From: Yusuke Goda Date: Mon, 30 Aug 2010 10:50:19 +0000 (+0100) Subject: mmc: Allow 2 byte requests in 4-bit mode for tmio_mmc X-Git-Tag: v2.6.37-rc1~52^2~49 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=f1334fb3c3006ba109886158c0ad79512f928bc1;p=~shefty%2Frdma-dev.git mmc: Allow 2 byte requests in 4-bit mode for tmio_mmc Adjust the tmio_mmc block size check to accept 2-byte requests in 4-bit mode if the hardware supports it. Tested with the SDHI hardware block included in sh7724. Signed-off-by: Yusuke Goda Signed-off-by: Matt Fleming Acked-by: Magnus Damm Tested-by: Arnd Hannemann Signed-off-by: Samuel Ortiz --- diff --git a/drivers/mfd/sh_mobile_sdhi.c b/drivers/mfd/sh_mobile_sdhi.c index 01d83a41d57..f1714f93af9 100644 --- a/drivers/mfd/sh_mobile_sdhi.c +++ b/drivers/mfd/sh_mobile_sdhi.c @@ -125,6 +125,12 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) mmc_data->capabilities |= p->tmio_caps; } + /* + * All SDHI blocks support 2-byte and larger block sizes in 4-bit + * bus width mode. + */ + mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES; + if (p && p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) { priv->param_tx.slave_id = p->dma_slave_tx; priv->param_rx.slave_id = p->dma_slave_rx; diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index 1a47221d01a..e7765a89593 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -658,14 +658,21 @@ static void tmio_mmc_release_dma(struct tmio_mmc_host *host) static int tmio_mmc_start_data(struct tmio_mmc_host *host, struct mmc_data *data) { + struct mfd_cell *cell = host->pdev->dev.platform_data; + struct tmio_mmc_data *pdata = cell->driver_data; + pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", data->blksz, data->blocks); - /* Hardware cannot perform 1 and 2 byte requests in 4 bit mode */ - if (data->blksz < 4 && host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { - pr_err("%s: %d byte block unsupported in 4 bit mode\n", - mmc_hostname(host->mmc), data->blksz); - return -EINVAL; + /* Some hardware cannot perform 2 byte requests in 4 bit mode */ + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { + int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES; + + if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) { + pr_err("%s: %d byte block unsupported in 4 bit mode\n", + mmc_hostname(host->mmc), data->blksz); + return -EINVAL; + } } tmio_mmc_init_sg(host, data); diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 24c43bbad54..085f041197d 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -52,6 +52,11 @@ /* tmio MMC platform flags */ #define TMIO_MMC_WRPROTECT_DISABLE (1 << 0) +/* + * Some controllers can support a 2-byte block size when the bus width + * is configured in 4-bit mode. + */ +#define TMIO_MMC_BLKSZ_2BYTES (1 << 1) int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);