]>
git.openfabrics.org - ~emulex/infiniband.git/log
Moritz Muehlenhoff [Sun, 25 Jan 2009 20:54:59 +0000 (21:54 +0100)]
Staging: wlan-ng: Replace WLAN_LOG_NOTICE with printk()
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moritz Muehlenhoff [Sun, 25 Jan 2009 20:54:58 +0000 (21:54 +0100)]
Staging: wlan-ng: Remove wlan_max()/wlan_min()
Replace wlan_min() with the generic min_t(), remove unused wlan_max().
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moritz Muehlenhoff [Sun, 25 Jan 2009 20:54:57 +0000 (21:54 +0100)]
Staging: wlan-ng: Remove WLAN_LOG_INFO
Replace WLAN_LOG_INFO with printk() and remove it.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moritz Muehlenhoff [Sun, 25 Jan 2009 20:54:56 +0000 (21:54 +0100)]
Staging: wlan-ng: Move URB_ASYNC_UNLINK and USB_QUEUE_BULK out of wlan_compat.h
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moritz Muehlenhoff [Sun, 25 Jan 2009 20:54:55 +0000 (21:54 +0100)]
Staging: wlan-ng: Replace BITx with the generic BIT(x)
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moritz Muehlenhoff [Wed, 21 Jan 2009 21:00:45 +0000 (22:00 +0100)]
Staging: wlan-ng: Use generic byteorder macros
This patch removes the ieee2host16(), ieee2host32(), host2ieee16()
and host2ieee32() macros and replaces them with the generic ones.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moritz Muehlenhoff [Wed, 21 Jan 2009 21:00:44 +0000 (22:00 +0100)]
Staging: wlan-ng: Remove DBFENTER/DBFEXIT macros
Remove the ugly DBFENTER/DBFEXIT macros, which are only inserted to add "<---" and
"--->" at the function start/end at higher debug levels and which make the code
a lot less readable.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moritz Muehlenhoff [Wed, 21 Jan 2009 21:00:43 +0000 (22:00 +0100)]
Staging: wlan-ng: Cleanup wlan_compat.h more
Move version identifier into p80211netdev.h and rename it to 0.3.0-staging
to differentiate from the out-of-tree version.
Also remove the unused wlan_ethconv declaration.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moritz Muehlenhoff [Wed, 21 Jan 2009 21:00:42 +0000 (22:00 +0100)]
Staging: wlan-ng: Remove stray comments in header files
The header files contain a few comments, which describe the
function of the header element. Remove them where not needed.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moritz Muehlenhoff [Wed, 21 Jan 2009 21:00:41 +0000 (22:00 +0100)]
Staging: wlan-ng: Remove use of WLAN_ADDR_LEN
Replace the driver local WLAN_ADDR_LEN constant through the kernel-wide ETH_ALEN definiton.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moritz Muehlenhoff [Wed, 21 Jan 2009 21:00:40 +0000 (22:00 +0100)]
Staging: wlan-ng: Remove use of __WLAN_ATTRIB_PACK__
Replace all ocurrances of the __WLAN_ATTRIB_PACK__ from wlan_compat.h
by __attribute__((packed)) and remove it afterwards.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Mon, 2 Mar 2009 10:30:16 +0000 (12:30 +0200)]
Staging: w35und: remove gl_80211.h header
The gl_80211.h header file contains only two definitions that are actually
used. Move them to mds_s.h and remove the otherwise unused file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Mon, 2 Mar 2009 10:19:57 +0000 (12:19 +0200)]
Staging: w35und: remove ds_tkip.h header
The ds_tkip.h header file contains declarations of a function that is not
actually defined anywhere.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@ucw.cz>
Pekka Enberg [Mon, 2 Mar 2009 10:19:56 +0000 (12:19 +0200)]
Staging: w35und: remove unused bssdscpt.h header
The bssdscpt.h header file contains definitions that are not actually used for
anything.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Mon, 12 Jan 2009 16:03:39 +0000 (18:03 +0200)]
Staging: w35und: Remove MTO_FUNC_INPUT macro obfuscation
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Mon, 12 Jan 2009 16:02:47 +0000 (18:02 +0200)]
Staging: w35und: remove hw_data_t typedef
As this typedef is used everywhere in the driver, remove it in a separate
patch.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Thu, 8 Jan 2009 16:32:14 +0000 (18:32 +0200)]
Staging: w35und: typedef removal
This patch removes some typedefs from the driver code. I also removed some
unused structs I spotted while removing the typedefs.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Thu, 8 Jan 2009 09:31:59 +0000 (11:31 +0200)]
Staging: w35und: kill WBDEBUG and remove common.h header file
The only remaining thing in common.h header file is the WBDEBUG() macro which
is unconditionally defined as printk(). Kill the macro and remove the header
file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Thu, 8 Jan 2009 09:31:28 +0000 (11:31 +0200)]
Staging: w35und: remove useless macro from common.h
The DebugUsbdStatusInformation macro doesn't do anything useful so remove the
definition and the two users of it from driver code.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Thu, 8 Jan 2009 09:56:53 +0000 (11:56 +0200)]
Staging: w35und: convert code to use ETH_ALEN
As suggested by Harvey Harrison, convert driver to use ETH_ALEN and kill a
private macro from common.h that is used for the same thing.
