From: Bruce Allan Date: Fri, 20 Nov 2009 23:27:59 +0000 (+0000) Subject: e1000e: do not error out on identification LED init failure X-Git-Tag: v2.6.33-rc1~388^2~246 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=de39b7523348640f4c0e662e430c67594d858a08;p=~shefty%2Frdma-dev.git e1000e: do not error out on identification LED init failure A failure to initialize the identification LED is not a fatal condition and should allow the init path to continue. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index c5dc1b3be23..474f4e419d2 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -948,10 +948,9 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = e1000e_id_led_init(hw); - if (ret_val) { + if (ret_val) e_dbg("Error initializing identification LED\n"); - return ret_val; - } + /* This is not fatal and we should not stop init due to this */ /* Disabling VLAN filtering */ e_dbg("Initializing the IEEE VLAN\n"); diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index 8a089569c6e..6ba1228836e 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -803,10 +803,9 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = e1000e_id_led_init(hw); - if (ret_val) { + if (ret_val) e_dbg("Error initializing identification LED\n"); - return ret_val; - } + /* This is not fatal and we should not stop init due to this */ /* Disabling VLAN filtering */ e_dbg("Initializing the IEEE VLAN\n"); diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 2c1d08e0443..fe6dc3de9ac 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -2722,10 +2722,9 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = mac->ops.id_led_init(hw); - if (ret_val) { + if (ret_val) e_dbg("Error initializing identification LED\n"); - return ret_val; - } + /* This is not fatal and we should not stop init due to this */ /* Setup the receive address. */ e1000e_init_rx_addrs(hw, mac->rar_entry_count);