Akira Takeuchi [Wed, 27 Oct 2010 16:28:37 +0000 (17:28 +0100)]
MN10300: Provide the functions to fully disable maskable interrupts
The local_irq_disable() function and co. merely raise the interrupt mask on the
MN10300 arch to exclude normal interrupts. This still lets other, higher
priority maskable interrupts through, such as are used to service gdbstub's
serial port and the MN10300 on-chip serial port virtual FIFOs.
Provide functions to allow the maskable interrupts to be fully disabled, which
will exclude those interrupts.
David Howells [Wed, 27 Oct 2010 16:28:35 +0000 (17:28 +0100)]
MN10300: Prevent cnt32_to_63() from being preempted in sched_clock()
Prevent cnt32_to_63() from being preempted in sched_clock() because it may
read its internal counter, get preempted, get delayed for more than the half
period of the 'TSC' and then write the internal counter, thus corrupting it.
Whilst some callers of sched_clock() have interrupts disabled or hold
spinlocks, not all do, and so preemption must be held here.
Note that sched_clock() is called from lockdep, but that shouldn't be a problem
because although preempt_disable() calls into lockdep, lockdep has a recursion
counter to deal with this.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Wed, 27 Oct 2010 16:28:32 +0000 (17:28 +0100)]
Partially revert patch that encloses asm-offset.h numbers in brackets
Partially revert patch:
commit 3234282f33b29d349bcada40204fc7c8fda7fe72
Author: Jan Beulich <JBeulich@novell.com>
Date: Tue Oct 19 14:52:26 2010 +0100
x86, asm: Fix CFI macro invocations to deal with shortcomings in gas
This breaks MN10300 arch as this changes many instances of instructions
similar to the following:
MOV number,D0
which represents an immediate value load into:
MOV (number),D0
which the assembler then interprets as a load from absolute address.
arch/mn10300/kernel/entry.S:64: Error: Invalid opcode/operands
arch/mn10300/kernel/entry.S:65: Error: junk at end of line, first unrecognized character is `0'
arch/mn10300/kernel/entry.S:74: Error: Invalid opcode/operands
arch/mn10300/kernel/entry.S:74: Error: junk at end of line, first unrecognized character is `1'
arch/mn10300/kernel/entry.S:75: Error: Invalid opcode/operands
arch/mn10300/kernel/entry.S:76: Error: junk at end of line, first unrecognized character is `0'
cc: Jan Beulich <jbeulich@novell.com>
cc: Alexander van Heukelum <heukelum@fastmail.fm>
cc: H. Peter Anvin <hpa@linux.intel.com>
cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: David Howells <dhowells@redhat.com>
Linus Torvalds [Wed, 27 Oct 2010 01:57:59 +0000 (18:57 -0700)]
Merge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (476 commits)
vmwgfx: Implement a proper GMR eviction mechanism
drm/radeon/kms: fix r6xx/7xx 1D tiling CS checker v2
drm/radeon/kms: properly compute group_size on 6xx/7xx
drm/radeon/kms: fix 2D tile height alignment in the r600 CS checker
drm/radeon/kms/evergreen: set the clear state to the blit state
drm/radeon/kms: don't poll dac load detect.
gpu: Add Intel GMA500(Poulsbo) Stub Driver
drm/radeon/kms: MC vram map needs to be >= pci aperture size
drm/radeon/kms: implement display watermark support for evergreen
drm/radeon/kms/evergreen: add some additional safe regs v2
drm/radeon/r600: fix tiling issues in CS checker.
drm/i915: Move gpu_write_list to per-ring
drm/i915: Invalidate the to-ring, flush the old-ring when updating domains
drm/i915/ringbuffer: Write the value passed in to the tail register
agp/intel: Restore valid PTE bit for Sandybridge after bdd3072
drm/i915: Fix flushing regression from 9af90d19f
drm/i915/sdvo: Remove unused encoding member
i915: enable AVI infoframe for intel_hdmi.c [v4]
drm/i915: Fix current fb blocking for page flip
drm/i915: IS_IRONLAKE is synonymous with gen == 5
...
Fix up conflicts in
- drivers/gpu/drm/i915/{i915_gem.c, i915/intel_overlay.c}: due to the
new simplified stack-based kmap_atomic() interface
- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c: added .llseek entry due to BKL
removal cleanups.
Linus Torvalds [Wed, 27 Oct 2010 01:20:19 +0000 (18:20 -0700)]
Merge branches 'upstream/xenfs' and 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/xenfs' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
xen/privcmd: make privcmd visible in domU
xen/privcmd: move remap_domain_mfn_range() to core xen code and export.
privcmd: MMAPBATCH: Fix error handling/reporting
xenbus: export xen_store_interface for xenfs
xen/privcmd: make sure vma is ours before doing anything to it
xen/privcmd: print SIGBUS faults
xen/xenfs: set_page_dirty is supposed to return true if it dirties
xen/privcmd: create address space to allow writable mmaps
xen: add privcmd driver
xen: add variable hypercall caller
xen: add xen_set_domain_pte()
xen: add /proc/xen/xsd_{kva,port} to xenfs
* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (29 commits)
xen: include xen/xen.h for definition of xen_initial_domain()
xen: use host E820 map for dom0
xen: correctly rebuild mfn list list after migration.
xen: improvements to VIRQ_DEBUG output
xen: set up IRQ before binding virq to evtchn
xen: ensure that all event channels start off bound to VCPU 0
xen/hvc: only notify if we actually sent something
xen: don't add extra_pages for RAM after mem_end
xen: add support for PAT
xen: make sure xen_max_p2m_pfn is up to date
xen: limit extra memory to a certain ratio of base
xen: add extra pages for E820 RAM regions, even if beyond mem_end
xen: make sure xen_extra_mem_start is beyond all non-RAM e820
xen: implement "extra" memory to reserve space for pages not present at boot
xen: Use host-provided E820 map
xen: don't map missing memory
xen: defer building p2m mfn structures until kernel is mapped
xen: add return value to set_phys_to_machine()
xen: convert p2m to a 3 level tree
xen: make install_p2mtop_page() static
...
Fix up trivial conflict in arch/x86/xen/mmu.c, and fix the use of
'reserve_early()' - in the new memblock world order it is now
'memblock_x86_reserve_range()' instead. Pointed out by Jeremy.
Thomas Hellstrom [Tue, 26 Oct 2010 19:21:47 +0000 (21:21 +0200)]
vmwgfx: Implement a proper GMR eviction mechanism
Use Ben's new range manager hooks to implement a manager for
GMRs that manages ids rather than ranges.
This means we can use the standard TTM code for binding, unbinding and
eviction.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Wed, 27 Oct 2010 00:58:44 +0000 (17:58 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
split invalidate_inodes()
fs: skip I_FREEING inodes in writeback_sb_inodes
fs: fold invalidate_list into invalidate_inodes
fs: do not drop inode_lock in dispose_list
fs: inode split IO and LRU lists
fs: switch bdev inode bdi's correctly
fs: fix buffer invalidation in invalidate_list
fsnotify: use dget_parent
smbfs: use dget_parent
exportfs: use dget_parent
fs: use RCU read side protection in d_validate
fs: clean up dentry lru modification
fs: split __shrink_dcache_sb
fs: improve DCACHE_REFERENCED usage
fs: use percpu counter for nr_dentry and nr_dentry_unused
fs: simplify __d_free
fs: take dcache_lock inside __d_path
fs: do not assign default i_ino in new_inode
fs: introduce a per-cpu last_ino allocator
new helper: ihold()
...
Linus Torvalds [Wed, 27 Oct 2010 00:54:22 +0000 (17:54 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits)
IB/qib: clean up properly if pci_set_consistent_dma_mask() fails
IB/qib: Allow driver to load if PCIe AER fails
IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set
IB/qib: Fix extra log level in qib_early_err()
RDMA/cxgb4: Remove unnecessary KERN_<level> use
RDMA/cxgb3: Remove unnecessary KERN_<level> use
IB/core: Add link layer type information to sysfs
IB/mlx4: Add VLAN support for IBoE
IB/core: Add VLAN support for IBoE
IB/mlx4: Add support for IBoE
mlx4_en: Change multicast promiscuous mode to support IBoE
mlx4_core: Update data structures and constants for IBoE
mlx4_core: Allow protocol drivers to find corresponding interfaces
IB/uverbs: Return link layer type to userspace for query port operation
IB/srp: Sync buffer before posting send
IB/srp: Use list_first_entry()
IB/srp: Reduce number of BUSY conditions
IB/srp: Eliminate two forward declarations
IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144
IB: Replace EXTRA_CFLAGS with ccflags-y
...
