by: Leo Wolf <jclw@ymail.com> Fixes: 1c441e921201 (epoll: use freezable blocking call) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Paolo Bonzini [Wed, 30 Oct 2013 11:12:13 +0000 (12:12 +0100)]
KVM: use a more sensible error number when debugfs directory creation fails
I don't know if this was due to cut and paste, or somebody was really
using a D20 to pick the error code for kvm_init_debugfs as suggested by
Linus (EFAULT is 14, so the possibility cannot be entirely ruled out).
In any case, this patch fixes it.
Reported-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Herrmann [Mon, 28 Oct 2013 09:55:49 +0000 (10:55 +0100)]
drm: allow DRM_IOCTL_VERSION on render-nodes
DRM_IOCTL_VERSION is a reliable way to get the driver-name and version
information. It's not related to the interface-version (SET_VERSION ioctl)
so we can safely enable it on render-nodes.
Note that gbm uses udev-BUSID to load the correct mesa driver. However,
the VERSION ioctl should be the more reliable way to do this (in case we
add new DRM-bus drivers which have no BUSID or similar).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 30 Oct 2013 02:30:12 +0000 (12:30 +1000)]
Merge tag 'drm-intel-fixes-2013-10-29' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Regression and warn fixes for i915.
* tag 'drm-intel-fixes-2013-10-29' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb
drm/i915: No LVDS hardware on Intel D410PT and D425KT
drm/i915/dp: workaround BIOS eDP bpp clamping issue
drm/i915: Add HSW CRT output readout support
drm/i915: Add support for pipe_bpp readout
Deng-Cheng Zhu [Tue, 8 Oct 2013 15:17:48 +0000 (16:17 +0100)]
MIPS: Perf: Fix 74K cache map
According to Software User's Manual, the event of last-level-cache
read/write misses is mapped to even counters. Odd counters of that
event number count miss cycles.
Linus Torvalds [Tue, 29 Oct 2013 17:21:34 +0000 (10:21 -0700)]
Fix a few incorrectly checked [io_]remap_pfn_range() calls
Nico Golde reports a few straggling uses of [io_]remap_pfn_range() that
really should use the vm_iomap_memory() helper. This trivially converts
two of them to the helper, and comments about why the third one really
needs to continue to use remap_pfn_range(), and adds the missing size
check.