Marc Zyngier [Wed, 17 Apr 2013 19:09:09 +0000 (12:09 -0700)]
ARM: KVM: fix unbalanced get_cpu() in access_dcsw
In the very unlikely event where a guest would be foolish enough to
*read* from a write-only cache maintainance register, we end up
with preemption disabled, due to a misplaced get_cpu().
Just move the "is_write" test outside of the critical section.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1) Fix erroneous netfilter drop of SIP packets generated by some Cisco
phones, from Patrick McHardy.
2) Fix netfilter IPSET refcounting in list_set_add(), from Jozsef
Kadlecsik.
3) Fix TCP syncookies route lookup key, we don't use the same values we
would use for the usual SYN receive processing, from Dmitry Popov.
4) Fix NULL deref in bond_slave_netdev_event(), from Nikolay
Aleksandrov.
5) When bonding enslave fails, we can forget to clear the IFF_BONDING
bit, fix also from Nikolay Aleksandrov.
6) skb->csum_start is 16-bits, which is almost always just fine. But
if we reallocate the headroom of an SKB this can push the
skb->csum_start value outside of it's valid range. This can easily
happen when collapsing multiple SKBs from the retransmit queue
together.
Fix from Thomas Graf.
7) Fix NULL deref in be2net driver due to missing check of
__vlan_put_tag() return value, from Ivan Vecera.
8) tun_set_iff() returns zero instead of error code on failure, fix
from Wei Yongjun.
9) Like GARP, 802 MRP needs to hold the app->lock when adding MAD
events and queueing PDUs. Fix from David Ward.
10) Build fix, MVMDIO needs PHYLIB, from Thomas Petazzoni..
11) Fix mac80211 static with ipv6 modular build, from Cong Wang.
12) If userland specifies a path cost explicitly, do not override it
when the carrier state changes. From Stephen Hemminger.
13) mvnets calculates the TX queue to use incorrectly resulting in
garbage pointer derefs and crashes, fix from Willy Tarreau.
14) cdc_mbim does erroneous sizeof(ETH_HLEN). Fix from Bjorn Mork.
15) IP fragmentation can leak a refcount-less route out from an RCU
protected section. This results in crashes and all sorts of hard to
diagnose behavior. Fix from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
qlcnic: fix beaconing test for 82xx adapter
net: drop dst before queueing fragments
net: fec: fix regression in link change accounting
net: cdc_mbim: remove bogus sizeof()
drivers: net: ethernet: cpsw: get slave VLAN id from slave node instead of cpsw node
net: mvneta: fix improper tx queue usage in mvneta_tx()
esp4: fix error return code in esp_output()
bridge: make user modified path cost sticky
ipv6: statically link register_inet6addr_notifier()
net: mvmdio: add select PHYLIB
net/802/mrp: fix possible race condition when calling mrp_pdu_queue()
tuntap: fix error return code in tun_set_iff()
be2net: take care of __vlan_put_tag return value
can: sja1000: fix handling on dt properties on little endian systems
can: mcp251x: add missing IRQF_ONESHOT to request_threaded_irq
netfilter: nf_nat: fix race when unloading protocol modules
tcp: Reallocate headroom if it would overflow csum_start
stmmac: prevent interrupt loop with MMC RX IPC Counter
bonding: IFF_BONDING is not stripped on enslave failure
bonding: fix netdev event NULL pointer dereference
...
s390: move dummy io_remap_pfn_range() to asm/pgtable.h
Commit b4cbb197c7e7 ("vm: add vm_iomap_memory() helper function") added
a helper function wrapper around io_remap_pfn_range(), and every other
architecture defined it in <asm/pgtable.h>.
The s390 choice of <asm/io.h> may make sense, but is not very convenient
for this case, and gratuitous differences like that cause unexpected errors like this:
mm/memory.c: In function 'vm_iomap_memory':
mm/memory.c:2439:2: error: implicit declaration of function 'io_remap_pfn_range' [-Werror=implicit-function-declaration]
Glory be the kbuild test robot who noticed this, bisected it, and
reported it to the guilty parties (ie me).
o Commit 319ecf121e1da3d75dd1bde32fed255532e61797
("qlcnic: 83xx sysfs routines") introduced regression
for beaconing test while refactoring 82xx code. This patch is to
revert code to fix beaconing test for 82xx adapter.
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 16 Apr 2013 12:55:41 +0000 (12:55 +0000)]
net: drop dst before queueing fragments
Commit 4a94445c9a5c (net: Use ip_route_input_noref() in input path)
added a bug in IP defragmentation handling, as non refcounted
dst could escape an RCU protected section.
Commit 64f3b9e203bd068 (net: ip_expire() must revalidate route) fixed
the case of timeouts, but not the general problem.
Tom Parkin noticed crashes in UDP stack and provided a patch,
but further analysis permitted us to pinpoint the root cause.
Before queueing a packet into a frag list, we must drop its dst,
as this dst has limited lifetime (RCU protected)
When/if a packet is finally reassembled, we use the dst of the very
last skb, still protected by RCU and valid, as the dst of the
reassembled packet.
Use same logic in IPv6, as there is no need to hold dst references.