Linus Torvalds [Wed, 27 Oct 2010 00:31:05 +0000 (17:31 -0700)]
Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
PM / Runtime: fix recursive locking warning of lockdep from rpm_resume()
Linus Torvalds [Wed, 27 Oct 2010 00:28:37 +0000 (17:28 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (53 commits)
ACPI: install ACPI table handler before any dynamic tables being loaded
ACPI / PM: Blacklist another machine that needs acpi_sleep=nonvs
ACPI: Page based coalescing of I/O remappings optimization
ACPI: Convert simple locking to RCU based locking
ACPI: Pre-map 'system event' related register blocks
ACPI: Add interfaces for ioremapping/iounmapping ACPI registers
ACPI: Maintain a list of ACPI memory mapped I/O remappings
ACPI: Fix ioremap size for MMIO reads and writes
ACPI / Battery: Return -ENODEV for unknown values in get_property()
ACPI / PM: Fix reference counting of power resources
Subject: [PATCH] ACPICA: Fix Scope() op in module level code
ACPI battery: support percentage battery remaining capacity
ACPI: Make Embedded Controller command timeout delay configurable
ACPI dock: move some functions to .init.text
ACPI: thermal: remove unused limit code
ACPI: static sleep_states[] and acpi_gts_bfs_check
ACPI: remove dead code
ACPI: delete dedicated MAINTAINERS entries for ACPI EC and BATTERY drivers
ACPI: Only processor needs CPU_IDLE
ACPICA: Update version to 20101013
...
Linus Torvalds [Wed, 27 Oct 2010 00:28:07 +0000 (17:28 -0700)]
Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6
* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
intel_idle: do not use the LAPIC timer for ATOM C2
intel_idle: add initial Sandy Bridge support
acpi_idle: delete bogus data from cpuidle_state.power_usage
intel_idle: delete bogus data from cpuidle_state.power_usage
intel_idle: simplify test for leave_mm()
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
arch/tile: convert a BUG_ON to BUILD_BUG_ON
arch/tile: make ptrace() work properly for TILE-Gx COMPAT mode
arch/tile: support new info op generated by compiler
arch/tile: minor whitespace/naming changes for string support files
arch/tile: enable single-step support for TILE-Gx
arch/tile: parameterize system PLs to support KVM port
arch/tile: add Tilera's <arch/sim.h> header as an open-source header
arch/tile: Bomb C99 comments to C89 comments in tile's <arch/sim_def.h>
arch/tile: prevent corrupt top frame from causing backtracer runaway
arch/tile: various top-level Makefile cleanups
arch/tile: change lower bound on syscall error return to -4095
arch/tile: properly export __mb_incoherent for modules
arch/tile: provide a definition of MAP_STACK
kmemleak: add TILE to the list of supported architectures.
char: hvc: check for error case
arch/tile: Add a warning if we try to allocate too much vmalloc memory.
arch/tile: update some comments to clarify register usage.
arch/tile: use better "punctuation" for VMSPLIT_3_5G and friends
arch/tile: Use <asm-generic/syscalls.h>
tile: replace some BUG_ON checks with BUILD_BUG_ON checks
Linus Torvalds [Wed, 27 Oct 2010 00:15:20 +0000 (17:15 -0700)]
Merge branch 'akpm-incoming-1'
* akpm-incoming-1: (176 commits)
scripts/checkpatch.pl: add check for declaration of pci_device_id
scripts/checkpatch.pl: add warnings for static char that could be static const char
checkpatch: version 0.31
checkpatch: statement/block context analyser should look at sanitised lines
checkpatch: handle EXPORT_SYMBOL for DEVICE_ATTR and similar
checkpatch: clean up structure definition macro handline
checkpatch: update copyright dates
checkpatch: Add additional attribute #defines
checkpatch: check for incorrect permissions
checkpatch: ensure kconfig help checks only apply when we are adding help
checkpatch: simplify and consolidate "missing space after" checks
checkpatch: add check for space after struct, union, and enum
checkpatch: returning errno typically should be negative
checkpatch: handle casts better fixing false categorisation of : as binary
checkpatch: ensure we do not collapse bracketed sections into constants
checkpatch: suggest cleanpatch and cleanfile when appropriate
checkpatch: types may sit on a line on their own
checkpatch: fix regressions in "fix handling of leading spaces"
div64_u64(): improve precision on 32bit platforms
lib/parser: cleanup match_number()
...
Joe Perches [Tue, 26 Oct 2010 21:23:20 +0000 (14:23 -0700)]
scripts/checkpatch.pl: add warnings for static char that could be static const char
Add warnings for possible missing const uses of
static char foo[] = "bar"
that could be
static const char foo[] = "bar"
and
static const char *foo[] = {"bar", "baz"}
that could be
static const char * const foo[] = {"bar", "baz"}
Signed-off-by: Joe Perches <joe@perches.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Tue, 26 Oct 2010 21:23:19 +0000 (14:23 -0700)]
checkpatch: statement/block context analyser should look at sanitised lines
When tracking context to find a block or statement we need to use the
sanitised lines, else perentheses '(' & ')' and braces '{' & '}' can throw
the scanner out. Also fix up a couple of error outputs which include
those sanitised lines incorrectly.
Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 26 Oct 2010 21:23:16 +0000 (14:23 -0700)]
checkpatch: Add additional attribute #defines
On Wed, 2010-08-11 at 12:35 -0400, Dave Jones wrote:
> I just got this from a patch I merged..
>
> ERROR: need consistent spacing around '*' (ctx:WxV)
> #121: FILE: arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c:113:
> +static struct pcc_cpu __percpu *pcc_cpu_info;
> ^
> which doesn't seem right.
Perhaps these need to be added to checkpatch.
[apw@canonical.com: added tests] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rabin Vincent [Tue, 26 Oct 2010 21:23:16 +0000 (14:23 -0700)]
checkpatch: check for incorrect permissions
Throw an error when a source file has been given execute permissions using
the mode change line present in git diffs. Also alow the filename
matching to use the "diff" line in addition to the "+++" line, since the
mode change lines appear before any "+++" lines.
[apw@canonical.com: simplified filename logic slightly, added tests] Cc: Andy Whitcroft <apw@canonical.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Tue, 26 Oct 2010 21:23:15 +0000 (14:23 -0700)]
checkpatch: ensure kconfig help checks only apply when we are adding help
When checking the length of the help we need to be sure we are seeing the
whole story before erroring. Firstly we only want to check when adding
the help in the first place. Second we need to be sure that we are seeing
the end of the entry, nominally when there is no context below or that
context shows the start of the next entry.
Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Tue, 26 Oct 2010 21:23:15 +0000 (14:23 -0700)]
checkpatch: simplify and consolidate "missing space after" checks
Commonise the code for missing spaces after struct, union, and enum such
that they share the same code. Ensure we cover all the common cases in
each case. Check against the sanitised line to ensure we do not report on
comments and strings.
Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Tue, 26 Oct 2010 21:23:14 +0000 (14:23 -0700)]
checkpatch: returning errno typically should be negative
Add a (strict mode only) test to check for non-negative returns of what
appear to be errno values as the majority case these should indeed be
negative.
Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Tue, 26 Oct 2010 21:23:12 +0000 (14:23 -0700)]
checkpatch: ensure we do not collapse bracketed sections into constants
When determining if a return () sequence is a function style bracketing we
simplify the expression one bracket at a time replacing each with a
constant. However this can trigger a false merge with expressions as
below:
return (foo)0;
Prevent this false merging.
Reported-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Tue, 26 Oct 2010 21:23:11 +0000 (14:23 -0700)]
checkpatch: types may sit on a line on their own
When the following form is used we have a type which fully fills a line.
This means that a type may end at the end of line as well as at the
following identifier.
int **
foo;
Reported-by: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Tue, 26 Oct 2010 21:23:11 +0000 (14:23 -0700)]
checkpatch: fix regressions in "fix handling of leading spaces"
The patch "checkpatch: fix handling of leading spaces" added checks for
leading spaces on lines, but this introduces regressions. Firstly it does
not correctly detect when we are in a comment. Secondly it does not allow
for preprocessor command spacing. Finally it does not allow for label
indentation which is required to be less than one tab. Fix these up:
Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Brian Behlendorf [Tue, 26 Oct 2010 21:23:10 +0000 (14:23 -0700)]
div64_u64(): improve precision on 32bit platforms
The current implementation of div64_u64 for 32bit systems returns an
approximately correct result when the divisor exceeds 32bits. Since doing
64bit division using 32bit hardware is a long since solved problem we just
use one of the existing proven methods.
