Markus Elfring [Fri, 21 Nov 2014 18:32:02 +0000 (19:32 +0100)]
ALSA: sb: Deletion of unnecessary checks before two function calls
The functions release_and_free_resource() and snd_util_memhdr_free() test
whether their argument is NULL and then return immediately.
Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 19 Nov 2014 11:16:14 +0000 (12:16 +0100)]
ALSA: hda/realtek - Clean up mute/mic GPIO LED handling
There are a few duplicated codes handling the mute and mic-mute LEDs
via GPIO pins. Let's consolidate to single helpers. Here we
introduced two new fields to alc_spec, gpio_mute_led_mask and
gpio_mic_led_mask, to contain the bit mask to set/clear. Also,
mute_led_polarity is evaluated as well.
Takashi Sakamoto [Tue, 18 Nov 2014 14:59:40 +0000 (23:59 +0900)]
ALSA: firewire-lib: fix kerneldoc errors
Complete missing parameters, correct wrong reference, and add an explaination
about the differences between the latest specification and our implementation.
Markus Elfring [Mon, 17 Nov 2014 09:44:33 +0000 (10:44 +0100)]
ALSA: hda: Deletion of unnecessary checks before two function calls
The functions kfree() and release_firmware() test whether their argument
is NULL and then return immediately. Thus the test around the call
is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sudip Mukherjee [Fri, 14 Nov 2014 12:42:21 +0000 (18:12 +0530)]
ALSA: ice1712: consider error value
earlier we were ignoring the return value of snd_ak4114_create and
always returning 0.
now we are returning the actual status. revo_init is calling this
function, and revo_init is checking the return value.
Sudip Mukherjee [Fri, 14 Nov 2014 10:39:05 +0000 (16:09 +0530)]
ALSA: ice1712: remove unneeded return statement
the functions:
snd_ice1712_akm4xxx_build_controls
snd_ice1712_build_pro_mixer
snd_ctl_add
snd_ak4114_build
prodigy192_ak4114_init
snd_ak4113_build
are all returning either 0 or a negetive error value.
so we can easily remove the check for a negative value and return
the value instead.
Chris J Arges [Wed, 12 Nov 2014 18:07:02 +0000 (12:07 -0600)]
ALSA: usb-audio: Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20
This code contains the Scarlett mixer interface code that was originally
written by Tobias Hoffman and Robin Gareus. Because the device doesn't
properly implement UAC2 this code adds a mixer quirk for the device.
Changes from the original code include removing the metering code along with
dead code and comments. Compiler warnings were fixed. The code to initialize
the sampling rate was causing a crash this was fixed as discussed on the
mailing list. Error, and info messages were convered to dev_err and dev_info
interfaces. The custom scarlett_mixer_elem_info struct was replaced with the
more generic usb_mixer_elem_info to be able to recycle more code from mixer.c.
This patch also makes additional modifications based on upstream comments.
Individual control creation functions are removed and a generic
function is no used. Macros for function calls are removed to improve
readability. Hardcoded control initialization is removed. Save to HW
functionality has been removed. Strings for enums are created dynamically for
the mixer. Strings used for controls are now SNDRV_CTL_ELEM_ID_NAME_MAXLEN
length.
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris J Arges [Wed, 12 Nov 2014 18:07:01 +0000 (12:07 -0600)]
ALSA: usb-audio: make set_*_mix_values functions public
Make the functions set_cur_mix_value and get_cur_mix_value accessible by files
that include mixer.h. In addition make usb_mixer_elem_free accessible.
This allows reuse of these functions by mixers that may require quirks.
The following summarizes the renamed functions:
- set_cur_mix_value -> snd_usb_set_cur_mix_value
- get_cur_mix_value -> snd_usb_get_cur_mix_value
- usb_mixer_elem_free -> snd_usb_mixer_elem_free
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Damien Zammit [Tue, 11 Nov 2014 14:09:55 +0000 (01:09 +1100)]
ALSA: usb-audio: Add duplex mode for Digidesign Mbox 1 and enable mixer
This patch provides duplex support for the Digidesign Mbox 1 sound
card and has been a work in progress for about a year.
Users have confirmed on my website that previous versions of this patch
have worked on the hardware and I have been testing extensively.
It also enables the mixer control for providing clock source
selector based on the previous patch.
The sample rate has been hardcoded to 48kHz because it works better with
the S/PDIF sync mode when the sample rate is locked. This is the
highest rate that the device supports and no loss of functionality
is observed by restricting the sample rate apart from the inability to selec
a lower rate.
Damien Zammit [Tue, 11 Nov 2014 14:09:54 +0000 (01:09 +1100)]
ALSA: usb-audio: Add mixer control for Digidesign Mbox 1 clock source
This patch provides the infrastructure for the Digidesign Mbox 1
to have a mixer control for selecting the clock source.
Valid options are Internal and S/PDIF external sync.
A non-documented command is sent to the device to enable this feature
found by reverse engineering and bus snooping.
Takashi Iwai [Sun, 9 Nov 2014 17:21:23 +0000 (18:21 +0100)]
ALSA: usb-audio: Allow multiple entries for the same iface in composite quirk
Currently the composite quirk doesn't work when multiple entries are
assigned to the same interface because it marks the interface as
claimed then checks whether the interface has been already claimed for
the secondary entry. But, if you look at the code, you'll notice that
multiple entries are allowed if the entry is the current interface;
i.e. the current behavior is anyway inconsistent, and this is an
unintended shortcoming.
This patch fixes the problem by marking the relevant interfaces as
claimed after applying the all composite entries. This fix will be
needed for the upcoming enhancements for Digidesign Mbox 1 quirks.
Reviewed-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 7 Nov 2014 16:08:28 +0000 (17:08 +0100)]
ALSA: pcm: Add snd_pcm_stop_xrun() helper
Add a new helper function snd_pcm_stop_xrun() to the standard sequnce
lock/snd_pcm_stop(XRUN)/unlock by a single call, and replace the
existing open codes with this helper.
The function checks the PCM running state to prevent setting the wrong
state, too, for more safety.
Takashi Iwai [Thu, 6 Nov 2014 12:04:49 +0000 (13:04 +0100)]
ALSA: usb-audio: Trigger PCM XRUN at XRUN
The usb-audio driver detects XRUN at its complete callback, but the
actual code to trigger PCM XRUN is commented out because it caused
deadlock in the past. This patch revives the PCM trigger properly.
It resulted in more than just enabling snd_pcm_stop(), but it had to
deduce the PCM substream with proper NULL checks and holds the stream
lock around the call.
Takashi Iwai [Thu, 6 Nov 2014 11:15:25 +0000 (12:15 +0100)]
ALSA: pcm: Update the state properly before notification
Some state changes (e.g. snd_pcm_stop()) sets the runtime state after
calling snd_timer_notify(). This is basically racy, since the
notification may wakes up the user even before the state change.
Although the possibility is low, we should set the state before the
notifications.
This comes from the fact that usb-audio driver may receive the
disconnect callback multiple times, per each usb interface. When a
device has both audio and midi interfaces, it gets called twice, and
currently the driver tries to release resources at the last call.
At this point, the first parent interface has been already deleted,
thus deleting a child of the first parent hits such a warning.
For fixing this problem, we need to call snd_card_disconnect() and
cancel pending operations at the very first disconnect while the
release of the whole objects waits until the last disconnect call.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80931 Reported-and-tested-by: Tomas Gayoso <tgayoso@gmail.com> Reported-and-tested-by: Chris J Arges <chris.j.arges@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sudip Mukherjee [Wed, 5 Nov 2014 14:21:56 +0000 (19:51 +0530)]
ALSA: echoaudio: cleanup of unnecessary messages
commit "b5b4a41b392960010fccf1f9ccf8334d612bd450" was dereferencing
chip after it has been freed. This patch fixes that and at the same
time removes some debugging messages, which are unnecessary, as they
are just printing information about entry and exit from a function,
and which switch-case it is executing.
we can easily get from ftrace the information about the entry and exit
from a function.
Hui Wang [Wed, 5 Nov 2014 04:17:58 +0000 (12:17 +0800)]
ALSA: hda - fix mute led problem for three HP laptops
Without the fix, the mute led can't work on these three machines.
After apply this fix, these three machines will fall back on the led
control quirk as below, and through testing, the mute led works very
well.
PIN_QUIRK(0x10ec0282, 0x103c, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED,
ALC282_STANDARD_PINS,
{0x12, 0x90a60140},
...
BugLink: https://bugs.launchpad.net/bugs/1389497 Tested-by: TieFu Chen <tienfu.chen@canonical.com> Cc: Kailang Yang <kailang@realtek.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 31 Oct 2014 10:24:32 +0000 (11:24 +0100)]
ALSA: usb-audio: Pass direct struct pointer instead of list_head
Some functions in mixer.c and endpoint.c receive list_head instead of
the object itself. This is not obvious and rather error-prone. Let's
pass the proper object directly instead.
The functions in midi.c still receive list_head and this can't be
changed since the object definition isn't exposed to the outside of
midi.c, so left as is.
Takashi Iwai [Fri, 31 Oct 2014 10:00:23 +0000 (11:00 +0100)]
ALSA: usb-audio: Flatten probe and disconnect functions
The usb-audio probe and disconnect functions have been split just for
adapting the (new!) API at 2.5 kernel time. We left them until now,
partly because we wanted to build with the pretty old kernels in the
external alsa-driver tree. But the support of such old kernels has
been longly stopped, so it's good time to clean up this mess.
One good point by this cleanup is that now the probe function returns
a proper error code instead of only -EIO.
Takashi Iwai [Tue, 4 Nov 2014 13:02:40 +0000 (14:02 +0100)]
ALSA: pcm: Add xrun_injection proc entry
This patch adds a new proc entry for PCM substreams to inject an
XRUN. When a PCM substream is running and any value is written to its
xrun_injection proc file, the driver triggers XRUN. This is a useful
feature for debugging XRUN and error handling code paths.
Note that this entry is enabled only when CONFIG_SND_PCM_XRUN_DEBUG is
set.
Takashi Iwai [Tue, 4 Nov 2014 11:45:59 +0000 (12:45 +0100)]
ALSA: pcm: Replace PCM hwptr tracking with tracepoints
ALSA PCM core has a mechanism tracking the PCM hwptr updates for
analyzing XRUNs. But its log is limited (up to 10) and its log output
is a kernel message, which is hard to handle.
In this patch, the hwptr logging is moved to the tracing
infrastructure instead of its own. Not only the hwptr updates but
also XRUN and hwptr errors are recorded on the trace log, so that user
can see such events at the exact timing.
The new "snd_pcm" entry will appear in the tracing events:
# ls -F /sys/kernel/debug/tracing/events/snd_pcm
enable filter hw_ptr_error/ hwptr/ xrun/
The hwptr is for the regular hwptr update events. An event trace
looks like:
"POS" shows the hwptr update by the explicit position update call and
"IRQ" means the hwptr update by the interrupt,
i.e. snd_pcm_period_elapsed() call. The "pos" is the passed
ring-buffer offset by the caller, "old" is the previous hwptr, "base"
is the hwptr base position, "period" and "buf" are period- and
buffer-size of the target PCM substream.
(Note that the hwptr position displayed here isn't the ring-buffer
offset. It increments up to the PCM position boundary.)
The XRUN event appears similarly, but without "pos" field.
The hwptr error events appear with the PCM identifier and its reason
string, such as "Lost interrupt?".
The XRUN and hwptr error reports on kernel message are still left, can
be turned on/off via xrun_debug proc like before. But the bit 3, 4, 5
and 6 bits of xrun_debug proc are dropped by this patch. Also, along
with the change, the message strings have been reformatted to be a bit
more consistent.
Last but not least, the hwptr reporting is enabled only when
CONFIG_SND_PCM_XRUN_DEBUG is set.
Takashi Iwai [Tue, 4 Nov 2014 12:57:15 +0000 (13:57 +0100)]
ALSA: pcm: Correct PCM BUG error message
While converting to dev_*(), the message showing the invalid PCM
position was wrongly tagged as if an XRUN although it's actually a
BUG. This patch corrects the message again.
Ondrej Zary [Mon, 3 Nov 2014 20:35:48 +0000 (21:35 +0100)]
ALSA: es18xx: Add GPO controls
Add GPO0 and GPO1 (General Purpose Outputs) controls to mixer.