Reported-by: Tom Parkin <tparkin@katalix.com> Tested-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pull kvm fixes from Marcelo Tosatti:
"PPC and ARM KVM fixes"
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write
ARM: KVM: fix KVM_CAP_ARM_SET_DEVICE_ADDR reporting
kvm/ppc/e500: eliminate tlb_refs
kvm/ppc/e500: g2h_tlb1_map: clear old bit before setting new bit
kvm/ppc/e500: h2g_tlb1_rmap: esel 0 is valid
kvm/powerpc/e500mc: fix tlb invalidation on cpu migration
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes
Pull powerpc fixes from Stephen Rothwell:
"Three regresions in the PowerPC code. One from v3.7 the others from
this merge window."
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes:
powerpc: add a missing label in resume_kernel
powerpc: Fix audit crash due to save/restore PPR changes
powerpc: fix compiling CONFIG_PPC_TRANSACTIONAL_MEM when CONFIG_ALTIVEC=n
Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fix from Michal Marek:
"Fix for a missing dependency when generating scripts/mod/devicetable-offsets.h.
This dependency got introduced in v3.9-rc1."
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: generate generic headers before recursing into scripts
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Two small fixups to the Wacom driver"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: wacom - correct reported resolution for Intuos4 Wireless
Input: wacom - fix "can not retrieve extra class descriptor" for 24HDT
Various drivers end up replicating the code to mmap() their memory
buffers into user space, and our core memory remapping function may be
very flexible but it is unnecessarily complicated for the common cases
to use.
Our internal VM uses pfn's ("page frame numbers") which simplifies
things for the VM, and allows us to pass physical addresses around in a
denser and more efficient format than passing a "phys_addr_t" around,
and having to shift it up and down by the page size. But it just means
that drivers end up doing that shifting instead at the interface level.
It also means that drivers end up mucking around with internal VM things
like the vma details (vm_pgoff, vm_start/end) way more than they really
need to.
So this just exports a function to map a certain physical memory range
into user space (using a phys_addr_t based interface that is much more
natural for a driver) and hides all the complexity from the driver.
Some drivers will still end up tweaking the vm_page_prot details for
things like prefetching or cacheability etc, but that's actually
relevant to the driver, rather than caring about what the page offset of
the mapping is into the particular IO memory region.
Marc Zyngier [Fri, 12 Apr 2013 13:00:16 +0000 (14:00 +0100)]
ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write
Looks like our L_PTE_S2_RDWR definition is slightly wrong,
and is actually write only (see ARM ARM Table B3-9, Stage 2 control
of access permissions). Didn't make a difference for normal pages,
as we OR the flags together, but I'm still wondering how it worked
for Stage-2 mapped devices, such as the GIC.
Brown paper bag time, again.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
Commit 3401d54696f9 (KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR
ioctl) added support for the KVM_CAP_ARM_SET_DEVICE_ADDR capability,
but failed to add a break in the relevant case statement, returning
the number of CPUs instead.
Luckilly enough, the CONFIG_NR_CPUS=0 patch hasn't been merged yet
(https://lkml.org/lkml/diff/2012/3/31/131/1), so the bug wasn't
noticed.
Just give it a break!
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
Lucas Stach [Tue, 16 Apr 2013 00:42:42 +0000 (00:42 +0000)]
net: fec: fix regression in link change accounting
A link-down isn't properly saved in the FEC state, so we wouldn't restart the
FEC after a repeated link-up.
Regression was introduced with commit d97e7497 "net: fec: restart the FEC when PHY speed changes"
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N [Mon, 15 Apr 2013 07:31:28 +0000 (07:31 +0000)]
drivers: net: ethernet: cpsw: get slave VLAN id from slave node instead of cpsw node
Dual EMAC slave VLAN id must be got from slave node instead of cpsw node as
VLAN id for each slave will be different.
Reported-by: Mark Jackson <mpfj-list@mimc.co.uk> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: mvneta: fix improper tx queue usage in mvneta_tx()
mvneta_tx() was using a static tx queue number causing crashes as
soon as a little bit of traffic was sent via the interface, because
it is normally expected that the same queue should be used as in
dev_queue_xmit().
As suggested by Ben Hutchings, let's use skb_get_queue_mapping() to
get the proper Tx queue number, and use alloc_etherdev_mqs() instead
of alloc_etherdev_mq() to create the queues.
Both my Mirabox and my OpenBlocks AX3 used to crash without this patch
and don't anymore with it. The issue appeared in 3.8 but became more
visible after the fix allowing GSO to be enabled.
Original work was done by Dmitri Epshtein and Thomas Petazzoni. I
just adapted it to take care of Ben's comments.
Signed-off-by: Willy Tarreau <w@1wt.eu> Cc: Dmitri Epshtein <dima@marvell.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Keep a STP port path cost value if it was set by a user.
Don't replace it with the link-speed based path cost
whenever the link goes down and comes back up.
Reported-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Hao [Tue, 9 Apr 2013 22:31:24 +0000 (22:31 +0000)]
powerpc: add a missing label in resume_kernel
A label 0 was missed in the patch a9c4e541 (powerpc/kprobe: Complete
kprobe and migrate exception frame). This will cause the kernel
branch to an undetermined address if there really has a conflict when
updating the thread flags.