Additionally, add a div64_s64 function to correctly handle doing signed
64bit division.
Artem Bityutskiy [Tue, 26 Oct 2010 21:23:08 +0000 (14:23 -0700)]
lib/list_sort: test: check element addresses
Improve 'lib_sort()' test and check that:
o 'cmp()' is called only for elements which were present in the original list,
i.e., the 'a' and 'b' parameters are valid
o the resulted (sorted) list consists onlly of the original elements
o intdoruce "poison" fields to make sure data around 'struc list_head' field
are not corrupted.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Don Mullis <don.mullis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Artem Bityutskiy [Tue, 26 Oct 2010 21:23:08 +0000 (14:23 -0700)]
lib/list_sort: test: unify test messages
This patch unifies 'list_sort_test()' messages a bit and makes sure all of
them start with the "list_sort_test:" prefix to make it obvious for users
where the messages come from.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Don Mullis <don.mullis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Artem Bityutskiy [Tue, 26 Oct 2010 21:23:07 +0000 (14:23 -0700)]
lib/list_sort: test: improve errors handling
The 'lib_sort()' test does not free memory if it fails, and it makes the
kernel panic if it cannot allocate memory. This patch fixes the problem.
This patch also changes several small things:
o use 'list_add()' helper instead of adding manually
o introduce temporary 'el1' variable to avoid ugly and unreadalbe
"if" statement
o make 'head' to be stack variable instead of 'kmalloc()'ed, which
simplifies code a bit
Overall, this patch is of clean-up type.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Don Mullis <don.mullis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Artem Bityutskiy [Tue, 26 Oct 2010 21:23:06 +0000 (14:23 -0700)]
lib/list_sort: test: use generic random32
Instead of using own pseudo-random generator, use generic linux
'random32()' function. Presumably, this should improve test coverage.
At the same time, do the following changes:
o Use shorter macro name for test list length
o Do not use strange 'l_h' name for 'struct list_head' element,
use 'list', because it is traditional name and thus, makes the
code more obvious and readable.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Don Mullis <don.mullis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Artem Bityutskiy [Tue, 26 Oct 2010 21:23:06 +0000 (14:23 -0700)]
lib/list_sort: test: use more reasonable printk levels
I do not see any reason to use KERN_WARN for normal messages and
KERN_EMERG for error messages in the lib_sort testing routine. Let's use
more reasonable KERN_NORM and KERN_ERR levels.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Don Mullis <don.mullis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Artem Bityutskiy [Tue, 26 Oct 2010 21:23:05 +0000 (14:23 -0700)]
lib/Kconfig.debug: add list_sort debugging switch
While hunting a non-existing bug in 'list_sort()', I've improved the
'list_sort_test()' function which tests the 'list_sort()' library call.
Although at the end I found a bug in my code, but not in 'list_sort()', I
think my clean-ups and improvements are worth merging because they make
the test function better.
This patch:
Make the self-tests selectable via Kconfig rather than by manual enabling
of DEBUG_LIST_SORT.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Don Mullis <don.mullis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Tue, 26 Oct 2010 21:23:05 +0000 (14:23 -0700)]
percpu_counter: add debugobj support
All percpu counters are linked to a global list on initialization and
removed from it on destruction. The list is walked during CPU up/down.
If a percpu counter is freed without being properly destroyed, the system
will oops only on the next CPU up/down making it pretty nasty to track
down. This patch adds debugobj support for percpu counters so that such
problems can be found easily.
As percpu counters don't make sense on stack and can't be statically
initialized, debugobj support is pretty simple. It's initialized and
activated on counter initialization, and deactivatd and destroyed on
counter destruction. With this patch applied, the bug fixed by commit 602586a83b719df0fbd94196a1359ed35aeb2df3 (shmem: put_super must
percpu_counter_destroy) triggers the following warning on tmpfs unmount
and the system won't oops on the next cpu up/down operation.
Naohiro Aota [Tue, 26 Oct 2010 21:23:03 +0000 (14:23 -0700)]
idr: fix idr_pre_get() locking description
Despite the idr_pre_get() kernel-doc, there are some cases where you can
call idr_pre_get() from within locked regions. Add a description for such
cases.
Joe Perches [Tue, 26 Oct 2010 21:22:59 +0000 (14:22 -0700)]
MAINTAINERS: merge imote2 and stargate
Removed by commit dcd925f95194da4 ("pxa: merge stargate2 and imote2 board
files").
