Dave Airlie [Fri, 15 Jan 2010 03:22:59 +0000 (13:22 +1000)]
Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linus
* 'nouveau/for-airlied' of ../drm-nouveau-next: (44 commits)
drm/nouveau: check pushbuffer bounds in ioctl
drm/nouveau: reserve VGA area for the moment
drm/nouveau: Unset the EDID connector property when the EDID block goes away.
drm/nouveau: Fallback to analog load detection when the EDID block is invalid.
drm/nouveau: fix edid memleak in nouveau_connector
drm/nouveau: Break some long lines.
drm/nouveau: add NV18 device id to call_lvds_manufacturer_script
drm/nv50: Fix typo in PGRAPH initialisation.
drm/nouveau: less magic DCB 1.5 parsing
drm/nouveau: assume no nv04 board has a DCB table
drm/nouveau: remove PRIV0 check in nouveau_mem_close()
drm/nouveau: wait on fence after bo move if validating for another channel
drm/nouveau: trust init table registers are safe
drm/nv50: wait for pgraph to idle before unloading the context
Andrea Tacconi [Thu, 14 Jan 2010 13:52:37 +0000 (14:52 +0100)]
drm/nouveau: add NV18 device id to call_lvds_manufacturer_script
This fixes imac black screen (NV18 card)
Signed-off-by: Andrea Tacconi <tacconet@libero.it> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 14 Jan 2010 07:53:04 +0000 (17:53 +1000)]
drm/nouveau: less magic DCB 1.5 parsing
This in the very least matches the parsing of all the previously known
entries, and hopefully (at least closer to) correct for any we haven't
seen yet.
Ben Skeggs [Thu, 14 Jan 2010 05:58:10 +0000 (15:58 +1000)]
drm/nouveau: assume no nv04 board has a DCB table
There's a report of a TNT2 where the DCB table pointer is *not* NULL
(it contains a part of a VBIOS data string), and we assume this means
a DCB table is present, causing all kinds of hilarity.
Ben Skeggs [Tue, 12 Jan 2010 05:28:19 +0000 (15:28 +1000)]
drm/nouveau: wait on fence after bo move if validating for another channel
Not an ideal solution, but it'll do for the moment for correctness. We
need to come up with a nicer way to manage inter-channel sync, the hw
is unfortunately a little lacking in this area.
Should fix some resume corruption, as well as corruption that may be seen
while under memory pressure.
Ben Skeggs [Tue, 12 Jan 2010 03:02:19 +0000 (13:02 +1000)]
drm/nouveau: trust init table registers are safe
Apparently the original reason for checking this was there were known
register accesses that caused hangs on some chipsets. This was more
than likely because of incorrect parsing of previous opcodes, and I
hardly think aborting a script half way through is going to be any
better (in fact, we have had bug reports where this has been the cause
of s/r failures among other things).
This patch (which has been in Fedora 12 for a long time now) removes
all checking for known register ranges, and just leaves the check to
ensure the access is within the mapped aperture to avoid an oops.
Thomas Hellstrom [Wed, 13 Jan 2010 21:28:43 +0000 (22:28 +0100)]
drm/vmwgfx: Implement basic pm operations.
Currently we really only support S3, since the device doesn't support
saving of the 3D state.
On S3/S4, move all buffer objects to swappable memory and take down
GMR bindings. We need to do that from a PM notifier since we can't
do persistant memory allocations from the standard PM callbacks.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Thomas Hellstrom [Wed, 13 Jan 2010 21:28:40 +0000 (22:28 +0100)]
drm/ttm: Add a swap_notify callback.
This is needed for a bugfix in the vmwgfx driver.
Drivers may have GPU bindings on buffers that core TTM is not aware of,
and TTM may view those buffers as ordinary system memory buffers.
Add a notifier to such drivers when TTM is about to move the buffer
contents out to swappable memory. The driver must then release any
private GPU bindings on those buffers.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Thomas Hellstrom [Wed, 13 Jan 2010 21:28:38 +0000 (22:28 +0100)]
drm/vmwgfx: Make fence sequences continous across a VT switch.