Signed-off-by: Kevin Hao <haokexin@gmail.com> Cc: stable@vger.kernel.org Acked-By: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cong Wang [Sun, 14 Apr 2013 15:18:43 +0000 (23:18 +0800)]
ipv6: statically link register_inet6addr_notifier()
Tomas reported the following build error:
net/built-in.o: In function `ieee80211_unregister_hw':
(.text+0x10f0e1): undefined reference to `unregister_inet6addr_notifier'
net/built-in.o: In function `ieee80211_register_hw':
(.text+0x10f610): undefined reference to `register_inet6addr_notifier'
make: *** [vmlinux] Error 1
when built IPv6 as a module.
So we have to statically link these symbols.
Reported-by: Tomas Melin <tomas.melin@iki.fi> Cc: Tomas Melin <tomas.melin@iki.fi> Cc: "David S. Miller" <davem@davemloft.net> Cc: YOSHIFUJI Hidaki <yoshfuji@linux-ipv6.org> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set
x86/mm/cpa/selftest: Fix false positive in CPA self test
x86/mm/cpa: Convert noop to functional fix
x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metal
x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixlets"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Fix accounting on multi-threaded processes
sched/debug: Fix sd->*_idx limit range avoiding overflow
sched_clock: Prevent 64bit inatomicity on 32bit systems
sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"One fix for a hotplug locking regressions, and one fix for an oops if
you unplug the monitor at an inopportune moment on the udl device."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/fb-helper: Fix locking in drm_fb_helper_hotplug_event
udl: handle EDID failure properly.
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull one more btrfs fix from Chris Mason:
"This has a recent fix from Josef for our tree log replay code. It
fixes problems where the inode counter for the number of bytes in the
file wasn't getting updated properly during fsync replay.
The commit did get rebased this morning, but it was only to clean up
the subject line. The code hasn't changed."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: make sure nbytes are right after log replay
Merge tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fixes from Steven Rostedt:
"Namhyung Kim found and fixed a bug that can crash the kernel by simply
doing: echo 1234 | tee -a /sys/kernel/debug/tracing/set_ftrace_pid
Luckily, this can only be done by root, but still is a nasty bug."
* tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section
tracing: Fix possible NULL pointer dereferences
Add file_ns_capable() helper function for open-time capability checking
Nothing is using it yet, but this will allow us to delay the open-time
checks to use time, without breaking the normal UNIX permission
semantics where permissions are determined by the opener (and the file
descriptor can then be passed to a different process, or the process can
drop capabilities).
Nicolas Ferre [Wed, 10 Apr 2013 12:36:22 +0000 (14:36 +0200)]
watchdog: Revert the AT91RM9200_WATCHDOG dependency
Compiling the at91rm9200_wdt.c driver without at91rm9200
support was leading to several errors:
drivers/built-in.o: In function `at91_wdt_close':
at91_adc.c:(.text+0xc9fe4): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_write':
at91_adc.c:(.text+0xca004): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_shutdown':
at91_adc.c:(.text+0xca01c): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_suspend':
at91_adc.c:(.text+0xca038): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_open':
at91_adc.c:(.text+0xca0cc): undefined reference to `at91_st_base'
drivers/built-in.o:at91_adc.c:(.text+0xca2c8): more undefined references to
`at91_st_base' follow
So, reverting the modification of the "depends" Kconfig line
introduced by patch a6a1bcd37 (watchdog: at91rm9200: add DT support)
seems to be the good solution.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
vfs: Revert spurious fix to spinning prevention in prune_icache_sb
Revert commit 62a3ddef6181 ("vfs: fix spinning prevention in prune_icache_sb").
This commit doesn't look right: since we are looking at the tail of the
list (sb->s_inode_lru.prev) if we want to skip an inode, we should put
it back at the head of the list instead of the tail, otherwise we will
keep spinning on it.
Discovered when investigating why prune_icache_sb came top in perf
reports of a swapping load.
kobject: fix kset_find_obj() race with concurrent last kobject_put()
Anatol Pomozov identified a race condition that hits module unloading
and re-loading. To quote Anatol:
"This is a race codition that exists between kset_find_obj() and
kobject_put(). kset_find_obj() might return kobject that has refcount
equal to 0 if this kobject is freeing by kobject_put() in other
thread.
Here is timeline for the crash in case if kset_find_obj() searches for
an object tht nobody holds and other thread is doing kobject_put() on
the same kobject:
THREAD A (calls kset_find_obj()) THREAD B (calls kobject_put())
splin_lock()
atomic_dec_return(kobj->kref), counter gets zero here
... starts kobject cleanup ....
spin_lock() // WAIT thread A in kobj_kset_leave()
iterate over kset->list
atomic_inc(kobj->kref) (counter becomes 1)
spin_unlock()
spin_lock() // taken
// it does not know that thread A increased counter so it
remove obj from list
spin_unlock()
vfree(module) // frees module object with containing kobj
// kobj points to freed memory area!!
kobject_put(kobj) // OOPS!!!!
The race above happens because module.c tries to use kset_find_obj()
when somebody unloads module. The module.c code was introduced in
commit 6494a93d55fa"
Anatol supplied a patch specific for module.c that worked around the
problem by simply not using kset_find_obj() at all, but rather than make
a local band-aid, this just fixes kset_find_obj() to be thread-safe
using the proper model of refusing the get a new reference if the
refcount has already dropped to zero.