Acked-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Wed, 7 Jan 2009 15:33:45 +0000 (17:33 +0200)]
Staging: w35und: unify mto.h and mto_f.h header files
No need to keep function definitions separate from the rest so unify mto.h and
mto_f.h header files.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Wed, 7 Jan 2009 15:33:18 +0000 (17:33 +0200)]
Staging: w35und: remove crazy commented out includes
I have no idea why the driver would want to include OpenGL headers in the first
place but lets just remove the crazy includes.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Wed, 7 Jan 2009 15:32:58 +0000 (17:32 +0200)]
Staging: w35und: remove unnecessary os_common.h header file
Convert code to include sysdef.h directly and remove unnecessary os_common.h
header file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Wed, 7 Jan 2009 15:32:41 +0000 (17:32 +0200)]
Staging: w35und: remove unused header files
The header files are not included anywhere so we can just remove them.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andre Haupt [Mon, 19 Jan 2009 11:00:20 +0000 (12:00 +0100)]
Staging: asus_oled: do not use assignment in if condition
This fixes some errors reported by checkpatch.pl
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andre Haupt [Mon, 19 Jan 2009 11:00:19 +0000 (12:00 +0100)]
Staging: asus_oled: fix various checkpatch.pl issues regarding missing or obsolete spaces
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andre Haupt [Mon, 19 Jan 2009 11:00:18 +0000 (12:00 +0100)]
Staging: asus_oled: trailing statements should be on next line
fix the following error reported by checkpatch.pl
ERROR: trailing statements should be on next line
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andre Haupt [Mon, 19 Jan 2009 11:00:17 +0000 (12:00 +0100)]
Staging: asus_oled: do not initialise statics to 0 or NULL
fix the following error reported by checkpatch.pl
ERROR: do not initialise statics to 0 or NULL
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andre Haupt [Mon, 19 Jan 2009 11:00:16 +0000 (12:00 +0100)]
Staging: asus_oled: fix sparse warnings about using plain integer as NULL pointer
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Fri, 20 Mar 2009 12:09:04 +0000 (17:39 +0530)]
Staging: sxg: Add support to download the firmware using request_firmware()
Add support for downloading the firmware using kernel-builtin mechanism.
This will remove the need for the firmware files in the driver source code.
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Fri, 20 Mar 2009 12:07:32 +0000 (17:37 +0530)]
Staging: sxg: Add watchdog timer for managing Link states for SXG driver
Add a watchdog timer to take care of link change notifications.
Link changes would now be handled asynchronously as they involve large delays.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Fri, 20 Mar 2009 12:06:44 +0000 (17:36 +0530)]
Staging: sxg: Fix a warning dump emitted by rtnl_watchdog during LTP tests
Fix a softlock warning message thrown up by the rtnl_timer.
This was observed during the LTP tests (interface up/down test)
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Fri, 20 Mar 2009 12:05:58 +0000 (17:35 +0530)]
Staging: sxg: Read the correct MAC address from the card for Rev B cards
Read the correct MAC address from EEPROM/Flash.