A vt switch in stealth mode would take down the FIFO, and re-
initialize fence sequence numbers. This patch
saves the current state of the fence sequence when the FIFO is
disabled.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 13 Jan 2010 14:16:38 +0000 (15:16 +0100)]
drm/radeon/kms: Use radeon_agp_disable when disabling AGP
Use same common function to disable agp so we replace the GART
callback by the proper one when we do so. This fix oops if
radeon_agp_init report failure.
This patch also move radeon_agp_init out of *_mc_init for r600
& rv770 so that we can have a similar behavior than for previous
hw, ie if agp_init fails it will fallback to GPU GART and disable
AGP.
Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 13 Jan 2010 14:16:39 +0000 (15:16 +0100)]
drm/radeon/kms: Disable AGP is aperture size < 32M
radeon KMS need a GART of at least 32M to properly work. This patch
check the AGP aperture size and disable if it's less than 32M. Note
than unlike non KMS path we don't staticaly allocate AGP memory so
we are not wasting memory not used by graphic processing.
Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 13 Jan 2010 09:29:27 +0000 (10:29 +0100)]
drm/radeon/kms: Fix r600 blit cleanup path
r600 blit cleanup path need to check if a bo was allocated before
trying to free or unpin it. This patch add this check and avoid
oops when the initialization on r6xx or r7xx hw fails.
Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 13 Jan 2010 11:32:36 +0000 (12:32 +0100)]
drm/radeon/kms: Do not unpin buffer in fb destruction
It's not necessary to unpin buffer in fb destruction. pin/unpin
need to be balanced and we don't pin in fb creation. We pin when
an fb is associated to a crtc and unpin when the fb is disassociated
from the crtc.
Note:
Maybe we should take reference on fb in set_base callback so fb
doesn't disappear until it's unbind from ctrc.
Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
It appears that attempting AUXCH DDC breaks the subsequent attempt
to do DDC over the i2c lines, so use the sink type to determine
if we should be doing AUXCH or i2c DDC.
This fixes my DVI monitor plugged into DP->DVI convertor.
Dave Airlie [Wed, 13 Jan 2010 06:17:38 +0000 (16:17 +1000)]
Merge remote branch 'korg/drm-radeon-next' into drm-linus
* korg/drm-radeon-next
drm/radeon/kms: only evict to GTT if CP is ready
drm/radeon/kms: Fix crash getting TV info with no BIOS.
drm/radeon/kms/rv100: reject modes > 135 Mhz on DVI (v2)
drm/radeon/kms/r6xx+: make irq handler less verbose
drm/radeon/kms: fix up LVDS handling on macs (v2)
Alex Deucher [Tue, 12 Jan 2010 16:16:57 +0000 (11:16 -0500)]
drm/radeon/kms: fix up LVDS handling on macs (v2)
Based on radeonfb code and recent ddx fix.
v2: minor formatting fix from Michel Dänzer
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Tested-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 11 Jan 2010 04:43:16 +0000 (14:43 +1000)]
Merge branch 'for-airlied' of /ssd/git/drm-nouveau-next into drm-linus
* 'for-airlied' of /ssd/git/drm-nouveau-next: (28 commits)
drm/nv04: Fix set_operation software method.
drm/nouveau: initialise DMA tracking parameters earlier
drm/nouveau: use dma.max rather than pushbuf size for checking GET validity
drm/nv04: differentiate between nv04/nv05
drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence
drm/nv50: prevent a possible ctxprog hang
drm/nouveau: have ttm's fault handler called directly
drm/nv50: restore correct cache1 get/put address on fifoctx load
drm/nouveau: create function for "dealing" with gpu lockup
drm/nouveau: remove unused nouveau_channel_idle() function
drm/nouveau: fix handling of fbcon colours in 8bpp
drm/nv04: Context switching fixes.
drm/nouveau: Use the software object for fencing.
drm/nouveau: Allocate a per-channel instance of NV_SW.
drm/nv50: make the blocksize depend on vram size
drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN
drm/nouveau: Don't skip card take down on nv0x.
drm/nouveau: Implement nv42-nv43 TV load detection.
drm/nouveau: Clean up the nv17-nv4x load detection code a bit.
drm/nv50: fix fillrect color
...
