Cody P Schafer [Fri, 10 Aug 2012 22:22:54 +0000 (15:22 -0700)]
perf symbols: only set vmlinux longname & mark loaded if really loaded
dso__load_vmlinux() uses the filename passed to it to directly set the
dso long_name, which resulted in a use after free due to
dso__load_vmlinux_path() treating 0 symbols as a load failure and
subsequently freeing the contents of dso->long_name.
Change dso__load_vmlinux() so that finding 0 symbols does not cause it
to consider itself loaded, and do not set long_name in such a case.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-9-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cody P Schafer [Fri, 10 Aug 2012 22:22:53 +0000 (15:22 -0700)]
perf symbols: Simplify out_fixup in kernel syms loading
The only site that jumps to out_fixup has (kallsyms_filename == NULL).
And all paths that reach 'if (err > 0)' without 'goto out_fixup' have
kallsyms_filename != NULL.
So skip over both the check & dso__set_long_name(), and remove the
check.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-8-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cody P Schafer [Fri, 10 Aug 2012 22:22:48 +0000 (15:22 -0700)]
perf symbols: Remove unused 'end' arg in kallsyms parse cb
kallsyms__parse() takes a callback that is called on every discovered
symbol. As /proc/kallsyms does not supply symbol sizes, the callback was
simply called with end=start, faking the symbol size to 1.
All of the callbacks (there are 2) used in calls to kallsyms__parse()
are _only_ used as callbacks for kallsyms__parse().
Given that kallsyms__parse() lacks real information about what
end/length should be, don't make up a length in kallsyms__parse().
Instead have the callbacks handle guessing the length.
Also relocate a comment regarding symbol creation to the callback which
does symbol creation (kallsyms__parse() is not in general used to create
symbols).
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-3-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In kallsyms_parse() when calling process_symbol() (a callback argument
to kallsyms_parse()), we pass start as both start & end (ie:
start=start, end=start).
In map__process_kallsym_symbol(), the length is calculated as 'end -
start + 1', making the length 1, not 0.
Essentially, start & end define an inclusive range.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-2-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 7 Aug 2012 13:20:47 +0000 (15:20 +0200)]
perf tools: Support for DWARF mode callchain
This patch enables perf to use the DWARF unwind code.
It extends the perf record '-g' option with following arguments:
'fp' - provides framepointer based user
stack backtrace
'dwarf[,size]' - provides DWARF (libunwind) based user stack
backtrace. The size specifies the size of the
user stack dump. If omitted it is 8192 by default.
If libunwind is found during the perf build, then the 'dwarf' argument
becomes available for record command. The 'fp' stays as default option
in any case.
Examples: (perf compiled with libunwind)
perf record -g dwarf ls
- provides dwarf unwind with 8192 as stack dump size
perf record -g dwarf,4096 ls
- provides dwarf unwind with 4096 as stack dump size
perf record -g -- ls
perf record -g fp ls
- provides frame pointer unwind
Signed-off-by: Jiri Olsa <jolsa@redhat.com> Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-13-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 7 Aug 2012 13:20:46 +0000 (15:20 +0200)]
perf tools: Support for DWARF CFI unwinding on post processing
This brings the support for DWARF cfi unwinding on perf post
processing. Call frame informations are retrieved and then passed
to libunwind that requests memory and register content from the
applications.
Adding unwind object to handle the user stack backtrace based
on the user register values and user stack dump.
The unwind object access the libunwind via remote interface
and provides to it all the necessary data to unwind the stack.
The unwind interface provides following function:
unwind__get_entries
And callback (specified in above function) to retrieve
the backtrace entries:
typedef int (*unwind_entry_cb_t)(struct unwind_entry *entry,
void *arg);
Signed-off-by: Jiri Olsa <jolsa@redhat.com> Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-12-git-send-email-jolsa@redhat.com
[ Replaced use of perf_session by usage of perf_evsel ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 7 Aug 2012 13:20:43 +0000 (15:20 +0200)]
perf tools: Add interface to arch registers sets
Adding header files to access unified API for arch registers.
util/perf_regs.h - global perf_reg declarations
arch/x86/include/perf_regs.h - x86 arch specific
Adding perf_reg_name function to obtain register name based on the reg
ID value, and PERF_REGS_MASK macro with mask definition of all current
arch registers (will be used in unwind patches).
Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-9-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing following bits to the the perf_event_attr struct:
- exclude_callchain_kernel to filter out kernel callchain
from the sample dump
- exclude_callchain_user to filter out user callchain
from the sample dump
We need to be able to disable standard user callchain dump when we use
the dwarf cfi callchain mode, because frame pointer based user
callchains are useless in this mode.
Implementing also exclude_callchain_kernel to have complete set of
options.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ Added kernel callchains filtering ] Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-7-git-send-email-jolsa@redhat.com Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 7 Aug 2012 13:20:40 +0000 (15:20 +0200)]
perf: Add ability to attach user stack dump to sample
Introducing PERF_SAMPLE_STACK_USER sample type bit to trigger the dump
of the user level stack on sample. The size of the dump is specified by
sample_stack_user value.
Being able to dump parts of the user stack, starting from the stack
pointer, will be useful to make a post mortem dwarf CFI based stack
unwinding.
Added HAVE_PERF_USER_STACK_DUMP config option to determine if the
architecture provides user stack dump on perf event samples. This needs
access to the user stack pointer which is not unified across
architectures. Enabling this for x86 architecture.
Signed-off-by: Jiri Olsa <jolsa@redhat.com> Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-6-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf: Factor __output_copy to be usable with specific copy function
Adding a generic way to use __output_copy function with specific copy
function via DEFINE_PERF_OUTPUT_COPY macro.
Using this to add new __output_copy_user function, that provides output
copy from user pointers. For x86 the copy_from_user_nmi function is used
and __copy_from_user_inatomic for the rest of the architectures.
This new function will be used in user stack dump on sample, coming in
next patches.
Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-4-git-send-email-jolsa@redhat.com Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 7 Aug 2012 13:20:37 +0000 (15:20 +0200)]
perf: Add ability to attach user level registers dump to sample
Introducing PERF_SAMPLE_REGS_USER sample type bit to trigger the dump of
user level registers on sample. Registers we want to dump are specified
by sample_regs_user bitmask.
Only user level registers are dumped at the moment. Meaning the register
values of the user space context as it was before the user entered the
kernel for whatever reason (syscall, irq, exception, or a PMI happening
in userspace).
The layout of the sample_regs_user bitmap is described in
asm/perf_regs.h for archs that support register dump.
This is going to be useful to bring Dwarf CFI based stack unwinding on
top of samples.
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
[ Dump registers ABI specification. ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Suggested-by: Stephane Eranian <eranian@google.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 7 Aug 2012 13:20:36 +0000 (15:20 +0200)]
perf: Unified API to record selective sets of arch registers
This brings a new API to help the selective dump of registers on event
sampling, and its implementation for x86 arch.
Added HAVE_PERF_REGS config option to determine if the architecture
provides perf registers ABI.
The information about desired registers will be passed in u64 mask.
It's up to the architecture to map the registers into the mask bits.
For the x86 arch implementation, both 32 and 64 bit registers bits are
defined within single enum to ensure 64 bit system can provide register
dump for compat task if needed in the future.
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
[ Added missing linux/errno.h include ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 6 Aug 2012 04:41:22 +0000 (13:41 +0900)]
perf symbols: Implement poor man's ELF parser
Implement a minimal elf parser for getting build-id. It assumes that
required elf.h header is provided by libc header on the system and the
parser only looks for PT_NOTE program header to check build-id.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344228082-15569-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 6 Aug 2012 04:41:21 +0000 (13:41 +0900)]
perf symbols: Support minimal build without libelf
Now we have isolated all ELF-specific stuff, it's possible to build
without libelf. The output binary can do most of jobs but lacks (user
level) symbol information - kernel symbols are still accessable thanks
to the kallsyms.
To build perf without libelf (elfutils), give NO_LIBELF=1 to make.
For now, only 'perf probe' command is removed since it depends on
libelf/libdw heavily.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344228082-15569-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 6 Aug 2012 04:41:20 +0000 (13:41 +0900)]
perf symbols: Split out util/symbol-elf.c
Factor out the dependency of ELF handling into separate symbol-elf.c
file. It is a preparation of building a minimalistic version perf tools
which doesn't depend on the elfutils.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344228082-15569-3-git-send-email-namhyung@kernel.org
[ committer note: removed blank line at symbol-elf.c EOF ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 9 Aug 2012 14:31:53 +0000 (16:31 +0200)]
perf tools: Fix /etc config related installation
Fix missing /etc/bash_completion.d directory creation, otherwise
the installation fails miserably on systems that don't have bash
completion installed yet or on specific target:
$ make DESTDIR=/tmp/junk-perf O=/tmp/pbuild -C tools/perf/ install
...
install -m 755 bash_completion /tmp/junk-perf/etc/bash_completion.d/perf
install: cannot create regular file
`/tmp/junk-perf/etc/bash_completion.d/perf': No such file or directory
make: *** [install] Error 1
make: Leaving directory `/opt/sw/ahern/perf.git/tools/perf'
Also use sysconfdir variable instead of the hardcoded /etc to handle
overriden conf directory.
Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1344522713-27951-4-git-send-email-fweisbec@gmail.com Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Thu, 9 Aug 2012 16:35:37 +0000 (10:35 -0600)]
perf lock record: improve message when tracepoints are not enabled
If CONFIG options required for perf-lock are not enabled then the
corresponding tracepoints will not be enabled. Currently, the message to
the user is:
$ perf lock record -a -- sleep 1
invalid or unsupported event: 'lock:lock_acquire'
Run 'perf list' for a list of valid events
Improve the message with a suggestion on which CONFIG options are needed:
$ perf lock record -a -- sleep 1
tracepoint lock:lock_acquire is not enabled. Are CONFIG_LOCKDEP and CONFIG_LOCK_STAT enabled?
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1344530137-25521-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Thu, 9 Aug 2012 05:46:13 +0000 (13:46 +0800)]
perf script python: Correct handler check and spelling errors
Correct the checking for handler returned by PyDict_GetItemString(),
also fix some spelling error and remove some data code in
event_analyzing_sample.py, as suggested by Namhyung Kim.
v2: restore back the wrongly removed trace_unhandled() func
Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20120809134613.067104c4@feng-i7 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Wed, 8 Aug 2012 09:57:55 +0000 (17:57 +0800)]
perf scripts python: Add event_analyzing_sample.py as a sample for general event handling
Currently only trace point events are supported in perf/python script,
the first 3 patches of this serie add the support for all types of
events. This script is just a simple sample to show how to gather the
basic information of the events and analyze them.
This script will create one object for each event sample and insert them
into a table in a database, then leverage the simple SQL commands to
sort/group them. User can modify or write their brand new functions
according to their specific requirment.
Here is the sample of how to use the script:
$ perf record -a tree
$ perf script -s process_event.py
There is 100 records in gen_events table
Statistics about the general events grouped by thread/symbol/dso:
comm number histgram
==========================================
swapper 56 ######
tree 20 #####
perf 10 ####
sshd 8 ####
kworker/7:2 4 ###
ksoftirqd/7 1 #
plugin-containe 1 #
Feng Tang [Wed, 8 Aug 2012 09:57:54 +0000 (17:57 +0800)]
perf scripts python: Add a python library EventClass.py
This library defines several class types for perf events which could
help to better analyze the event samples. Currently there are just a few
classes, PerfEvent is the base class for all perf events, PebsEvent is
a HW base Intel x86 PEBS event, and user could add more SW/HW event
classes based on requriements.
Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1344419875-21665-5-git-send-email-feng.tang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Wed, 8 Aug 2012 09:57:53 +0000 (17:57 +0800)]
perf scripts python: Pass event/thread/dso name and symbol info to event handler in python
Also as suggested by Arnaldo, pack all these parameters to a dictionary,
which is more expandable for adding new parameters while keeping the
compatibility for old scripts.
Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1344419875-21665-4-git-send-email-feng.tang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Wed, 8 Aug 2012 09:57:52 +0000 (17:57 +0800)]
perf script: Replace "struct thread" with "struct addr_location" as a parameter for "process_event()"
Both perl and python script start processing events other than trace
points, and it's useful to pass the resolved symbol and the dso info to
the event handler in script for better analysis and statistics.
Struct thread is already a member of struct addr_location, using
addr_location will keep the thread info, while providing additional
symbol and dso info if exist, so that the script itself doesn't need to
bother to do the symbol resolving and dso searching work.
Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1344419875-21665-3-git-send-email-feng.tang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Wed, 8 Aug 2012 09:57:51 +0000 (17:57 +0800)]
perf script: Add general python handler to process non-tracepoint events
This patch just follows Robert Richter's idea and the commit 37a058ea0
"perf script: Add generic perl handler to process events"
to similarly add a python handler for general events other than tracepoints.
For non-tracepoint events, this patch will try to find a function named
"process_event" in the python script, and pass the event attribute,
perf_sample, raw_data in format of raw string. And the python script can
use "struct" module's unpack function to disasemble the needed info and process.
Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1344419875-21665-2-git-send-email-feng.tang@intel.com
[ committer note: Fixed up wrt da37896, i.e. pevent parm in script event handlers ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Robert Richter [Tue, 7 Aug 2012 17:43:12 +0000 (19:43 +0200)]
perf tools: Fix lib/traceevent build dir with OUTPUT variable set
With the OUTPUT variable set the libtraceevent.a file is wrongly built
in the source directory:
+ make -d OUTPUT=/.../.build/perf-user/ DESTDIR=/.../.install/perf-user/
...
Considering target file `../lib/traceevent//libtraceevent.a'.
File `../lib/traceevent//libtraceevent.a' does not exist.
Finished prerequisites of target file `../lib/traceevent//libtraceevent.a'.
Must remake target `../lib/traceevent//libtraceevent.a'.
Invoking recipe from Makefile:837 to update target `../lib/traceevent//libtraceevent.a'.
Putting child 0x703850 (../lib/traceevent//libtraceevent.a) PID 8365 on the chain.
Live child 0x703850 (../lib/traceevent//libtraceevent.a) PID 8365
SUBDIR ../lib/traceevent/
$ git clean -nxd
Would remove tools/lib/traceevent/.event-parse.d
Would remove tools/lib/traceevent/.parse-filter.d
Would remove tools/lib/traceevent/.parse-utils.d
Would remove tools/lib/traceevent/.trace-seq.d
Would remove tools/lib/traceevent/event-parse.o
Would remove tools/lib/traceevent/libtraceevent.a
Would remove tools/lib/traceevent/parse-filter.o
Would remove tools/lib/traceevent/parse-utils.o
Would remove tools/lib/traceevent/trace-seq.o
This patch fixes this.
Note: Though this should already work with O=$outputdir we better use
the OUTPUT variable directly.
Robert Richter [Tue, 7 Aug 2012 17:43:11 +0000 (19:43 +0200)]
perf tools: Fix version file for perf documentation with OUTPUT variable set
Fixes the following:
+ make OUTPUT=/.../.build/perf-user/ DESTDIR=/.../.install/perf-user/ man install-man
make -C Documentation man
make[1]: Entering directory `/.../.source/linux.perf/tools/perf/Documentation'
make[2]: Entering directory `/.../.source/linux.perf/tools/perf'
make[2]: *** No rule to make target `PERF-VERSION-FILE'. Stop.
We already lookup the associated event_format when reading the perf.data
header, so that we can cache the tracepoint name in evsel->name, so do
it a little further and save the event_format itself, so that we can
avoid relookups in tools that need to access it.
Change the tools to take the most obvious advantage, when they were
using pevent_find_event directly. More work is needed for further
removing the need of a pointer to pevent, such as when asking for event
field values ("common_pid" and the other common fields and per
event_format fields).
This is something that was planned but only got actually done when
Andrey Wagin needed to do this lookup at perf_tool->sample() time, when
we don't have access to pevent (session->pevent) to use with
pevent_find_event().
Cc: Andrey Wagin <avagin@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/n/tip-txkvew2ckko0b594ae8fbnyk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf header: Set the tracepoint names on PERF_RECORD_HEADER_TRACING_DATA
We only have access to pevent after processing that event, so set the
tracepoint names there.
Right now this isn't a problem as we're deferring resolving the
tracepoint names to when we process samples, but in the next patches we
will be doing it in advance, to avoid relookups, so do it earlier, as
soon as we process the tracing data event.
Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-tzb7srmsl7a6o3icw592iv2o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 4 Aug 2012 15:32:46 +0000 (08:32 -0700)]
Merge branch 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS fixes and cleanups from Al Viro.
Most of this is the series to remove sync_supers() and the
->write_supers VFS callback from Artem Bityutskiy. One commit to do the
actual removal work, a whole series of commits to fix up stale comments
etc all over the tree.
There's also a regression fix for an incorrect use of mnt_drop_write()
in do_dentry_open().
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
missed mnt_drop_write() in do_dentry_open()
UBIFS: nuke pdflush from comments
gfs2: nuke pdflush from comments
drbd: nuke pdflush from comments
nilfs2: nuke write_super from comments
hfs: nuke write_super from comments
vfs: nuke pdflush from comments
jbd/jbd2: nuke write_super from comments
btrfs: nuke pdflush from comments
btrfs: nuke write_super from comments
ext4: nuke pdflush from comments
ext4: nuke write_super from comments
ext3: nuke write_super from comments
Documentation: fix the VM knobs descritpion WRT pdflush
Documentation: get rid of write_super
vfs: kill write_super and sync_supers
The '->write_super' superblock method is gone, and this patch removes all the
references to 'write_super' from various jbd and jbd2.
Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The '->write_super' superblock method is gone, and this patch removes all the
references to 'write_super' from ext3.
Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The '->write_super' superblock method is gone, and this patch removes all the
references to 'write_super' from various pieces of the kernel documentation.
Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Finally we can kill the 'sync_supers' kernel thread along with the
'->write_super()' superblock operation because all the users are gone.
Now every file-system is supposed to self-manage own superblock and
its dirty state.
The nice thing about killing this thread is that it improves power management.
Indeed, 'sync_supers' is a source of monotonic system wake-ups - it woke up
every 5 seconds no matter what - even if there were no dirty superblocks and
even if there were no file-systems using this service (e.g., btrfs and
journalled ext4 do not need it). So it was wasting power most of the time. And
because the thread was in the core of the kernel, all systems had to have it.
So I am quite happy to make it go away.
Interestingly, this thread is a left-over from the pdflush kernel thread which
was a self-forking kernel thread responsible for all the write-back in old
Linux kernels. It was turned into per-block device BDI threads, and
'sync_supers' was a left-over. Thus, R.I.P, pdflush as well.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Fri, 3 Aug 2012 21:10:00 +0000 (14:10 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI and power management fixes from Len Brown:
"A 3.3 sleep regression fixed, numa bugfix, plus some minor cleanups"
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
ACPI processor: Fix tick_broadcast_mask online/offline regression
ACPI: Only count valid srat memory structures
ACPI: Untangle a return statement for better readability
ACPI / PCI: Do not try to acquire _OSC control if that is hopeless
ACPI: delete _GTS/_BFS support
ACPI/x86: revert 'x86, acpi: Call acpi_enter_sleep_state via an asmlinkage C function from assembler'
ACPI: replace strlen("string") with sizeof("string") -1
ACPI / PM: Fix build warning in sleep.c for CONFIG_ACPI_SLEEP unset
Linus Torvalds [Fri, 3 Aug 2012 20:24:07 +0000 (13:24 -0700)]
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
Pull exofs update from Boaz Harrosh:
"They are all mostly fixes, except the most important patch by Artem
Bityutskiy which removes the use of s_dirt. After this patch s_dirt
can be completely removed from the tree."
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
ore: Fix out-of-bounds access in _ios_obj()
exofs: Use proper max_IO calculations from ore
exofs: Fix __r4w_get_page when offset is beyond i_size
exofs: stop using s_dirt
exofs: readpage_strip: Add a BUG_ON to check for PageLocked(page)
Linus Torvalds [Fri, 3 Aug 2012 18:21:29 +0000 (11:21 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM bug fixes from Marcelo Tosatti:
- Fix DS/ES segment register corruption on x86_32.
- Fix kvmclock wallclock migration offset.
- Fix PIT interrupt ACK vs system reset logic bug.
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Fix ds/es corruption on i386 with preemption
KVM: x86: apply kvmclock offset to guest wall clock time
KVM: PIC: call ack notifiers for irqs that are dropped form irr
Linus Torvalds [Fri, 3 Aug 2012 18:20:19 +0000 (11:20 -0700)]
Merge tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes for ASoC, mainly against regressions due to the
defaulting regmap i/o, in addition to a HD-audio fixup."
* tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: core: Fix check before defaulting to regmap
ALSA: hda - Support dock on Lenovo Thinkpad T530 with ALC269VC
ASoC: wm8962: Allow VMID time to fully ramp
ASoC: AC97 doesn't use regmap by default
ASoC: sgtl5000: enable VAG_POWER for LINE_IN
ASoC: ab8500: Inform SoC Core that we have our own I/O arrangements
ASoC: omap: Add missing modules aliases to get sound working on omap devices
sound: tegra_alc5632: Adjust to of_get_named_gpio() change
sound: tegra_wm8903: Adjust to of_get_named_gpio() change
ASoC: mc13783: Provide codec->control_data
ASoC: ux500: Include the correct header files
ASoC: wm8994: Hold runtime PM reference while handling mic and jack IRQs
ASoC: sgtl5000: remove unneeded snd_soc_dapm_new_widgets in probe
ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work
ASoC: mxs-saif: fix clock prepare and enable unbalance issue
ASoC: wm8994: Ensure there are enough BCLKs for four channels
Linus Torvalds [Fri, 3 Aug 2012 18:00:26 +0000 (11:00 -0700)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fixes from Ingo Molnar:
"A couple of futex fixes from Darren Hart: two bugs reported by Dave
Jones (found with his trinity test) and Dan Carpenter through static
analysis. The third found while debugging the first two."