Without this fix, all the interfaces were using the same MAC address.
This works on Rev B firmware.
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Fri, 20 Mar 2009 12:05:12 +0000 (17:35 +0530)]
Staging: sxg: Fix interface bug not working after open is called second time.
Fix the problem of the interface not working after a sequence of up-down-up
events. The problem was observed only on systems where the card was using MSI-X
interrupts. On the second time open, the driver did not request MSI-X vector
but was trying to use normal interrupts.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 16 Mar 2009 12:34:14 +0000 (08:34 -0400)]
Staging: sxg: Fix the module in Kconfig file for Sahara SXG driver
* Update the module name in Kconfig help section.
This is a classic case of documentation keeping out of pace with
development
And this was overlooked by me ages ago when we had fixed the Makefile for
sxg_ethtool to compile.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Tue, 24 Feb 2009 12:39:34 +0000 (18:09 +0530)]
Staging: sxg: Fix memory leak caused by double allocation of rings
* The receive rings were getting allocated twice. Once at probe time
and once at open time. This leaked huge amounts of memory.
Fix this leak and now allocation is done only once.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Tue, 24 Feb 2009 12:37:59 +0000 (18:07 +0530)]
Staging: sxg: Add checksum control option through ethtool interface
* This patch adds support for controling checksum feature using the ethtool
interface.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Wed, 18 Feb 2009 13:24:59 +0000 (18:54 +0530)]
Staging: sxg: Remove unused Rev A microcode files
Remove the deprecated microcode which was for Rev A.
Now on the driver will use Rev B microcode only.
Signed-off-by: Michael Miles <mmiles@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Wed, 18 Feb 2009 13:24:14 +0000 (18:54 +0530)]
Staging: sxg: Add Rev B support in the Sahara SXG driver
This patch makes the Sahara SXG driver use Rev B firmware instead of Rev A.
The firmware version is 1.71
Signed-off-by: Michael Miles <mmiles@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Wed, 18 Feb 2009 13:23:04 +0000 (18:53 +0530)]
Staging: sxg: Add firmware files for Rev B card
This patch adds the new firmware files required by Rev B cards.
Signed-off-by: Michael Miles <mmiles@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Wed, 18 Feb 2009 13:22:18 +0000 (18:52 +0530)]
Staging: sxg: Fix memory leak in case of allocation failure
* Fix a memory leak if allocation of skb fails in sxg_fill_descriptor_block.
In sxg_fill_descriptor_block(), if allocation of skb failed in loop,
we just came out shouting. This rollbacks all the successful operation
before skb allocation fails and then returns.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Wed, 18 Feb 2009 13:21:29 +0000 (18:51 +0530)]
Staging: sxg: Add Checksum Offload support for Sahara SXG driver
* This patch adds support for offloading checksum to hardware.
IP checksum have been tested for IPv4 and IPv6.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Wed, 11 Feb 2009 21:22:56 +0000 (13:22 -0800)]
Staging: sxg: fix napi interface build
Fix staging/sxg napi interface calls:
drivers/staging/sxg/sxg.c:1271: error: implicit declaration of function 'netif_rx_schedule_prep'
linux-next-
20090209 /drivers/staging/sxg/sxg.c:1272: error: implicit declaration of function '__netif_rx_schedule'
drivers/staging/sxg/sxg.c:1325: error: implicit declaration of function 'netif_rx_complete'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Fri, 6 Feb 2009 14:02:28 +0000 (19:32 +0530)]
Staging: sxg: Make SXG driver use MSI-X interrupts if possible
Make Sahara SXG driver use MSI-X interrupts instead of line based interrupts
if possible. In case of problems in getting MSI-X vectors or MSI-X not being
supported, driver will fall back to use previous line based interrupts.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Fri, 6 Feb 2009 14:01:40 +0000 (19:31 +0530)]
Staging: sxg: Removed unnecessary checks while taking Transmit Locks
Fix the locking issue of locks in transmit code path.
There was an unnecessary check for interrupt context in transmit code path.
