Rearrange macros to query for storage-only modes in different MF environment.
Improves the readibility and maintainability of the code. E.g.:
- if (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp))
+ if (IS_MF_STORAGE_ONLY(bp))
In addition, this removes the need for bnx2x_is_valid_ether_addr().
Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch sets the change to of_phy_connect() that you have seen before,
this time with the full context of why it is useful and applicable here.
Due to some design decision, the internal PHY on Broadcom BCM7xxx chips
is not entirely self contained and does not report its internal revision
through MII_PHYSID2, that is left to external PHY designs.
This forces us to get the PHY revision from the GENET and SF2 switch drivers
because those two peripherals integrate such a PHY and do contain the PHY
revision in their registers.
The approach taken here is hopefully easy to extend to similar needs for
other chips/ as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: bcm7xxx: utilize PHY revision in config_init
Now that the GENET and SF2 drivers have been updated to communicate us
what is the revision of the BCM7xxx integrated PHY, utilize that
information in the config_init() callback to call into the appropriate
workaround function based on our revision.
While at it, we also print the revision and patch level to help debug
new chips.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: bcm_sf2: communicate integrated PHY revision to PHY driver
The integrated BCM7xxx PHY contains no useful revision information
in its MII_PHYSID2 bits 3:0, that information is instead contained in
the SWITCH_REG_PHY_REVISION register.
Read this register, store its value, and return it by implementing the
dsa_switch::get_phy_flags() callback accordingly. The register layout is
already matching what the BCM7xxx PHY driver is expecting to find.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: allow switch drivers to specify phy_device::dev_flags
Some switch drivers (e.g: bcm_sf2) may have to communicate specific
workarounds or flags towards the PHY device driver. Allow switches
driver to be delegated that task by introducing a get_phy_flags()
callback which will do just that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: bcmgenet: communicate integrated PHY revision to PHY driver
The integrated BCM7xxx PHY contains no useful revision information in
its MII_PHYSID2 bits 3:0, that information is instead contained in the
GENET hardware block.
We already read the GENET 32-bit revision register, so store the
integrated PHY revision in the driver private structure, and then
communicate this revision value to the PHY driver by overriding the
phy_flags value.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have removed the need for the PHY_BRCM_100MBPS_WAR flag, we
can remove it from the GENET driver and the broadcom shared header file.
The PHY driver checks the PHY supported bitmask instead.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: bcm7xxx: do not use PHY_BRCM_100MBPS_WAR
There is no need for the PHY driver to check PHY_BRCM_100MBPS_WAR since
that is redundant with checking the PHY device supported features. Get
rid of that workaround flag.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: broadcom: add helper for PHY revision and patch level
The Broadcom BCM7xxx internal PHYs do not contain any useful revision
information in the low 4-bits of their MII_PHYSID2 (MII register 3)
which could allow us to properly identify them.
As a result, we need the actual hardware block integrating these PHYs:
GENET or the SF2 switch to tell us what revision they are built with. To
assist with that, add two helper macros for fetching the the PHY
revision and patch level from the struct phy_device::dev_flags.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f9a8f83b04e0 ("net: phy: remove flags argument from phy_{attach,
connect, connect_direct}") removed the flags argument to the PHY library
calls to: phy_{attach,connect,connect_direct}.
Most Device Tree aware drivers call of_phy_connect() with the flag
argument set to 0, but some of them might want to set a different value
there in order for the PHY driver to key a specific behavior based on
the phy_device::phy_flags value.
Allow such drivers to set custom phy_flags as part of the
of_phy_connect() call since of_phy_connect() does start the PHY state
machine, it will call into the PHY driver config_init() callback which
is usually where a specific phy_flags value is important.
Fixes: f9a8f83b04e0 ("net: phy: remove flags argument from phy_{attach, connect, connect_direct}") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Sep 2014 19:57:46 +0000 (15:57 -0400)]
Merge branch 'udp-tunnel-common'
Andy Zhou says:
====================
Refactor vxlan and l2tp to use new common UDP tunnel APIs
This patch series add a few more UDP tunnel APIs and refactoring current
UDP tunnel based protocols, vxlan and l2tp to make use of the new APIs.
The added APIs are setup_udp_tunnel_sock(), udp_tunnel_xmit_skb() and
udp_tunnel_sock_release(). Those implementation logics already exist in
current vxlan and l2tp implementation. Move them to common APIs to reduce
code duplications.