These can be used on some cards to control amplifier mute (seen in ES1868
datasheet) or additional onboard chips such as QX2130 QXpander processor.
These GPOs are present on ES1868, ES1869, ES1887 and ES1888 chips.
Tested on ES1868 with QX2130.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Markus Elfring [Mon, 3 Nov 2014 13:54:36 +0000 (14:54 +0100)]
ALSA: emu10k1: Deletion of unnecessary checks before three function calls
The functions kfree(), release_firmware() and snd_util_memhdr_free() test
whether their argument is NULL and then return immediately. Thus the test
around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sudip Mukherjee [Mon, 3 Nov 2014 10:34:12 +0000 (16:04 +0530)]
ALSA: echoaudio: add reference of struct echoaudio
added reference of struct echoaudio to free_firmware function.
this structure will be later used to get a reference of the card
when converting snd_printk to dev_* in the next patch of the series.
Takashi Iwai [Fri, 31 Oct 2014 13:45:04 +0000 (14:45 +0100)]
ALSA: pcm: Simplify snd_pcm_action_lock_irq()
The function snd_pcm_action_lock_irq() can be much simplified by
simply wrapping snd_pcm_action() with the stream lock. This was
rather the original idea, but later it was open coded for
optimization. However, looking at the optimization part closely, one
notices that the probability of the optimized path is quite low; in
normal situations, the linked stream action happens only for the
triggered substream, thus the operation becomes identical. So the
code simplification has a clear win, especially because we have now
doubly codes for both atomic and non-atomic locks.
Takashi Iwai [Thu, 30 Oct 2014 14:06:13 +0000 (15:06 +0100)]
ALSA: pcm: Convert params_*() with static inline functions
... and add proper kerneldoc comments.
There is no big reason to keep them as macros. Static inline
functions are safer in general, and suitable for kerneldoc, too.
Takashi Iwai [Thu, 30 Oct 2014 12:44:34 +0000 (13:44 +0100)]
ALSA: control: Add missing kerneldoc comments to exported functions
A few functions have no proper documentation yet, so let's add them.
Along with it, remove superfluous blank line between the closing brace
and EXPORT_SYMBOL() line.
Kailang Yang [Wed, 29 Oct 2014 08:10:13 +0000 (16:10 +0800)]
ALSA: hda/realtek - Update Initial AMP for EAPD control
The default EAPD control uses verb command to control EAPD. Some codec
does not have verb command for EAPD. It needs to control by hidden
register.
This update will avoid wrong behavior for some codec. This patch will
fix double setup for EAPD. It just needs to turn on by one site for
verb command or hidden register controlled.
Detailed changes:
- alc889_coef_init() is replaced with alc_update_coef_idx() with a
correct COEF value.
- for ALC262, ALC887 and ALC900, the EAPD setup via the hidden
register is removed because this rather conflicts with the EAPD verb
setup.
- For ALC888-VC, also the hidden register access is removed in
alc888_coef_init().
- Remove the dead #if 0 code for ALC267/ALC268.
Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tina Ruchandani [Wed, 29 Oct 2014 17:48:10 +0000 (10:48 -0700)]
ALSA: es1968: Replace timeval with ktime_t
es1968_measure_clock uses struct timeval, which on 32-bit systems will overflow
in 2038, leading to incorrect interpretation of time.This patch changes the
function to use ktime_t instead of struct timeval, which implies:
- no y2038: ktime_t uses a 64-bit datatype explicitly.
- efficent subtraction: The earlier version computes the difference in usecs
while dealing with secs and nsecs. It requires checks to see if the nsecs of
stop is less than start. This patch uses a direct subtract of ktime_t and
converts to usecs.
- use of monotonic clock (ktime_get) over real time (do_gettimeofday),
which simplifies timekeeping, as it does not have to deal with cases
where stop_time is less than start_time.
Takashi Iwai [Wed, 29 Oct 2014 15:13:05 +0000 (16:13 +0100)]
ALSA: hda - Add workaround for CMI8888 snoop behavior
CMI8888 shows the stuttering playback when the snooping is disabled
on the audio buffer. Meanwhile, we've got reports that CORB/RIRB
doesn't work in the snooped mode. So, as a compromise, disable the
snoop only for CORB/RIRB and enable the snoop for the stream buffers.