Removed that.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Fri, 6 Feb 2009 14:00:40 +0000 (19:30 +0530)]
Staging: sxg: Add Jumbo frames support to Sahara SXG Driver
This patch adds Jumbo frame support to Sahara's SXG Driver.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Fri, 30 Jan 2009 14:50:19 +0000 (20:20 +0530)]
Staging: sxg: Cleanup the SXG driver of unused space and functions
Miscellaneous cleanups.
* Removed unwanted spaces/lines.
* Removed unused functions.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Fri, 30 Jan 2009 14:49:03 +0000 (20:19 +0530)]
Staging: sxg: Add NAPI feature to Sahara SXG Driver
* Add NAPI support for SXG driver for Alacritech's 10Gbe products.
The driver will now work in NAPI mode by default.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Wed, 28 Jan 2009 01:38:11 +0000 (07:08 +0530)]
Staging: sxg: Add multicast support for Sahara SXG driver
* Add multicast support for SXG driver for Alacritech's 10Gbe products.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: Michael Miles <mmiles@alacritech.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 21 Jan 2009 16:17:45 +0000 (08:17 -0800)]
Staging: sxg: fix build warnings in sxg.c
This compiles out some functions that are not being used to keep the
build clean so that we can see the "real" warnings and errors.
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 21 Jan 2009 16:15:58 +0000 (08:15 -0800)]
Staging: sxg: fix build warnings in downloadB firmware files
These variables are never used, so #ifdef them away.
This should probably be fixed up properly from someone who knows why we
are even including these files in the first place, when they do not seem
to be needed at all.
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 21 Jan 2009 16:14:38 +0000 (08:14 -0800)]
Staging: sxg: remove firmware files from sgx_ethtool.c
They are not needed here and only cause build warnings and bloat the
object file.
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 21 Jan 2009 16:12:10 +0000 (08:12 -0800)]
Staging: sxg: fix build warnings in sxg_ethtool
This fixes some build problems with the ethtool support recently added
for the sxg driver.
This is a very good example of why you need to check the build for
warnings and then fix them...
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 19 Jan 2009 14:59:59 +0000 (20:29 +0530)]
Staging: sxg: Fix to load card on low memory machines
* Fix problem of crash on 50MB machine.
* Fixed dma_addr_t bug, which resolves issues on x86_32 bit machines.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 19 Jan 2009 14:58:13 +0000 (20:28 +0530)]
Staging: sxg: Firmware updates
* Add new firmware and remove all firmware file.
* Add a switch to load either debug or free firmware.
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 19 Jan 2009 14:57:17 +0000 (20:27 +0530)]
Staging: sxg: Add Ethtool functionality enhancement and misc cleanups
Misc. cleanups in the driver.
* Remove debugging code and variables.
* Fix compile time warnings.
* Remove debugging comments.
* Start cleanup of sxg_stats structure. This structure will eventually become
very small
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 19 Jan 2009 14:54:30 +0000 (20:24 +0530)]
Staging: sxg: Locking related changes. Fix locking levels
* Fix locking related issues like taking locks at right level.
* Convert some variables to atomic, to prevent taking them while
incrementing or decrementing them.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 19 Jan 2009 14:53:22 +0000 (20:23 +0530)]
Staging: sxg: SXG SGL related cleanup in data structures and code
* Cleanup in allocation of SXG_SGLs.
* Locking issues related to SglQLock.
* XmtCmd and XmtZeroLock consistency fixes.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 19 Jan 2009 14:52:34 +0000 (20:22 +0530)]
Staging: sxg: Ethtool framework and Receive code path changes
* Add Ethtool framework to driver
* Makefile changes to fix build redundancy.
* Fix ups to error code paths in receieve buffer allocation as well as receive code path.
* Read MAC address from FLASH/EEPROM
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 5 Jan 2009 15:48:04 +0000 (21:18 +0530)]
Staging: sxg: Receive code and data structure cleanups
* Cleanup in recevive buffer structure
* Drop receive data buffer as its not needed with use of skbs
* Fix error code paths in receive skb failures
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 5 Jan 2009 15:46:56 +0000 (21:16 +0530)]
Staging: sxg: Indentation fixes - mostly 80 char lines
Fix up the indentation to Linux style. There was some indentation which was
not as per Linux style specially related to 80 char lines.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 5 Jan 2009 15:45:29 +0000 (21:15 +0530)]
Staging: sxg: Commenting style fixes - Pending work
This patch cleans up the comment. Converts the comments to C89 style.