Also split udp_tunnel.c into net/ipv4/udp_tunnel.c and
net/ipv6/ip6_udp_tunnel.c to maintain proper IP protocol separation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Change from v2 to v3
- add error check in fec_enet_set_coalesce
- fix a run time warning to get clock rate in interrupt
- fix commit message use TKT number
Change from v1 to v2
- fix indention
- use errata number instead of TKT
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: fec: Workaround for imx6sx enet tx hang when enable three queues
When enable three queues on imx6sx enet, and then do tx performance
test with iperf tool, after some time running, tx hang.
Found that:
If uDMA is running, software set TDAR may cause tx hang.
If uDMA is in idle, software set TDAR don't cause tx hang.
There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.
The issue exist at i.MX6SX enet IP.
So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.
The patch is only one Workaround for the issue ERR007885.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: fec: add interrupt coalescence feature support
i.MX6 SX support interrupt coalescence feature
By default, init the interrupt coalescing frame count threshold and
timer threshold.
Supply the ethtool interfaces as below for user tuning to improve
enet performance:
rx_max_coalesced_frames
rx_coalesce_usecs
tx_max_coalesced_frames
tx_coalesce_usecs
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Tue, 16 Sep 2014 07:33:42 +0000 (00:33 -0700)]
net: sched: cls_cgroup need tcf_exts_init in all cases
This ensures the tcf_exts_init() is called for all cases.
Fixes: 952313bd62589cae216a57 ("net: sched: cls_cgroup use RCU") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Sep 2014 20:21:48 +0000 (16:21 -0400)]
Merge branch 'net_next_ovs' of git://git.kernel.org/pub/scm/linux/kernel/git/pshelar/openvswitch
Pravin B Shelar says:
====================
Open vSwitch
Following patches adds recirculation and hash action to OVS.
First patch removes pointer to stack object. Next three patches
does code restructuring which is required for last patch.
Recirculation implementation is changed, according to comments from
David Miller, to avoid using recursive calls in OVS. It is using
queue to record recirc action and deferred recirc is executed at
the end of current actions execution.
v1-v2:
Changed subsystem name in subject to openvswitch
v2-v3:
Added patch to remove pkt_key pointer from skb->cb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Tue, 16 Sep 2014 06:31:42 +0000 (23:31 -0700)]
net: sched: cls_fw: add missing tcf_exts_init call in fw_change()
When allocating a new structure we also need to call tcf_exts_init
to initialize exts.
A follow up patch might be in order to remove some of this code
and do tcf_exts_assign(). With this we could remove the
tcf_exts_init/tcf_exts_change pattern for some of the classifiers.
As part of the future tcf_actions RCU series this will need to be
done. For now fix the call here.
Fixes e35a8ee5993ba81fd6c0 ("net: sched: fw use RCU") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/sched/cls_cgroup.c:130 cls_cgroup_change() warn: possible memory leak of 'new'
net/sched/cls_cgroup.c:135 cls_cgroup_change() warn: possible memory leak of 'new'
net/sched/cls_cgroup.c:139 cls_cgroup_change() warn: possible memory leak of 'new'
Fixes: c7953ef23042b7c4fc2be5ecdd216aac ("net: sched: cls_cgroup use RCU") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Tue, 16 Sep 2014 06:30:26 +0000 (23:30 -0700)]
net: sched: fix unsued cpu variable
kbuild test robot reported an unused variable cpu in cls_u32.c
after the patch below. This happens when PERF and MARK config
variables are disabled
Fix this is to use separate variables for perf and mark
and define the cpu variable inside the ifdef logic.
Fixes: 459d5f626da7 ("net: sched: make cls_u32 per cpu")' Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
'p->h' could be NULL while 'cp->h' is always update to date.
Fixes: commit 331b72922c5f58d48fd ("net: sched: RCU cls_tcindex") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-By: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 15 Sep 2014 23:43:42 +0000 (16:43 -0700)]
net_sched: fix memory leak in cls_tcindex
Fixes: commit 331b72922c5f58d48fd ("net: sched: RCU cls_tcindex") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-By: John Fastabend <john.r.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Zhou [Tue, 16 Sep 2014 02:37:25 +0000 (19:37 -0700)]
openvswitch: Add recirc and hash action.
Recirc action allows a packet to reenter openvswitch processing.
currently openvswitch lookup flow for packet received and execute
set of actions on that packet, with help of recirc action we can
process/modify the packet and recirculate it back in openvswitch
for another pass.
