From: mboton@gmail.com Date: Wed, 30 Jan 2008 12:33:10 +0000 (+0100) Subject: x86: ioport_{32|64}.c unification X-Git-Tag: v2.6.25-rc1~1143^2~302 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=ccafa59a0061d7c44d15d02403120fd02b52c667;p=~emulex%2Finfiniband.git x86: ioport_{32|64}.c unification ioport_{32|64}.c unification. This patch unifies the code from the ioport_32.c and ioport_64.c files. Tested and working fine with i386 and x86_64 kernels. Signed-off-by: Miguel Botón Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 3d23ccd366e..c414c45a0f1 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -10,7 +10,7 @@ CFLAGS_vsyscall_64.o := $(PROFILING) -g0 obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o -obj-y += time_$(BITS).o ioport_$(BITS).o ldt.o +obj-y += time_$(BITS).o ioport.o ldt.o obj-y += setup_$(BITS).o i8259_$(BITS).o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c new file mode 100644 index 00000000000..e723ff3b1d5 --- /dev/null +++ b/arch/x86/kernel/ioport.c @@ -0,0 +1,150 @@ +/* + * This contains the io-permission bitmap code - written by obz, with changes + * by Linus. 32/64 bits code unification by Miguel Botón. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */ +static void set_bitmap(unsigned long *bitmap, unsigned int base, + unsigned int extent, int new_value) +{ + unsigned int i; + + for (i = base; i < base + extent; i++) { + if (new_value) + __set_bit(i, bitmap); + else + __clear_bit(i, bitmap); + } +} + +/* + * this changes the io permissions bitmap in the current task. + */ +asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on) +{ + struct thread_struct * t = ¤t->thread; + struct tss_struct * tss; + unsigned int i, max_long, bytes, bytes_updated; + + if ((from + num <= from) || (from + num > IO_BITMAP_BITS)) + return -EINVAL; + if (turn_on && !capable(CAP_SYS_RAWIO)) + return -EPERM; + + /* + * If it's the first ioperm() call in this thread's lifetime, set the + * IO bitmap up. ioperm() is much less timing critical than clone(), + * this is why we delay this operation until now: + */ + if (!t->io_bitmap_ptr) { + unsigned long *bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); + + if (!bitmap) + return -ENOMEM; + + memset(bitmap, 0xff, IO_BITMAP_BYTES); + t->io_bitmap_ptr = bitmap; + set_thread_flag(TIF_IO_BITMAP); + } + + /* + * do it in the per-thread copy and in the TSS ... + * + * Disable preemption via get_cpu() - we must not switch away + * because the ->io_bitmap_max value must match the bitmap + * contents: + */ + tss = &per_cpu(init_tss, get_cpu()); + + set_bitmap(t->io_bitmap_ptr, from, num, !turn_on); + + /* + * Search for a (possibly new) maximum. This is simple and stupid, + * to keep it obviously correct: + */ + max_long = 0; + for (i = 0; i < IO_BITMAP_LONGS; i++) + if (t->io_bitmap_ptr[i] != ~0UL) + max_long = i; + + bytes = (max_long + 1) * sizeof(unsigned long); + bytes_updated = max(bytes, t->io_bitmap_max); + + t->io_bitmap_max = bytes; + +#ifdef CONFIG_X86_32 + /* + * Sets the lazy trigger so that the next I/O operation will + * reload the correct bitmap. + * Reset the owner so that a process switch will not set + * tss->io_bitmap_base to IO_BITMAP_OFFSET. + */ + tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY; + tss->io_bitmap_owner = NULL; +#else + /* Update the TSS: */ + memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated); +#endif + + put_cpu(); + + return 0; +} + +/* + * sys_iopl has to be used when you want to access the IO ports + * beyond the 0x3ff range: to get the full 65536 ports bitmapped + * you'd need 8kB of bitmaps/process, which is a bit excessive. + * + * Here we just change the flags value on the stack: we allow + * only the super-user to do it. This depends on the stack-layout + * on system-call entry - see also fork() and the signal handling + * code. + */ +#ifdef CONFIG_X86_32 +asmlinkage long sys_iopl(unsigned long regsp) +{ + volatile struct pt_regs *regs = (struct pt_regs *)®sp; + unsigned int level = regs->bx; + unsigned int old = (regs->flags >> 12) & 3; + + if (level > 3) + return -EINVAL; + /* Trying to gain more privileges? */ + if (level > old) { + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + } + regs->flags = (regs->flags & ~X86_EFLAGS_IOPL) | (level << 12); + + return 0; +} +#else +asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs) +{ + unsigned int old = (regs->flags >> 12) & 3; + + if (level > 3) + return -EINVAL; + /* Trying to gain more privileges? */ + if (level > old) { + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + } + regs->flags = (regs->flags & ~X86_EFLAGS_IOPL) | (level << 12); + + return 0; +} +#endif diff --git a/arch/x86/kernel/ioport_32.c b/arch/x86/kernel/ioport_32.c deleted file mode 100644 index 9295e01ff49..00000000000 --- a/arch/x86/kernel/ioport_32.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * This contains the io-permission bitmap code - written by obz, with changes - * by Linus. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */ -static void set_bitmap(unsigned long *bitmap, unsigned int base, - unsigned int extent, int new_value) -{ - unsigned int i; - - for (i = base; i < base + extent; i++) { - if (new_value) - __set_bit(i, bitmap); - else - __clear_bit(i, bitmap); - } -} - -/* - * this changes the io permissions bitmap in the current task. - */ -asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on) -{ - struct thread_struct * t = ¤t->thread; - struct tss_struct * tss; - unsigned long i, max_long; - - if ((from + num <= from) || (from + num > IO_BITMAP_BITS)) - return -EINVAL; - if (turn_on && !capable(CAP_SYS_RAWIO)) - return -EPERM; - - /* - * If it's the first ioperm() call in this thread's lifetime, set the - * IO bitmap up. ioperm() is much less timing critical than clone(), - * this is why we delay this operation until now: - */ - if (!t->io_bitmap_ptr) { - unsigned long *bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); - - if (!bitmap) - return -ENOMEM; - - memset(bitmap, 0xff, IO_BITMAP_BYTES); - t->io_bitmap_ptr = bitmap; - set_thread_flag(TIF_IO_BITMAP); - } - - /* - * do it in the per-thread copy and in the TSS ... - * - * Disable preemption via get_cpu() - we must not switch away - * because the ->io_bitmap_max value must match the bitmap - * contents: - */ - tss = &per_cpu(init_tss, get_cpu()); - - set_bitmap(t->io_bitmap_ptr, from, num, !turn_on); - - /* - * Search for a (possibly new) maximum. This is simple and stupid, - * to keep it obviously correct: - */ - max_long = 0; - for (i = 0; i < IO_BITMAP_LONGS; i++) - if (t->io_bitmap_ptr[i] != ~0UL) - max_long = i; - - t->io_bitmap_max = (max_long + 1) * sizeof(unsigned long); - - /* - * Sets the lazy trigger so that the next I/O operation will - * reload the correct bitmap. - * Reset the owner so that a process switch will not set - * tss->io_bitmap_base to IO_BITMAP_OFFSET. - */ - tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY; - tss->io_bitmap_owner = NULL; - - put_cpu(); - - return 0; -} - -/* - * sys_iopl has to be used when you want to access the IO ports - * beyond the 0x3ff range: to get the full 65536 ports bitmapped - * you'd need 8kB of bitmaps/process, which is a bit excessive. - * - * Here we just change the flags value on the stack: we allow - * only the super-user to do it. This depends on the stack-layout - * on system-call entry - see also fork() and the signal handling - * code. - */ - -asmlinkage long sys_iopl(unsigned long regsp) -{ - volatile struct pt_regs *regs = (struct pt_regs *)®sp; - unsigned int level = regs->bx; - unsigned int old = (regs->flags >> 12) & 3; - struct thread_struct *t = ¤t->thread; - - if (level > 3) - return -EINVAL; - /* Trying to gain more privileges? */ - if (level > old) { - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - } - - t->iopl = level << 12; - regs->flags = (regs->flags & ~X86_EFLAGS_IOPL) | t->iopl; - set_iopl_mask(t->iopl); - - return 0; -} diff --git a/arch/x86/kernel/ioport_64.c b/arch/x86/kernel/ioport_64.c deleted file mode 100644 index ff7514b757e..00000000000 --- a/arch/x86/kernel/ioport_64.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This contains the io-permission bitmap code - written by obz, with changes - * by Linus. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */ -static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value) -{ - int i; - if (new_value) - for (i = base; i < base + extent; i++) - __set_bit(i, bitmap); - else - for (i = base; i < base + extent; i++) - clear_bit(i, bitmap); -} - -/* - * this changes the io permissions bitmap in the current task. - */ -asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on) -{ - unsigned int i, max_long, bytes, bytes_updated; - struct thread_struct * t = ¤t->thread; - struct tss_struct * tss; - unsigned long *bitmap; - - if ((from + num <= from) || (from + num > IO_BITMAP_BITS)) - return -EINVAL; - if (turn_on && !capable(CAP_SYS_RAWIO)) - return -EPERM; - - /* - * If it's the first ioperm() call in this thread's lifetime, set the - * IO bitmap up. ioperm() is much less timing critical than clone(), - * this is why we delay this operation until now: - */ - if (!t->io_bitmap_ptr) { - bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); - if (!bitmap) - return -ENOMEM; - - memset(bitmap, 0xff, IO_BITMAP_BYTES); - t->io_bitmap_ptr = bitmap; - set_thread_flag(TIF_IO_BITMAP); - } - - /* - * do it in the per-thread copy and in the TSS ... - * - * Disable preemption via get_cpu() - we must not switch away - * because the ->io_bitmap_max value must match the bitmap - * contents: - */ - tss = &per_cpu(init_tss, get_cpu()); - - set_bitmap(t->io_bitmap_ptr, from, num, !turn_on); - - /* - * Search for a (possibly new) maximum. This is simple and stupid, - * to keep it obviously correct: - */ - max_long = 0; - for (i = 0; i < IO_BITMAP_LONGS; i++) - if (t->io_bitmap_ptr[i] != ~0UL) - max_long = i; - - bytes = (max_long + 1) * sizeof(long); - bytes_updated = max(bytes, t->io_bitmap_max); - - t->io_bitmap_max = bytes; - - /* Update the TSS: */ - memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated); - - put_cpu(); - - return 0; -} - -/* - * sys_iopl has to be used when you want to access the IO ports - * beyond the 0x3ff range: to get the full 65536 ports bitmapped - * you'd need 8kB of bitmaps/process, which is a bit excessive. - * - * Here we just change the flags value on the stack: we allow - * only the super-user to do it. This depends on the stack-layout - * on system-call entry - see also fork() and the signal handling - * code. - */ - -asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs) -{ - unsigned int old = (regs->flags >> 12) & 3; - - if (level > 3) - return -EINVAL; - /* Trying to gain more privileges? */ - if (level > old) { - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - } - regs->flags = (regs->flags &~ X86_EFLAGS_IOPL) | (level << 12); - return 0; -}