Fixes comment related TODO item.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 5 Jan 2009 15:44:34 +0000 (21:14 +0530)]
Staging: sxg: Typedef removal - pending work
This patch removes all typedefs in the code. These were the typedefs
which are still present in driver in staging tree after the cleanup patches.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mithlesh Thukral [Mon, 5 Jan 2009 15:43:23 +0000 (21:13 +0530)]
Staging: sxg: New SXG_SGL design and MAC Header changes
* This patch introduces the new SXG_SGL design.
* Related changes to sxg_scatter_gather structure.
* Introduced PSXG_X64_SGL changes which are x64 friendly
* Setting the MAC HEADER pointer properly in skb before giving to higher
layers.
Signed-off-by: Michael Miles <mmiles@alacritech.com>
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 27 Feb 2009 00:21:46 +0000 (16:21 -0800)]
Staging: slicoss: slichw.h cleanup
Lots of spaces->tabs cleanups for slichw.h
It's much more sane and "Linux-like" now.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 23:46:06 +0000 (15:46 -0800)]
Staging: slicoss: delete slicdbg.h
Move the ASSERT macro into slicoss.c as that's all that is currently
being used.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 23:37:08 +0000 (15:37 -0800)]
Staging: slicoss: remove ASSERTMSG macro
No one uses it, so drop it.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 23:32:42 +0000 (15:32 -0800)]
Staging: slicoss: remove DBG_ERROR macro
Use the dev_err() call instead, it is the standard and provides much
more information.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 22:56:25 +0000 (14:56 -0800)]
Staging: slicoss: remove SLICLEVEL and SLIC_DISPLAY macros
They aren't needed or used anymore.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 22:52:19 +0000 (14:52 -0800)]
Staging: slicoss: remove SLIC_ETHTOOL_SUPPORT
It was always enabled, so just always use it.
Cleaned up the ioctl code a bit as well to make it more readable.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 22:43:03 +0000 (14:43 -0800)]
Staging: slicoss: remove DBG_MSG
It's not being used for anything, so delete it and all instances of it.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 22:13:26 +0000 (14:13 -0800)]
Staging: slicoss: remove VALID_ADDRESS macro
It's quite wierd, and doesn't even do anything on x86_64, so just delete
it.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 22:09:38 +0000 (14:09 -0800)]
Staging: slicoss: remove SLIC_PING_TIMER_ENABLED
It was always enabled, so just enable it properly.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 22:07:57 +0000 (14:07 -0800)]
Staging: slicoss: remove LINUX_FREES_ADAPTER_RESOURCES
It was always enabled, so just enable it and take out the one place it
was being used.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 22:06:08 +0000 (14:06 -0800)]
Staging: slicoss: remove SLIC_POWER_MANAGEMENT_ENABLED
It was always disabled, so just remove it and the 2 lines of
code it was protecting.
Also remove SLIC_POWER_MANAGEMENT which was also disabled, yet
was never used.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 22:03:54 +0000 (14:03 -0800)]
Staging: slicoss: add proper KERN_DEBUG to 2 printks
Added bonus is this fixes a compiler warning on 4.3.3
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 22:01:22 +0000 (14:01 -0800)]
Staging: slicoss: remove SLIC_GET_STATS_ENABLED
It was always enabled, so just turn on the code that was being always
enabled, and remove the #define.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 21:59:12 +0000 (13:59 -0800)]
Staging: slicoss: delete slicinc.h
Putting static function prototypes in a .h file doesn't make much sense.