OVS hash action calculates 5-tupple hash and set hash in flow-key
hash. This can be used along with recirculation for distributing
packets among different ports for bond devices.
For example:
OVS bonding can use following actions:
Match on: bond flow; Action: hash, recirc(id)
Match on: recirc-id == id and hash lower bits == a;
Action: output port_bond_a
Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
The current sample() function implementation is more complicated
than necessary in handling single user space action optimization
and skb reference counting. There is no functional changes.
Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
openvswitch: Use tun_key only for egress tunnel path.
Currently tun_key is used for passing tunnel information
on ingress and egress path, this cause confusion. Following
patch removes its use on ingress path make it egress only parameter.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com>
OVS flow extract is called on packet receive or packet
execute code path. Following patch defines separate API
for extracting flow-key in packet execute code path.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com>
OVS keeps pointer to packet key in skb->cb, but the packet key is
store on stack. This could make code bit tricky. So it is better to
get rid of the pointer.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
dsa_of_probe() still used cd->mii_bus instead of cd->host_dev when
building with CONFIG_OF=y. Fix this by making the replacement here as
well.
Fixes: b4d2394d01b ("dsa: Replace mii_bus with a generic host device") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 15 Sep 2014 21:06:49 +0000 (14:06 -0700)]
net_sched: use tcindex_filter_result_init()
Fixes: commit 331b72922c5f58d48fd ("net: sched: RCU cls_tcindex") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: commit 331b72922c5f58d48fd ("net: sched: RCU cls_tcindex") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 15 Sep 2014 21:06:46 +0000 (14:06 -0700)]
net_sched: fix an allocation bug in tcindex_set_parms()
Fixes: commit 331b72922c5f58d48fd ("net: sched: RCU cls_tcindex") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 15 Sep 2014 21:21:50 +0000 (14:21 -0700)]
net_sched: fix suspicious RCU usage in cls_bpf_classify()
Fixes: commit 1f947bf151e90ec0baad2948 ("net: sched: rcu'ify cls_bpf") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Sep 2014 21:24:29 +0000 (17:24 -0400)]
Merge branch 'dsa-next'
Alexander Duyck says:
====================
DSA Cleanups
This patch series does two things, first it cleans up the tag_protocol and
protocol ops being configured seperately. Second it addresses the desire
to split DSA away from relying on a MII bus.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Mon, 15 Sep 2014 17:00:27 +0000 (13:00 -0400)]
dsa: Replace mii_bus with a generic host device
This change makes it so that instead of passing and storing a mii_bus we
instead pass and store a host_dev. From there we can test to determine the
exact type of device, and can verify it is the correct device for our switch.
So for example it would be possible to pass a device pointer from a pci_dev
and instead of checking for a PHY ID we could check for a vendor and/or device
ID.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Mon, 15 Sep 2014 17:00:19 +0000 (13:00 -0400)]
dsa: Split ops up, and avoid assigning tag_protocol and receive separately
This change addresses several issues.
First, it was possible to set tag_protocol without setting the ops pointer.
To correct that I have reordered things so that rcv is now populated before
we set tag_protocol.
Second, it didn't make much sense to keep setting the device ops each time a
new slave was registered. So by moving the receive portion out into root
switch initialization that issue should be addressed.
Third, I wanted to avoid sending tags if the rcv pointer was not registered
so I changed the tag check to verify if the rcv function pointer is set on
the root tree. If it is then we start sending DSA tagged frames.
Finally I split the device ops pointer in the structures into two spots. I
placed the rcv function pointer in the root switch since this makes it
easiest to access from there, and I placed the xmit function pointer in the
slave for the same reason.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Sep 2014 21:19:55 +0000 (17:19 -0400)]
Merge branch 'bonding-cleanups'
Nikolay Aleksandrov says:
====================
bonding: style, comment and assertion changes
This is a small and simple patch-set that doesn't introduce (hopefully) any
functional changes, but only stylistic and semantic ones.
Patch 01 simply uses the already provided __rlb_next_rx_slave function inside
rlb_next_rx_slave(), thus removing the duplication of code.
Patch 02 changes all comments that I could find to netdev style, removes
some outdated ones and fixes a few more small cosmetic issues (new line
after declaration, braces around if; else and such)
Patch 03 removes one extra ASSERT_RTNL() because we already have it in the
parent function and consolidates two other ASSERT_RTNL()s to the function
that is exported and supposed to be called with RTNL anyway.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: consolidate ASSERT_RTNL()s and remove the unnecessary
Consolidate the calls to ASSERT_RTNL() before bond_select_active_slave()
inside bond_select_active_slave() itself and remove the ASSERT_RTNL()
from bond_hw_addr_swap() as it's not exported and its only caller -
bond_change_active_slave() already has an ASSERT_RTNL().
