Lai Jiangshan [Tue, 2 Feb 2010 07:32:09 +0000 (15:32 +0800)]
tracing: Fix circular dead lock in stack trace
When we cat <debugfs>/tracing/stack_trace, we may cause circular lock:
sys_read()
t_start()
arch_spin_lock(&max_stack_lock);
t_show()
seq_printf(), vsnprintf() .... /* they are all trace-able,
when they are traced, max_stack_lock may be required again. */
The following script can trigger this circular dead lock very easy:
#!/bin/bash
echo 1 > /proc/sys/kernel/stack_tracer_enabled
mount -t debugfs xxx /mnt > /dev/null 2>&1
(
# make check_stack() zealous to require max_stack_lock
for ((; ;))
{
echo 1 > /mnt/tracing/stack_max_size
}
) &
for ((; ;))
{
cat /mnt/tracing/stack_trace > /dev/null
}
To fix this bug, we increase the percpu trace_active before
require the lock.
Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B67D4F9.9080905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds [Mon, 1 Feb 2010 18:57:12 +0000 (10:57 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ASoC: AM3517: ASoC driver not getting compiled
ASoC: AIC23: Fixing writes to non-existing registers in resume function
ALSA: hda - Add an ASUS mobo to MSI blacklist
Linus Torvalds [Mon, 1 Feb 2010 18:46:49 +0000 (10:46 -0800)]
Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure.
drm/radeon/kms: move radeon KMS on/off switch out of staging.
drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3
drm/vmwgfx: Don't send bad flags to the host
drm/vmwgfx: Request SVGA version 2 and bail if not found
drm/vmwgfx: Correctly detect 3D
drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c
drm/kms: Remove incorrect comment in struct drm_mode_modeinfo
drm/ttm: remove padding from ttm_ref_object on 64bit builds
drm/radeon/kms: release agp on error.
drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info
drm/kms/radeon/agp: Fix warning, format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’
drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching.
drm/kms/radeon: pick digitial encoders smarter. (v3)
drm/radeon/kms: use active device to pick connector for encoder
drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking.
Linus Torvalds [Mon, 1 Feb 2010 18:45:00 +0000 (10:45 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, hw_breakpoint, kgdb: Do not take mutex for kernel debugger
x86, hw_breakpoints, kgdb: Fix kgdb to use hw_breakpoint API
hw_breakpoints: Release the bp slot if arch_validate_hwbkpt_settings() fails.
perf: Ignore perf.data.old
perf report: Fix segmentation fault when running with '-g none'
Linus Torvalds [Mon, 1 Feb 2010 18:44:36 +0000 (10:44 -0800)]
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Correct printk whitespace in warning from cpu down task check
sched: Fix incorrect sanity check
sched: Fix fork vs hotplug vs cpuset namespaces
Linus Torvalds [Mon, 1 Feb 2010 18:43:01 +0000 (10:43 -0800)]
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing/documentation: Cover new frame pointer semantics
tracing/documentation: Fix a typo in ftrace.txt
ring-buffer: Check for end of page in iterator
ring-buffer: Check if ring buffer iterator has stale data
tracing: Prevent kernel oops with corrupted buffer
Linus Torvalds [Mon, 1 Feb 2010 18:42:35 +0000 (10:42 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/agp: Fix agp_amd64_init regression
x86: Add quirk for Intel DG45FC board to avoid low memory corruption
x86: Add Dell OptiPlex 760 reboot quirk
x86, UV: Fix RTC latency bug by reading replicated cachelines
oprofile/x86: add Xeon 7500 series support
oprofile/x86: fix crash when profiling more than 28 events
lib/dma-debug.c: mark file-local struct symbol static.
x86/amd-iommu: Fix deassignment of a device from the pt_domain
x86/amd-iommu: Fix IOMMU-API initialization for iommu=pt
x86/amd-iommu: Fix NULL pointer dereference in __detach_device()
x86/amd-iommu: Fix possible integer overflow
Mark Brown [Mon, 4 Jan 2010 15:30:54 +0000 (15:30 +0000)]
regulator: Specify REGULATOR_CHANGE_STATUS for WM835x LED constraints
The WM8350 LED driver needs to be able to enable and disable the
regulators it is using. Previously the core wasn't properly enforcing
status change constraints so the driver was able to function but this
has always been intended to be required.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Michel Dänzer [Fri, 22 Jan 2010 08:20:00 +0000 (09:20 +0100)]
drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure.
If radeon_cs_parser_init() fails, radeon_cs_ioctl() calls
radeon_cs_parser_fini() with the non-zero error value. The latter dereferenced
parser->ib which hasn't been initialized yet -> boom. Add a test for parser->ib
being non-NULL before dereferencing it.
Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 1 Feb 2010 01:35:47 +0000 (11:35 +1000)]
drm/radeon/kms: move radeon KMS on/off switch out of staging.
We are happy enough that the KMS driver is stable enough for enough people
for the kms enable/disable to leave staging. Distros can now contemplate
turning this on.
Jerome Glisse [Fri, 22 Jan 2010 14:19:00 +0000 (15:19 +0100)]
drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3
If an error happen in r600_blit_prepare_copy report it rather
than WARNING and keeping execution. For instance if ib allocation
failed we did just warn about but then latter tried to access
NULL ib ptr causing oops. This patch also protect r600_copy_blit
with a mutex as otherwise one process might overwrite blit temporary
data with new one possibly leading to GPU lockup.
Should partialy or totaly fix:
https://bugzilla.redhat.com/show_bug.cgi?id=553279
V2 failing blit initialization is not fatal, fallback to memcpy when
this happen
V3 init blit before startup as we pin in startup, remove duplicate
code (this one was actualy tested unlike V2)
Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Peter Hanzel [Sat, 30 Jan 2010 03:38:07 +0000 (03:38 +0000)]
drm/vmwgfx: Request SVGA version 2 and bail if not found
This fixes the driver not loading on older versions of VMware.
Signed-off-by: Peter Hanzel <hanzelpeter@gmail.com> Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Richard Kennedy [Tue, 26 Jan 2010 17:10:48 +0000 (17:10 +0000)]
drm/ttm: remove padding from ttm_ref_object on 64bit builds
Re-order structure ttm_ref_object to remove 8 bytes of alignment padding
on 64 bit builds, so shrinking its size from 72 to 64 bytes allowing it
to fit into a smaller slab.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
John Kacur [Sun, 31 Jan 2010 19:38:03 +0000 (20:38 +0100)]
drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info
First call drm_agp_acquire to check if agp has been acquired.
Second call drm_agp_info to fill in the info data struct, including aper_size.
Finally do the check to see if the aper_size makes sense.
Signed-off-by: John Kacur <jkacur@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
booting a Lenovo W500 with LVDS + DP outputs showed up a TODO we had
on our list, to pick a correct digital encoder block. The LVTMA
encoder requires the second digital encoder, all others can use any
encoder at all.
This fixes the digital encoder selection logic to enable LVDS/DP combos
to work okay.
V2: fix silly addition of connector dig_block and cleanup the other
places in the code that pick the encoder.
V3: rename to dig_encoder and clean up further - also fix
the picking algorithm.
Jason Wessel [Thu, 28 Jan 2010 23:04:43 +0000 (17:04 -0600)]
perf, hw_breakpoint, kgdb: Do not take mutex for kernel debugger
This patch fixes the regression in functionality where the
kernel debugger and the perf API do not nicely share hw
breakpoint reservations.
The kernel debugger cannot use any mutex_lock() calls because it
can start the kernel running from an invalid context.
A mutex free version of the reservation API needed to get
created for the kernel debugger to safely update hw breakpoint
reservations.