Dave Airlie [Mon, 11 Jan 2010 04:42:58 +0000 (14:42 +1000)]
Merge remote branch 'korg/drm-radeon-next' into drm-linus
* korg/drm-radeon-next:
drm/radeon/kms: add additional safe regs for r4xx/rs6xx and r5xx
drm/radeon/kms: Don't try to enable IRQ if we have no handler installed
drm: Avoid calling vblank function is vblank wasn't initialized
drm/radeon: mkregtable.c: close a file before exit
drm/radeon/kms: Make sure we release AGP device if we acquired it
drm/radeon/kms: Schedule host path read cache flush through the ring V2
drm/radeon/kms: Workaround RV410/R420 CP errata (V3)
drm/radeon/kms: detect sideport memory on IGP chips
drm/radeon: fix a couple of array index errors
drm/radeon/kms: add support for eDP (embedded DisplayPort)
drm: Add eDP connector type
drm/radeon/kms: pull in the latest upstream ObjectID.h changes
drm/radeon/kms: whitespace changes to ObjectID.h
drm/radeon/kms: fix typo in atom connector type handling
Luca Barbieri [Wed, 6 Jan 2010 03:02:45 +0000 (04:02 +0100)]
drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence
Currently Nouveau will unvalidate all buffers if it is forced to wait on
one, and then start revalidating from the beginning. While doing so, it
destroys the operation fence, causing nouveau_fence_emit to crash.
This patch fixes this bug by taking the fence object out of validate_op
and creating it just before emit. The fence pointer is initialized to 0
and unref'ed unconditionally.
In addition to fixing the bug, this prevents its reintroduction and
simplifies the code.
Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 6 Jan 2010 02:00:02 +0000 (12:00 +1000)]
drm/nv50: prevent a possible ctxprog hang
The below is mainly an educated guess at what's going on, docs would
sure be handy... NVIDIA? :P
It appears it's possible for a ctxprog to run even while a GPU exception
is pending. The GF8 and up ctxprogs appear to have a small snippet of
code which detects this, and stalls the ctxprog until it's been handled,
which essentially looks like:
if (r2 & 0x00008000) {
r0 |= 0x80000000;
while (r0 & 0x80000000) {}
}
I don't know of any way that flag would get cleared unless the driver
intervenes (and indeed, in the cases I've seen the hang, nothing steps
in to automagically clear it for us). This patch causes the driver to
clear the flag during the PGRAPH IRQ handler.
Francisco Jerez [Sat, 26 Dec 2009 01:09:36 +0000 (02:09 +0100)]
drm/nouveau: Use the software object for fencing.
This should avoid a race condition on nv0x, if we're doing it with
actual PGRAPH objects and a there's a fence within the FIFO DMA fetch
area when a context switch kicks in.
In that case we get an ILLEGAL_MTHD interrupt as expected, but the
values in PGRAPH_TRAPPED_ADDR aren't calculated correctly and they're
almost useless (e.g. you can see ILLEGAL_MTHDs for the now inactive
channel, with a wrong offset/data pair).
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Francisco Jerez [Sat, 26 Dec 2009 01:42:45 +0000 (02:42 +0100)]
drm/nouveau: Allocate a per-channel instance of NV_SW.
It will be useful for various synchronization purposes, mostly stolen
from "[PATCH] drm/nv50: synchronize user channel after buffer object
move on kernel channel" by Maarten Maathuis.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Francisco Jerez [Wed, 16 Dec 2009 11:27:11 +0000 (12:27 +0100)]
drm/i2c/ch7006: Drop build time dependency to nouveau.
This partially reverts e4b41066, as this driver is intended to be
useful with any KMS driver for suitable hardware. The missing build
dependency that commit workarounded was DRM_KMS_HELPER.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Francisco Jerez [Fri, 11 Dec 2009 15:51:09 +0000 (16:51 +0100)]
drm/nouveau: Make the MM aware of pre-G80 tiling.