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
First adjust a couple of locking comments that were left inaccurate,
then adjust comments to use the netdev styling and remove extra new
lines where necessary and add a couple of new lines between declarations
and code. These are all trivial styling changes, no functional change.
Also removed a couple of outdated or obvious comments.
This patch is by no means a complete fix of all netdev style violations
but it gets the bonding closer.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: consolidate the two rlb_next_rx_slave functions into one
__rlb_next_rx_slave() is a copy of rlb_next_rx_slave() with the
difference that it uses rcu primitives to walk the slave list. We don't
need the two functions and can make rlb_next_rx_slave() a wrapper for
callers which hold RTNL.
So add a comment and ASSERT_RTNL() to make sure what is intended.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Sep 2014 18:41:12 +0000 (14:41 -0400)]
Merge branch 'tcpflags'
Eric Dumazet says:
====================
tcp: no longer keep around headers in input path
Looking at tcp_try_coalesce() I was wondering why I did :
if (tcp_hdr(from)->fin)
return false;
The answer would be to allow the aggregation, if we simply OR the FIN and PSH
flags eventually present in @from to @to packet. (Note a change is also
needed in skb_try_coalesce() to avoid calling skb_put() with 0 len)
Then, looking at tcp_recvmsg(), I realized we access tcp_hdr(skb)->syn
(and maybe tcp_hdr(skb)->fin) for every packet we process from socket
receive queue.
We have to understand TCP flags are cold in cpu caches most of the time
(assuming TCP timestamps, and that application calls recvmsg() a long
time after incoming packet was processed), and bringing a whole
cache line only to access one bit is not very nice.
It would make sense to use in TCP input path TCP_SKB_CB(skb)->tcp_flags
as we do in output path.
This saves one cache line miss, and TCP tcp_collapse() can avoid dealing
with the headers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 15 Sep 2014 11:19:53 +0000 (04:19 -0700)]
tcp: do not copy headers in tcp_collapse()
tcp_collapse() wants to shrink skb so that the overhead is minimal.
Now we store tcp flags into TCP_SKB_CB(skb)->tcp_flags, we no longer
need to keep around full headers.
Whole available space is dedicated to the payload.
Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 15 Sep 2014 11:19:51 +0000 (04:19 -0700)]
tcp: use TCP_SKB_CB(skb)->tcp_flags in input path
Input path of TCP do not currently uses TCP_SKB_CB(skb)->tcp_flags,
which is only used in output path.
tcp_recvmsg(), looks at tcp_hdr(skb)->syn for every skb found in receive queue,
and its unfortunate because this bit is located in a cache line right before
the payload.
We can simplify TCP by copying tcp flags into TCP_SKB_CB(skb)->tcp_flags.
This patch does so, and avoids the cache line miss in tcp_recvmsg()
Following patches will
- allow a segment with FIN being coalesced in tcp_try_coalesce()
- simplify tcp_collapse() by not copying the headers.
Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: bpf: correctly handle errors in sk_attach_filter()
Commit "net: bpf: make eBPF interpreter images read-only" has changed bpf_prog
to be vmalloc()ed but never handled some of the errors paths of the old code.
On error within sk_attach_filter (which userspace can easily trigger), we'd
kfree() the vmalloc()ed memory, and leak the internal bpf_work_struct.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Sat, 13 Sep 2014 06:12:46 +0000 (23:12 -0700)]
netdevice: Support DSA tagging when DSA is built as a module
This change corrects an error seen when DSA tagging is built as a module.
Without this change it is not possible to get XDSA tagged frames as the
test for tagging is stripped by the #ifdef check.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bo Shen [Fri, 12 Sep 2014 23:57:49 +0000 (01:57 +0200)]
net/macb: Add hardware revision information during probe
Print the IP revision when probing.
Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Sep 2014 21:32:29 +0000 (17:32 -0400)]
Merge branch 'fec-next'
Frank Li says:
====================
net: fec: imx6sx multiqueue support
These patches enable i.MX6SX multi queue support.
i.MX6SX support 3 queue and AVB feature.
Change from v3 to v4
- use "unsigned int" instead of "unsigned"
Change from v2 to v3
- fixed alignment requirement for ARM and NO-ARM platform
Change from v1 to v2.