See examples of this proper refcount handling not only in the kref
documentation, but in various other equivalent uses of this pattern by
grepping for atomic_inc_not_zero().
[ Side note: the module race does indicate that module loading and
unloading is not properly serialized wrt sysfs information using the
module mutex. That may require further thought, but this is the
correct fix at the kobject layer regardless. ]
Thomas Petazzoni [Sat, 13 Apr 2013 06:18:56 +0000 (06:18 +0000)]
net: mvmdio: add select PHYLIB
The mvmdio driver uses the phylib API, so it should select the PHYLIB
symbol, otherwise, a build with mvmdio (but without mvneta) fails to
build with undefined symbols such as mdiobus_unregister, mdiobus_free,
etc.
The mvneta driver does not use the phylib API directly, so it does not
need to select PHYLIB. It already selects the mvmdio driver anyway.
Historically, this problem is due to the fact that the PHY handling
was originally part of mvneta, and was later moved to a separate
driver, without updating the Kconfig select statements
accordingly. And since there was no functional reason to use mvmdio
without mvneta, this case was not tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Josef Bacik [Fri, 5 Apr 2013 20:50:09 +0000 (20:50 +0000)]
Btrfs: make sure nbytes are right after log replay
While trying to track down a tree log replay bug I noticed that fsck was always
complaining about nbytes not being right for our fsynced file. That is because
the new fsync stuff doesn't wait for ordered extents to complete, so the inodes
nbytes are not necessarily updated properly when we log it. So to fix this we
need to set nbytes to whatever it is on the inode that is on disk, so when we
replay the extents we can just add the bytes that are being added as we replay
the extent. This makes it work for the case that we have the wrong nbytes or
the case that we logged everything and nbytes is actually correct. With this
I'm no longer getting nbytes errors out of btrfsck.
Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Ingo guesses this got introduced by commit 611ae8e3f520 ("x86/tlb:
enable tlb flush range support for x86") since that code started to free
unused pagetables.
On x86-32 PAE kernels, that new code has the potential to free an entire
PMD page and will clear one of the four page-directory-pointer-table
(aka pgd_t entries).
The hardware aggressively "caches" these top-level entries and invlpg
does not actually affect the CPU's copy. If we clear one we *HAVE* to
do a full TLB flush, otherwise we might continue using a freed pmd page.
(note, we do this properly on the population side in pud_populate()).
This patch tracks whenever we clear one of these entries in the 'struct
mmu_gather', and ensures that we follow up with a full tlb flush.
BTW, I disassembled and checked that:
if (tlb->fullmm == 0)
and
if (!tlb->fullmm && !tlb->need_flush_all)
generate essentially the same code, so there should be zero impact there
to the !PAE case.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Artem S Tashkinov <t.artem@mailcity.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull SCSI target fixes from Nicholas Bellinger:
"Here are remaining target-pending items for v3.9-rc7 code.
The tcm_vhost patches are more than I'd usually include in a -rc7
pull, but are changes required for v3.9 to work correctly with the
pending vhost-scsi-pci QEMU upstream series merge. (Paolo CC'ed)
Plus Asias's conversion to use vhost_virtqueue->private_data + RCU for
managing vhost-scsi endpoints has gotten alot of review + testing over
the past weeks, and MST has ACKed the full series.
Also, there is a target patch to fix a long-standing bug within
control CDB handling with Standby/Offline/Transition ALUA port access
states, that had been incorrectly rejecting the control CDBs required
for LUN scan to work during these port group states. CC'ing to
stable."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBs
tcm_vhost: Send bad target to guest when cmd fails
tcm_vhost: Add vhost_scsi_send_bad_target() helper
tcm_vhost: Fix tv_cmd leak in vhost_scsi_handle_vq
tcm_vhost: Remove double check of response
tcm_vhost: Initialize vq->last_used_idx when set endpoint
tcm_vhost: Use vq->private_data to indicate if the endpoint is setup
tcm_vhost: Use ACCESS_ONCE for vs->vs_tpg[target] access
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of ten bug fixes (and two consisting of copyright year
update and version number change) pretty much all of which involve
either a crash or a hang except the removal of the random sleep from
the qla2xxx driver (which is a coding error so bad, we want it gone
before anyone has a chance to copy it)."
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] lpfc: fix potential NULL pointer dereference in lpfc_sli4_rq_put()
[SCSI] libsas: fix handling vacant phy in sas_set_ex_phy()
[SCSI] ibmvscsi: Fix slave_configure deadlock
[SCSI] qla2xxx: Update the driver version to 8.04.00.13-k.
[SCSI] qla2xxx: Remove debug code that msleeps for random duration.
[SCSI] qla2xxx: Update copyright dates information in LICENSE.qla2xxx file.
[SCSI] qla2xxx: Fix crash during firmware dump procedure.
[SCSI] Revert "qla2xxx: Add setting of driver version string for vendor application."
[SCSI] ipr: dlpar failed when adding an adapter back
[SCSI] ipr: fix addition of abort command to HRRQ free queue
[SCSI] st: Take additional queue ref in st_probe
[SCSI] libsas: use right function to alloc smp response
[SCSI] ipr: ipr_test_msi() fails when running with msi-x enabled adapter
ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section
As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to
be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the
ftrace_pid_fops is defined when DYNAMIC_FTRACE is not.
