From: Dave Jiang Date: Thu, 5 May 2011 01:07:09 +0000 (-0700) Subject: isci: Converting smp_response to Linux native smp_resp X-Git-Tag: v3.0-rc6~1^2~1^2~113 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=d20930a2b3271b233f4bef3c59ce602dfc9e5d83;p=~emulex%2Finfiniband.git isci: Converting smp_response to Linux native smp_resp Signed-off-by: Dave Jiang Signed-off-by: Dan Williams --- diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index d10c3824dbe..58bf1fb9b2f 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -198,184 +198,6 @@ struct sci_ssp_frame_header { }; -/** - * struct smp_response_header - This structure depicts the contents of the SAS - * SMP DISCOVER RESPONSE frame. For specific information on each of these - * individual fields please reference the SAS specification Link layer - * section on address frames. - * - * - */ -struct smp_response_header { - u8 smp_frame_type; /* byte 0 */ - u8 function; /* byte 1 */ - u8 function_result; /* byte 2 */ - u8 response_length; /* byte 3 */ -}; - - -/** - * struct smp_response_report_general - This structure depicts the SMP Report - * General for expander devices. It adheres to the SAS-2.1 specification. - * - * For specific information on each of these individual fields please reference - * the SAS specification Application layer section on SMP. - */ -struct smp_response_report_general { - u16 expander_change_count; /* byte 4-5 */ - u16 expander_route_indexes; /* byte 6-7 */ - - u32 reserved_byte8:7; /* byte 8 bit 0-6 */ - u32 long_response:1; /* byte 8 bit 7 */ - - u32 number_of_phys:8; /* byte 9 */ - - u32 configurable_route_table:1; /* byte 10 */ - u32 configuring:1; - u32 configures_others:1; - u32 open_reject_retry_supported:1; - u32 stp_continue_awt:1; - u32 self_configuring:1; - u32 zone_configuring:1; - u32 table_to_table_supported:1; - - u32 reserved_byte11:8; /* byte 11 */ - - u32 enclosure_logical_identifier_high; /* byte 12-15 */ - u32 enclosure_logical_identifier_low; /* byte 16-19 */ - - u32 reserved_byte20_23; - u32 reserved_byte24_27; - -}; - -struct smp_response_report_general_long { - struct smp_response_report_general sas1_1; - - struct { - u16 reserved1; - u16 stp_bus_inactivity_time_limit; - u16 stp_max_connect_time_limit; - u16 stp_smp_i_t_nexus_loss_time; - - u32 zoning_enabled:1; - u32 zoning_supported:1; - u32 physicaL_presence_asserted:1; - u32 zone_locked:1; - u32 reserved2:1; - u32 num_zone_groups:3; - u32 saving_zoning_enabled_supported:3; - u32 saving_zone_perms_table_supported:1; - u32 saving_zone_phy_info_supported:1; - u32 saving_zone_manager_password_supported:1; - u32 saving:1; - u32 reserved3:1; - u32 max_number_routed_sas_addresses:16; - - struct sci_sas_address active_zone_manager_sas_address; - - u16 zone_lock_inactivity_time_limit; - u16 reserved4; - - u8 reserved5; - u8 first_enclosure_connector_element_index; - u8 number_of_enclosure_connector_element_indices; - u8 reserved6; - - u32 reserved7:7; - u32 reduced_functionality:1; - u32 time_to_reduce_functionality:8; - u32 initial_time_to_reduce_functionality:8; - u8 max_reduced_functionality_time; - - u16 last_self_config_status_descriptor_index; - u16 max_number_of_stored_self_config_status_descriptors; - - u16 last_phy_event_list_descriptor_index; - u16 max_number_of_stored_phy_event_list_descriptors; - } sas2; - -}; - -/** - * struct smp_response_report_manufacturer_information - This structure depicts - * the SMP report manufacturer information for expander devices. It adheres - * to the SAS-2.1 specification. - * - * For specific information on each of these individual fields please reference - * the SAS specification Application layer section on SMP. - */ -struct smp_response_report_manufacturer_information { - u32 expander_change_count:16; /* bytes 4-5 */ - u32 reserved1:16; - - u32 sas1_1_format:1; - u32 reserved2:31; - - u8 vendor_id[8]; - u8 product_id[16]; - u8 product_revision_level[4]; - u8 component_vendor_id[8]; - u8 component_id[2]; - u8 component_revision_level; - u8 reserved3; - u8 vendor_specific[8]; - -}; - -/** - * struct smp_response_report_phy_sata - This structure depicts the contents of - * the SAS SMP REPORT PHY SATA frame. For specific information on each of - * these individual fields please reference the SAS specification Link layer - * section on address frames. - * - * - */ -struct smp_response_report_phy_sata { - u32 ignored_byte_4_7; /* bytes 4-7 */ - - u32 affiliations_valid:1; - u32 affiliations_supported:1; - u32 reserved_byte11:6; /* byte 11 */ - u32 ignored_byte10:8; /* byte 10 */ - u32 phy_identifier:8; /* byte 9 */ - u32 reserved_byte_8:8; /* byte 8 */ - - u32 reserved_12_15; - u32 stp_sas_address[2]; - u8 device_to_host_fis[20]; - u32 reserved_44_47; - u32 affiliated_stp_initiator_sas_address[2]; - -}; - -#define SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH 1016 -struct smp_response_vendor_specific { - u8 response_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH]; -}; - -union smp_response_body { - struct smp_response_report_general report_general; - struct smp_response_report_manufacturer_information report_manufacturer_information; - struct smp_response_report_phy_sata