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Forbid uaddr == uaddr2 in futex_wait_requeue_pi()
futex: Fix bug in WARN_ON for NULL q.pi_state
futex: Test for pi_mutex on fault in futex_wait_requeue_pi()
Linus Torvalds [Fri, 3 Aug 2012 17:59:36 +0000 (10:59 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Various fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-64, kcmp: The kcmp system call can be common
arch/x86/kernel/kdebugfs.c: Ensure a consistent return value in error case
x86/mce: Add quirk for instruction recovery on Sandy Bridge processors
x86/mce: Move MCACOD defines from mce-severity.c to <asm/mce.h>
x86/ioapic: Fix NULL pointer dereference on CPU hotplug after disabling irqs
x86, nops: Missing break resulting in incorrect selection on Intel
x86: CONFIG_CC_STACKPROTECTOR=y is no longer experimental
Linus Torvalds [Fri, 3 Aug 2012 17:58:57 +0000 (10:58 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"One regression fix, and a couple of cleanups that clean up the code
flow in areas that had high-profile bugs recently."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Remove all direct references to timekeeper
time: Clean up offs_real/wall_to_mono and offs_boot/total_sleep_time updates
time: Clean up stray newlines
time/jiffies: Rename ACTHZ to SHIFTED_HZ
time/jiffies: Allow CLOCK_TICK_RATE to be undefined
time: Fix casting issue in tk_set_xtime and tk_xtime_add
Linus Torvalds [Fri, 3 Aug 2012 17:58:13 +0000 (10:58 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fixes and two late cleanups"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cleanups: Add load balance cpumask pointer to 'struct lb_env'
sched: Fix comment about PREEMPT_ACTIVE bit location
sched: Fix minor code style issues
sched: Use task_rq_unlock() in __sched_setscheduler()
sched/numa: Add SD_PERFER_SIBLING to CPU domain
Linus Torvalds [Fri, 3 Aug 2012 17:57:20 +0000 (10:57 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Fix merge window fallout and fix sleep profiling (this was always
broken, so it's not a fix for the merge window - we can skip this one
from the head of the tree)."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/trace: Add ability to set a target task for events
perf/x86: Fix USER/KERNEL tagging of samples properly
perf/x86/intel/uncore: Make UNCORE_PMU_HRTIMER_INTERVAL 64-bit
Linus Torvalds [Fri, 3 Aug 2012 17:53:47 +0000 (10:53 -0700)]
Merge tag 'for_linux-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb
Pull KGDB/KDB/usb-dbgp fixes and cleanups from Jason Wessel:
"There are no new features, those will be delayed to the 3.7 window.
There are only fixes/cleanup against the usual kernel churn and we are
removing more lines than we add:
- usb-dbgp - increase the controller wait time to come out of halt.
- kdb - Remove unused KDB_FLAG_ONLY_DO_DUMP code and cpu in more prompt
- debug core - pass NMI type on archs that provide NMI types"
* tag 'for_linux-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
USB: echi-dbgp: increase the controller wait time to come out of halt.
kernel/debug: Make use of KGDB_REASON_NMI
kdb: Remove cpu from the more prompt
kdb: Remove unused KDB_FLAG_ONLY_DO_DUMP
Linus Torvalds [Fri, 3 Aug 2012 17:52:41 +0000 (10:52 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
m68k/apollo: Rename "timer" to "apollo_timer"
zorro: Remove unused zorro_bus.devices
m68k: Remove never used asm/shm.h
m68k/sun3: Remove unselectable code in prom_init()
m68k: Use asm-generic version of <asm/sections.h>
m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
mtd/uclinux: Use generic __bss_stop instead of _ebss
m68knommu: Allow ColdFire CPUs to use unaligned accesses
m68k: Remove five unused headers
m68k: CPU32 does not support unaligned accesses
m68k: Introduce config option CPU_HAS_NO_UNALIGNED
m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64
m68k: Move CPU_HAS_* config options
m68k: Remove duplicate FPU config option
m68knommu: Clean up printing of sections
m68k: Use asm-generic version of <asm/types.h>
m68k: Use Kbuild logic to import asm-generic headers
perf tools: Remove brace expansion from clean target
The clean target uses brace expansion to remove some generated files. However,
the default shells on many systems do not support this feature resulting in
some generated files not being removed by clean.