Move the ones that we need into the .c file and delete the rest.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 02:41:13 +0000 (18:41 -0800)]
Staging: slicoss: remove SLIC_GET_STATS_TIMER_ENABLED
SLIC_GET_STATS_TIMER_ENABLED was never defined, so remove the code that
was bound by it.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 02:37:53 +0000 (18:37 -0800)]
Staging: slicoss: clean up SLIC_DUMP_ENABLED
As SLIC_DUMP_ENABLED was disabled, remove the code that it was keeping
from being built as it was not ever used. This removed a lot.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 02:24:19 +0000 (18:24 -0800)]
Staging: slicoss: delete slicbuild.h
It was just duplicating the same #defines already in the .c file
and it wasn't even being #included in any file.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 02:20:24 +0000 (18:20 -0800)]
Staging: slicoss: remove unused #defines
There are a number of "config" defines that do nothing, remove them.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 02:11:24 +0000 (18:11 -0800)]
Staging: slicoss: remove slic_os.h
It's no longer needed, and empty, so remove it.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 02:10:25 +0000 (18:10 -0800)]
Staging: slicoss: remove WRITE_REG wrapper
It's not needed, so just call the function instead of using a define.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 01:43:28 +0000 (17:43 -0800)]
Staging: slicoss: remove WRITE_REG64 wrapper
It's not needed, so just call the function instead of using a define.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 01:29:34 +0000 (17:29 -0800)]
Staging: slicoss: remove DEBUG_REGISTER_TRACE
It's not ever defined, so remove it from the code base.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 01:28:05 +0000 (17:28 -0800)]
Staging: slicoss: remove jiffies macros
Use the ones built into the kernel, don't reinvent the wheel.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 26 Feb 2009 01:16:44 +0000 (17:16 -0800)]
Staging: slicoss: remove TRUE/FALSE usage
Don't use TRUE and FALSE, we have proper boolean types in the kernel.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lior Dotan [Wed, 11 Feb 2009 11:35:10 +0000 (13:35 +0200)]
Staging: SLICOSS: use gfp_kernel where possible
Use GFP_KERNEL instead of GFP_ATOMIC where possible.
Signed_off-by: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lior Dotan [Wed, 11 Feb 2009 10:18:21 +0000 (12:18 +0200)]
Staging: SLICOSS: free resources on entry_probe error path
Call pci_disable_device() and free_netdev() if slic_entry_probe fails.
Signed_off-by: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lior Dotan [Fri, 30 Jan 2009 07:51:49 +0000 (09:51 +0200)]
Staging: slicoss: add binary firmware to firmware directory
Adds the firmware to the firmware directory in ihex format so it can be
installed when doing make firmware_install.
Also update the firmware location in the driver code so it can locate
the files in the right place.
This should conclude the move to request_firmware().
Signed-off-by: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lior Dotan [Mon, 26 Jan 2009 09:28:40 +0000 (11:28 +0200)]
Staging: SLICOSS: remove the static firmware header files
Remove the static headers with the firmware code, they are no longer needed.
Signed-off-by: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lior Dotan [Thu, 22 Jan 2009 07:38:15 +0000 (09:38 +0200)]
Staging: slicoss: use request_firmware
This patch uses request_firmware() to download the firmware to the card.
Signed-off-by: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Linus Torvalds [Fri, 3 Apr 2009 18:10:33 +0000 (11:10 -0700)]
Merge branch 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext3: Add replace-on-rename hueristics for data=writeback mode
ext3: Add replace-on-truncate hueristics for data=writeback mode
ext3: Use WRITE_SYNC for commits which are caused by fsync()
block_write_full_page: Use synchronous writes for WBC_SYNC_ALL writebacks
Linus Torvalds [Fri, 3 Apr 2009 17:39:20 +0000 (10:39 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (32 commits)
regulator: twl4030 VAUX3 supports 3.0V
regulator: Support disabling of unused regulators by machines
regulator: Don't increment use_count for boot_on regulators
twl4030-regulator: expose VPLL2
regulator: refcount fixes
regulator: Don't warn if we failed to get a regulator
regulator: Allow boot_on regulators to be disabled by clients
regulator: Implement list_voltage for WM835x LDOs and DCDCs
twl4030-regulator: list more VAUX4 voltages
regulator: Don't warn on omitted voltage constraints
regulator: Implement list_voltage() for WM8400 DCDCs and LDOs
MMC: regulator utilities
regulator: twl4030 voltage enumeration (v2)
regulator: twl4030 regulators
regulator: get_status() grows kerneldoc
regulator: enumerate voltages (v2)
regulator: Fix get_mode() for WM835x DCDCs
regulator: Allow regulators to set the initial operating mode
regulator: Suggest use of datasheet supply or pin names for consumers
regulator: email - update email address and regulator webpage.