The possibility for a breakpoint reservation to be concurrently
processed at the time that kgdb interrupts the system is
improbable. Should this corner case occur the end user is
warned, and the kernel debugger will prohibit updating the
hardware breakpoint reservations.
Any time the kernel debugger reserves a hardware breakpoint it
will be a system wide reservation.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: kgdb-bugreport@lists.sourceforge.net Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: torvalds@linux-foundation.org
LKML-Reference: <1264719883-7285-3-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jason Wessel [Thu, 28 Jan 2010 23:04:42 +0000 (17:04 -0600)]
x86, hw_breakpoints, kgdb: Fix kgdb to use hw_breakpoint API
In the 2.6.33 kernel, the hw_breakpoint API is now used for the
performance event counters. The hw_breakpoint_handler() now
consumes the hw breakpoints that were previously set by kgdb
arch specific code. In order for kgdb to work in conjunction
with this core API change, kgdb must use some of the low level
functions of the hw_breakpoint API to install, uninstall, and
deal with hw breakpoint reservations.
The kgdb core required a change to call kgdb_disable_hw_debug
anytime a slave cpu enters kgdb_wait() in order to keep all the
hw breakpoints in sync as well as to prevent hitting a hw
breakpoint while kgdb is active.
During the architecture specific initialization of kgdb, it will
pre-allocate 4 disabled (struct perf event **) structures. Kgdb
will use these to manage the capabilities for the 4 hw
breakpoint registers, per cpu. Right now the hw_breakpoint API
does not have a way to ask how many breakpoints are available,
on each CPU so it is possible that the install of a breakpoint
might fail when kgdb restores the system to the run state. The
intent of this patch is to first get the basic functionality of
hw breakpoints working and leave it to the person debugging the
kernel to understand what hw breakpoints are in use and what
restrictions have been imposed as a result. Breakpoint
constraints will be dealt with in a future patch.
While atomic, the x86 specific kgdb code will call
arch_uninstall_hw_breakpoint() and arch_install_hw_breakpoint()
to manage the cpu specific hw breakpoints.
The net result of these changes allow kgdb to use the same pool
of hw_breakpoints that are used by the perf event API, but
neither knows about future reservations for the available hw
breakpoint slots.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: kgdb-bugreport@lists.sourceforge.net Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: torvalds@linux-foundation.org
LKML-Reference: <1264719883-7285-2-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
David Härdeman [Thu, 28 Jan 2010 20:02:54 +0000 (21:02 +0100)]
x86: Add quirk for Intel DG45FC board to avoid low memory corruption
Commit 6aa542a694dc9ea4344a8a590d2628c33d1b9431 added a quirk for the
Intel DG45ID board due to low memory corruption. The Intel DG45FC
shares the same BIOS (and the same bug) as noted in:
http://bugzilla.kernel.org/show_bug.cgi?id=13736
Signed-off-by: David Härdeman <david@hardeman.nu>
LKML-Reference: <20100128200254.GA9134@hardeman.nu> Cc: <stable@kernel.org> Cc: Alexey Fisher <bug-track@fisher-privat.net> Cc: ykzhao <yakui.zhao@intel.com> Cc: Tony Bones <aabonesml@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Hugh Dickins [Fri, 29 Jan 2010 17:46:34 +0000 (17:46 +0000)]
mm: fix migratetype bug which slowed swapping
After memory pressure has forced it to dip into the reserves, 2.6.32's 5f8dcc21211a3d4e3a7a5ca366b469fb88117f61 "page-allocator: split per-cpu
list into one-list-per-migrate-type" has been returning MIGRATE_RESERVE
pages to the MIGRATE_MOVABLE free_list: in some sense depleting reserves.
Fix that in the most straightforward way (which, considering the overheads
of alternative approaches, is Mel's preference): the right migratetype is
already in page_private(page), but free_pcppages_bulk() wasn't using it.
How did this bug show up? As a 20% slowdown in my tmpfs loop kbuild
swapping tests, on PowerMac G5 with SLUB allocator. Bisecting to that
commit was easy, but explaining the magnitude of the slowdown not easy.
The same effect appears, but much less markedly, with SLAB, and even
less markedly on other machines (the PowerMac divides into fewer zones
than x86, I think that may be a factor). We guess that lumpy reclaim
of short-lived high-order pages is implicated in some way, and probably
this bug has been tickling a poor decision somewhere in page reclaim.
But instrumentation hasn't told me much, I've run out of time and
imagination to determine exactly what's going on, and shouldn't hold up
the fix any longer: it's valid, and might even fix other misbehaviours.
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: check total number of devices when removing missing
Btrfs: check return value of open_bdev_exclusive properly
Btrfs: do not mark the chunk as readonly if in degraded mode
Btrfs: run orphan cleanup on default fs root
Btrfs: fix a memory leak in btrfs_init_acl
Btrfs: Use correct values when updating inode i_size on fallocate
Btrfs: remove tree_search() in extent_map.c
Btrfs: Add mount -o compress-force
H. Peter Anvin [Fri, 29 Jan 2010 06:14:43 +0000 (22:14 -0800)]
x86: get rid of the insane TIF_ABI_PENDING bit
Now that the previous commit made it possible to do the personality
setting at the point of no return, we do just that for ELF binaries.
And suddenly all the reasons for that insane TIF_ABI_PENDING bit go
away, and we can just make SET_PERSONALITY() just do the obvious thing
for a 32-bit compat process.
Everything becomes much more straightforward this way.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 29 Jan 2010 06:14:42 +0000 (22:14 -0800)]
Split 'flush_old_exec' into two functions
'flush_old_exec()' is the point of no return when doing an execve(), and
it is pretty badly misnamed. It doesn't just flush the old executable
environment, it also starts up the new one.
Which is very inconvenient for things like setting up the new
personality, because we want the new personality to affect the starting
of the new environment, but at the same time we do _not_ want the new
personality to take effect if flushing the old one fails.
As a result, the x86-64 '32-bit' personality is actually done using this
insane "I'm going to change the ABI, but I haven't done it yet" bit
(TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the
personality, but just the "pending" bit, so that "flush_thread()" can do
the actual personality magic.
This patch in no way changes any of that insanity, but it does split the
'flush_old_exec()' function up into a preparatory part that can fail
(still called flush_old_exec()), and a new part that will actually set
up the new exec environment (setup_new_exec()). All callers are changed
to trivially comply with the new world order.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anuj Aggarwal [Fri, 29 Jan 2010 10:19:22 +0000 (15:49 +0530)]
ASoC: AM3517: ASoC driver not getting compiled
Commit 761c9d45 (ASoC: Fix build of OMAP sound drivers) changes
CONFIG_MACH_OMAP3517EVM -> CONFIG_SND_OMAP_SOC_OMAP3517EVM in the
Makefile. Whereas the config option defined in Kconfig is
SND_OMAP_SOC_AM3517EVM. Because of this, ASoC driver for AM3517
was not getting compiled.
Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Anuj Aggarwal [Fri, 29 Jan 2010 08:28:55 +0000 (13:58 +0530)]
ASoC: AIC23: Fixing writes to non-existing registers in resume function
Commit e9ff5eb2 (Fixing infinite loop in resume path) uses wrong AIC23
register in resume function because of which register writes happen
on some non-existing registers.
Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Henrik Rydberg [Fri, 29 Jan 2010 06:28:27 +0000 (22:28 -0800)]
Input: add the ABS_MT_PRESSURE event
For pressure-based multi-touch devices, a direct way to send sensor
intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE
event to the MT protocol.
Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
David Härdeman [Fri, 29 Jan 2010 06:28:27 +0000 (22:28 -0800)]
Input: winbond-cir - remove dmesg spam
I missed converting one dev_info call to deb_dbg before submitting the driver.
Without this change, a message will be printed to dmesg for each button press
if a RC6 remote is used.
Linus Torvalds [Fri, 29 Jan 2010 02:48:53 +0000 (18:48 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
Fix failure exit in ipathfs
fix oops in fs/9p late mount failure
fix leak in romfs_fill_super()
get rid of pointless checks after simple_pin_fs()
Fix failure exits in bfs_fill_super()
fix affs parse_options()
Fix remount races with symlink handling in affs
Fix a leak in affs_fill_super()
Linus Torvalds [Fri, 29 Jan 2010 00:33:12 +0000 (16:33 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
x86/PCI: remove IOH range fetching
PCI: fix nested spinlock hang in aer_inject
Linus Torvalds [Thu, 28 Jan 2010 22:34:11 +0000 (14:34 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] Update mach-types
[ARM] orion5x: D-link DNS-323 rev. B1 power-off
[ARM] Orion5x: add GPIO LED and buttons for wrt350n v2
[ARM] pxa: fix irq suspend/resume for pxa25x
[ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x
[ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus
[ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot
[ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two
Josef Bacik [Wed, 27 Jan 2010 02:09:38 +0000 (02:09 +0000)]
Btrfs: check total number of devices when removing missing
If you have a disk failure in RAID1 and then add a new disk to the
array, and then try to remove the missing volume, it will fail. The
reason is the sanity check only looks at the total number of rw devices,
which is just 2 because we have 2 good disks and 1 bad one. Instead
check the total number of devices in the array to make sure we can
actually remove the device. Tested this with a failed disk setup and
with this test we can now run
btrfs-vol -r missing /mount/point
and it works fine.
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik [Wed, 27 Jan 2010 02:09:00 +0000 (02:09 +0000)]
Btrfs: check return value of open_bdev_exclusive properly
Hit this problem while testing RAID1 failure stuff. open_bdev_exclusive
returns ERR_PTR(), not NULL. So change the return value properly. This
is important if you accidently specify a device that doesn't exist when
trying to add a new device to an array, you will panic the box
dereferencing bdev.
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik [Wed, 27 Jan 2010 02:07:59 +0000 (02:07 +0000)]
Btrfs: do not mark the chunk as readonly if in degraded mode
If a RAID setup has chunks that span multiple disks, and one of those
disks has failed, btrfs_chunk_readonly will return 1 since one of the
disks in that chunk's stripes is dead and therefore not writeable. So
instead if we are in degraded mode, return 0 so we can go ahead and
allocate stuff. Without this patch all of the block groups in a RAID1
setup will end up read-only, which will mean we can't add new disks to
the array since we won't be able to make allocations.
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Since it introduces this problem where we can run orphan cleanup on a
volume that can have orphan entries re-added. Instead of my original
fix, Yan Zheng pointed out that we can just revert my original fix and
then run the orphan cleanup in open_ctree after we look up the fs_root.
I have tested this with all the tests that gave me problems and this
patch fixes both problems. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 28 Jan 2010 21:18:15 +0000 (16:18 -0500)]
Btrfs: Add mount -o compress-force
The default btrfs mount -o compress mode will quickly back off
compressing a file if it notices that compression does not reduce the
size of the data being written. This can save considerable CPU because
all future writes to the file go through uncompressed.
But some files are both very large and have mixed data stored in
them. In that case, we want to add the ability to always try
compressing data before writing it.
This commit adds mount -o compress-force. A later commit will add
a new inode flag that does the same thing.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Linus Torvalds [Thu, 28 Jan 2010 20:59:43 +0000 (12:59 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs
MIPS: PowerTV: Streamline access to platform device registers
MIPS: Fix vmlinuz build for 32bit-only math shells
MIPS: Add support of LZO-compressed kernels
hw_breakpoints: Release the bp slot if arch_validate_hwbkpt_settings() fails.
On a given architecture, when hardware breakpoint registration fails
due to un-supported access type (read/write/execute), we lose the bp
slot since register_perf_hw_breakpoint() does not release the bp slot
on failure.
Hence, any subsequent hardware breakpoint registration starts failing
with 'no space left on device' error.
This patch introduces error handling in register_perf_hw_breakpoint()
function and releases bp slot on error.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Maneesh Soni <maneesh@in.ibm.com>
LKML-Reference: <20100121125516.GA32521@in.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Vmalloc is called to allocate journal->j_cnode_free_list but
we hold the reiserfs lock at this time, which raises a
{RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} lock inversion.
Just drop the reiserfs lock at this time, as it's not even
needed but kept for paranoid reasons.
This fixes:
[ INFO: inconsistent lock state ]
2.6.33-rc5 #1
---------------------------------
inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
kswapd0/313 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&REISERFS_SB(s)->lock){+.+.?.}, at: [<c11118c8>]
reiserfs_write_lock_once+0x28/0x50
{RECLAIM_FS-ON-W} state was registered at:
[<c104ee32>] mark_held_locks+0x62/0x90
[<c104eefa>] lockdep_trace_alloc+0x9a/0xc0
[<c108f7b6>] kmem_cache_alloc+0x26/0xf0
[<c108621c>] __get_vm_area_node+0x6c/0xf0
[<c108690e>] __vmalloc_node+0x7e/0xa0
[<c1086aab>] vmalloc+0x2b/0x30
[<c110e1fb>] journal_init+0x6cb/0xa10
[<c10f90a2>] reiserfs_fill_super+0x342/0xb80
[<c1095665>] get_sb_bdev+0x145/0x180
[<c10f68e1>] get_super_block+0x21/0x30
[<c1094520>] vfs_kern_mount+0x40/0xd0
[<c1094609>] do_kern_mount+0x39/0xd0
[<c10aaa97>] do_mount+0x2c7/0x6d0
[<c10aaf06>] sys_mount+0x66/0xa0
[<c16198a7>] mount_block_root+0xc4/0x245
[<c1619a81>] mount_root+0x59/0x5f
[<c1619b98>] prepare_namespace+0x111/0x14b
[<c1619269>] kernel_init+0xcf/0xdb
[<c100303a>] kernel_thread_helper+0x6/0x1c
irq event stamp: 63236801
hardirqs last enabled at (63236801): [<c134e7fa>]
__mutex_unlock_slowpath+0x9a/0x120
hardirqs last disabled at (63236800): [<c134e799>]
__mutex_unlock_slowpath+0x39/0x120
softirqs last enabled at (63218800): [<c102f451>] __do_softirq+0xc1/0x110
softirqs last disabled at (63218789): [<c102f4ed>] do_softirq+0x4d/0x60
other info that might help us debug this:
2 locks held by kswapd0/313:
#0: (shrinker_rwsem){++++..}, at: [<c1074bb4>] shrink_slab+0x24/0x170
#1: (&type->s_umount_key#19){++++..}, at: [<c10a2edd>]
shrink_dcache_memory+0xfd/0x1a0
Frans Pop [Mon, 25 Jan 2010 13:56:34 +0000 (14:56 +0100)]
sched: Correct printk whitespace in warning from cpu down task check
Due to an incorrect line break the output currently contains tabs.
Also remove trailing space.
The actual output that logcheck sent me looked like this:
Task events/1 (pid = 10) is on cpu 1^I^I^I^I(state = 1, flags = 84208040)
After this patch it becomes:
Task events/1 (pid = 10) is on cpu 1 (state = 1, flags = 84208040)
Signed-off-by: Frans Pop <elendilplanet.nl> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <201001251456.34996.elendil@planet.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
David VomLehn [Tue, 22 Dec 2009 01:49:22 +0000 (17:49 -0800)]
MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs
The MIPS processor is limited to 64 external interrupt sources. Using a
greater number without IRQ sharing requires reading platform-specific
registers. On such platforms, reading the IntCtl register to determine
which interrupt corresponds to a timer interrupt will not work.
