From: Manu Abraham Date: Mon, 19 Nov 2007 19:44:47 +0000 (-0300) Subject: V4L/DVB (9442): Revert back previous change to 90MHz X-Git-Tag: v2.6.29-rc1~556^2~314 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=f2e52cd17622eed39576f113b77bbd18c577e308;p=~shefty%2Frdma-dev.git V4L/DVB (9442): Revert back previous change to 90MHz Note: * At High Symbol Rates we do not have enouph machine cycles to handle the incoming symbols and hence might run into problems at the very end of the specified definition * Most of the equations have been calculated for a master clock of 99 MHz, running at 90MHz, raises lot of issues such as the need to recalculate all of them , which is eventually very painful. Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index ed9b06b4b30..f996cef79ec 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -965,7 +965,7 @@ static const struct stb0899_s1_reg knc1_stb0899_s1_init_1[] = { { STB0899_GPIO37CFG , 0x82 }, { STB0899_GPIO38CFG , 0x82 }, { STB0899_GPIO39CFG , 0x82 }, - { STB0899_NCOARSE , 0x13 }, /* 0x13 = 27 Mhz Clock, F/3 = 180MHz, F/6 = 90MHz */ + { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ { STB0899_FILTCTRL , 0x00 }, { STB0899_SYSCTRL , 0x00 }, diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 2a1b79d67b6..3507463fdac 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -1154,7 +1154,7 @@ static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = { { STB0899_GPIO37CFG , 0x82 }, { STB0899_GPIO38CFG , 0x82 }, { STB0899_GPIO39CFG , 0x82 }, - { STB0899_NCOARSE , 0x13 }, /* 0x13 = 27 Mhz Clock, F/3 = 180MHz, F/6 = 90MHz */ + { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ { STB0899_FILTCTRL , 0x00 }, { STB0899_SYSCTRL , 0x00 },