The resultant patch became a bit ugly, unfortunately, but we still can
live with it.
Aya Mahfouz [Tue, 28 Oct 2014 12:27:44 +0000 (14:27 +0200)]
ALSA: pcxhr: convert timeval to ktime_t
This patch is concerned with migrating the time variables in the pcxhr
module found in the sound driver. The changes are concerend with the
y2038 problem where timeval will overflow in the year 2038. ktime_t
was used instead of timeval to get the wall time. The difference
is displayed now in nanoseconds instead of microseconds.
Takashi Iwai [Tue, 28 Oct 2014 11:42:19 +0000 (12:42 +0100)]
ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat mode
In compat mode, we copy each field of snd_pcm_status struct but don't
touch the reserved fields, and this leaves uninitialized values
there. Meanwhile the native ioctl does zero-clear the whole
structure, so we should follow the same rule in compat mode, too.
Takashi Iwai [Mon, 27 Oct 2014 14:15:44 +0000 (15:15 +0100)]
ALSA: hda - Pass printf argument directly to request_module()
request_module() handles the printf style arguments, so we don't have
to render strings in the caller side. Not only it reduces the
unnecessary temporary string buffer, it's even safer from the security
POV.
Kailang Yang [Mon, 27 Oct 2014 08:20:30 +0000 (16:20 +0800)]
ALSA: hda/realtek - New SSID for Headset quirk
It is lite version of AIO machine(0x0626).
The audio layout of this machine was similar with SSID 0x0626.
The audio was same as commit ad8ff99e6beb8708b0bdefd9d5658324e90200f0.
Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Sun, 26 Oct 2014 13:49:45 +0000 (22:49 +0900)]
ALSA: bebob: fix wrong decoding of clock information for Terratec PHASE 88 Rack FW
Terratec PHASE 88 rack fw has two registers for source of clock, one is
for internal/external, and another is for wordclock/spdif for external.
When clock source is internal, information in another register has no meaning.
Thus it must be ignored, but current implementation decodes it. This causes
over-indexing reference to labels.
Reported-by: András Murányi <muranyia@gmail.com> Tested-by: András Murányi <muranyia@gmail.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Sun, 26 Oct 2014 18:35:51 +0000 (11:35 -0700)]
Merge tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Another week, another small batch of fixes.
Most of these make zynq, socfpga and sunxi platforms work a bit
better:
- due to new requirements for regulators, DWMMC on socfpga broke past
v3.17
- SMP spinup fix for socfpga
- a few DT fixes for zynq
- another option (FIXED_REGULATOR) for sunxi is needed that used to
be selected by other options but no longer is.
- a couple of small DT fixes for at91
- ...and a couple for i.MX"
* tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: imx28-evk: Let i2c0 run at 100kHz
ARM: i.MX6: Fix "emi" clock name typo
ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP
ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE
ARM: dts: socfpga: Add a 3.3V fixed regulator node
ARM: dts: socfpga: Fix SD card detect
ARM: dts: socfpga: rename gpio nodes
ARM: at91/dt: sam9263: fix PLLB frequencies
power: reset: at91-reset: fix power down register
MAINTAINERS: add atmel ssc driver maintainer entry
arm: socfpga: fix fetching cpu1start_addr for SMP
ARM: zynq: DT: trivial: Fix mc node
ARM: zynq: DT: Add cadence watchdog node
ARM: zynq: DT: Add missing reference for memory-controller
ARM: zynq: DT: Add missing reference for ADC
ARM: zynq: DT: Add missing address for L2 pl310
ARM: zynq: DT: Remove 222 MHz OPP
ARM: zynq: DT: Fix GEM register area size
Olof Johansson [Sun, 26 Oct 2014 03:44:05 +0000 (20:44 -0700)]
Merge tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Merge "ARM: imx: fixes for 3.18" from Shawn Guo:
The i.MX fixes for 3.18:
- Revert one patch which increases I2C bus frequency on imx28-evk
- Fix a typo on imx6q EIM clock name
* tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx28-evk: Let i2c0 run at 100kHz
ARM: i.MX6: Fix "emi" clock name typo
projects / ~emulex / infiniband.git / log