On MIPSR2 systems there is a solution - the TI bit in the Cause register,
specifically indicates that a timer interrupt has occured. This patch uses
that bit to detect interrupts for MIPSR2 processors, which may be expected
to work regardless of how the timer interrupt may be routed in the hardware.
Signed-off-by: David VomLehn (dvomlehn@cisco.com)
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David VomLehn [Thu, 24 Dec 2009 01:34:46 +0000 (17:34 -0800)]
MIPS: PowerTV: Streamline access to platform device registers
Pre-compute addresses for the basic ASIC registers. This speeds up access
and allows memory for unused configurations to be freed. In addition,
uninitialized register addresses will be returned as NULL to catch bad
usage quickly.
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/806/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: Fix vmlinuz build for 32bit-only math shells
POSIX requires $((<expression>)) arithmetic in sh only to have long
arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but
the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit.
I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is
0xffffffff94100000, and for an example 4MiB kernel
VMLINUZ_LOAD_ADDRESS is made out to be:
----
alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' ffffffff94500000
alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' 80000000003fffff
----
The former is obviously correct whilst the later breaks things royally.
Fortunately working with only the lower 32bit's works for both bash and
dash:
----
$ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000
$ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000
----
So, we can split the original 64bit string to two parts, and only
calculate the low 32bit part, which is big enough (1GiB kernel sizes
anyone?) for a normal Linux kernel image file, now, we calculate the
VMLINUZ_LOAD_ADDRESS like this:
1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix
2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE
This patch fixes vmlinuz kernel builds on systems where only a
32bit-only math shell is available.
Patch Changelog:
Version 2
- simplified method by using 'expr' for 'substr' and making it work
with dash once again
Version 1
- Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error
of "make clean"
- Consider more cases of the VMLINUX_LOAD_ADDRESS
Version 0
- initial release
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree
[SCSI] zfcp: Set hardware timeout as requested by BSG request.
[SCSI] zfcp: Introduce bsg_timeout callback.
[SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout
[SCSI] zfcp: add missing compat ptr conversion
[SCSI] zfcp: Fix linebreak in hba trace
[SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request
[SCSI] qla2xxx: Update version number to 8.03.01-k10.
[SCSI] fc-transport: Use packed modifier for fc_bsg_request structure.
[SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment.
[SCSI] qla2xxx: Correct FCP2 recovery handling.
[SCSI] scsi_lib: Fix bug in completion of bidi commands
[SCSI] mptsas: Fix issue with chain pools allocation on katmai
[SCSI] aacraid: fix File System going into read-only mode
[SCSI] lpfc: fix file permissions
Linus Torvalds [Wed, 27 Jan 2010 17:27:44 +0000 (09:27 -0800)]
Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] fix single stepped svcs with TRACE_IRQFLAGS=y
[S390] zcrypt: Do not remove coprocessor for error 8/72
[S390] sclp_vt220: set initial terminal window size
[S390] use set_current_state in sigsuspend
[S390] irqflags: add missing types.h include
[S390] dasd: fix possible NULL pointer errors
Chris Wilson [Wed, 27 Jan 2010 13:36:32 +0000 (13:36 +0000)]
drm/i915: Selectively enable self-reclaim
Having missed the ENOMEM return via i915_gem_fault(), there are probably
other paths that I also missed. By not enabling NORETRY by default these
paths can run the shrinker and take memory from the system (but not from
our own inactive lists because our shrinker can not run whilst we hold
the struct mutex) and this may allow the system to survive a little longer
whilst our drivers consume all available memory.