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 26 Oct 2010 21:22:58 +0000 (14:22 -0700)]
scripts/get_maintainer.pl: use mailmap in name deduplication and other updates
Use Florian Mickler's mailmap routine to reduce name duplication.
o Add subroutine deduplicate_email to centralize code
o Add hashes for deduplicate_(name|address)_hash
o Remove now unused @interactive_to
o Whitespace neatening
o Add command line --help text
o Add --mailmap command line option control
o Interactive changes:
- Add toggles for maintainer, git and list selections
- Default selection is all
- Add mailmap control
Update to 0.26-beta5
Signed-off-by: Joe Perches <joe@perches.com> Cc: Florian Mickler <florian@mickler.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 26 Oct 2010 21:22:56 +0000 (14:22 -0700)]
scripts/get_maintainer.pl: use case insensitive name de-duplication
Case insensitive name and email address matching can help reduce
duplication when authors don't always use the exact same signature.
o Add a --interactive per-file exact_match hash so git history
can be checked on per-file only when there is no direct maintainer
o Make @interactive_to list global so save_commits_by_<foo> can check
email names & addresses against this list for duplication
o Don't allow --interactive and --sections
o rename subroutine get_maintainer to get_maintainers
o Added help text option to --interactive menu prompt
Update version to 0.26-beta4
Signed-off-by: Joe Perches <joe@perches.com> Cc: Florian Mickler <florian@mickler.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
o Added searching by git-blame as well as git-history
o Added different selection toggles
o Added ability to list commits by author or by sign-off-type
o Use custom git and hg formats to make searching for subject/author
a bit easier.
o Move inlined section matching and searching git/hg history to
new get_maintainer subroutine
o Added subroutines save_commits_by_author and save_commits_by_signer
o Removed subroutines vcs_get_shortlog and vcs_email_shortlog
o Rename camelcase signaturePattern to signature_pattern
Update to 0.26 beta3
Signed-off-by: Joe Perches <joe@perches.com> Cc: Florian Mickler <florian@mickler.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Mickler [Tue, 26 Oct 2010 21:22:54 +0000 (14:22 -0700)]
scripts/get_maintainer.pl: add interactive mode
This is a first version of an interactive mode for
scripts/get_maintainer.pl.
It allows the user to interact with the script. Each cc candidate can be
selected and deselected and a shortlog of authored commits can be
displayed for each candidate.
The menu is displayed via STDERR, the end result is outputted to STDOUT.
This unusual mechanism allows using get_maintainer.pl in interactive mode
via git send-email --cc-cmd.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 26 Oct 2010 21:22:53 +0000 (14:22 -0700)]
scripts/get_maintainer.pl: use .get_maintainer.conf from . then $HOME then scripts
On Mon, 2010-09-13 at 00:01 -0400, Valdis.Kletnieks@vt.edu wrote:
> Any chance of getting that to be ~/.get_maintainer.conf rather than
> ./.get_maintainer.conf? I've just gotten bit like the 3rd or 4th time by
> "oh but you didn't create that file in *this* tree"
> (I usually have a linus git tree, a linux-next tree, and 3-4 -mm trees)
Sure.
Add a search path for the .conf file.
3 paths are added:
. customized per-tree configurations
$HOME user global configuration when per-tree configs don't exist
./scripts lk defaults to override script
Signed-off-by: Joe Perches <joe@perches.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adding commit signers when there is a listed MAINTAINER for a file
can make the output list longer than necessary.
Change the --git default from on to off.
Add a new --git-fallback option (default on) used to add commit signers
only when there is no MAINTAINER for a file.
git history is used when --git-fallback is enabled and the pattern
directory depth is not the same as the file directory depth.
For instance:
X86 ARCHITECTURE (32-BIT AND 64-BIT)
M: Thomas Gleixner <tglx@linutronix.de>
M: Ingo Molnar <mingo@redhat.com>
M: "H. Peter Anvin" <hpa@zytor.com>
M: x86@kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
S: Maintained
F: Documentation/x86/
F: arch/x86/
If using "./scripts/get_maintainer -f arch/x86/lib/atomic64_32.c", the pattern
for "arch/x86/" does not match the directory depth of "arch/x86/lib"
so the MAINTAINERS entries and git history is used to produce:
Luca Barbieri is added because he signed the only commit to
arch/x86/lib/atomic64_32.c during the last year and he meets the
other default qualifications.