Cc: stable@vger.kernel.org Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
David Ward [Thu, 11 Apr 2013 13:47:15 +0000 (13:47 +0000)]
net/802/mrp: fix possible race condition when calling mrp_pdu_queue()
(Adapted from a very similar change to net/802/garp.c by Cong Wang.)
mrp_pdu_queue() should ways be called with the applicant spin lock.
mrp_uninit_applicant() only holds the rtnl lock which is not enough;
a race is possible because mrp_rcv() is called in BH context:
Cc: Cong Wang <amwang@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David Ward <david.ward@ll.mit.edu> Acked-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Namhyung Kim [Thu, 11 Apr 2013 06:55:01 +0000 (15:55 +0900)]
tracing: Fix possible NULL pointer dereferences
Currently set_ftrace_pid and set_graph_function files use seq_lseek
for their fops. However seq_open() is called only for FMODE_READ in
the fops->open() so that if an user tries to seek one of those file
when she open it for writing, it sees NULL seq_file and then panic.
It can be easily reproduced with following command:
$ cd /sys/kernel/debug/tracing
$ echo 1234 | sudo tee -a set_ftrace_pid
In this example, GNU coreutils' tee opens the file with fopen(, "a")
and then the fopen() internally calls lseek().
Link: http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: stable@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
David S. Miller [Fri, 12 Apr 2013 18:29:28 +0000 (14:29 -0400)]
Merge branch 'fixes-for-3.9' of git://gitorious.org/linux-can/linux-can
Marc Kleine-Budde says:
====================
here's another fix for the v3.9 release cycle, if not too late:
Christoph Fritz fixed the device tree property handling on little endian
systems in the sja1000 device tree driver. It was Mylene Josserand who noticed
that the mcp251x spi CAN driver cannot request its interrupt anymore, as the
driver is using a threaded interrupt handler without a primary one and without
specifying IRQF_ONESHOT (which is needed since v3.5). A patch by me fixes this
problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Apr 2013 18:26:39 +0000 (14:26 -0400)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf into netfilter
Pablo Neira Ayuso says:
====================
The following patchset contains late netfilter fixes for your net
tree, they are:
* Don't drop segmented TCP packets in the SIP helper, we've got reports
from users that this was breaking communications when the SIP phone
messages are larger than the MTU, from Patrick McHardy.
* Fix refcount leak in the ipset list set, from Jozsef Kadlecsik.
* On hash set resizing, the nomatch flag was lost, thus entirely inverting
the logic of the set matching, from Jozsef Kadlecsik.
* Fix crash on NAT modules removal. Timer expiration may race with the
module cleanup exit path while deleting conntracks, from Florian
Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains a few small ASoC fixes (wm8903, wm5102, samsung-i2s,
tegra, and soc-compress) and an endian fix for NI USB-audio devices,
update for Mark's e-mail address.
No scary changes, AFAIS."
* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
MAINTAINERS: Update e-mail address
ASoC: wm5102: Correct lookup of arizona struct in SYSCLK event
ASoC: wm8903: Fix the bypass to HP/LINEOUT when no DAC or ADC is running
ALSA: usb-audio: fix endianness bug in snd_nativeinstruments_*
ASoC: tegra: Don't claim to support PCM pause and resume
ASoC: Samsung: set drvdata before adding secondary device
ASoC: Samsung: return error if drvdata is not set
ASoC: compress: Cancel delayed power down if needed
ASoC: core: Fix to check return value of snd_soc_update_bits_locked()
Thomas Gleixner [Tue, 9 Apr 2013 07:33:34 +0000 (09:33 +0200)]
kthread: Prevent unpark race which puts threads on the wrong cpu
The smpboot threads rely on the park/unpark mechanism which binds per
cpu threads on a particular core. Though the functionality is racy:
CPU0 CPU1 CPU2
unpark(T) wake_up_process(T)
clear(SHOULD_PARK) T runs
leave parkme() due to !SHOULD_PARK
bind_to(CPU2) BUG_ON(wrong CPU)
We cannot let the tasks move themself to the target CPU as one of
those tasks is actually the migration thread itself, which requires
that it starts running on the target cpu right away.
The solution to this problem is to prevent wakeups in park mode which
are not from unpark(). That way we can guarantee that the association
of the task to the target cpu is working correctly.
Add a new task state (TASK_PARKED) which prevents other wakeups and
use this state explicitly for the unpark wakeup.
Peter noticed: Also, since the task state is visible to userspace and
all the parked tasks are still in the PID space, its a good hint in ps
and friends that these tasks aren't really there for the moment.
The sched_set_stop_task() call is issued while the task is on the
runqueue of CPU1 and that confuses the hell out of the stop_task class
on that cpu. So we need the same synchronizaion before
sched_set_stop_task().
Reported-by: Dave Jones <davej@redhat.com> Reported-and-tested-by: Dave Hansen <dave@sr71.net> Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Acked-by: Peter Ziljstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: dhillf@gmail.com Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1304091635430.21884@ionos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Christoph Fritz [Thu, 11 Apr 2013 19:32:57 +0000 (21:32 +0200)]
can: sja1000: fix handling on dt properties on little endian systems
To get correct endianes on little endian cpus (like arm) while reading device
tree properties, this patch replaces of_get_property() with
of_property_read_u32(). While there use of_property_read_bool() for the
handling of the boolean "nxp,no-comparator-bypass" property.
Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
threaded irqs must provide a primary handler or set the IRQF_ONESHOT flag.
Since the mcp251x driver doesn't make use of a primary handler set the
IRQF_ONESHOT flag.
Happens when a conntrack timeout expires right after first part
of the nat cleanup has completed (bysrc hash removal), but before
part 2 has completed (re-initialization of nat area).
[ destroy callback tries to delete bysrc again ]
Patrick suggested to just remove the affected conntracks -- the
connections won't work properly anyway without nat transformation.
So, lets do that.
Reported-by: CAI Qian <caiqian@redhat.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Merge tag 'asoc-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v3.9
A few updates, more than I'd like, fixing some relatively small issues
but mostly driver specific ones. Nothing wildly exciting so if it
doesn't make v3.9 it won't be the end of the world but it'd be nice.
Boris Ostrovsky [Thu, 11 Apr 2013 17:59:52 +0000 (13:59 -0400)]
x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set
When CONFIG_DEBUG_PAGEALLOC is set page table updates made by
kernel_map_pages() are not made visible (via TLB flush)
immediately if lazy MMU is on. In environments that support lazy
MMU (e.g. Xen) this may lead to fatal page faults, for example,
when zap_pte_range() needs to allocate pages in
__tlb_remove_page() -> tlb_next_batch().
Daniel Vetter [Thu, 11 Apr 2013 14:26:55 +0000 (14:26 +0000)]
drm/fb-helper: Fix locking in drm_fb_helper_hotplug_event
Driver's and ->fill_modes functions are allowed to grab crtc mutexes
(for e.g. load detect). Hence we need to first only grab the general
kms mutex, and only in a second step grab all locks to do the
modesets.
This prevents a deadlock on my gm45 in the tv load detect code called
by drm_helper_probe_single_connector_modes.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine fixes from Vinod Koul:
"The first one fixes issue in pl330 to check for DT compatible and
the second one fixes omap-dma to start without delay"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: omap-dma: Start DMA without delay for cyclic channels
DMA: PL330: Add check if device tree compatible
Merge tag 'pm-3.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- System reboot/halt fix related to CPU offline ordering from Huacai
Chen.
- intel_pstate driver fix for a delay time computation error
occasionally crashing systems using it from Dirk Brandewie.
* tag 'pm-3.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()
cpufreq / intel_pstate: Set timer timeout correctly
Merge tag 'regmap-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap revert from Mark Brown:
"regmap: Back out work buffer fix
This reverts commit bc8ce4 (regmap: don't corrupt work buffer in
_regmap_raw_write()) since it turns out that it can cause issues when
taken in isolation from the other changes in -next that lead to its
discovery. On the basis that nobody noticed the problems for quite
some time without that subsequent work let's drop it from v3.9."
* tag 'regmap-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Back out work buffer fix
Merge tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC bug fixes from Arnd Bergmann:
"A little later during the week than the last few pull requests, since
there was very little that came in before 3.9-rc6. At least things
have calmed down again here.
Some important bug fixes that came in over the last 10 days, mostly
mvebu and imx:
- Multiple regressions on i.mx following the conversion of the clock
code, hopefully the last we are seeing of those.
- a regression in the mvebu irq handling code
- An incorrect register offset in the rewritten s3c24xx irq code.
- Two bugs in setting up the iomega_ix2_200 machine
- Turning on an extra bus clock on imx
- A MAINTAINERS file entry for Roland Stigge"
* tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm: mvebu: Fix the irq map function in SMP mode
Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller
ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
ARM i.MX6: Fix ldb_di clock selection
ARM: imx: provide twd clock lookup from device tree
ARM: imx35 Bugfix admux clock
ARM: clk-imx35: Bugfix iomux clock
ARM: mxs: Slow down the I2C clock speed
MAINTAINERS: Add maintainer for LPC32xx
ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED
Thomas Graf [Thu, 11 Apr 2013 10:57:18 +0000 (10:57 +0000)]
tcp: Reallocate headroom if it would overflow csum_start
If a TCP retransmission gets partially ACKed and collapsed multiple
times it is possible for the headroom to grow beyond 64K which will
overflow the 16bit skb->csum_start which is based on the start of
the headroom. It has been observed rarely in the wild with IPoIB due
to the 64K MTU.
Verify if the acking and collapsing resulted in a headroom exceeding
what csum_start can cover and reallocate the headroom if so.
A big thank you to Jim Foraker <foraker1@llnl.gov> and the team at
LLNL for helping out with the investigation and testing.
Reported-by: Jim Foraker <foraker1@llnl.gov> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
stmmac: prevent interrupt loop with MMC RX IPC Counter
If the DesignWare MAC is synthesised with MMC RX IPC Counter, an unmanaged
and unacknowledged interrupt is generated after some time of operation.
This patch masks the undesired interrupts.
Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: IFF_BONDING is not stripped on enslave failure
While enslaving a new device and after IFF_BONDING flag is set, in case
of failure it is not stripped from the device's priv_flags while
cleaning up, which could lead to other problems.