report_phy_sata; - struct smp_response_vendor_specific vendor_specific_response; -}; - -/** - * struct smp_response - This structure simply unionizes the existing response - * structures into a common response type. - * - * - */ -struct smp_response { - struct smp_response_header header; - - union smp_response_body response; - -}; - -#define SMP_FRAME_TYPE_REQUEST 0x40 -#define SMP_FRAME_TYPE_RESPONSE 0x41 #define PHY_OPERATION_NOP 0x00 #define PHY_OPERATION_LINK_RESET 0x01 diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 7d7bd2e29d8..e6cfcbba9f9 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -53,6 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include #include "sas.h" #include "intel_sas.h" #include "sci_base_state_machine.h" @@ -79,7 +80,7 @@ u32 scic_sds_smp_request_get_object_size(void) { return sizeof(struct scic_sds_request) + sizeof(struct smp_req) - + sizeof(struct smp_response) + + sizeof(struct smp_resp) + sizeof(struct scu_task_context) + SMP_CACHE_BYTES; } @@ -111,7 +112,7 @@ u32 scic_sds_smp_request_get_object_size(void) #define scic_sds_smp_request_get_task_context_buffer(memory) \ ((struct scu_task_context *)(\ ((char *)(scic_sds_smp_request_get_response_buffer(memory))) \ - + sizeof(struct smp_response) \ + + sizeof(struct smp_resp) \ )) @@ -271,8 +272,8 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, task_context->response_iu_lower = 0; } -/** - * This method processes an unsolicited frame while the SMP request is waiting +/* + * This function processes an unsolicited frame while the SMP request is waiting * for a response frame. It will copy the response data, release the * unsolicited frame, and transition the request to the * SCI_BASE_REQUEST_STATE_COMPLETED state. @@ -281,63 +282,52 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, * @frame_index: This parameter indicates the unsolicited frame index that * should contain the response. * - * This method returns an indication of whether the response frame was handled + * This function returns an indication of whether the response frame was handled * successfully or not. SCI_SUCCESS Currently this value is always returned and * indicates successful processing of the TC response. */ -static enum sci_status scic_sds_smp_request_await_response_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) +static enum sci_status +scic_sds_smp_request_await_response_frame_handler( + struct scic_sds_request *sci_req, + u32 frame_index) { enum sci_status status; void *frame_header; - struct smp_response_header *rsp_hdr; - u8 *user_smp_buffer = sci_req->response_buffer; + struct smp_resp *rsp_hdr; + u8 *usr_smp_buf = sci_req->response_buffer; status = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, - &frame_header - ); + &frame_header); /* byte swap the header. */ - scic_word_copy_with_swap( - (u32 *)user_smp_buffer, - frame_header, - sizeof(struct smp_response_header) / sizeof(u32) - ); - rsp_hdr = (struct smp_response_header *)user_smp_buffer; + scic_word_copy_with_swap((u32 *)usr_smp_buf, + frame_header, + SMP_RESP_HDR_SZ / sizeof(u32)); - if (rsp_hdr->smp_frame_type == SMP_FRAME_TYPE_RESPONSE) { - void *smp_response_buffer; + rsp_hdr = (struct smp_resp *)usr_smp_buf; + + if (rsp_hdr->frame_type == SMP_RESPONSE) { + void *smp_resp; status = scic_sds_unsolicited_frame_control_get_buffer( &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, - &smp_response_buffer - ); + &smp_resp); scic_word_copy_with_swap( - (u32 *)(user_smp_buffer + sizeof(struct smp_response_header)), - smp_response_buffer, - sizeof(union smp_response_body) / sizeof(u32) - ); - /* - * Don't need to copy to user space. User instead will refer to - * core request's response buffer. */ - - /* - * copy the smp response to framework smp request's response buffer. - * scic_sds_smp_request_copy_response(sci_req); */ + (u32 *)(usr_smp_buf + SMP_RESP_HDR_SZ), + smp_resp, + (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / + sizeof(u32)); scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); sci_base_state_machine_change_state( &sci_req->started_substate_machine, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION - ); + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION); } else { /* This was not a response frame why did it get forwarded? */ dev_err(scic_to_dev(sci_req->owning_controller), @@ -346,23 +336,20 @@ static enum sci_status scic_sds_smp_request_await_response_frame_handler( __func__, sci_req, frame_index, - rsp_hdr->smp_frame_type); + rsp_hdr->frame_type); scic_sds_request_set_status( sci_req, SCU_TASK_DONE_SMP_FRM_TYPE_ERR, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); sci_base_state_machine_change_state( &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + SCI_BASE_REQUEST_STATE_COMPLETED); } - scic_sds_controller_release_frame( - sci_req->owning_controller, frame_index - ); + scic_sds_controller_release_frame(sci_req->owning_controller, + frame_index); return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h index f5d7e6a5107..83eab467195 100644 --- a/drivers/scsi/isci/sas.h +++ b/drivers/scsi/isci/sas.h @@ -213,4 +213,6 @@ struct smp_req { }; } __packed; +#define SMP_RESP_HDR_SZ 4 + #endif