--git-min-percent (default:10)
--git-min-signatures (default:1)
If current users of ./scripts/get_maintainers.pl have scripts
that use --nogit that expect git history to be excluded, those
scripts should be updated to include --nogit-fallback or a
.get_maintainer.conf file should be created with --nogit-fallback.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 26 Oct 2010 21:22:52 +0000 (14:22 -0700)]
scripts/get_maintainer.pl: don't search MAINTAINERS for keywords or emails
Keyword matching uses K: patterns from MAINTAINERS, so if looking for the
MAINTAINERS maintainer, don't search MAINTAINERS for pattern matches.
MAINTAINERS also has rather a lot of email addresses and is easily
searched using grep "^M:", so skip it.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 26 Oct 2010 21:22:51 +0000 (14:22 -0700)]
scripts/get_maintainer.pl: Add --git-blame --rolestats "Authored lines" information
When options --git-blame and --rolestats are specified, add
the maintainers with the qualifying --git-min-percent amount
of lines authored of the complete file. Does not add more
authors than specified by --git-max-maintainers.
For anyone using hg, this option works but is _very_ slow.
It's orders of magnitude slower than git slow.
The get_maintainer.pl version was incremented to 0.25.
This can be used with or without --git.
For instance:
$ ./scripts/get_maintainer.pl --git-blame --nogit --rolestats -f lib/bitmap.c
Paul Jackson <pj@sgi.com> (authored lines:406/613=66%,commits:7/20=35%)
Akinobu Mita <mita@miraclelinux.com> (authored lines:87/613=14%,commits:3/20=15%)
Reinette Chatre <reinette.chatre@linux.intel.com> (authored lines:42/613=7%)
Andrew Morton <akpm@linux-foundation.org> (commits:16/20=80%)
Paul Mundt <lethal@linux-sh.org> (commits:3/20=15%)
Randy Dunlap <randy.dunlap@oracle.com> (commits:2/20=10%)
$ ./scripts/get_maintainer.pl --git-blame --git --rolestats -f lib/bitmap.c
Andrew Morton <akpm@linux-foundation.org> (commit_signer:4/5=80%,commits:16/20=80%)
Akinobu Mita <akinobu.mita@gmail.com> (commit_signer:2/5=40%,authored lines:87/613=14%,commits:3/20=15%)
Jack Steiner <steiner@sgi.com> (commit_signer:1/5=20%)
Ben Hutchings <ben@decadent.org.uk> (commit_signer:1/5=20%)
Lee Schermerhorn <lee.schermerhorn@hp.com> (commit_signer:1/5=20%)
Paul Jackson <pj@sgi.com> (authored lines:406/613=66%,commits:7/20=35%)
Reinette Chatre <reinette.chatre@linux.intel.com> (authored lines:42/613=7%)
Paul Mundt <lethal@linux-sh.org> (commits:3/20=15%)
Randy Dunlap <randy.dunlap@oracle.com> (commits:2/20=10%)
linux-kernel@vger.kernel.org (open list)
Signed-off-by: Joe Perches <joe@perches.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Namhyung Kim [Tue, 26 Oct 2010 21:22:48 +0000 (14:22 -0700)]
printk: change type of 'boot_delay' to int *
get_option() takes its 2nd arg as int * so passing boot_delay to it
caused following warnings from sparse:
kernel/printk.c:223:27: warning: incorrect type in argument 2 (different signedness)
kernel/printk.c:223:27: expected int *pint
kernel/printk.c:223:27: got unsigned int static [toplevel] *<noident>
Since boot_delay can't grow more than 10,000 changing it to 'int *'
will not produce any problem.
Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Borislav Petkov [Tue, 26 Oct 2010 21:22:46 +0000 (14:22 -0700)]
misc devices: do not enable by default
Do not enable this Kconfig menu by default since it contains devices not
present on the majority of systems.
This is becoming a pain and a waste of time especially when doing a bunch
of kernel builds on different systems daily and have to answer "make
oldconfig" prompts for strange devices.
Signed-off-by: Borislav Petkov <bp@alien8.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Andres Salomon <dilinger@collabora.co.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Tue, 26 Oct 2010 21:22:45 +0000 (14:22 -0700)]
stop_machine: convert cpu notifier to return encapsulate errno value
In commit e6bde73b07edeb703d4c89c1daabc09c303de11f ("cpu-hotplug: return
better errno on cpu hotplug failure"), the cpu notifier can return an
encapsulated errno value.