...
Linus Torvalds [Fri, 3 Apr 2009 17:36:57 +0000 (10:36 -0700)]
Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
intel-iommu: Fix address wrap on 32-bit kernel.
intel-iommu: Enable DMAR on 32-bit kernel.
intel-iommu: fix PCI device detach from virtual machine
intel-iommu: VT-d page table to support snooping control bit
iommu: Add domain_has_cap iommu_ops
intel-iommu: Snooping control support
Fixed trivial conflicts in arch/x86/Kconfig and drivers/pci/intel-iommu.c
Linus Torvalds [Fri, 3 Apr 2009 17:07:43 +0000 (10:07 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-fscache
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-fscache: (41 commits)
NFS: Add mount options to enable local caching on NFS
NFS: Display local caching state
NFS: Store pages from an NFS inode into a local cache
NFS: Read pages from FS-Cache into an NFS inode
NFS: nfs_readpage_async() needs to be accessible as a fallback for local caching
NFS: Add read context retention for FS-Cache to call back with
NFS: FS-Cache page management
NFS: Add some new I/O counters for FS-Cache doing things for NFS
NFS: Invalidate FsCache page flags when cache removed
NFS: Use local disk inode cache
NFS: Define and create inode-level cache objects
NFS: Define and create superblock-level objects
NFS: Define and create server-level objects
NFS: Register NFS for caching and retrieve the top-level index
NFS: Permit local filesystem caching to be enabled for NFS
NFS: Add FS-Cache option bit and debug bit
NFS: Add comment banners to some NFS functions
FS-Cache: Make kAFS use FS-Cache
CacheFiles: A cache that backs onto a mounted filesystem
CacheFiles: Export things for CacheFiles
...
Linus Torvalds [Fri, 3 Apr 2009 17:02:45 +0000 (10:02 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (36 commits)
dm: set queue ordered mode
dm: move wait queue declaration
dm: merge pushback and deferred bio lists
dm: allow uninterruptible wait for pending io
dm: merge __flush_deferred_io into caller
dm: move bio_io_error into __split_and_process_bio
dm: rename __split_bio
dm: remove unnecessary struct dm_wq_req
dm: remove unnecessary work queue context field
dm: remove unnecessary work queue type field
dm: bio list add bio_list_add_head
dm snapshot: persistent fix dtr cleanup
dm snapshot: move status to exception store
dm snapshot: move ctr parsing to exception store
dm snapshot: use DMEMIT macro for status
dm snapshot: remove dm_snap header
dm snapshot: remove dm_snap header use
dm exception store: move cow pointer
dm exception store: move chunk_fields
dm exception store: move dm_target pointer
...
Linus Torvalds [Fri, 3 Apr 2009 16:53:22 +0000 (09:53 -0700)]
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
fs: Add exofs to Kernel build
exofs: Documentation
exofs: export_operations
exofs: super_operations and file_system_type
exofs: dir_inode and directory operations
exofs: address_space_operations
exofs: symlink_inode and fast_symlink_inode operations
exofs: file and file_inode operations
exofs: Kbuild, Headers and osd utils
Linus Torvalds [Fri, 3 Apr 2009 16:52:29 +0000 (09:52 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (61 commits)
Revert "xfs: increase the maximum number of supported ACL entries"
xfs: cleanup uuid handling
xfs: remove m_attroffset
xfs: fix various typos
xfs: pagecache usage optimization
xfs: remove m_litino
xfs: kill ino64 mount option
xfs: kill mutex_t typedef
xfs: increase the maximum number of supported ACL entries
xfs: factor out code to find the longest free extent in the AG
xfs: kill VN_BAD
xfs: kill vn_atime_* helpers.
xfs: cleanup xlog_bread
xfs: cleanup xlog_recover_do_trans
xfs: remove another leftover of the old inode log item format
xfs: cleanup log unmount handling
Fix xfs debug build breakage by pushing xfs_error.h after
xfs: include header files for prototypes
xfs: make symbols static
xfs: move declaration to header file
...