References:
OOM killer unexpectedly called with kernel 2.6.32
http://bugzilla.kernel.org/show_bug.cgi?id=14933
v2: Pass gfp into page mapping.
v3: Use new read_cache_page_gfp() instead of open-coding.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stefan Richter [Tue, 26 Jan 2010 20:39:07 +0000 (21:39 +0100)]
firewire: ohci: fix crashes with TSB43AB23 on 64bit systems
Unsurprisingly, Texas Instruments TSB43AB23 exhibits the same behaviour
as TSB43AB22/A in dual buffer IR DMA mode: If descriptors are located
at physical addresses above the 31 bit address range (2 GB), the
controller will overwrite random memory. With luck, this merely
prevents video reception. With only a little less luck, the machine
crashes.
We use the same workaround here as with TSB43AB22/A: Switch off the
dual buffer capability flag and use packet-per-buffer IR DMA instead.
Another possible workaround would be to limit the coherent DMA mask to
31 bits.
In Linux 2.6.33, this change serves effectively only as documentation
since dual buffer mode is not used for any controller anymore. But
somebody might want to re-enable it in the future to make use of
features of dual buffer DMA that are not available in packet-per-buffer
mode.
In Linux 2.6.32 and older, this update is vital for anyone with this
controller, more than 2 GB RAM, a 64 bit kernel, and FireWire video or
audio applications.
We have at least four reports:
http://bugzilla.kernel.org/show_bug.cgi?id=13808
http://marc.info/?l=linux1394-user&m=126154279004083
https://bugzilla.redhat.com/show_bug.cgi?id=552142
http://marc.info/?l=linux1394-user&m=126432246128386
Reported-by: Paul Johnson Reported-by: Ronneil Camara Reported-by: G Zornetzer Reported-by: Mark Thompson Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Linus Torvalds [Wed, 27 Jan 2010 17:20:03 +0000 (09:20 -0800)]
mm: add new 'read_cache_page_gfp()' helper function
It's a simplified 'read_cache_page()' which takes a page allocation
flag, so that different paths can control how aggressive the memory
allocations are that populate a address space.
In particular, the intel GPU object mapping code wants to be able to do
a certain amount of own internal memory management by automatically
shrinking the address space when memory starts getting tight. This
allows it to dynamically use different memory allocation policies on a
per-allocation basis, rather than depend on the (static) address space
gfp policy.
The actual new function is a one-liner, but re-organizing the helper
functions to the point where you can do this with a single line of code
is what most of the patch is all about.
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 27 Jan 2010 10:49:10 +0000 (02:49 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID drivers.
x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG)
Revert "x86: ucode-amd: Load ucode-patches once ..."
x86: Disable HPET MSI on ATI SB700/SB800
x86: Set hotpluggable nodes in nodes_possible_map
Dimitri Sivanich [Fri, 22 Jan 2010 15:41:40 +0000 (09:41 -0600)]
x86, UV: Fix RTC latency bug by reading replicated cachelines
For SGI UV node controllers (HUB) rev 2.0 or greater, use
replicated cachelines to read the RTC timer. This optimization
allows faster simulataneous reads from a given socket.
[S390] fix single stepped svcs with TRACE_IRQFLAGS=y
If irq flags tracing is enabled the TRACE_IRQS_ON macros expands to
a function call which clobbers registers %r0-%r5. The macro is used
in the code path for single stepped system calls. The argument
registers %r2-%r6 need to be restored from the stack before the system
call function is called.
Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Felix Beck [Wed, 27 Jan 2010 09:12:39 +0000 (10:12 +0100)]
[S390] zcrypt: Do not remove coprocessor for error 8/72
In a case where the number of the input data is bigger than the
modulus of the key, the coprocessor adapters will report an 8/72
error. This case is not caught yet, thus the adapter will be taken
offline. To prevent this, we return an -EINVAL instead.
Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[S390] sclp_vt220: set initial terminal window size
When opening a SCLP VT220 terminal, the terminal window size is not
initialized (defaults to zero).
Since the SCLP VT220 terminal supports only 80x24, explicitly set
the window size to prevent (n)curses applications from guessing
the default setting.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>