- Change num_tx_queue to unsigned int
- Avoid block non-dt platform
- remove call netif_set_real_num_rx_queues
- seperate multi queue patch two part, one is tx and rx handle, with fixed queue 0
then other one is initilized multiqueue
- use two difference alignment for tx and rx path
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Li [Fri, 12 Sep 2014 21:00:56 +0000 (05:00 +0800)]
ARM: Documentation: Update fec dts binding doc
This patch update fec devicetree binding doc that add Optional
properties "fsl,num-tx-queues" and "fsl,num-rx-queues".
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: fec: change FEC alignment according to i.mx6 sx requirement
i.MX6 SX change FEC alignment requirement.
i.MX6 SX change internal bus from AHB to AXI.
It require RX buffer must be 64 bytes alignment.
And remove TX buffer alignment requirement.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add compatible string "fsl,imx6sx-fec" for i.MX6SX.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Li [Fri, 12 Sep 2014 21:00:52 +0000 (05:00 +0800)]
net: fec: add enet-avb IP support
i.MX6SX Enet-AVB support 3 tx queues, 3 rx queues.
For tx queues: ring 0 -> best effort
ring 1 -> Class A
ring 2 -> Class B
For rx queues:
ring 0 -> best effort
ring 1 -> receive VLAN packet with classification match
ring 2 -> receive VLAN packet with classification match
Add enet-avb IP multiqueue support for the driver.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net:fec: Disable enet-avb MAC instead of reset MAC
For i.MX6SX enet use AXI bus, reset MAC will make system bus dead
if ENET-AXI bus has pending access (AHB bus should not have such issue).
So, disable enet with AVB MAC instead of reset MAC itself.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Li [Fri, 12 Sep 2014 21:00:50 +0000 (05:00 +0800)]
net: fec: init multi queue date structure
initilized all queues according to queue number get from DT file.
Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Duan Fugang <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
By default, the tx/rx queue number is 1, user can config the queue number
at DTS file like this:
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>
Since i.MX6SX enet-AVB IP support multi queues, so use multi queues
interface to allocate and set up an Ethernet device.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: fec: change data structure to support multiqueue
This patch just change data structure to support multi-queue.
Only 1 queue enabled.
Ethernet multiqueue mechanism can improve performance in SMP system.
For single hw queue, multiqueue can balance cpu loading.
For multi hw queues, multiple cores can process network packets in parallel,
and refer the article for the detail advantage for multiqueue:
http://vger.kernel.org/~davem/davem_nyc09.pdf
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <frank.li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net:fec: add enet AVB feature macro define for imx6sx
Add enet AVB feature macro define for imx6sx.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net:fec: add enet refrence clock for i.MX 6SX chip
i.MX6sx enet has below clocks for user config:
clk_ipg: ipg_clk_s, ipg_clk_mac0_s, 66Mhz
clk_ahb: enet system clock, it is enet AXI clock for imx6sx.
For imx6sx, it alos is the clock source of interrupt coalescing.
The clock range: 200Mhz ~ 266Mhz.
clk_ref: refrence clock for tx and rx. For imx6sx enet RGMII mode,
the refrence clock is 125Mhz coming from internal PLL or external.
In i.MX6sx-arm2 board, the clock is from internal PLL.
clk_ref is optional, depends on board.
clk_enet_out: The clock can be output from internal PLL. It can supply 50Mhz
clock for phy. clk_enet_out is optional, depends on chip and board.
clk_ptp: 1588 ts clock. It is optional, depends on chip.
The patch add clk_ref to distiguish the different clocks.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Fri, 12 Sep 2014 21:58:44 +0000 (23:58 +0200)]
net: DSA: Marvell mv88e6171 switch driver
This is the Marvell driver with some cleanups by Claudio Leite
and myself.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Claudio Leite <leitec@staticky.com> Signed-off-by: Claudio Leite <leitec@staticky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Fri, 12 Sep 2014 12:09:21 +0000 (17:39 +0530)]
be2net: enable PCIe error reporting on VFs too
Currently PCIe error reporting is enabled only on PFs. This patch enables
this feature on VFs too as Lancer VFs support it.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Fri, 12 Sep 2014 12:09:20 +0000 (17:39 +0530)]
be2net: send a max of 8 EQs to be_cmd_modify_eqd() on Lancer
The MODIFY_EQ_DELAY FW cmd on Lancer is supported for a max of 8 EQs per cmd.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Report the ethtool port-type/supported/advertising values based on the
cable_type for QSFP and SFP+ interfaces. The cable_type is parsed from
the transceiver data fetched from the FW.