Cleaning at err_close because the flag is set after dev_open().
v2: no change
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 471cb5a33dcbd7c529684a2ac7ba4451414ee4a7 ("bonding: remove
usage of dev->master") a bug was introduced which causes a NULL pointer
dereference. If a bond device is in mode 6 (ALB) and a slave is added
it will dereference a NULL pointer in bond_slave_netdev_event().
This is because in bond_enslave we have bond_alb_init_slave() which
changes the MAC address of the slave and causes a NETDEV_CHANGEADDR.
Then we have in bond_slave_netdev_event():
struct slave *slave = bond_slave_get_rtnl(slave_dev);
struct bonding *bond = slave->bond;
bond_slave_get_rtnl() dereferences slave_dev->rx_handler_data which at
that time is NULL since netdev_rx_handler_register() is called later.
This is fixed by checking if slave is NULL before dereferencing it.
v2: Comment style changed.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp: incoming connections might use wrong route under synflood
There is a bug in cookie_v4_check (net/ipv4/syncookies.c):
flowi4_init_output(&fl4, 0, sk->sk_mark, RT_CONN_FLAGS(sk),
RT_SCOPE_UNIVERSE, IPPROTO_TCP,
inet_sk_flowi_flags(sk),
(opt && opt->srr) ? opt->faddr : ireq->rmt_addr,
ireq->loc_addr, th->source, th->dest);
Here we do not respect sk->sk_bound_dev_if, therefore wrong dst_entry may be
taken. This dst_entry is used by new socket (get_cookie_sock ->
tcp_v4_syn_recv_sock), so its packets may take the wrong path.
Signed-off-by: Dmitry Popov <dp@highloadlab.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We actually have to pass chip as the host_data parameter of
irq_domain_add_simple() as later on, it is used to initialize chip_data
in pca953x_gpio_irq_map(). Failing to do so is leading to a NULL pointer
dereference after calling irq_data_get_irq_chip_data() in
pca953x_irq_mask(), pca953x_irq_unmask(), pca953x_irq_bus_lock(),
pca953x_irq_bus_sync_unlock() and pca953x_irq_set_type().
Merge tag 'mvebu_fixes_for_v3.9_round3' of git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper <jason@lakedaemon.net>:
mvebu fixes for v3.9 round 3
- Kirkwood
- a couple of small fixes for the Iomega ix2-200 board (ether and led)
- mvebu
- allow GPIO button to work on Mirabox when running SMP
* tag 'mvebu_fixes_for_v3.9_round3' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: Fix the irq map function in SMP mode
Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED
Scott Wood [Wed, 6 Mar 2013 16:02:49 +0000 (16:02 +0000)]
kvm/ppc/e500: eliminate tlb_refs
Commit 523f0e5421c12610527c620b983b443f329e3a32 ("KVM: PPC: E500:
Explicitly mark shadow maps invalid") began using E500_TLB_VALID
for guest TLB1 entries, and skipping invalidations if it's not set.
However, when E500_TLB_VALID was set for such entries, it was on a
fake local ref, and so the invalidations never happen. gtlb_privs
is documented as being only for guest TLB0, though we already violate
that with E500_TLB_BITMAP.
Now that we have MMU notifiers, and thus don't need to actually
retain a reference to the mapped pages, get rid of tlb_refs, and
use gtlb_privs for E500_TLB_VALID in TLB1.
Since we can have more than one host TLB entry for a given tlbe_ref,
be careful not to clear existing flags that are relevant to other
host TLB entries when preparing a new host TLB entry.
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
Scott Wood [Wed, 13 Feb 2013 19:37:49 +0000 (19:37 +0000)]
kvm/ppc/e500: g2h_tlb1_map: clear old bit before setting new bit
It's possible that we're using the same host TLB1 slot to map (a
presumably different portion of) the same guest TLB1 entry. Clear
the bit in the map before setting it, so that if the esels are the same
the bit will remain set.
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
Scott Wood [Wed, 13 Feb 2013 19:37:48 +0000 (19:37 +0000)]
kvm/ppc/e500: h2g_tlb1_rmap: esel 0 is valid
Add one to esel values in h2g_tlb1_rmap, so that "no mapping" can be
distinguished from "esel 0". Note that we're not saved by the fact
that host esel 0 is reserved for non-KVM use, because KVM host esel
numbering is not the raw host numbering (see to_htlb1_esel).
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBs
This patch fixes a bug where a handful of informational / control CDBs
that should be allowed during ALUA access state Standby/Offline/Transition
where incorrectly returning CHECK_CONDITION + ASCQ_04H_ALUA_TG_PT_*.
This includes INQUIRY + REPORT_LUNS, which would end up preventing LUN
registration when LUN scanning occured during these ALUA access states.
Cc: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Andrea Arcangeli [Wed, 10 Apr 2013 13:28:25 +0000 (15:28 +0200)]
x86/mm/cpa: Convert noop to functional fix
Commit:
a8aed3e0752b ("x86/mm/pageattr: Prevent PSE and GLOABL leftovers to confuse pmd/pte_present and pmd_huge")
introduced a valid fix but one location that didn't trigger the bug that
lead to finding those (small) problems, wasn't updated using the
right variable.