Signed-off-by: Palmer Cox <p@lmercox.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1343598883-17907-1-git-send-email-p@lmercox.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Tue, 31 Jul 2012 04:31:33 +0000 (22:31 -0600)]
perf tools: Change strlist to use the new rblist
Replaces the direct use of rbtree code with the rblist API. In the end
the patch is a no-op on strlist functionality; the API for strlist is
not changed, only its implementaton.
Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1343709095-7089-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 30 Jul 2012 02:54:35 +0000 (20:54 -0600)]
perf kvm: Use strtol for walking guestmount directory
Only want to process directories under the guestmnount directory that
have a pid as a name (ie, all digits). Other entries in the guestmount
directory should be ignored. There is already a check that requires the
first character of each entry to be a digit, but atoi is used to convert
the directory name to a pid. For example if guestmount contains a
directory with the name 1foo, atoi converts it to a pid of 1 and a
machine is created with a pid of 1. This is wrong; this directory really
should be ignored. Use strtol to do that.
Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1343616875-6455-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 30 Jul 2012 02:53:51 +0000 (20:53 -0600)]
perf tool: Save cmdline from user in file header vs what is passed to record
A number of builtin commands process some user args and then pass the rest to
cmd_record. cmd_record then saves argc/argv that it receives into the header of
the perf data file. But this loses the arguments handled by the first command
-- ie., the real command line from the user. This patch saves the command line
as typed by the user rather than what was passed to cmd_record.
As an example consider the command:
$ perf kvm --guest --host --guestmount=/tmp/guest-mount record
-fo /tmp/perf.data -ag -- sleep 10
Currently the command saved to the header is:
cmdline : /tmp/p3.5/perf record -o perf.data.kvm -fo /tmp/perf.data -ag -- sleep 1
(ignore the duplicated -o -- the first would be yet another bug with perf-kvm).
With this patch the command line saved to the header is:
cmdline : /tmp/p3.5/perf kvm --guest --host --guestmount=/tmp/guest-mount
record -fo /tmp/perf.data -ag -- sleep 1
v2: simplified to saving the command in parse_options per Stephane's suggestion
Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1343616831-6408-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 30 Jul 2012 02:53:03 +0000 (20:53 -0600)]
perf top: Error handling for counter creation should parallel perf-record
5a7ed29 fixed up perf-record but not perf-top. Similar argument holds
for it -- fallback to PMU only if it does not exist and handle invalid
attributes separately.
Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Link: http://lkml.kernel.org/r/1343616783-6360-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In commit 99b725084 "ACPI processor hotplug: Delay acpi_processor_start()
call for hotplugged cores", acpi_processor_hotplug(pr) was wrongly replaced
by acpi_processor_cst_has_changed() inside the acpi_cpu_soft_notify(). This
patch will restore it back, fixing the tick_broadcast_mask regression:
https://lkml.org/lkml/2012/7/30/169
Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: <stable@vger.kernel.org> # 3.3+ Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com>
On this machine (ProLiant ML570 G3) the SRAT table contains:
- No processor affinities
- One memory affinity structure (which is set disabled)
CC: Per Jessen <per@opensuse.org> CC: Andi Kleen <andi@firstfloor.org> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Thu, 2 Aug 2012 18:52:39 +0000 (11:52 -0700)]
Merge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc
Pull OLPC platform updates from Andres Salomon:
"These move the OLPC Embedded Controller driver out of
arch/x86/platform and into drivers/platform/olpc.
OLPC machines are now ARM-based (which means lots of x86 and ARM
changes), but are typically pretty self-contained.. so it makes more
sense to go through a separate OLPC tree after getting the appropriate
review/ACKs."
* 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc:
x86: OLPC: move s/r-related EC cmds to EC driver
Platform: OLPC: move global variables into priv struct
Platform: OLPC: move debugfs support from x86 EC driver
x86: OLPC: switch over to using new EC driver on x86
Platform: OLPC: add a suspended flag to the EC driver
Platform: OLPC: turn EC driver into a platform_driver
Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it
drivers: OLPC: update various drivers to include olpc-ec.h
Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
Linus Torvalds [Thu, 2 Aug 2012 18:50:24 +0000 (11:50 -0700)]
Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson:
"This contains a set of device-tree conversions for Marvell Orion
platforms that were staged early but took a few tries to get the
branch into a format where it was suitable for us to pick up.