This converts the cpu notifier to return an encapsulated errno value for
stop_machine().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Tue, 26 Oct 2010 21:22:44 +0000 (14:22 -0700)]
fs: allow for more than 2^31 files
Robin Holt tried to boot a 16TB system and found af_unix was overflowing
a 32bit value :
<quote>
We were seeing a failure which prevented boot. The kernel was incapable
of creating either a named pipe or unix domain socket. This comes down
to a common kernel function called unix_create1() which does:
atomic_inc(&unix_nr_socks);
if (atomic_read(&unix_nr_socks) > 2 * get_max_files())
goto out;
The function get_max_files() is a simple return of files_stat.max_files.
files_stat.max_files is a signed integer and is computed in
fs/file_table.c's files_init().
In our case, mempages (total_ram_pages) is approx 3,758,096,384
(0xe0000000). That leaves max_files at approximately 1,503,238,553.
This causes 2 * get_max_files() to integer overflow.
</quote>
Fix is to let /proc/sys/fs/file-nr & /proc/sys/fs/file-max use long
integers, and change af_unix to use an atomic_long_t instead of atomic_t.
get_max_files() is changed to return an unsigned long. get_nr_files() is
changed to return a long.
unix_nr_socks is changed from atomic_t to atomic_long_t, while not
strictly needed to address Robin problem.
Before patch (on a 64bit kernel) :
# echo 2147483648 >/proc/sys/fs/file-max
# cat /proc/sys/fs/file-max
-18446744071562067968
Reported-by: Robin Holt <holt@sgi.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David Miller <davem@davemloft.net> Reviewed-by: Robin Holt <holt@sgi.com> Tested-by: Robin Holt <holt@sgi.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Namhyung Kim [Tue, 26 Oct 2010 21:22:42 +0000 (14:22 -0700)]
init: mark __user address space on string literals
When calling syscall service routines in kernel, some of arguments should
be user pointers but were missing __user markup on string literals. Add
it. Removes some sparse warnings.
Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hong Liu [Tue, 26 Oct 2010 21:22:42 +0000 (14:22 -0700)]
drivers/misc/apds9802als.c: add runtime PM support
Update the driver for the needed runtime power features. Remove the old
user controlled power functions.
[akpm@linux-foundation.org: put PM code under CONFIG_PM] Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
anantha [Tue, 26 Oct 2010 21:22:41 +0000 (14:22 -0700)]
drivers/misc/apds9802als.c: ALS drivers for the apds9802als
This adds support for the ADPS9802ALS sensor.
Cleanup by Alan Cox
- move mutexes to cover more things
- report I/O errors back to user space
- report range and values in LUX
Signed-off-by: Anantha Narayanan <anantha.narayanan@intel.com>
[The 4K and 64K in the hw spec actually means 4095 (12bit) and 65535 (16bit).] Signed-off-by: Hong Liu <hong.liu@intel.com>
[Updated to match the ALS light API interface convention from Samu] Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alek Du [Tue, 26 Oct 2010 21:22:41 +0000 (14:22 -0700)]
pca953x: pca953x driver fixes for x86 mrst
Our Moorestown platform has two max7315 chips which is covered by pca953x
i2c gpio driver.
A while ago this driver got updated with nested irq thread support, and it
broke the compatibity with "request_irq". For example, the gpio_keys.c
driver can not work with this driver now. This patch fixes the issue by
switching to generic_handle_irq.
Also fix the irq_base issue: irq_base == 0 is valid, and a "-1" value
should mean invalid. IRQ 0 is not a valid IRQ, irq_base of 0 is valid.
Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kalhan Trisal [Tue, 26 Oct 2010 21:22:40 +0000 (14:22 -0700)]
drivers/misc/isl29020.c: ambient light sensor
The LS driver will read the latest Lux measurement based upon the light
brightness and will report the LUX output through sysfs interface.
This hardware isn't quite the same as the ISL29003 so has a different
driver.
[akpm@linux-foundation.org: put PM code under #ifdef CONFIG_PM] Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
[Runtime power management support added] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
[Fixes to runtime PM] Signed-off-by: Liu Hong <hong.liu@intel.com>
[Cleanups and added checks for I2C errors, reworked the API to match the
saner one agreed for other sensors] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>