Signed-off-by: Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com> Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Leonard [Fri, 12 Sep 2014 12:09:18 +0000 (17:39 +0530)]
be2net: add ethtool "-m" option support
This patch adds support for the dump-module-eeprom and module-info
ethtool options.
Signed-off-by: Mark Leonard <mark.leonard@emulex.com> Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In some configurations the FW doesn't allow changing flow control settings
of a link. Unless a v1 version of the SET_FLOW_CONTROL cmd is used, the FW
doesn't report an error to the driver.
Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In the RX path, the driver currently consumes upto 64 (budget) packets in
one NAPI sweep. When the size of the packet received is larger than a
fragment size (2K), more than one fragment is consumed for each packet.
As the driver currently posts a max of 64 fragments, all the consumed
fragments may not be replenished. This can cause avoidable drops in RX path.
This patch fixes this by posting a max(consumed_frags, 64) frags. This is
done only when there are atleast 64 free slots in the RXQ.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the following minor issues with log messages in be2net:
1) Period is not required at the end of log message.
2) Remove "Unknown grp5 event" logs to reduce noise. The driver can safely
ignore async events from FW it's not interested in.
3) Reword a log message for better readability to say that SRIOV
"is disabled" rather than "not supported".
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: filter: constify detection of pkt_type_offset
Currently we have 2 pkt_type_offset functions doing the same thing and
spread across the architecture files. Remove those and replace them
with a PKT_TYPE_OFFSET macro helper which gets the constant value from a
zero sized sk_buff member right in front of the bitfield with offsetof.
This new offset marker does not change size of struct sk_buff.
Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we introduced an additional multiplexing/demultiplexing layer
with commit 3e8a72d1dae37 ("net: dsa: reduce number of protocol hooks")
that lives within the DSA code, we no longer need to have a given switch
driver tag_protocol be an actual ethertype value, instead, we can
replace it with an enum: dsa_tag_protocol.
Do this replacement in the drivers, which allows us to get rid of the
cpu_to_be16()/htons() dance, and remove ETH_P_BRCMTAG since we do not
need it anymore.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: stmmac: fix return value check in socfpga_dwmac_parse_data()
In case of error, the function devm_ioremap_resource() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Thu, 11 Sep 2014 22:07:16 +0000 (15:07 -0700)]
ipv6: exit early in addrconf_notify() if IPv6 is disabled
If IPv6 is explicitly disabled before the interface comes up,
it makes no sense to continue when it comes up, even just
print a message.
(I am not sure about other cases though, so I prefer not to touch)
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Sep 2014 20:38:53 +0000 (16:38 -0400)]
Merge branch 'ipv6-cleanups'
Cong Wang says:
====================
ipv6: clean up locking code in anycast and mcast
This patchset cleans up the locking code in anycast.c and mcast.c
and makes the refcount code more readable.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
v1 -> v2:
* refactor some code and make it in a separated patch
* update comments
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Sep 2014 20:29:57 +0000 (16:29 -0400)]
Merge branch 'bonding-next'
Nikolay Aleksandrov says:
====================
bonding: get rid of curr_slave_lock
This is the second patch-set dealing with bond locking and the purpose here
is to convert curr_slave_lock into a spinlock called "mode_lock" which can
be used in the various modes for their specific needs. The first three
patches cleanup the use of curr_slave_lock and prepare it for the
conversion which is done in patch 4 and then the modes that were using
their own locks are converted to use the new "mode_lock" giving us the
opportunity to remove their locks.
This patch-set has been tested in each mode by running enslave/release of
slaves in parallel with traffic transmission and miimon=1 i.e. running
all the time. In fact this lead to the discovery of a subtle bug related to
RCU which will be fixed in -net.
Also did an allmodconfig test just in case :-)
v2: fix bond_3ad_state_machine_handler's use of mode_lock and
curr_slave_lock
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that locks have been removed, remove some unnecessary comments and
adjust others to reflect reality. Also add a comment to "mode_lock" to
describe its current users and give a brief summary why they need it.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have bond->mode_lock, we can remove the state_machine_lock
and use it in its place. There're no fast paths requiring the per-port
spinlocks so it should be okay to consolidate them into mode_lock.
Also move it inside the unbinding function as we don't want to expose
mode_lock outside of the specific modes.
Suggested-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>