Given that most people working on these platforms are hobbyists with
limited time, we were a bit more flexible with merging it even though
it came in late."
* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
ARM: Kirkwood: Replace mrvl with marvell
ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
ARM: Kirkwood: Describe Dreamplug LEDs in DT.
ARM: Kirkwood: Describe iConnects LEDs in DT.
ARM: Kirkwood: Describe iConnects temperature sensor in DT.
ARM: Kirkwood: Describe IB62x0 LEDs in DT.
ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
ARM: Kirkwood: Use DT to configure SATA device.
ARM: kirkwood: use devicetree for SPI on dreamplug
ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
ARM: Kirkwood: Add basic device tree support for QNAP TS219.
ATA: sata_mv: Add device tree support
ARM: Orion: DTify the watchdog timer.
ARM: Orion: Add arch support needed for I2C via DT.
ARM: kirkwood: use devicetree for orion-spi
...
Linus Torvalds [Thu, 2 Aug 2012 18:48:54 +0000 (11:48 -0700)]
Merge tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc cpuidle enablement for OMAP from Olof Johansson:
"Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree,
but didn't go in because the pull request ended up rejected. So it
just got merged, and we got this staged branch that enables the
coupled cpuidle code on OMAP.
With a stable git workflow from the other maintainer we could have
staged this earlier, but that wasn't the case so we have had to merge
it late.
The alternative is to hold it off until 3.7 but given that the code is
well-isolated to OMAP and they are eager to see it go in, I didn't
push back hard in that direction."
* tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP4: CPUidle: Open broadcast clock-event device.
ARM: OMAP4: CPUidle: add synchronization for coupled idle states
ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle.
ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus
Linus Torvalds [Thu, 2 Aug 2012 18:48:20 +0000 (11:48 -0700)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A few fixes for merge window fallout, and a bugfix for timer resume on
PRIMA2."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: mmp: add missing irqs.h
arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs
ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes
ARM: mxc: Include missing irqs.h header
Linus Torvalds [Thu, 2 Aug 2012 18:45:42 +0000 (11:45 -0700)]
Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh
Pull SuperH fixes from Paul Mundt.
* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits)
sh: explicitly include sh_dma.h in setup-sh7722.c
sh: ecovec: care CN5 VBUS if USB host mode
sh: sh7724: fixup renesas_usbhs clock settings
sh: intc: initial irqdomain support.
sh: pfc: Fix up init ordering mess.
serial: sh-sci: fix compilation breakage, when DMA is enabled
dmaengine: shdma: restore partial transfer calculation
sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757
sh: Fix up recursive fault in oops with unset TTB.
sh: pfc: Build fix for pinctrl_remove_gpio_range() changes.
sh: select the fixed regulator driver on several boards
sh: ecovec: switch MMC power control to regulators
sh: add fixed voltage regulators to se7724
sh: add fixed voltage regulators to sdk7786
sh: add fixed voltage regulators to rsk
sh: add fixed voltage regulators to migor
sh: add fixed voltage regulators to kfr2r09
sh: add fixed voltage regulators to ap325rxa
sh: add fixed voltage regulators to sh7757lcr
sh: add fixed voltage regulators to sh2007
...
Linus Torvalds [Thu, 2 Aug 2012 18:34:40 +0000 (11:34 -0700)]
Merge tag 'md-3.6' of git://neil.brown.name/md
Pull additional md update from NeilBrown:
"This contains a few patches that depend on plugging changes in the
block layer so needed to wait for those.
It also contains a Kconfig fix for the new RAID10 support in dm-raid."
* tag 'md-3.6' of git://neil.brown.name/md:
md/dm-raid: DM_RAID should select MD_RAID10
md/raid1: submit IO from originating thread instead of md thread.
raid5: raid5d handle stripe in batch way
raid5: make_request use batch stripe release
Linus Torvalds [Thu, 2 Aug 2012 17:57:31 +0000 (10:57 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull two ceph fixes from Sage Weil:
"The first patch fixes up the old crufty open intent code to use the
atomic_open stuff properly, and the second fixes a possible null deref
and memory leak with the crypto keys."