The wrong variable was also initialized for no good reason, that
may have been the source of the confusion. Remove the noop
initialization accordingly.
Commit a8aed3e0752b also erroneously removed one canon_pgprot pass meant
to clear pmd bitflags not supported in hardware by older CPUs, that
automatically gets corrected by this patch too by applying it to the right
variable in the new location.
Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Andy Whitcroft <apw@canonical.com> Cc: Mel Gorman <mgorman@suse.de> Link: http://lkml.kernel.org/r/1365600505-19314-1-git-send-email-aarcange@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge tag 'tty-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg Kroah-Hartman:
"Here are 4 small tty/serial fixes for 3.9.
One fixes a bug where we broke the documentation build, and the others
fix reported problems in some serial drivers.
All have been in linux-next for a while"
* tag 'tty-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: mxser: fix cycle termination condition in mxser_probe() and mxser_module_init()
Revert "tty/8250_pnp: serial port detection regression since v3.7"
OMAP/serial: Revert bad fix of Rx FIFO threshold granularity
tty: Documentation: fix a path in a DocBook template
Merge tag 'stable/for-linus-3.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen fixes from Konrad Rzeszutek Wilk:
"Two bug-fixes:
- Early bootup issue found on DL380 machines
- Fix for the timer interrupt not being processed right awaym leading
to quite delayed time skew on certain workloads"
* tag 'stable/for-linus-3.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/mmu: On early bootup, flush the TLB when changing RO->RW bits Xen provided pagetables.
xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.
Merge tag 'trace-fixes-3.9-rc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Namhyung Kim fixed a long standing bug that can cause a kernel panic.
If the function profiler fails to allocate memory for everything, it
will do a double free on the same pointer which can cause a panic"
* tag 'trace-fixes-3.9-rc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix double free when function profile init failed
Scott Wood [Mon, 18 Feb 2013 18:13:09 +0000 (18:13 +0000)]
kvm/powerpc/e500mc: fix tlb invalidation on cpu migration
The existing check handles the case where we've migrated to a different
core than we last ran on, but it doesn't handle the case where we're
still on the same cpu we last ran on, but some other vcpu has run on
this cpu in the meantime.
Without this, guest segfaults (and other misbehavior) have been seen in
smp guests.
Cc: stable@vger.kernel.org # 3.8.x Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
1) cfg80211_conn_scan() must be called with the sched_scan_mutex, fix
from Artem Savkov.
2) Fix regression in TCP ICMPv6 processing, we do not want to treat
redirects as socket errors, from Christoph Paasch.
3) Fix several recvmsg() msg_name kernel memory leaks into userspace,
in ATM, AX25, Bluetooth, CAIF, IRDA, s390 IUCV, L2TP, LLC, Netrom,
NFC, Rose, TIPC, and VSOCK. From Mathias Krause and Wei Yongjun.
4) Fix AF_IUCV handling of segmented SKBs in recvmsg(), from Ursula
Braun and Eric Dumazet.
5) CAN gw.c code does kfree() on SLAB cache memory, use
kmem_cache_free() instead. Fix from Wei Yongjun.
6) Fix LSM regression on TCP SYN/ACKs, some LSMs such as SELINUX want
an skb->sk socket context available for these packets, but nothing
else requires it. From Eric Dumazet and Paul Moore.
7) Fix ipv4 address lifetime processing so that we don't perform
sleepable acts inside of rcu_read_lock() sections, do them in an
rtnl_lock() section instead. From Jiri Pirko.
8) mvneta driver accidently sets HW features after device registry, it
should do so beforehand. Fix from Willy Tarreau.
9) Fix bonding unload races more correctly, from Nikolay Aleksandrov
and Veaceslav Falico.
10) rtnl_dump_ifinfo() and rtnl_calcit() invoke nlmsg_parse() with wrong
header size argument. Fix from Michael Riesch.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
lsm: add the missing documentation for the security_skb_owned_by() hook
bnx2x: Prevent null pointer dereference in AFEX mode
e100: Add dma mapping error check
selinux: add a skb_owned_by() hook
can: gw: use kmem_cache_free() instead of kfree()
netrom: fix invalid use of sizeof in nr_recvmsg()
qeth: fix qeth_wait_for_threads() deadlock for OSN devices
af_iucv: fix recvmsg by replacing skb_pull() function
rtnetlink: Call nlmsg_parse() with correct header length
bonding: fix bonding_masters race condition in bond unloading
Revert "bonding: remove sysfs before removing devices"
net: mvneta: enable features before registering the driver
hyperv: Fix RNDIS send_completion code path
hyperv: Fix a kernel warning from netvsc_linkstatus_callback()
net: ipv4: fix schedule while atomic bug in check_lifetime()
net: ipv4: reset check_lifetime_work after changing lifetime
bnx2x: Fix KR2 rapid link flap
sctp: remove 'sridhar' from maintainers list
VSOCK: Fix missing msg_namelen update in vsock_stream_recvmsg()
VSOCK: vmci - fix possible info leak in vmci_transport_dgram_dequeue()
...
cifs: Allow passwords which begin with a delimitor
Fixes a regression in cifs_parse_mount_options where a password
which begins with a delimitor is parsed incorrectly as being a blank
password.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>