From: Jesse Barnes Date: Wed, 12 Oct 2011 22:01:33 +0000 (-0700) Subject: drm/i915: fix transcoder PLL select masking X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=d64311ab4bd8d1c1e984ce3f0e772266dde95380;p=~shefty%2Frdma-dev.git drm/i915: fix transcoder PLL select masking Transcoder A will always use PLL A and transcoder B will use PLL B. But transcoder C could use either, so always mask the select bits off before or'ing in a new value. Reported-by: Adam Jackson Signed-off-by: Jesse Barnes Tested-By: Eugeni Dodonov Reviewed-By: Eugeni Dodonov Signed-off-by: Keith Packard --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2371a8e3804..ed5d4f4d702 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2906,12 +2906,16 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) /* Be sure PCH DPLL SEL is set */ temp = I915_READ(PCH_DPLL_SEL); - if (pipe == 0 && (temp & TRANSA_DPLL_ENABLE) == 0) + if (pipe == 0) { + temp &= ~(TRANSA_DPLLB_SEL); temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); - else if (pipe == 1 && (temp & TRANSB_DPLL_ENABLE) == 0) + } else if (pipe == 1) { + temp &= ~(TRANSB_DPLLB_SEL); temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); - else if (pipe == 2 && (temp & TRANSC_DPLL_ENABLE) == 0) + } else if (pipe == 2) { + temp &= ~(TRANSC_DPLLB_SEL); temp |= (TRANSC_DPLL_ENABLE | transc_sel); + } I915_WRITE(PCH_DPLL_SEL, temp); } @@ -3077,14 +3081,14 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) temp = I915_READ(PCH_DPLL_SEL); switch (pipe) { case 0: - temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); + temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL); break; case 1: temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); break; case 2: /* C shares PLL A or B */ - temp &= ~(TRANSC_DPLL_ENABLE | TRANSB_DPLLB_SEL); + temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL); break; default: BUG(); /* wtf */ @@ -5590,6 +5594,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, temp |= TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL; break; case 2: + temp &= ~(TRANSC_DPLLB_SEL); temp |= TRANSC_DPLL_ENABLE | transc_sel; break; default: