From: Chris Ball Date: Tue, 12 Jun 2012 02:06:43 +0000 (-0400) Subject: mmc: dt: Add reg/interrupts to mmc.txt for clarity. X-Git-Tag: v3.6-rc1~153^2~55 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=ed3efc1ccc4421865b64d902cd410f6733c85a49;p=~emulex%2Finfiniband.git mmc: dt: Add reg/interrupts to mmc.txt for clarity. Even though these aren't parsed by the MMC driver, make clear that they're required by the OF core. (Also, a few typo fixes.) Signed-off-by: Chris Ball --- diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 6e70dcde0a7..8a6811f4a02 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -2,13 +2,17 @@ These properties are common to multiple MMC host controllers. Any host that requires the respective functionality should implement them using these definitions. +Interpreted by the OF core: +- reg: Registers location and length. +- interrupts: Interrupts used by the MMC controller. + Required properties: - bus-width: Number of data lines, can be <1>, <4>, or <8> Optional properties: -- cd-gpios : Specify GPIOs for card detection, see gpio binding -- wp-gpios : Specify GPIOs for write protection, see gpio binding -- cd-inverted: when present, polarity on the wp gpio line is inverted +- cd-gpios: Specify GPIOs for card detection, see gpio binding +- wp-gpios: Specify GPIOs for write protection, see gpio binding +- cd-inverted: when present, polarity on the cd gpio line is inverted - wp-inverted: when present, polarity on the wp gpio line is inverted - non-removable: non-removable slot (like eMMC) - max-frequency: maximum operating clock frequency