This commit has also the following 3 bugfix commits squashed into it from
the nouveau git tree:
drm/nouveau: Fix up the tiling alignment restrictions for nv1x.
drm/nouveau: Fix up the nv2x tiling alignment restrictions.
drm/nv50: fix align typo for g9x
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
David John [Thu, 31 Dec 2009 06:30:46 +0000 (12:00 +0530)]
drm: Keep disabled outputs disabled after suspend / resume
With the current DRM code, an output that has been powered off
from userspace will automatically power back on when resuming
from suspend. This patch fixes this behaviour.
Tested only with the Intel i915 driver on an Intel GM45 Express
chipset.
Signed-off-by: David John <davidjon@xenontk.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
Luca Barbieri [Wed, 6 Jan 2010 03:02:45 +0000 (04:02 +0100)]
drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence
Currently Nouveau will unvalidate all buffers if it is forced to wait on
one, and then start revalidating from the beginning. While doing so, it
destroys the operation fence, causing nouveau_fence_emit to crash.
This patch fixes this bug by taking the fence object out of validate_op
and creating it just before emit. The fence pointer is initialized to 0
and unref'ed unconditionally.
In addition to fixing the bug, this prevents its reintroduction and
simplifies the code.
Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 6 Jan 2010 02:00:02 +0000 (12:00 +1000)]
drm/nv50: prevent a possible ctxprog hang
The below is mainly an educated guess at what's going on, docs would
sure be handy... NVIDIA? :P
It appears it's possible for a ctxprog to run even while a GPU exception
is pending. The GF8 and up ctxprogs appear to have a small snippet of
code which detects this, and stalls the ctxprog until it's been handled,
which essentially looks like:
if (r2 & 0x00008000) {
r0 |= 0x80000000;
while (r0 & 0x80000000) {}
}
I don't know of any way that flag would get cleared unless the driver
intervenes (and indeed, in the cases I've seen the hang, nothing steps
in to automagically clear it for us). This patch causes the driver to
clear the flag during the PGRAPH IRQ handler.
Francisco Jerez [Sat, 26 Dec 2009 01:09:36 +0000 (02:09 +0100)]
drm/nouveau: Use the software object for fencing.
This should avoid a race condition on nv0x, if we're doing it with
actual PGRAPH objects and a there's a fence within the FIFO DMA fetch
area when a context switch kicks in.
In that case we get an ILLEGAL_MTHD interrupt as expected, but the
values in PGRAPH_TRAPPED_ADDR aren't calculated correctly and they're
almost useless (e.g. you can see ILLEGAL_MTHDs for the now inactive
channel, with a wrong offset/data pair).
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Francisco Jerez [Sat, 26 Dec 2009 01:42:45 +0000 (02:42 +0100)]
drm/nouveau: Allocate a per-channel instance of NV_SW.
It will be useful for various synchronization purposes, mostly stolen
from "[PATCH] drm/nv50: synchronize user channel after buffer object
move on kernel channel" by Maarten Maathuis.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Francisco Jerez [Wed, 16 Dec 2009 11:27:11 +0000 (12:27 +0100)]
drm/i2c/ch7006: Drop build time dependency to nouveau.
This partially reverts e4b41066, as this driver is intended to be
useful with any KMS driver for suitable hardware. The missing build
dependency that commit workarounded was DRM_KMS_HELPER.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Francisco Jerez [Fri, 11 Dec 2009 15:51:09 +0000 (16:51 +0100)]
drm/nouveau: Make the MM aware of pre-G80 tiling.
This commit has also the following 3 bugfix commits squashed into it from
the nouveau git tree:
drm/nouveau: Fix up the tiling alignment restrictions for nv1x.
drm/nouveau: Fix up the nv2x tiling alignment restrictions.
drm/nv50: fix align typo for g9x
Signed-off-by: Francisco Jerez <currojerez@riseup.net>